Grey screen with file and ? upon startup?4

A grey screen apears with a file folder with a blinking question mark when I try to turn on my macbook, any help?

Go step by step and test.
http://support.apple.com/kb/ts1440
Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH4405
If this does not help, contact Apple.

Similar Messages

  • My hard drive crashed. Replaced my hard drive. Installed Yosemite. Restored from Time Machine most recent backup before hard drive crash. Now laptop won't start up. Grey screen with circle and slash through it.

    How to start up laptop from grey screen with circle and slash through it?

    After you installed Yosemite and prior to restoring from the backup, were you able to start the Mac?

  • MacBook Pro has a grey screen with circle and slash and will not start up or start into safe mode.

    MacBook Pro has started to get a grey screen with circle and slash and will not start up or start into safe mode.  This happened once previously, however, it allowed a safe mode reboot and then worked for a week or so.  While utilzing the machine, it started with the spinning beach ball for about 5 minutes, went into a shut down mode and then rebooted and came back up with the grey screen with a circle and slash after a few minutes.  For the past three days it has been stuck and will not allow it to boot into safe mode.  Any idea or suggestions?

    Try starting the MBP with the OPTION key down.  If you see two HDD icons, select the recovery Icon.  From the 4 option menu, select Disk Utility.  Select Disk Utility>First Aid and run Verify and Repair. 
    If you cannot get into the recovery partition, make an appointment at an Apple store genius bar.
    Ciao.

  • MacBook Pro freezes at startup on grey screen with apple and spinner

    I was on Firefox and suddenly the screen froze. 10-15 minutes later i still couldn't do anything on it so i had to force power my laptop off by holding down the power button. Normally when I have this sort of issue, this will solve it. But when I try to turn my laptop back on it gets to the grey screen with the apple logo and little spinner thing and just stays on that screen forever. I'm not really sure what to do now. A couple articles suggested "reseting the PRAM" and I tried that but it didn't help. If you have any suggestions if really appreciate it. And I'm not really sure if i have everything backed up and I really don't want to lose all my pictures so if you could keep that in mind if you have any ideas I'd appreciate it. thanks!

    emeraldxx wrote:
    But when I try to turn my laptop back on it gets to the grey screen with the apple logo and little spinner thing and just stays on that screen forever.
    Could be problems with the boot drive, corrupted system and or a incompatible/old outdated third party kerenel extension file..
    Run through this list of fixes, it's systematically designed to narrown down your issue.
    ..Step by Step to fix your Mac

  • Grey screen with file folder with face/flashing ?.  Help

    Fri. I did a reinstall and save previous system, because of grey screen on start up and then IMAC freezing after being on energy save for more than 20 mins. I thought I had things fixed but today when I turned the machine on I got the grey screen with a small file folder in the middle of the screen. It has a face which is replaced with a flashing question mark and then back to the face. I would click on it but I have no way to select it.
    I finally got it started with the install disc 1. I have no idea of what to do next.
    Thanks,
    Dick

    Melvin....
    A flashing question mark appears when you start your Mac
    http://docs.info.apple.com/article.html?artnum=106464
    1. Start up from a system CD/DVD, and repair your disk using Disk Utility:
    a. Insert the Mac OS X Install or Restore disc.
    b. Restart the computer, then hold the C key during startup.
    c. From the Apple menu, choose Disk Utility. Do this in the first screen of the Installer. Don't click Continue. If you click Continue in a Mac OS X Installer version earlier than 10.2, you must restart from CD again.
    d. Click the First Aid tab.
    e. Click Repair Disk.
    f. After repairing the disk, try to start from the Mac OS X hard disk.
    Tip: If your hard disk is not available (mounted) when started up from CD, reset the parameter RAM (PRAM) as described in step 3, then repeat these steps. If your hard disk is still not available after resetting PRAM, contact an Apple Authorized Service Provider or Apple Technical Support.
    2. Select your Mac OS X startup disk using either Startup Manager(X key at startup)
    If this doesn't work, go to step 3.
    3. Reset parameter RAM (optioncommand+pr).
    then see if the computer starts up. If it doesn't, repeat step 2.
    4. Reset parameter RAM (PRAM). (command-option-O-F)
    Reset PRAM, then see if the computer starts up. If it doesn't, repeat step 2.
    george

  • Help: grey screen with progress bar at startup, no success repairing in disk utility

    I got my MacBook pro in December 2011 and never had an issue with it until this same thing happened in February 2013.
    Basically, what happens is the computer starts to run really slowly, so I forced shut down. When I tried to power it back on, I can't get past a grey screen with a progrerss bar that doesn't move for about a minute, and then the computer just shuts back off. I tried to some research to figure out how to fix it myself (grateful for my ipad as a back-up computer) but I'm afraid I'm stuck now.
    I tried running disk utility from recovery mode to verify and repair disk, but I only got errors saying "disk utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed up files." When this all happened in February, I bought an external HD for the Genius Bar dude to back up my files and do whatever he did over the course of 3 days to repair my system. Apparently it was only a temporary fix. However, like an idiot, even with all of that hassle, I never set up Time Machine (I know, I know, spare the lecture. I definitely will this time around). I'm really not too concerned about the data on my drive because most of my important stuff is on USB storage/my work computer. However, there are pictures on there that I'd really like to salvage.
    So, before I do the walk of shame back into the Apple Store, can anyone offer a guide for saving my stuff and repairing my hard drive myself? And, if I have a worst case scenario on my hands, how expensive will it be to buy/install a new hard drive?...or just how to prevent it from happening in the future? Thanks in advance.

