Group By and Detail section should be at same page

Hi
I am developing a Crystal Report in Visual Studio 2005. My report have one Group Section and two detail ( detail a, detail b) sections. In group section I am displaying Test Categories and in Detail Section (detail a) I am displaying Test Result for particular Test Categories, in detail (detail b) section I am conditionally displaying a sub report against a particular testid from detail (a) section.
I want to display all test results against a test category on the same page. If this fit on the page it should display otherwise category name and all its test should be display on next page.
Thanks in advance

Qasim not sure if you have tried this already,
right click on the group (that blue bar) and click Change Group-->Options->Keep Group together.
This will keep them together and if it exceeds one page it will start from the new one.
Hope this helps
Regards
Jehanzeb

Similar Messages

Need to skip page break between header and Detail sections

Hello,
I am combining two reports in one report (one in header section and another report in the body section). when this report is run, there's a page break between these two sections. Is it possible to eliminate it? Ideally I would like the detail section to start as soon as the header section of the report is completed in the same page instead of starting (detail section report) in a new page.
Any help is highly appreciated. Thanks,
Sundar

I'd put them into one section to control the breaks.

Seperating the detail sections to start a new page

I'm using CR XI and I have the main report set up. I want to create a second section containing a seperate set of detail lines. When I insert the section below I now get detail a and detail b. When I do the preview the two sections are combined. I've added the subreport to detail b and tried to find some way to seperate them but nothing appears to say specificially how to do it.
I just want to have the two details sections seperated and start on seperate pages.
It's doing this:
customer id   customer name customer etc.
supplier id supplier name supplier etc.
customer id   customer name customer etc.
supplier id supplier name supplier etc.
I want it do this:
Main Report
customer id   customer name customer etc.
Sub Report
supplier id supplier name supplier etc.
thanks...

I'm afraid that didn't solve my issue. I already have information that needs to be in the footer.
And I'm looking at a report done by someone else and they have 3 seperate detail sections and each section starts on a seperate page, but I can't find what was done to make this happen. Unfortunately, that person is no longer available here.
My thinking is that there is a setting somewhere that will allow this type of seperation.

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shir

sbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files

Merging Page Headers Section and Details Section

Post Author: vikas777
CA Forum: .NET
Hello,
It is for an Invoice Report. I am having a list of values which are directly fetched from a table. There is a column named 'Type' which is having values 'Gas' and 'Water'. The table is having another column named 'values' which will list all values for the Type 'Gas' and 'Water'.Based on the 'Type' we will be displaying 'values' in the detail section. Gas values will be displayed in Details section A and water values will be displayed in Details Section B.
Q1: My requirement is to display like this
Page header for GasDetails section A
Page header for WaterDetails section B
Page header for ElectrictyDetails section c
Q2: I am using the same SProc for fetching values for Gas and Water. (At present I am having values only for type Gas. Just assume that there are five values for Gas. So the SProc returns a total of five datas and these values are displaying correctly. But I am getting five 0.00 values for the type Water.
Here is the sample of code in the formula section used code used:
If Isnull({RptInvoiceSub.Type}) <> True thenIF {RptInvoiceSub.Type} LIKE 'Water' THEN{RptInvoiceSub.value}
Product: Crystal Reports for .NET Framework 2.0
Version: 10.2.3600.0
Operating System(s): Win 2000 Professional
Database(s): SQL Server 2005
Please reply if any part seems to be unclear.
Thanks in advance for any help you can offer.

Post Author: Argan
CA Forum: .NET
This is a report design question so you may want to move it there to get answers.

Details section extends to a whole page when multipage field is printed

Crystal Reports designer in VS 2005 Prof. C#
I have a field which sometimes is large, so it is printed on several pages.
When a field is small, ie. starts and finishes on the same page, then all is OK. I mean, that Details vertical lines and field borders are closed as soon as the last field is fully printed. Report Footer is propely printed after the last Details row.
But when a field occupies several pages then, on the last page, the Details section is not closed after the last row but extends to a whole page.
So, as a result of this behavior, the Report Footer is printed over the Detail's vertical lines. This is my problem.
I tried the following:
1. Change setting Keep Object Together - does not help.
2. Inserting an extra Group Section - Group Footer was printed over on Details body - overlapped.
To show this problem here are 2 pictures. Please pay attention to the column "Odcinki".
[The view with a small field|http://www.zgadzaj.pl/temp/KIM_Dobry.jpg]
[The view with Details expanded to a whole page|http://www.zgadzaj.pl/temp/KIM_Usterka.jpg]
Marek

