Group multiple Rows in to one

Hello Guru's
I have requirement where I have to show the Key figure value in one rows instead of multiple rows as shown below. The issue is Planned Time is being pulled from one infoprovider and Actual from Another infoprovider, In one of the infoprovider the values are posted as Not assiged and due to this the result in Bex are shown in two rows. A result (yellow) row on first characteristics sums up the results and shows correctly but requirement is row with Not assigned values should show but Key figure against it (Here 8 against Actual Time) should show on first row instead of second one. I have idea that this done using CKF's but not sure how to use them. I will appreciate your help in this matter.
Current from Bex Report-->
   Job                        |Position                 | Company              | Manager              | Planned Time            |Actual Time
   Exe                         7099                      9383                        ABC                           8
   Not Assigned          7099                       Not Assigned          Not Assigned                                                 8
Expected-->
Job                        |Position                 | Company              | Manager              | Planned Time            |Actual Time
Exe                         7099                      9383                        ABC                           8                                  8

Current
Job
Postion
Company
Manager
Planned
Actual
Exe
new
croat
peter
8
Not Assigned
N/A
Not Assigned
Not Assigned
8
Expected
Job
Postion
Company
Manager
Planned
Actual
Exe
new
croat
peter
8
8

Similar Messages

Depicting multiple rows' data in one row

Hi All,
Pls. check the below query:
select manager_id mg_id, employee_id emp_id, last_name name from employees
where manager_id = '100'
and DEPARTMENT_ID = '80'if i run the following query, then o/p comes row wise; like below:
       mg_id           emp_id            name
       100             145                     Russell
       100             146                     Partners
       100             147                     Errazuriz
       100             148                     Cambrault
       100             149                     Zlotkeybut if i want the o/p like below; i.e; under manager # 100, all employees' emp_id and name should come in only ONE row NOT in multiple rows:
mg_id                   emp_id     name          emp_id       name       emp_id     name        emp_id     name                emp_id         name
100                             145             Russell     146       Partners        147     Errazuriz       148              Cambrault        149        Zlotkeypls. help me to sort out the above sought o/p.
kindly tell me if there is any posting guidelines (except "Plain Text Help" on the right side) in this forum. i tried a lot to post above two o/p in easily readable format, but couldn't do that.
Edited by: Shariful on Sep 20, 2009 4:28 AM
Edited by: Shariful on Sep 20, 2009 4:29 AM

Hi,
Shariful wrote:
Hi All,
Pls. check the below query:
select manager_id mg_id, employee_id emp_id, last_name name from employees
where manager_id = '100'
and DEPARTMENT_ID = '80'
if i run the following query, then o/p comes row wise; like below:
mg_id           emp_id            name
100     145     Russell
100     146     Partners
100     147     Errazuriz
100     148     Cambrault
100     149     Zlotkey
but if i want the o/p like below; i.e; under manager # 100, all employees' emp_id and name should come in only ONE row NOT in multiple rows:
mg_id                   emp_id     name          emp_id       name       emp_id     name        emp_id     name                emp_id         name
100     145     Russell     146     Partners     147     Errazuriz     148     Cambrault     149     ZlotkeyIf you want all the emp_ids and names concatenated into one big VARCHAR2 column, that's called String Aggregation
[AskTom.oracle.com|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2196162600402] shows several different ways to do it.
You can format that one big column so that it looks like separate columns.
If you want each emp_id and name in its own column, that's called Pivoting .
Look up "pivot" for various techniques. If you do not know exactly how many rows were in the original query (and therefore how many columns you'll need in the output), then it will require Dynamic SQL , which can be complicated.
Unfortunately, when you do search for "pivot", mlost of the hits will be things like "Search for pivot and you'll get lots of examples".
Re: Help for a query to add columns is one that actually has some information. It was a question very much like yours.
kindly tell me if there is any posting guidelines (except "Plain Text Help" on the right side) in this forum. i tried a lot to post above two o/p and query in easily readable format, but couldn't do that.Type these 6 characters:
(small letters only, inside curly brackets) before and after formatted text, to preserve spacing.

