Greetings, Gentle Participants

It seems I can't simply download Adobe Installer and then use it to download Adobe Acrobat Pro XI. The message I get is 'error 106' and I am advised that the download is 'pending.' Rubbish! I have repaired disc permissions on my Mac running 10.9.5 and rebooted. Still getting the same happy horsepucky!
QUESTION: Has anyone actually accomplished a download and run of the 30-day free trial of this software? If so, HOW?
Thanks, Guys!

Troubleshoot Adobe Download Assistant

Similar Messages

Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

Greetings. How do I silence the sounds made when a person enters or leaves a conference via phone. Especially the loud "thud" made when leaving, it's very distracting.

You should be able to turn off the door bell (or similary named feature) with your phone bridge. This is a function of the phone bridge, not Adobe Connect. There is probably a star command to turn the feature off. If we knew what phone provider you used, then a link could be provided to their commands.
As to the loud thud, I'm not sure what you mean by that. Maybe ask your attendees to hang up gently?

TMS 14.4 Not Sending Notice Of End Of Meeting To All Participants (endpoints)

Greetings,
I saw an old post and I thought some clients may be having a similar issue
https://supportforums.cisco.com/discussion/11450416/tms-not-sending-conference-ending-notification-tp-rooms#comment-10118276
In our environment, TMS 14.4 will send notifications that the meeting will end to the master endpoint in a call. It may receive it once or several times. Other endpoints may receive the message once or several times. Older endpoints like the MX series(not Gen1 or Gen2) or Jabber will not receive any notifications.
Typically, this is configurable in TMS with regards to when the notifications are sent out. But we have found that messages are either sent to the control panel (display) or the monitor. If the control panel is a Cisco model then the message is sent to the control panel. If the model is non-Cisco (Crestron) then the message is sent to the monitor.
You can imagine the participants reaction when the call ends. They are not viewing the control panel for notifications but interacting on the call and viewing the monitor.
I thought TMS might be able to utilize "send message to the system" in the Navigator portion. Is there an API I can call and script sending notification messages to the target endpoints?
Thanks.

TMS generally will only send end of conference notifications to endpoints that are managed by TMS, so endpoints such as Jabber will not work with this regardless. Even then, the message will only get sent to whoever is configured as the video conference master. What you're seeing regarding where the message is displayed is correct, and is by design. I don't think there is a way to make it display on the monitor if a Cisco touch panel is used.
Have you looked at the following setting in TMS: Configuration > Conference Settings > Show In-Video Warnings About Conference Ending?
Starting with TMS 14.3, you can set it to send end conference notifications to all endpoints via the MCU or TelePresence Server that is hosting the conference. Since it would send conference ending notifications via the main video channel, everyone would be able to see it no matter what the endpoint is, and whether they are using a Cisco touch panel as well. See the TMS 14.3 release notes, middle of pg 3 for more information.

Greetings. I need to know what to do if a formerly recognized external drive is no longer recognized by my iMac.

Greetings. I could use some advice here.
I bought a WD external hard drive to back-up some files on my old iMac, but I reformatted it & set it up on my new iMac.
After I backed up the files I wanted, I hooked the external drive to the new iMac, but now the new iMac doesn't recognize that external drive.
What should I do?
I also have a flash drive that neither iMac will recognize. Similar issue or no?
Would appreciate any adice I can get on these situations.
Thanks for you time and attention.

You need to deal with your vendor or AppleCare Customer Relations. We can't tell you what to do nor what is possible.
It's unfortunate you have had these problems, but we really cannot resolve them for you. We do not represent Apple nor can we tell you what to do other than attempt to resolve the issue either with your vendor or through Customer Relations.

Auto-Promote Participants to Presenters is not working

Hi All,
I'm new to Adobe Connect and we are test driving it to see if we should use it for trainging as part of our virtual classrooms.
So far I'm really excited by what I see as it seems to be much more training oriented than WebEx.
However, I've come across a really big stumbling block.
I want students to contribute and share without having to individually promote them to presenters.
I found the option under 'Manage Access & Entry' to 'Auto-Promote Participants to Presenters' and thought this issue was solved.
However, it worked the first time I tested it but ever since it does not work.
When someone logs in as a guest they are logged in as a participant and NOT promoted to Presenter.
I've created a new meeting room with the same results.
I've specified that anyone can log in with the link and the 'Auto-Promote' is definately on.
Any ideas about why this is not working?
Many thanks,
Aimee

It sounds like you are using the Meeting Host licensing. This requires that a member of the Meeting Host group must be present in the meeting to fully activate the room functionality. The simple version of that is that no one will have higher than Participant rights until a member of the Meeting Host group joins. Once that condition is satisfied, then all other attendees will be promoted to Presenter, since you have the auto-promote function on.