Hi Trevor and Ludek,
At last success - I found the workaround!
Before my give up, during the downloading time of the PerpetuumSoftware report generator, I tested the last idea which comes from [Joe's help posted in this thread|http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/77b28835-12aa-4592-bcc8-c2b8dbf49317].
I removed all vertical lines from the Detail section and the box surrounding the Detail's section row.
I inserted a new group section which works exactly as the Detail section, so it changes along with Detail section.
I put the vertical lines starting from the GroupHeader section and expanded it across the Detail section to the middle height somewhere inside the GroupFooter. And now I set the line's bottom = 0. It means that it ends exactly at the top of GroupFooter section.
Next, I set the height's of GroupHeader and GroupFooter sections = 0.
The import things are:
- vertical lines (box'es) cannot start in the PageHeader, they must start at top of GroupHeader
- vertical lines (box'es) cannot end in the Detail section, they must end at top of GroupFooter
And now, it works as I expected. Here is the [PDF example|http://www.zgadzaj.pl/temp/KIM_OK.pdf].
Thanks to your advices and support I was able to investigate this problem,
so thank you again for the help.
Regards,
Marek

Interactive report with detail sub-report on the same page

Hi all,
I'm fairly new to APEX, sorry if my question is too obvious. I'm using Apex 4.0.2 on top of Oracle 11.2.
I have an interactive report listing the content of a table. Since there are many columns in that table I would the report to show only a few identifying columns and the complete record currently selected being displayed using another report in a separate region on the same page.
The "Link Column" on the interactive report does almost that except that it jumps on another page; I would like to simply have a sub-report updated with the selected data instead of a new page displayed. Does anyone know how to do that?
Thanks for your help,
Chris

Chris,
this sounds like what I normally do in my referential data.
I use the wizard to create "form with report"
I make sure that both regions (the form and the report) will be set on the same page number
then I check/change the order of the regions (report first, form second)
then I set the form to display in column 2
regards,
Richard
P.S. the report only shows enough columns to recognize the records. the form shows all records

Create a tree node and show the report on the same page

Hi,
I have created a tree for our organization and each node represents a unit. The top one is office level and followed by division and brach.
I have created a reprot on the same page as the tree node.
What I want to do is:
I would like to click a specific node and the report shows only that node and bellow. So, If I click division A and division A has two branch. my report shows only those two braches that bellong to division A.
Can someone help me?
Thank you

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

Collective Delivery Vs Group Delivery and detail steps

Hi, I am new here so apologies if i post something that doesnt belong here. i know there are posts on this topic, however i wanted to have a bit more precised description on this. so i will appreciate if someone can explain it to me.
1. Is Collective delivery = Group delivery?
2. Can Collective / group delivery be done for different sold to, ship to parties, different material, delivery date and shipping points? If yes can somebody plz give me detail steps?
How to process one delivery for multiple sales orders ? (both with same sold to ship to, material, shp point and with different ones)
How can billing be processed when one delivery is created for many orders?
3. How collective / group delivery processed in back ground and upfront? also in batch? will appreciate steps plz.
4. How does "variant" works in delivery creation? the word is Variant is confusing here for me.
Thanks.

Hi SAP SD,
U r correct, U did partial delivery that's the reason document flow show's u delvery is in process.
Once all order quantity will deliver it shows status full.
Reward if it helpful.
Regards
Sasikanth.Ch

I recently updated my iTunes to the new version. For some reason the titles and details of songs on the SONGS page do not appear, although the songs will play. Has anyone else had this problem? Every other page seems to be ok.

I recently updated my iTunes to the new version. When I opened it I found that there were no details listed on the SONGS page. On all other pages the relevant pictures/details appear. Although there are no details showing on the songs page, the songs are obviously there as when you click on a line it plays the song that should be listed. Has anyone else had this problem? (I am using a Windows XP Pro system on my Laptop).

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

Output sound level from gramophone and from computer should be the same

Dear friends,
Why the output sound level isn't equal if we listen the LP directly from the gramophone (AUX1) or from the computer during the recording the track on the computer?
We are using The E-MU 0404 USB 2.0 Audio/MIDI Interface:
http://ixbtlabs.com/articles2/proaudio/emu-0404-usb.html
http://www.emu.com/products/product.asp?product=10447&nav=features
and we have connected E-MU with the (gramohone) speakers through the headphone output on the E-MU and turn the headphone level to the maximum, but the sound level is still lower from the same speakers.
If we compare the track after the recording with the LP on the gramphone is the level of the sound the same/equal.
So we need to have all three sound levels equal:
-from the LP form the gramophone
-from the computer during the recording
-from our track on the hard disk after the recording
Thank you for your answer.