10GR2 - How can I load multiple row values into one field?

Hi
Can anyone please help with a problem I'm having with merging data.
The source table has multiple entries for the same Id e,g,
ID Code
1 123
1 234
2 123
2 567
The output should only have one row per ID e.g.
ID Code_List
1 123;234
2 123;567
Do you know what operator I could use that would allow me to do this? I've looked at unpivot but I think I would need multiple output fields (one for each Code). I have to concatinate the codes and separate with a semi-colon.
Thanks
GB

Q) Input data
=============
COL_0,COL_4
1235,"G0123,G124,G25,G6"
1236,"G01,G23,G124,G25,G6"
1237,"G0123,G1,G24,G25,G6"
1238,"G,G0123,G124,G25,G6"
1239,"G0123124,G256"
Output
======
TEST_ID,TEST_VAL
1235,G0123
1235,G124
1235,G25
1235,G6
1236,G01
1236,G23
1236,G124
1236,G25
1236,G6
1237,G0123
1237,G1
1237,G24
1237,G25
1237,G6
1238,G
1238,G0123
1238,G124
1238,G25
1238,G6
1239,G0123124
1239,G256
I wrote this procedure...
declare
rcd_cnt number;
test_id123 number;
junk_1 number;
cd_occurences number;
child_count number;
str_abc varchar2(200);
char_pos     number default 0;
cd_temp_str varchar2(50);--:= 'G0123,G124,G25,G6';
begin
select nvl(count(col_4),0) into rcd_cnt from test_ee where col_4 is not null;
for aa in 1 .. rcd_cnt loop
select col_0,rownum rn,nvl(trim(col_4),0) into test_id123,junk_1,cd_temp_str from (select col_0,rownum rn,col_4 from test_ee where col_4 is not null) where rn = aa;
--dbms_output.put_line('...I am in for loop...' || cd_temp_str);
     --dbms_output.put_line('===================' || rcd_cnt || '.................' ||aa);
cd_occurences := length(cd_temp_str) - length(replace(cd_temp_str,','));
dbms_output.put_line(cd_temp_str || '...Str Occurences are ...'||cd_occurences ||'**************'||test_id123);
child_count :=0;
for z in 1..length(cd_temp_str)+1 loop
child_count := child_count+1;
     if(instr(cd_temp_str,',') > 0) then
     char_pos := instr(cd_temp_str,',',1,1);
          str_abc := substr(cd_temp_str,1,char_pos-1);
     dbms_output.put_line('..Partial String of..'|| z ||'..is.....' || str_abc);
          insert into test_xx(test_id,test_val) values(test_id123,str_abc);
     end if;
     cd_temp_str := substr(cd_temp_str,char_pos+1,length(cd_temp_str));
     if(cd_occurences=child_count) then
     dbms_output.put_line('..Partial String of..is.....' || cd_temp_str);
          insert into test_xx(test_id,test_val) values(test_id123,cd_temp_str);
     end if;
end loop; -- close for of z */
--dbms_output.put_line('...I am in end for loop...');
     end loop; -- close for of aa
end;
instead of procedure,is there any way from sqlqery.

How to get multiple row values in one text box while clicking one row from grid?

hi friends,
           i am working on flex4 web application i am using one datagrid ,it have two records(bills),one button and one text box.
ex:
customername      salesrepname   receipt no      amount
venkat                         raj                         1102          10000
ramu                          ramesh                   1102         20000
here both receipt no is same.now i want to select one of this receipt and click pay button which is place in outside the grid.
now my need is after click the pay button in text box i need 10000+20000=30000,after click that button i want both receipts should be invisible...'
how i will do this,
any suggession,
Thanks
B.venkatesan

One way with 10g:
select mgr,
       rtrim(xmlagg(xmlelement(empno,empno||',').extract('//text()')),',') emps
from emp
where mgr is not null
group by mgr;10g:
-- define this function:
create or replace
function concatenate(c Sys_refcursor, sep varchar2 default null) return varchar2
as
val varchar2(100);
return_value varchar2(4000);
begin
-- open c;
loop
fetch c into val;
exit when c%notfound;
if return_value is null then
    return_value:=val;
else
    return_value:=return_value||sep||val;
end if;
end loop;
return return_value;
end;
select mgr,
       concatenate(cursor(select empno from emp e where e.mgr=emp.mgr order by empno),',')
from emp
where mgr is not null
group by mgr;With 11g:
select mgr,
       listagg(empno,',') within group (order by empno) emps
from emp
where mgr is not null
group by mgr;

Merging multiple Rows in to one In Table.

