GTX260-OC High Temps all of a sudden

My N260GTX-T2D896-OCv2 temperature is going up to 99C. I always had the fan speed set to 60% and before the temp wouldn't go past 65C. I cleaned whatever dust there was and tried again with same result. Now my fan speed is at 75% and the temp is holding at 74C. What's happening? Should I reinstall the nvidia drivers, maybe something is causing the reading to be inaccurate?
I checked the temp with msi afterburner(using this to increase fan speed), gpu-z, hwmonitor.
Thanks

http://www.newegg.com/Product/Product.aspx?Item=N82E16814127409 I bought the card 2/22/09
This is what I'm doing.. I launch world of warcraft and sit on the login screen and watch my temps go up. It's never been above 65C(on 60% fan speed) , ever , until now. I have to keep the fan speed above 75% or the card will get to 99C like it did earlier today when I decided to check. PCB temp is high too, 59C. I reinstall nvidia drivers and still same thing, high temps and I'm only using 84% of the GPU too.. if it was any higher who knows how hot it will get.

Similar Messages

Battery wont charge at high loads all of a sudden?!

ANy help here would be appriciates, asap! thanks:P
All of a sudden, as of today, my battery wont charge when the mbp is under a high load. I thought it was just not charging (was not charging in wow) and then realised as soon as i quit, it started to charge again. SO i ran 2 yes > /dev/null to test, and all of a sudden it stopped charging and the magsafe light went to green... (at 25%) as soon as i stopped one of hte processes, abck to orange, charging... started a 2nd up, stopped charging and started to use the battery again.
Does ANYONE have any idea what is going on? i know macbooks can't cahrge under high loads, however, im on a MBP and it has never happened until this evening. Any ideas guys? could it be the bettery somehow, actual computer short not letting it get enough power.... anything? 3 month old mbp (3rd one, first two never had a problem, nor this until tonight)
callign apple in morning, but hoping to resolve before since the closest store is hrs away.. thanks!
james

Hey,
I've actually used yes to test it ( yes > /dev/null) in console to mac the cores, its standard on all systems. They've sent em a new power supply saying it sounds like 'it isnt getting all the current' basically, which, seems rather odd. it ONLY started after the keyboard update, as if the new firmware ***** more power ot eh usb hub and it just pushed it over.. maybe my magsafe was always busted nto working properly, but it's always worked for me.. I have a feeling i'm gonna be going into the store an hr away this weekend :/
Had a friend who has NOT ran the update try, and at full loads he still charge fine, unplugged with it running to drain battery a bit, plugged in and it went ot charge, i tried again and it goes green and wont charge at a heavy load Oh, yea, and my laptop wont go on w/o battery and plugged in.. like it's not getting the full 85w, or.. somethign is toasted on my actual laptop. CCC here i come for a drive clone tonight! heh

My Bill Payment became so high all of a sudden after renewing!

Around November 3 I reneweg my account for another 2 years getting some upgrade and discounts in the process. Before I renewed was paying about $165 per month for my three fios services. Around late November my upgrades and discounts would take affect. My first bill for theses new services was good. I only had to pay around $145 like the agent i spoke to prmised. However, for the new bill I just recieved today the price hiked back up to the $165 range. I compared the two bills closely and it seems the only difference was that this bill had about a $3 increase in taxes. Why did my bil payment become so high all of a sudden? Am I not getting the promotional discounts? I was told by a verizon agent that I would only be paying around $145 a month which is the reason why I upgraded in the first place. Please help!
P.S. I still have not recieved my $120 bonus prepaid card yet for renewing.

Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Very high temp, but no problems at all!!!