Issue in implementing Dynamic participant chooser process Step

I am facing issue in implementing Participant chooser process Step.
I want to create dynamic Participant chooser process Step, I have implemented 'ParticipantStepChooser' class and overwrote 'getParticipant' method. But this process did not appear in Dynamic participant chooser dropdown in CQ5.6 environment.
I deployed same code in CQ5.5 and process appeared in Dynamic participant chooser dropdown.
This is the sample code which I have used:
@Component(immediate = true, metatype = true, label = "DMP Config Service123")
@Service
@Properties({
        @Property(name = Constants.SERVICE_DESCRIPTION, value = "A sample implementation of a dynamic participant chooser.", propertyPrivate=true),
        @Property(name = Constants.SERVICE_VENDOR, value = "Adobe", propertyPrivate=true),
        @Property(name = ParticipantStepChooser.SERVICE_PROPERTY_LABEL, value = "******** Hello ********", propertyPrivate=true),
        @Property(name = "immediate" , value = "true", propertyPrivate=true)
public class MyDynamicParticipant implements ParticipantStepChooser {
    private static final String TYPE_JCR_PATH = "JCR_PATH";
    @Activate
void activate(ComponentContext context) {
LoggerUtil.infoLog(this.getClass(), " ");
    public String getParticipant(WorkItem workItem, WorkflowSession workflowSession, MetaDataMap args) throws WorkflowException {
LoggerUtil.infoLog(this.getClass(), "inside getParticipant method{} ");
        WorkflowData workflowData = workItem.getWorkflowData();
        if (workflowData.getPayloadType().equals(TYPE_JCR_PATH)) {
String path = workflowData.getPayload().toString();
String pathFromArgument = args.get("PROCESS_ARGS", String.class);
if (pathFromArgument != null && path.startsWith(pathFromArgument)) {
return "admin";
        return "administrators";

Make sure to change your imports in 5.6 to use granite api. Please change from [1] to [2].
[1]
import com.day.cq.workflow.WorkflowException;
import com.day.cq.workflow.WorkflowSession;
import com.day.cq.workflow.exec.ParticipantStepChooser;
import com.day.cq.workflow.exec.WorkItem;
import com.day.cq.workflow.exec.WorkflowData;
import com.day.cq.workflow.metadata.MetaDataMap;
[2]
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.ParticipantStepChooser;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

Greetings,Currently I am having a big issue to access the "Shop section(tab)" of the website.

Greetings!
I need assistance from you wonderful mac techies out there.
Currently I am having a big issue to access a website's "SHOP section(tab)" within this website.
While in the process of paying for my items in my cart, I received a website message saying something
To the affect that this website is being updated. Your items in your cart will be in your cart.
Then the website's screen kicked me out the door.
A few days later I accessed the main page of this website with no problem.
I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
I click and maneuver from on one tab to another from the main page within this website with no issues.
When I click on the "SHOP section(tab)" within this website to complete my purchase.
Part of this website an error occurs on this "SHOP tab".
"Safari can't connect to the server".
Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
I click on the reload from the view of the toolbar and I can't access this website's "Shop section(tab) at all.
I e-mailed the webmaster of this website a few times, but no response.
In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
Now I am at my wits end as I really need to complete my purchase from this website.
I cannot purchase these items from other websites. Only this website. Good Grief( :
I am at my wits end as I really need to complete my purchase with this particular website.
So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
I can't figure this out (:
No issues with:
* My modem and ethernet connections
* My network provider connection
* Cables and wires
* Power strip unit to protect my electronics.
* Utility bill is up to date.
I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                  Lion: OS X
                                                  Version 10.8.2
                                                  Processor: 2.7 GHz Intel Core i5
                                                  Memory: 8 GB 1600 MHz DDR3
I use Safari: Version 6.0.2 (8536.26.17)
I use the Mail app that shows a postage stamp with the picture of an eagle
                                                  It is the Version 6.2 (1499)
I really need help access the "Shop section(tab)" of the website to complete my purchase.
What is the next step to fix my dilemma?
Thank-you all in advance with your expertise, and patience.
Very Much Appreciated.
With Kindest Regards

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

LSO - Follow-Up Course Participation

Dear All,
When following up a course in SAP LSO, I marked the course participation as 'absent' for ppl who did not turn up for the course. What happens in the system is that a cancellation will be triggered, thus this person will not be reflected in any attendees/participation report. What I need is actually is a report where I can see participants who are absent and present. But, when system cancels the participation, it creates a 040 relationship in table HRP1001, thus there is no way for me to differentiate between someone who cancels before the training, and someone who were absent during the training. Has anyone run into this problem before? Pls advise. Thanks.

PeckHan
You may need to differentiate between these 2 scenarios
A: Attendee Cancels Course Attendance Before Occurence of Course
In this case, user will need to withdraw the attendee from the course before user can perform "follow up" of the course. This is where a cancellation reason can be specified.
B: Attendee Did Not Show Up During Course
In this case, when user select the course to perform "Follow up" from the dynamic course menu, user should be presented with a screen that shall list all course attendees assigned to the course run.
User may mark that the attendee had not show up for the course at this stage. See screen shot (https://wiki.sdn.sap.com/wiki/download/attachments/26779/CourseFollowUp-LSO.jpg)
You may want to ensure that the following config point (IMG>Training & Events Management>SAP Learning Solution>Training Management>Recurring Activities>
Follow-Up>Control of Process Steps) has been appropriately configured such that the attached screen shot appears.
Hope the above information has been helpful.
Thanks

How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.