Hi Friends,
In Our application we are maintaining one table which has 12 rows with 12 different values (All are Read only).
Based On Some condition the number of rows changes. The maximum number of rows possible with diffrent vaues is 11. but as soon as the number of rows become 12 all the values become similar. means all the values are same. so what i want is, in this condition i want to display only one row instead of 12 rows. how can i marge those 12 rows..??
Thanks & Regards
Jeetendra

I think you just need to break down the approach into two:
1) basic merging of data based on the categories you mentioned. put them in an a Collection family object and merge from there.
2) dynamic UI programming for the table
That's what I see at least. Goodluck!
Regards,
Jan

Selecting Multiple rows

Ok I have three tables which two tables are one to one and
the other one is a one to many. The one to one tables have all the
data in one row and the one to many has the data in multiple rows.
The one to many table (named county_notes) has notes about specific
counties. The other tables (named county_bio and county_stats) have
different information about each county. The three tables are
connected by an ID.
What I want to be able to list the county information and the
notes about each county in the same report.
For example:
Record1
County: Craven
Phone: (252)123-4567
Notes:
Judy is nice
John is mean
The tables would like this:
county_bio
ID county_name
1 craven
county_stats
ID county_phone
1 (252) 123-4567
county_notes
ID notes
1 Judy is nice
1 John is mean
Obviously the above tables are just examples but you get the
idea of how the tables are set up. The problem is I can join the
county_notes table to one of the two using tables, so that is
problem one. Problem 2, Coldfusion separates each note into a
different record. So I end up with record "craven" showing up twice
(once with the note about judy, and once with the note about john).
Here is the SQL that joins county_bio and county_notes:
SELECT *
FROM county_bio
LEFT JOIN county_notes
ON county_bio.ID = county_notes.county_ID
First how do I get all three tables connected? And second how
do I get ColdFusion to print each note about the county in one
record?
Thanks for any and all help! I have been working on this for
a few days and am out of ideas.

quote:
Originally posted by:
wbnc1902
THANK YOU SO MUCH!!!! This was a big help. Forgive me for
being new at SQL but can you explain why there is a ( ) around the
inner join in the from statement? My only guess is it is some sort
of subquery that joins those two tables together into one virtual
table and then joins that table with the county_notes table
creating one big virtual table.
Am I even close?
In this particular case, the brackets were not necessary.
But, obviously they didn't hurt.
The concept you are describing has many names. I call it
joining to a subquery. Others call it creating tables on the fly or
derived tables. The syntax is
select stuff
from a_table join (select etc) alias_name on a_table.field =
alias_name.field
etc

Expand & Collapse groups of rows like an outline?

Is it possible to have a group of rows collapse into one as if it were an outline?

There is no way to "collapse" a group of rows because there is no inherent outline hierarchy in them.
However, you can create rows that duplicate any level of an outline structure, order rows below them as if they were elements of that structure, & hide whatever rows you don't want to see. Unfortunately, revealing hidden rows is an all or nothing process, so this won't function like it would in an outline.
You can create something more like a collapsable outline structure by using the bullet options in the Text Inspector & checking or not checking the 'Wrap Text in Cell' option.

