Grouping Radio Buttons on a Dialog Box

Hi,
Sorry to post this, I could not get any doc that could help.
I have three groups of radio buttons in a dialog box and, I set the Group property of each of the first radio button in a group to true. But it does not seem to work. Did I miss something?
Thanks for your help.

Found the solution:
I Used 'ADMRadioGroupSuite1' Suite - RadioGroupSuite ("ADM Radio Group Suite") to group them.

Similar Messages

Using CheckBox / Radio-Button Control in Dialog Program

Dear Friends,
Please let me know the way to use check-box / radio-button control in dialog programs. Where & how to define them & write the logic.
If possible provide a small example.
Regards,
Alok.

Hi,
goto tcode abapdocu.. abap user dialogs - screens-processing screens you will get examples for all --pushbutt6ons radiobutton checkboxes everything
here is a sample code for you
PROGRAM demo_dynpro_check_radio .
DATA: radio1(1) TYPE c, radio2(1) TYPE c, radio3(1) TYPE c,
 field1(10) TYPE c, field2(10) TYPE c, field3(10) TYPE c,
 box TYPE c.
DATA: ok_code TYPE sy-ucomm,
 save_ok TYPE sy-ucomm.
CALL SCREEN 100.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'RADIO'.
 IF radio1 = 'X'.
 field1 = 'Selected!'.
 CLEAR: field2, field3.
 ELSEIF radio2 = 'X'.
 field2 = 'Selected!'.
 CLEAR: field1, field3.
 ELSEIF radio3 = 'X'.
 field3 = 'Selected!'.
 CLEAR: field1, field2.
 ENDIF.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
flow logic:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE user_command_0100.
regards,
pankaj singh.

reward if helpful

Pointer does not move to the default button in the dialog box

example: when cleaning out trash the pointer does not go to the default button in the dialog box, you have to manually go there.
This happens all the time.

Hi Abhishek,
In SAP this job shows completed till the 3rd step. and no error in the job log. but it does not execute the 4th and the 5th steps. And in Redwood, it shows completed for 1st and 2nd steps, 3rd step is in Error but has no error log. The 4th and 5th steps are in chained status. I have not amended the job chain after import. I have just scheduled it as it was running in the SAP system.
Let me know if you need some further information on this.
Regards
madhu

Upgrade to Acrobat Pro XI on Window 8.1 downloads, installs and configures. Then pressing the launch button in the dialog box doesn't launch program.

Upgrade to Acrobat Pro XI on Window 8.1 downloads, installs and configures. Then pressing the launch button in the dialog box doesn't launch program.

Using the start button, Acrobat Pro should appear. But it might not, being Windows 8. Maybe it puts an icon on your desktop, maybe not.
How about checking c:\program files (X86)\adobe\acrobat 11.0\acrobat. If you have this folder, look for Acrobat.exe.

Group radio button itemrenderers of two different lists

Hello ,
How do I group radio button item-renderers of two different lists? If i select a radio button of list 1, then the list 2 Radiobutton which was selected previously should be un-selected. How to do?

Are you looking for something like this:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark">
 <fx:Declarations>
 <fx:Component className="MyRenderer">
 <s:ItemRenderer>
 <s:RadioButton id="rb" label="{data}" group="{outerDocument.rbg}" width="100%" height="100%" />
 </s:ItemRenderer>
 </fx:Component>
 <s:RadioButtonGroup id="rbg" />
 </fx:Declarations>
 <s:List id="myList" itemRenderer="MyRenderer">
 <s:dataProvider>
 <s:ArrayList>
 <fx:String>0</fx:String>
 <fx:String>1</fx:String>
 <fx:String>2</fx:String>
 </s:ArrayList>
 </s:dataProvider>
 </s:List>
 <s:List id="myList2" x="150" itemRenderer="MyRenderer">
 <s:dataProvider>
 <s:ArrayList>
 <fx:String>A</fx:String>
 <fx:String>B</fx:String>
 <fx:String>C</fx:String>
 </s:ArrayList>
 </s:dataProvider>
 </s:List>
</s:Application>

Tooltip for buttons on Confirmation Dialog Box

Hi,
How can we set the tooltips for buttons on the Confirmation Dialog Box.
Pls throw some light on it.
Rgds
Shashank

Found the solution:
I Used 'ADMRadioGroupSuite1' Suite - RadioGroupSuite ("ADM Radio Group Suite") to group them.