The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

Same sender id for multiple participant trading partners

Hi All,
Although the scenario is little bit less common, but I have to model a Trading partner setup such a way that multiple participant trading partner will send document with same sender id but they will send the document for different unique receiver id. My question is the scenario can be supported in B2B.Thanks for your help.
Regards.

Hi,
As there cannot be two different person with same identity, similarly there should not be TP's with same Id otherwise you will not be able to identify that from whom you received the message and to where you want to send the message.
Anyways, your use case can be supported in Oracle B2B.
If you want to create multiple identities of a single host then it's very much supported in Oracle B2B.
if you want multiple hosts on same instance then it is possible by using HUB model . Please refer -
Can multiple hosts exist on single instance
I am not very sure whether you can have multiple TP's with same Id but as far as I know it is also possible with Oracle B2B.
Regards,
Anuj

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?

You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)

I have an iPhone5 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod. I am VERY new to all this so be gentle and thanks.

I have an iPhone5, 16 gb and a 120 gb iPod. All my songs won't fit on the iPhone of course. How can I just get some of them on the iPhone? I want to keep all my music on the iPod, but just want SOME of my music on the iphone. I am VERY new to all this so be gentle and thanks.

You Sync the Music you want on the Phone via iTunes on your computer.
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

Dear Apple Good Morning Greetings from me. i use IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem the phone is not open even i cannot enter this phone is says Sign in to ICLOUD but i dont know the password what i do

Apple please help me
Good Morning
Greetings from me.
I used last 3 month IPHONE 5 in bangladesh. but now i facing a problem that is the signing problem
the phone is not open even i cannt enter this phone
is says
Sign in to ICLOUD
Enter the Apple ID password for
but i dont know the password. Please brother help me to use this phone. i brought this phone from some one 355pound. so i am in helpless.i am facing big trouble i dont have enough money for purchase another one. please help me...........................
<E-mail Edited by Host>

You need the previous owner to unlock it, unless they do you have a brick there is no other way .
iPhone was probably stolen if you purchased on eBay, claim and get your money back
See here
http://support.apple.com/kb/HT5818
for explanation of Activation lock
APPLE will not help you

Online conference participants hear echo when cinema display is connected via mini-displayport, even though I am using headphones with mic.

When I use Google Hangout or GoToMeeting, other participants in the meeting hear an echo of their sound -- loud and obtrusive. When I mute, it goes away.
This only happens when I am using my Apple Cinema Display 27" (recent vintage) connected via the mini-displayport (natively, not an adapter).
On my end, i don't hear their echo, but I do hear waves of squelching -- basically it sounds like their end is trying to adjust their input down to account for what it thinks I saying, even though I'm not talking, it's just the echo making that happen.
Sometimes this doesn't occur -- it seems to crop up intermittently, but happens around 75% of the time at some point in a conversation.
I am using iPhone-compatible in-ear earphones with built-in mic; the earphones are the rubber seal type, so there's no sound escaping them that the system should even be able to hear.
I have my audio set up for "Headphones" as output device.
Input device is set up as "External Microphone" -- this part confuses me because even though I know my Cinema Display has a microphone, the OS seems not to list it as a separate input device. So I wonder if it's getting confused trying to use both the cinema display's mic *and* the earphone mic? (see dropdown image)
OS version 10.20.2; Macbook Air 13 inch, "early 2014" and Apple LED Cinema Display 27inch
Earphones are skull-candy brand iPhone compatible (with built-in mic), plugged into the macbook air's earphone jack. (without the display connected, this has always worked fine -- and with a prior non-apple display that had no mic/camera this was not a problem)
This is an ongoing issue in our office, in fact ... especially troublesome in client meetings.
I haven't tried other configurations, other than when using the Cinema Display's USB connector, the same thing happens.
It also happens even when I'm not using the "USB PnP Sound Device" you see listed in the dropdown here -- that's something I use for controlling music output to my desk speakers.
A general question: is there no way to control the cinema display's mic and/or camera more directly?
(EDITED TO ADD: Ok I see in the Cinema Display manual, there should be a listing for "Display Audio" in the input list, but my SysPref panel has none listed. See other screenshot. I wonder if this is the problem??)

Curious, is the 30-inch Cinema Display you have, one listed in this Support Article:
•Apple Cinema Display (20-, 23-, and 30-inch DVI) - Technical Specifications
or is yours a later build series; which one do you have...? This says Mini unsupported.
The specifications vary across the line of Displays, as do the graphic support in Macs.
I'd suspect your version is a later 30-inch display, but it may be one of these. And a
newer 27-inch Display has the Thunderbolt cable.
In any event...
Good luck & happy computing!

Greetings, Gentle Participants

Similar Messages

Maybe you are looking for