Multiple Flex Apps on One Page

Now that I've been laid off from Adobe (along with 700 others), I would like to seek Flex consulting opportunities, and one possibility is with web designers/developers wishing to offer their clients value added components.
My question is that I heard you don't want for example three separate Flex apps on one web page, as it results in three instances of the Flash Player generated, or something like that.
So is it necessary to group multiple Flex components into one Flex app to each web page? This can limit placement of Flex components on a web page, because the web page will not be completely done in Flex, as the page must be searchable.
Any insight on this, particularly from Alex and others on the Flex product team at Adobe.
Anyone new to Flex needs help on Flex components/applications, I'm available: [email protected]
Thanks!
Greg

IMHO, it is all about memory. Lots of pages have multiple flash players running banner ads. That's because those ads are small. If you're going to stick a couple of really small flex apps on a page, I would expect most folks have enough computer resources to handle that. Once you get more complex, your apps also likely take up more screen real-state and soon you're looking at a portal and probably should have one main shell that loads sub-apps.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

How to pivot horizontally Author names, and group by Book title. One row per book with multiple authors

I have 3 tables - Book, Author, BookAuthorReference
A book can have multiple authors, and when I do straight query I get multiple rows per book
SELECT <columns>
FROM Book b, Author a, BookAuthorReference ba
where ba.BookId = b.BookId and
ba.AuthorId = a.AuthorId
I want to get the results as ONE row per book, and Authors separated by commas, like:
SQL 2008 internals book    Paul Randal, Kimberly Tripp, Jonathan K, Joe Sack...something like this
Thank you in advance

This can by done by straying into XML land. The syntax is anything but intuitive, but it works. And moreover, it is guaranteed to work.
SELECT b.Title, substring(a.Authors, 1, len(a.Authors) - 1) AS Authors
FROM   Books b
CROSS APPLY (SELECT a.Author + ','
FROM   BookAuthorReference ba
JOIN   Authors a ON a.AuthorID = ba.AuthorID
WHERE ba.BookID = a.BookID
ORDER BY ba.AuthorNo
FOR XML PATH('')) AS a(Authors)
Erland Sommarskog, SQL Server MVP, [email protected]

Collecting data from multiple rows into one column

I'd like to run a query and put a collection of items into one output column instead of multiple rows. See the example below:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
PL/SQL Release 10.2.0.5.0 - Production
"CORE     10.2.0.5.0     Production"
TNS for 32-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
     CREATE TABLE "SKIP"."INGREDIENTS"
   (     "INGRED_ID" NUMBER,
     "INGRED_NAME" VARCHAR2(20 BYTE),
     "STORES" VARCHAR2(20 BYTE)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.INGREDIENTS
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (1,'SEA SALT','Food lion');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (2,'TABLE SALT','Food lion');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (3,'FLOUR','Piggly Wiggly');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (4,'YEAST',null);
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (5,'BEER','ABC Store');
CREATE TABLE "SKIP"."PRETZELS"
   (     "PRETZEL_ID" NUMBER,
     "PRETZEL_NAME" VARCHAR2(20 BYTE),
     "PRETZEL_DESC" VARCHAR2(100 BYTE)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.PRETZELS
Insert into SKIP.PRETZELS (PRETZEL_ID,PRETZEL_NAME,PRETZEL_DESC) values (1,'CLASSIC','Classic knot pretzel');
Insert into SKIP.PRETZELS (PRETZEL_ID,PRETZEL_NAME,PRETZEL_DESC) values (2,'THICK STICK','Straight pretzel, abt 1/2" in dia');
CREATE TABLE "SKIP"."INGRED_XREF"
   (     "PRETZEL_ID" NUMBER,
     "INGRED_ID" NUMBER
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.INGRED_XREF
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,1);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,2);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,4);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,2);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,3);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,5);
-- Constraints for Table INGRED_XREF
ALTER TABLE "SKIP"."INGRED_XREF" MODIFY ("PRETZEL_ID" NOT NULL ENABLE);
ALTER TABLE "SKIP"."INGRED_XREF" MODIFY ("INGRED_ID" NOT NULL ENABLE);
{code}
Desired output (note how the ingredients are all listed in one column, separated by commas):
{code}
PRETZEL_ID PRETZEL_NAME     PRETZEL_DESC                        INGREDIENTS
1          CLASSIC          Classic knot pretzel                SEA SALT, TABLE SALT, YEAST
2          THICK STICK      Straight pretzel, abt 1/2" in dia   TABLE_SALT, FLOUR, BEER

See the FAQ : {message:id=9360005}
Especially links concerning string aggregation.