How to Use Switch Statement with Exclusion Group (radio buttons)?

Wouldn't you know, just when I though I'd really be making progress, I've come across another problem I can't solve. In a homeowners insurance application I am building, there is an exclusion group that needs to set the value of several variables
I have setup in the form properties/variables. These variables take on different values depending on the users choice. For the exclusion group, in the object pallet, I have set the binding to normal, and have checked the "Specify Item Values" check box. Also the values for the choices have been assigned 1,2,3,4,5.
Here is my code for the change event fir the exclusion group (This is exactly what I have tried). For now, the values for the variables to take on in the different cases, are completely arbitrary.
switch (this.change.rawValue)              // I have tried so many things here
    case "1":                                        // I have tried the caption, single quotes in all combinations
        addLivingExp = "1";
        damageOthersProperty = "2";
        liabilityIncl = "3";
        maxCoverage = "4";
        minCoverage = "5";
        persProperty = "6";
        relatedPrivateStruct = "7";
        break;
    case "2":
        addLivingExp = "10";
        damageOthersProperty = "20";
        liabilityIncl = "30";
        maxCoverage = "40";
        minCoverage = "50";
        persProperty = "60"
        relatedPrivateStruct = "70";
        break;
    case "3":
        addLivingExp = "100";
        damageOthersProperty = "200";
        liabilityIncl = "300";
        maxCoverage = "400";
        minCoverage = "500";
        persProperty = "600"
        relatedPrivateStruct = "700";
        break;
    case "4":
        addLivingExp = "1000";
        damageOthersProperty = "2000";
        liabilityIncl = "3000";
        maxCoverage = "4000";
        minCoverage = "5000";
        persProperty = "6000"
        relatedPrivateStruct = "7000";
        break;
    case "5":
        addLivingExp = "10000";
        damageOthersProperty = "20000";
        liabilityIncl = "30000";
        maxCoverage = "40000";
        minCoverage = "50000";
        persProperty = "60000"
        relatedPrivateStruct = "70000";
        break;
    default:
        minCoverage= 5;
        break;
There must be something obvious I am missing? Eternally grateful for advice on this.
Stephen

There are two issues in this script:
1. You are not using the accessor 'value' to set form variables
2. You are not correctly getting the value of the radio button list in the switch clause
Please see the working script below.
Ben Walsh
www.avoka.com
switch (this.rawValue)
    case "1":
        addLivingExp.value                  = "1";
        damageOthersProperty.value   = "2";
        liabilityIncl.value                      = "3";
        maxCoverage.value                 = "4";
        minCoverage.value                  = "5";
        persProperty.value                  = "6";
        relatedPrivateStruct.value        = "7";
        break;
    case "2":
        addLivingExp.value                  = "10";
        damageOthersProperty.value   = "20";
        liabilityIncl.value                     = "30";
        maxCoverage.value                 = "40";
        minCoverage.value                  = "50";
        persProperty.value                  = "60"
        relatedPrivateStruct.value        = "70";
        break;
    case "3":
        addLivingExp.value                 = "100";
        damageOthersProperty.value   = "200";
        liabilityIncl.value                     = "300";
        maxCoverage.value                 = "400";
        minCoverage.value                  = "500";
        persProperty.value                  = "600"
        relatedPrivateStruct.value        = "700";
        break;
    case "4":
        addLivingExp.value                  = "1000";
        damageOthersProperty.value   = "2000";
        liabilityIncl.value                      = "3000";
        maxCoverage.value                 = "4000";
        minCoverage.value                  = "5000";
        persProperty.value                  = "6000"
        relatedPrivateStruct.value        = "7000";
        break;
    case "5":
        addLivingExp.value                  = "10000";
        damageOthersProperty.value   = "20000";
        liabilityIncl.value                      = "30000";
        maxCoverage.value                 = "40000";
        minCoverage.value                  = "50000";
        persProperty.value                  = "60000"
        relatedPrivateStruct.value        = "70000";
        break;
    default:
        minCoverage.value                 = 5;
        break;

