Groups vanish from OID when a new middle tier is installed for Portal - URGENT

gurus,
we had the following portal environment -
1. database tier (sun box #1) - oracle 9i database
2. middle tier (sun box #2) - oracles 9iAS portal Release 2 with webcache option
now, we installed 9iAS on a third box (sun box#3) so we can have multiple apache servers.
after the install was done i logged into the portal to do a health check but, found that all the groups were missing.
i had following groups before bringing in sun box#3 -
GRP_ADMIN
GRP_BASE_USER and many others.
after the installation of third server i lost all the groups. it looks like the groups vanished away from the OID. i found the following -
Owner.Table Groups exist ?
(Y / N)
PORTAL.WWSEC_GROUP$ Y
ORASSO.WWSEC_GROUP$ N
could anyone reply on this pls ... its very critical cause all the user privileges has been lost due to this.
thanx a bunch.

Hi,
Just to close off this thread, I got this portal installation working. I think what made it work was adding an additional 512MB of memory to the machine in addition to the original 640MB.
Jim

Similar Messages

  • I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

    I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Dose middle tier installation asks for the instance name?

    Dose middle tier installation asks for the instance name?
    If yes, should it be same as the infrastructure instance name?
    Regards,
    DN

    Dose middle tier installation asks for the instance name?It should, and the name is not the same as infrastructure. Infrastructure and Midtier are different installations and different Oracle homes, in fact they could be installed on different machines.
    In Application Server terminology, an "Instance" is related to an "Installation", the difference is that an installation is the set of files installed into an Oracle home and an instance is the set of processes associated with those files.

  • How can we retrieve the Group name from oid?

    Hi:
    In following request object, we can get all the user related information from oid except group name where a particular user belongs to.
    For instance user id, first name, last name and email etc but we could not get the group name.
    PortletRenderRequest pReq = (PortletRenderRequest)
    request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
    pReq.getUser()……
    Please advice, how I we get the hold of group name from orcldefaultprofilegroup (oid)?
    I would really appreciate your reply.
    Thank you.
    - Ali Raza.

    I am not sure about the PDK API to get the group name. But using LDAP API its easy to get the User Group.
    If you find the answer to get the group name using PDK API, Please update in forum. It will really help others.
    --Balaji S                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Podcasts deleted from iPhone4 when download new podcasts on the phone

    download podcasts both on computer and iPhone, occasionallt the existing podacasts are deleted when a new podcast is downloaded.
    Is there a setting somewhere that I've missed? There's never any issue on sync between device and computer.
    Would having 2 Apple id's accounts having anything to do with it? ... Different countries.
    Thanks.

    In iTunes go to Podcasts > Settings > Episodes to keep... Did this get changed to Most recent episode?

  • Connection timed out when accessing BPEL middle tier

    I'm having fits over communicating with a Solaris middle tier PM from the PC JDev during construction, build, and deploy time and just can't make this out. I get a 'connect timed out' message immediately when a reference to the Solaris middle tier PM is made from JDev. Here are some particulars:
    1. Connection from JDev and Middle Tier PM test successfully.
    2. If I make no reference to the JDev middle tier process and I build and deploy a simple process successfully. It will also test okay.
    3. If I try to use the simple process deployed on the Middle Tier PM as a partner link, when I attempt to browse the process when adding the partner link I get the 'Connect timed out' message immediately.
    4. If I try to use a schema deployed to the xmllib I get the 'Connect Timed out' message when I attempt to build the process using the schema. (I can pull the same schema up in a browser on the Middle Tier PM).
    Why does JDev complain that the connection timed out?
    I am using 10.1.2 GA on both JDev and Middle Tier PM (deployed on top of Oracle AS).

    I discovered a pilot error. Nevermind. I transposed some IP characters in my jdev.conf file for the non-proxy hosts.

  • Keep photos old photos from deleting when sincing new ones

    My ipod has pictureson it but when I want to add new file delete pictures already there and I wanted to keep those.   Then when I download the old file new one is gone.    Help

    You can only sync one folder of photos to the iPod. If you then select another folder, the photos in the first folder are then deleted from the iPod.
    What you can do is add subfolders to the one syncing folder. You can have one level of subfolders in the one syncing folder.  Just add the new photos as a subfolder in the one syncing folder.

  • Need to stop group chat from jumping down to new p...

    I have people that need to be able to scroll up and read back in Chat ..  but they lose their place every time when it jumps back down with a new post.
    Anything we can do? This is in a group chat BTW ...

    Great!  
    Let';s see if anyone else has any ideas for the others too ...