I wanted to display the multiple rows in one row but column should be diff

Hi
Could any body help me regarding this query how to write to get the multiple rows in one row.
eg.
i have one table tab1(eno number,ename varchar2,uid1 varchar2,uid2 varchar2,uid3 varchar4)
but when i am runing the query I am getting multiple record against one eno number because of uid1,uid2,uid3
suppose value of table is
eno ename uid1 uid2 uid3
1 a u1
1 a u2
1 a u3
when i am quering it is coming same as above but I want in one row
eno ename uid1 uid2 uid3
1 a u1 u2 u3
can any onle help me how to write the query for this requirement.
thanks
saif

which is hard coded in my code? Here another approach, but fail for c as there is no information for the value of a column: does 1 in u1 means col 1, etc.
/* Formatted on 2012/05/29 16:29 (Formatter Plus v4.8.8) */
WITH t AS
     (SELECT 1 col1, 'a' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u3' col3
        FROM DUAL)
SELECT   xx.col1, xx.col2, MAX (DECODE (xx.rn, 1, col3)) AS uid1, MAX (DECODE (xx.rn, 2, col3)) AS uid2,
         MAX (DECODE (xx.rn, 3, col3)) AS uid3
    FROM (SELECT t.col1, t.col2, t.col3, ROW_NUMBER () OVER (PARTITION BY col1, col2 ORDER BY col3) rn
            FROM t) xx
GROUP BY col1, col2;output:
COL1     COL2     UID1     UID2     UID3
1     a     u1     u2     u3
1     b     u1     u2     u3
1     c     u1     u3
Edited by: ʃʃp on May 29, 2012 2:30 AM

How can i select some row from multiple row in the same group of data

I want to select some row from multiple row in the same group of data.
ColumnA
Column B
1 OK
1 NG
2 NG
2 NG
3 OK
3 OK
I want the row of group of
ColumnA if ColumnB contain even 'NG'
row , select only one row which Column B = 'NG'
the result i want =
ColumnA Column B
1 NG
2 NG
3 OK
Thank you

That's some awful explanation, but I think this is what you were driving at:
DECLARE @forumTable TABLE (a INT, b CHAR(2))
INSERT INTO @forumTable (a, b)
VALUES
(1, 'OK'),(1, 'NG'),
(2, 'NG'),(2, 'NG'),
(3, 'OK'),(3, 'OK')
SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
FROM @forumTable f
LEFT OUTER JOIN @forumTable f2
ON f.a = f2.a
AND f.b <> f2.b
GROUP BY f.a

TimesTen SQL with group by returning multiple rows

I have a Active-Standby TimesTen nodes.
Using group by with or without having clause:
Whenever I do a group by query on table1 table with or without having clause, SQL returns multiple rows. This looks very strange to me. Each time it gives different count
Command> select count(*) from table1 group by pname having pname='pool';
< 390400 >
1 row found.
Command> select count(*) from table1 group by pname having pname='pool';
< 390608 >
< 32639 >
2 rows found.
Command> select count(*) from table1 group by pname having pname='pool';
< 2394 >
< 351057 >
2 rows found.
Command> select count(*) from table1 group by pname having pname='pool';
< 305732 >
1 row found.
Command> select count(*) from table1 group by pname having pname='pool';
< 420783 >
1 row found.
Command> select count(*),pool_name from root.rms_address_pools group by pool_name order by pool_name;
< *435473, pool* >
< *32313, pool* >
< 453, smvG3 >
< *28980, pool* >
< 3786, smvG4 >
< *26025, pool* >
< 236120, smvG6 >
< 131455, smcG3 >
< *65150, pool* >
< 23, snt1G1 >
< 510, snt2G1 >
< 510, snt2G2 >
Using where clause:
Command> select count(*) from table1 where pname='pool';
< *442354* >
1 row found.
Command> select count(*) from table1 where pname='pool';
< 442354 >
1 row found.
Table description:
Command> desc table1;
Table table1:
Columns:
*IP_ADDRESS BIGINT NOT NULL
PNAME CHAR (32) NOT NULL
SITEID TINYINT NOT NULL
1 table found.
ttVersion:
bash-3.00# ./ttVersion
TimesTen Release *7.0.3.1.0 (64 bit Solaris)* (tt70:17001) 2007-10-30T22:17:07Z
Instance admin: root
Instance home directory: /TimesTen/tt70
Daemon home directory: /var/TimesTen/tt70
bash-3.00#
Could any one suggest what is wrong with my SQL? or is it a bug with TimesTen?
Many thanks in advance.
Br,
Brij