Is there a way to change the defaulted (press 'Enter or Return on keyboard) button in a dialog box? Specifically,

When the cookie preference is set to "ask every time" the default button (highlighted & selected when I hit return or enter) is "allow." Can I change the default button to "allow for session" so I don't have to use the mouse to select it?

Your question/suggestion got me thinking about making a programmable function key (PFK), but I couldn't think how to make a PFK represent a mouse click. Then I tried the option [ ⌥ ] key (I don't have Alt [⎇ ] ) and the s, with or without the shift. I tried the command [⌘] key, and finally the control [⌃] key with the s — that's the one that worked. 8¬D
I remembered scripting radio buttons, which might apply here, but it's been too long ago.
Thank you for pointing me in a new direction, that will do well enough 'till I find out if the default button(s) can be changed in dialog boxes in general.

FPM : how to subscribe buttons event for Dialog box

Hi All,
I am calling a FPM configuration as popup, i have used standard button CLOSE. Now I wanted to assigned my own action to it. How can i achieve this ?
As in webdynpro we can use SUBSCRIBE_TO_BUTTON_EVENT, similarly which method i can use in FPM ?
E.g. in below case i wanted to write my own code on click of OK button.
        LS_DB_PROP-BUTTON_SET = 2.
         LS_DB_PROP-TEXT_FOR_CLOSE_BUTTON = 'Ok'.
         CALL METHOD LO_FPM->OPEN_DIALOG_BOX
           EXPORTING
             IV_DIALOG_BOX_ID         = LV_WINDOW_ID
             IS_DIALOG_BOX_PROPERTIES = LS_DB_PROP
             IO_EVENT_DATA            = LO_FPM_EVENT_DATA
*           IV_EVENT_ADAPTS_CONTEXT =
Thanks in Advance,
P$G

Hi Prathamesh,
Refer to this Opening and Closing FPM Dialog Boxes which might help you.
For catching the event :
When cl_fpm_event=>gc_event_close_dialog_box.
       io_event->mo_event_data->get_value(
         EXPORTING
           iv_key   = 'DIALOG_BUTTON_ACTION'
         IMPORTING
           ev_value = lv_string
       IF lv_string EQ 'CLOSE'.
Write logic here
     endif.
Hope it might help you.
Thanks
KH

Pages button in printer dialog box is deactivating while taking print ?

Hello exports,
while taking print abap reports (developed using smartforms) pages buttoon (from- to) in printer dialog box
is by default is deactivating .How to activate this button ? who will do this one (Abaper or basis guy).
pls help me in this.

Hi,
So, as you see a field "from ... to ...", I think you are talking about the "background print parameters" dialog (this is not the smart forms print dialog, which contains field "page selection").
I don't understand. "Pages from ... to ..." is always displayed, and the user can enter them manually. Do you want to enter pages programmatically?
What is your code or the steps to display this dialog? Is it fully standard or do you use GET_PRINT_PARAMETERS programmatically?
Sandra

ITunes 12: Buttons missing in dialog boxes (not visible)

Hello.
Since using iTunes 12 (in my case: German version) buttons like YES/NO or OK/CANCEL are not shown in smaller dialog boxes when iTunes wants to interact with the user and asks question whether to do this or to do that.
The buttons are just not visible, the boxes are too small and they cannot be resized (= fixed size). I think this could be due to longer German texts in the dialog boxes compared to the English language version.
The buttons are there but cannot be seen or clicked.
Screen resolution is 1920x1200 and text zoom factor is 100% in Windows 7. Window size for these dialog boxes seems to be hard-corded and due to line breaks and longer texts in German the YES/NO buttons seem to get an unexpected carriage return moving the buttons out of the visible area.
Please fix this!
Kind regards,
Argentinos

Example: here a part of the buttons is visible but in many dialog boxes they are completely cut off.