  • User/group overview from OID

    Hello,
    I am wondering if there is some/method available to produce a tree overview of all groups and users which are administered in OID. I have an Oracle Portal environment and I need to be able to specifiy a list of all users and groups they are in.
    Ofcourse I can just do a ldapsearch, but I wonder if anybody knows if there are tools to do this. Preferreable I'd like to export to XML.
    Thanks in advance,
    Albert

    Try this configuration guide for group assignment RADIUS server:
    http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008063b318.html#wp1543772

  • Messages vanish from Inbox when I click on them

    This has happened a few times. I can't figure out why.
    This seems to apply to messages that are only a few seconds old. Either it disappears a moment after I've clicked on it, or it simply vanishes moments after appearing in my Inbox. It's not in Junk or any other mailbox. I've disabled filters.
    It only happens once or twice a month, but it's still a problem since I have to ask the sender to re-send the email, and I'm not sure which emails have disappeared without my noticing.
    Advice?

    Andrew,
    Welcome to the Discussions.
    What type of account(s) are you using -- POP, IMAP or .mac?
    Did you set up your accounts from scratch, on your MBP, or by transfer of the Mail folder from another Mac?
    More info, please.
    Ernie

  • Restricting access using groups pulled from OID Authenticator

    Using the OID Authenticator provider, can access to WLS be limited to those ldap registered users who belong to a specific group (as specified in ldap) ?
    I have setup an oid authenticator provider which works in terms of WLS authentication. By looking in AdminServer.log I can see that a users group is picked up however, I'd like to use the group name to restrict access. Is this possible if specif param's in the oid authenticator are used ?

    Remove or replace the ACI that says "Anonymous access" with something more in line with the level of access desired

  • Do I need to upgrade Arch from CD when a new version is released?

    The subject is pretty much self-explanatory.
    I installed Duke. Should I upgrade to Don't Panic? Or I will get the same effect if I just upgrade the packages regularly?

    Cerebral wrote:The names ("Duke", "Don't Panic", etc..) are just the names of the installer.  In theory, you could install with the Arch 0.1 CD, and update to the same system as everyone else (although it would be hard with changes like udev, kernels, initcpio, and other stuff - it'd be actually kind of interesting to see if someone could do it without banging their head against the desk too many times.  )
    Can you still get 0.1? If so that sounds like a good weekend project. Errr.... maybe a few weekends..:D
    Last edited by ToastedToad (2007-08-15 01:51:10)

  • When a new hard drive was installed in my imac, photobooth asked me to choose my existing photo booth library or create a new one. My existing one is there, but I can't select it.

    My hard drive recently had to be replaced, and I just got my computer back with successful data recovery. When I opened Photo Booth, I was prompted with the following: 'Photo Booth could not locate your photo library. Please choose an existing library, or create a new one in order to continue using Photo Booth. This photo library will be used the next time you open Photo Booth.'
    I navigated to my regular photo booth library in my hard drive, but it wouldn't allow me to select it. I then tried opening and updating iPhoto including upgrading my library. I imported my old Photo Booth Library as well. Everything works! I should be allowed to use the same folder as before, instead of creating a "Photo Booth Library #2" or something. Any Ideas?

    Repair permissions ...
    Launch Disk Utility located in your Applications / Utilities folder
    Select the startup disk on the left then select the First Aid tab.
    Click:  Repair Disk Permissions
    This can take a few minutes so don't be alarmed. 
    Restart your Mac when it's finished then try PhotoBooth.

  • Upgraded to 4 and lost the use of back/forward butons when in new tab. Re-installed 3.6 but problem still persists. Any answers ????

    I upgraded to 4 and lost the use of the back/forward buttons when in a new tab (ok on homepage) Re-installed 3.6 but problem still persists. Any remedy ????

    *New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

  • Upgrade when using single middle tier, multiple instances

    I'm wondering a little bit about a special case for upgrades. I know that I can install HTML DB once (in a new Oracle Home) and then either
    1) install it in other DB's via the installer and drop the new Oracle_home's (creating another DAD in the first home) or
    2) apparently I can just run 10gins.sql and create another DAD (right?)
    So, now I have many databases with HTMLDB installed, but just one HTMLDB mid-tier home. When I get ready to upgrade (or even patch) all of these instances, what will the process entail? Will the installer be able to handle this? Will I just run a script manually? Will it be supported?
    Thanks for the info.
    Anton

    Anton:
    1.6 (due out in December) will be distributed via a ZIP file, and will be installed by running an install script via SQL*Plus. The script will detect previous versions, and proceed with an upgrade.
    For 10gR2, the files will be installed by the companion CD or a separate HTML DB CD in the target database's Oracle home. Oracle HTML DB will then be installed and configured by the DBCA. This will process will also detect previous versions, and proceed with an upgrade if necessary.
    So for 1.6, you can upgrade all your instances using the installer script contained in the ZIP file.
    For 10gR2, you will install the software (files) in each Oracle database home, and then run the DBCA to install (upgrade) and configure.
    Hope that helps,
    Jason

Maybe you are looking for