    Klt10415 wrote:
    I can't get past a grey screen with a progrerss bar that doesn't move for about a minute, and then the computer just shuts back off.
    The fsck drive check at boot is failing to fix your drive, gets stuck and the hardware shuts down the machine if a OS isn't loaded in time.
    "disk utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed up files."
    Yep, it will either have to be replaced or zero erased and completely reformatted and everything installed again.
    Erase, formatting, OS X installs on Mac's
    How to reformat a used Mac
    I never set up Time Machine
    However, there are pictures on there that I'd really like to salvage.
    That's ok, the TimeMachine likely would have backed up the corrupted data and fail to properly restore anyway.
    Since you can boot from RecoveryHD, that means you can install OS X on a blank external powered drive and boot from it and access the internal drive for your files. Or as a last restort install Data Rescue ($100) and that can read even deleted files off the drive bypassing the file system etc.
    .Create a data recovery/undelete external boot drive

  • Grey screen with apple and upate bar

    I am trying to turn on my apple and all it does is goes to grey screen with apple logo and a update bar under it, it acts like it is updating and then just shuts down after it finishes. I restart it and it does the same thing. HELP!!

    Hello rosavoyles,
    The article linked below provides information and troubleshooting steps that can help get your Mac to boot properly again.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    Cheers,
    Allen

  • I have a grey screen with folder and question mark-why?

    When I turn my computer on I see a grey screen with a folder and question mark over it. The folder and question mark are blinking then a couple minutes later the screen turns black. Help please!

    Kfrost5792,
    if your MacBook Pro didn’t originally come with grey installation discs in the box, then you can substitute “booting from Recovery mode” for “booting from your grey Mac OS X Install disc”, and from the OS X Utilities menu that appears on the desktop in Recovery mode, you can select Disk Utility there to erase your internal disk, which will allow you to perform an OS X Internet Recovery the next time that your MacBook Pro is powered up.

  • Macbook Pro does not start. Grey screen with logo and status bar going on forever.

    I have a Macbook Pro, late 2010 running with OS Mavericks. Lately it became very slow but never had major issues like crashing. Lat night, I tried a hard restart because it was stuck and I cannot get it to restart ever since. I get sound and grey screen with logo. The status bar is going on forever but does not boot. Can anyone help, please?

    Try a safe boot:
    http://support.apple.com/kb/HT1564
    If no success, boot into recovery:
    http://support.apple.com/kb/ht1310
    Select the recovery partition and then from the 4 option menu select Disk Utility.
    Open Disk Utility>First Aid and run Verify and Repair.
    What are the results?
    Ciao.

  • Grey screen with apple and endless circle at startup...never going further

    I am hoping someone can help me figure out why my G3 won't go to the desktop page when I try to start it up. I downloaded some updates and then when I went to restart, I could only get the grey apple screen with the little circle going around and it stays that way for hours not going further. Nothing else appears on the screen. There is no message. Someone mentioned a "safe start". Would that be something to try? What could be wrong? Is the computer too old? Did it blow a fuse or something? Help! It was working fine earlier.