function(){return A.apply(null,[this].concat($A(arguments)))}
Connecting loudspeakers to the headphone output on the E-mu sounds like completely the wrong thing to do altogether - you should
only connect headphones to a headphone output, and nothing else at all.
We will buy the cable as you mentioned and connect it in the line level (S/PDIF).
function(){return A.apply(null,[this].concat($A(arguments)))}
Almost certainly you will need to adjust the monitoring levels in Patchmix to get this the way you want it
Then we will try to adjust the monitoring levels in Patch (I will report if and how did we manage it).
Our equiptment is:
·       turntable Stabi Kuzma audio komponents ( http://www.kuzma.si/AmplioCMS2/public/EnterPublic.cms2?langId=60&request_locale=en_US )
·        Rotel Phono equalizer RQ-970BX,
·        Rotel Stereo integrated amplifaier RA-9858X
·       speakers JMlab Focal Daline 3.1 (nom. impendance 8 Ω, max. power 75 W)

Apple ID for home sharing and iTunes Store should be the same?

I've got 2 iTunes Store accounts, my girlfriend has one, and we're just moving in together.
A few questions ...
Can I create a 4th 'Apple ID' for our home sharing?
Would we still be able to listen to each others libraries?
Would we still be able to copy songs from one another, like I can with my 1 account between computers?
Are there any other downsides to creating a separate account for home sharing?
Thanks for your help.

Can I create a 4th 'Apple ID' for our home sharing?
yes.
Would we still be able to listen to each others libraries?
yes.
a single iTunes can be authorized for up to five iTunes store accounts.
Would we still be able to copy songs from one another, like I can with my 1 account between computers?
yes.
Are there any other downsides to creating a separate account for home sharing?
none i'm aware of.

Can Update and creation be done in the same page

Hi
ADF BC application.
Situation :
I have a search screen , in which the details are shown as Master-inline table.
For the first column in the table ,I have a link,clicking on which takes to the other page for updating that record.
And below the table , I have a Button create which takes to other page for creating a new record.
Questions:
1. Can the update page and Creation page be same? If yes how?
2. How to make the first column into a link?
Note : In update and Creation , I have 2 tables linked i.e., master details.
Please Help.
Thanks.

Hi,
if you simply navigate from one page to the other then the selected row currency is shown in the edit form.
If you execute a operation binding that executes the CreateInsert operation then this will create an empty new row.
The way you do this is:
- create a pageDef entry under the bindings node (StructureWindow)
- Select InsertInto Bindings and choose action binding
- In the editor, give a name to this new binding e.g. CreateInsert and select the CreateInsert operation from the underlying ViewObject
- In ADF Faces -
- add a command link to the UI
- Instead of adding a static navigation case, point teh Action property to a managed bean method
- in teh managed bean method, access the CreatInsert binding, execute it and ten navigate to the next page
FacesContext fctx = FacesContext.getCurrentInstance();
Application app = fctx.getApplication();
ValueBinding vb = app.createValueBinding("#{bindings}");
DCBindingContainer dc = (DCBindingContainer) vb.getValue(fctx);
OperationBinding oper = (OperationBinding) dciter.get("CreateInsert");
oper.execute();
return "<static navigation case to navigate to edit form>"
Frank

Getting Ship To and Bill To info on the same page in Customer's setup

Hello All,
When we import orders into Oracle from an external source, the Bill To and Ship To are getting created on different pages i.e. each line is created for Bill To and Ship to on Addresses tab.
Could you please tell me how can we rectify this error. Or is this a normal functionality.
Thanks a lot.

Hello All,
When we import orders into Oracle from an external source, the Bill To and Ship To are getting created on different pages i.e. each line is created for Bill To and Ship to on Addresses tab.
Could you please tell me how can we rectify this error. Or is this a normal functionality.
Thanks a lot.

Is it possible to store and retrieve request variables from the same page?

I can't seem to get this to work.
In the page constructor to retrieve the variable on reload of the page:
String myReqValue = (String) getValue("#{requestScope.name}");
and in public void beforeRenderResponse() {}
setValue("#{requestScope.name}", some_var);
Of course in th page constructor I check that its not null to know if its the first load of the page.
Regards
Jonathan

Hi,
Your setters and getters looks fine.
This is what i did.
public String button1_action() {
setValue("#{requestScope.name}", "abcd");
return "case1";
In the page constructor .
String check = (String) getValue("#{requestScope.name}");
Just check whether this can help you.

Group By and Detail section should be at same page

Similar Messages

Maybe you are looking for