Hi Gena,
When i execute the query with where clause, it gives me the output with more than one pool:
Command> select pname, count (*) from table1 where pname='pool' group by pname ;
< smcG3 , 18836 >
< pool , 423527 >
2 rows found.
Command> select pname, count (*) from table1 where pname='pool' group by pname ;
< intG302 , 17202 >
< pool , 425159 >
2 rows found.
While if give use the having clause it gives me multiple rows for one pool only ( sometimes) :
select pname, count (*) from table1 group by pname having pname='pool';
< pool , 32686 >
< pool , 420445 >
2 rows found.
select pname, count (*) from table1 group by pname having pname='pool';
< pool , 393574 >
< pool , 5838 >
< pool , 110943 >
3 rows found.
Command> select pname, count (*) from table1 group by pname having pname='pool';
< pool , 414590 >
< pool , 8395 >
2 rows found.
Please suggest what can be done in this case, need i open a case with Oracle for this.
Regards, Brij

Passing multiple rows from one action to another

Hi,
I've build a Guided Procedure Process with two actions. Both actions call a Visual Composer Model (deployed as Flex).
The Processdesign is:
Process
---Block
Action 1
CO 1 as VC Model (Flex)
Action 2
CO 2 as VC Model (Flex)
From the first vc model I want to pass multiple rows (its a vc table) to the second vc model. Therefor I've group the out-going parameters from model 1 with the in-coming parameters from model 2 at the block-level.
Now, when I start my process I have two results in the table of vc model 1 and will pass them to model 2. But only one record (always the first) is shown at model 2.
Can you say me the reason for this? Have I configured the parameter-grouping false? Or isn't it possible to pass multiple rows at guided procedures?
I'm using Visual Composer 7.0 and Guided Procedures 7.0 technology.
Thanks in advance
Claudia

hi,
Do structure mapping to pass row values
Thanks
Gopal

How Do I Group Multiple Disks as One Album?

I've got the latest iTunes update, 11.0.4, and as with the update before it, I'm supposed to be able to group multiple disks as one album, but I can't figure out how, and can't find any directions at Apple.
I've lately begun ripping my large collection of symphonies and operas on CD into iTunes. Operas especially almost always come on two, three, or even four CD's, BUT IT'S ALL THE SAME OPERA, and the CD's come in the same boxed set. On top of that, there really aren't any "tracks" in an opera; the plot and the music unroll seamlessly from beginning to end (that sometimes takes 5 or 6 hours, which goes with the operatic territory).
On my CD player, I'm used to a pause between disks, but now that I've figured out how to get the "tracks" on each CD to play in order on iTunes (not so intuitive), I'd like to be able to go from the last "track" on Disk 1 to the first track on Disk 2 without interruption, since the technology should be able to support that option.
In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3." No joy. So I've tried erasing the first element, 1, 2, 3, and just leaving the total number of disks. Again, no joy.
Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks. Doesn't work.
Has anyone else been afflicted with the same problem?
Has anyone got a solution?

Have you seen this helpful article:
Grouping tracks into albums:
http://samsoft.org.uk/iTunes/grouping.asp
In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3."
That is correct. Don't erase the first element, 1, 2, 3, that should not matter.
Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks.
Also correct. Also chec, if the "Sort album name" is the same.
Do the artists differ on the tracks?
Then set the "Album Artist" on all CDs to the same name (Various Artists), also check, if the album sort artists names differ.

Group multiple Rows in to one

Similar Messages

Maybe you are looking for