    You can try starting in safe mode (see directions below) but I am not optimistic. Should it indeed start up in Safe Mode then you might be able to re-install the package(s) safely 9again, see below) from there.
    Two things seemed to be solutions for Security Update 2008-008 problems from what I have read, and may also work with 2009-01.
    One is Archive and Install which will replace the corrupted system but then requires you reapply all your updates. Select the keep settings and preferences when doing A&I. Make sure you select that option when doing A&I if you want settings and preferences kept. Some third party applications may need reinstalling if they have special components.
    [Mac OS X: About the Archive and Install feature|http://support.apple.com/kb/HT1710?viewlocale=en_US]
    [X-Lab Archive and install|http://www.thexlab.com/faqs/archiveinstall.html]
    [Kappy's A&I instructions|http://discussions.apple.com/thread.jspa?threadID=1823034&tstart=0 ]
    [How to get files from a previous home directory after Archive and Install|http://docs.info.apple.com/article.html?artnum=107297]
    The other is to try to re-install the security update on the main drive while booted from a secondary drive or in Single User Mode. This could be from another Mac computer while your first one is in Target Disk Mode, perhaps a bootable backup drive, or possibly from your installer disc. Here's references for those methods:
    http://discussions.apple.com/message.jspa?messageID=8728797#8728797
    http://discussions.apple.com/message.jspa?messageID=8733921#8733921
    http://discussions.apple.com/thread.jspa?messageID=8634535#8634535
    A version of this is to use Single User Mode and Terminal to re-install the update as in:
    http://discussions.apple.com/message.jspa?messageID=8991074#8991074
    Updating
    Certain steps appear to minimize the risk of an update producing problems.
    Number one is to make sure you have a clone backup of your computer in case you do need to back out of it again. This is the only guaranteed way of not having to worry about the results of an update.
    Some like to boot from their installer discs or an external backup and verify (and if necessary repair) their internal drives as well as drive permissions. This is done with Disk Utility. You can verify a drive while booted from the same drive but sometimes this produces spurious errors. Repairing a drive (if necessary) has to be done while booted from another disk. Permissions repair can, and is probably best, done when booted from your internal drive.
    [Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
    [Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
    [Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
    You can also go to the step of booting into safe mode to do the install.
    [Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
    [What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
    [Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]
    I like to download the update onto my computer and install it from there rather than let Software Update do it. I know a few people who had problems with doing the update via software updater found a manual install to work.
    Repair permissions again afterward.
    It also helps to only install one update at a time and to run the computer for a while to make sure it is behaving well.
    The more cautious even like to unplug third party peripherals (see [comment by BDaqua|http://discussions.apple.com/message.jspa?messageID=9040746#9040746]).
    Almost all of the above steps (except backup) have been questioned as to necessity because probably many people have done successful updates without doing them. I say they can't hurt, they can very likely do good (especially if your computer isn't regularly maintained), so why not do them to be safe.
    [BDaqua's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=8948595#8948595]
    [Baby Boomer's comments on updating problems|http://discussions.apple.com/message.jspa?messageID=9025760#9025760]

  • Grey screen with file folder blinking question mark in middle of folder

    My Macbook suddenly turned off leaving me with a grey screen. In the middle of the screen there is a file folder blinking with a question mark in the middle of the folder. It will not turn back on even if I attempt to restart it. What does this mean and can I fix it myself or must it be sent to apple.

    This may help: A flashing question mark appears when you start your Mac.
    If none of the solutions work then you will need to do an Archive and Install:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Grey screen with smiley face at startup

    Hi all.
    On my son's g3 imac running 9.2 (or maybe 9.?), after trhe startup chimes the screen freezes with a grey screen and a computer icon with a smiley face.
    What does this mean?
    Any ideas on what I can do?
    Thanks for any help,
    Dave

    Well, the smiling face means that the Mac OS operating system was found on the disk. The boot process didn't get too far because soon after you should get the 9.2 logo.
    You might try holding down the shift key after you power on. This will prevent the extensions from being loaded. Perhaps one is bad.
    You could put a 9.2 cd in the machine & boot. Hold down the c key. See if there is some type of file system checker.
    Did your machine come with any diagnostic software? I think mine did. Run it.
    Robert

  • IMac G5 doesn't go past grey screen with apple and spinning gear

    I have an iMac G5 (Ambient Light Sensor) running Mac OS X 10.5.2 Leopard. Last night my computer froze while using QuickTime. I had to force shutdown the computer by holding the power button for 5 seconds after everything else failed.
    Now it won't start. I hear the chime, the apple logo on grey screen appears and I see the spinning gear. But it stays like that indefinitely. I can boot with the Leopard DVD with no problem. I verified/repaired the boot disk. I verified/repaired the permissions. Everything is super fine. Made sure the selected startup disk was the correct one. I can even start up in FireWire Target Mode. I've resetted the PRAM and the SMU. Starting in single user mode also works.
    How can I solve this startup issue. Are there things I could try before resorting to a archive install or clean install of Leopard. My HD is 232GB and I have 197GB of data.
    Thanks for the help.

    I opened the back cover according to the instuctions in the manual to check the internal battery (which is fine and strong according to my little battery tester). I followed the steps in the support article "iMac G5: Troubleshooting when your computer won't turn on". According to the LED, my power supply is fine. I turned on my computer with the back cover off using the internal power button. It turned on, chimed, did the usual SuperDrive sound and did a complete boot. I took a peek at the screen by lifting a corner cause it was laying face down on a soft towel on my bed. And I saw the user prompt asking me my password, and the galaxy theme desktop picture. So I turned this off and placed the cover back on. But it still won't start using the external power button. Thanks with all your help Miriam. I'm now gonna look for a solution with the external power button issue.

  • MacBook Air has black screen with file and question mark

    Some one please help me. My screen on my MacBook Air is black with a flashing file and a question mark. I Can't get past this. What do I do? Thanks.

    Click here and follow the instructions.
    (123289)

  • TS3824 imac g4 (2002) stuck on grey screen with apple and loading sign

    my apple imac g4 2002 wont load up it stays on the gray screen with apple on the front with loading sign underneath.  ive tried almost every way ive seen online to try to factory reset it but nothing works. i got it as a gift a few years back and really need it now. can someone help? please, thanks. Mark

    churpchurp22,
    You are posting on the wrong forum, this forum is for Intel based iMacs. A 2002 G4 would be a PowerPC machine, please post on the correct forum. My guess though is the HD has packed up and crashed. 

Maybe you are looking for