Handling button events for dialog boxes of a used component

Hello,
After I call a dialog box/window for the view of the used component, how can I handle the button events of the window that I called?
I create the window using the method CREATE_WINDOW_FOR_CMP_USAGE of the interface IF_WD_WINDOW_MANAGER. This method returns window reference of type IF_WD_WINDOW.
Thanks & Regards,
Reena

It's very easy.
Have a look to the document: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e242bf5-0901-0010-c99c-83c180163c73
You will find the SUBSCRIBE_TO_BUTTON_EVENT on page 6.
Sergio

Dialog Programming: Problem with Radio Buttons in a dialog screen.

Removed - Duplicate posting.
Edited by: miniSAP on May 14, 2009 9:05 AM

Hi,
go to se51 screen layou and select the four radio button and right click there is a option called assigned group name..
enter the group name..
from now onwards it allows you to select only one radio button at a time..
Regards,
Prabhudas

Can we rename default 'ok' button in a dialog box??

In dialog box generated below,I don't want the default ok button displayed,is it possible to remove it??or is there any way to rename it and change its position by using a layout manager??
import javax.swing.*;
public class DialogBoxDemo
public static void main(String args[])
    JPanel panel=new JPanel();
    JPanel leftBox=new JPanel();   // left panel with a box layout
    leftBox.setLayout(new BoxLayout(leftBox,BoxLayout.Y_AXIS));
    JTextField textfield = new JTextField(10);
    leftBox.add(textfield);
    JTextField textfield1 = new JTextField(10);
    leftBox.add(textfield1);
    JCheckBox cb = new JCheckBox();
    leftBox.add(cb);
    JPanel rightBox=new JPanel(); // right panel with a box layout
    rightBox.setLayout(new BoxLayout(rightBox,BoxLayout.Y_AXIS));
    JButton but1=new JButton("Find Next");
    JButton but2=new JButton("Cancel");
    rightBox.add(but1);
    rightBox.add(but2);
    panel.add(leftBox);
    panel.add(rightBox);
    JOptionPane.showMessageDialog(null,panel,"Replace",JOptionPane.INFORMATION_MESSAGE);
}It is possible to use default ok button instead of creating a cancel button,but I don't want a button there.I want a button in the rightBox panel which is set in a Box Layout...
Thanks in advance...

To rename buttons, try:
    UIManager.put("OptionPane.cancelButtonText", "Your text");
    UIManager.put("OptionPane.noButtonText", "Your text");
    UIManager.put("OptionPane.okButtonText", "Your text");
    UIManager.put("OptionPane.yesButtonText", "Your text");You can rename ok button to...for instance "cancel", but in fact, this will not change its value...Your new cancel button will be JOptionPane.OK_OPTION
sorry it's quite late to reply for this, but other googling people might find this topic with exact problem or a little similar.

Grouping radio buttons in JEditorPane

I can't seem to make grouping of radio buttons work for an html page that's loaded into a JEditorPane. The content type is set properly to text/html. Is there a little trick that I'm missing??
Once I select a button that's not part of a previous group, it unselects that previous group anyway!!

Hello There,
I too am stuck up with the same problem. My HTML document contains two radio buttons which belong to the same group. But when displayed on a Jeditorpane the radio buttons does'nt behave as a part of a group. Both the radio buttons get selected. If you have come across a solution..please help me..
Thanx
Mohamed Zafer

Grouping Radio Buttons on a Dialog Box

Similar Messages

Maybe you are looking for