Ok I got this k7n2-l last month. When I installed it with my 1800 xp, the temps would hover about 60 to 75 c. So I went and bought a new cpu cooler( therm vol 7) adn applied some artic silver 2. no change in temps. this cpu ran like 30 to 40c in my old k7s5a board with retail cpu fan. So I went and bought a xp 2200. and had them install it pro installed with retail cpu fan and thermal pad. now my temp hover between 70 and 100 c. the funny thing is I have never had a crash or any system problems what so ever. And I play counter-strike everyday. I ordered a ther volc 9 with some artic silver 3. But doesnt this seem weird. that I get these high temps and my system is very stable. I even oc'd the 2200 to a 2400 and get the same temp readings. I think the temp is wrong. Oh and I'm reading it from the bios and pc alert 4. what do you guys think?

With a Duron 800 and a Thermalright SK-5 and a 60 MM fan blowing about 12 CFM i was sitting around 120 F. I installed a Valcano 9 and the temp whent up to 131 F. I thougth i installed it wrong so i took it off, cleaned it and re aplied some Arctic Alumnia and the temp was stilla round 130 F. I took it off, put the SK-5 back on and it dropped to around 124 F. I took the 80 MM fan off the Valcano 9 and placed it on the SK-5. The temp whent down to around 118 F. Needless to say the Valcano 9 heatsink is a peice of . Or my first generation old ass SK-5 is badder asser. But i dought that seeing the I was getting the same temps with a $8 CoolerMaster.
Now with my Athlon 1700+ @ 195x10 I hover around 127 - 131 F with the Thermaltake fan from the Valcano 9 at its lowest setting, compleatly silent, spinning about 2500 RPM's.
I attached the sensor from the Valcano 9 to the bottem of the Proc whith some thermal tape. With a little re-wiring i ran it into my Vantec NXP 201. What ever it reports is usally around 3 - 5 C lower then the Bios. Usually around 48 C. I thought the Bios temps where way off. But now lookign at it i'm not so sure they are. If the temp in the Bios is being taken fromthe core of the Proc and the temp on the Vantec Nesus is being taken from the bottom of the proc, and theres only a free degrees difrence, i'm not sure the Bios is wrong.
This is on an ILSR BTW..

MSI GT683 DXR CPU high temps

Hello,
I have this wounderful gaming laptop for 2 months but I have some problem with CPU. Few days ago I was plaing BFH and suddenly my computer started to low GPU usage and shuted off like u will hold shut down button. When I started again I hadn't screen about wrong shuting down(safe mode etc.). Now when I play BFH my CPU temp, like ThrottleStop, OCCT, CPUID Hardware Monitor shows, comes up to 97 degree, 80-85 awerage. When it comes to 90 Cooler starts to work on his highs to lower temp to 80-85 than again works normally. When I start on Cooler Boost technology CPU temp is about 70. My question: are these temp good or to high. I think this is gaming laptop and it shouldn't have any problems with BFH. Should I turn on all the time Cooler Boost ?
Of course when it comes to high temp I notice performance decrease. Normally I have 100 FPS but it lowers to 70 or even to 35.
Sorry for my English
Cheers Barbatian

No overclock! Don't be too surprised by the fact that 1333 is less than 1600. So what you should do is set the memory speed down. Down to something your AMD processor likes. Strictly speaking, running at 1600 should only be done after a heavy processor overclock.
Talk to "viper" about it: https://forum-en.msi.com/index.php?topic=152798.0
So, please set memory to run at 1333 to gain stability and fix your temp. issue.

All of a sudden no sound - please help

Hi,
I'm running Vista Ultimate 64-bit version with a X-Fi Titanium Fatalty Pro card and all of a sudden I noticed I don't have any sound coming from my speakers anymore and when I in iTune for example press the play button to play a song the play button changes to a pause button indicating the play button has been pressed but I don't get any sound and the time counter showing where in the song I am is not moving but just stays at 0 seconds into the song. When I press the pause button it returns to a play button again. I haven't changed anything in my system when it comes to drivers etc before this happened, it happened all by itself sort of speak. The only thing I could think of that might have caused this is if some automatic Microsoft updates for Vista 64-bit got installed affecting the Creative drivers for my sound card.
If I go into Vista's?sound settings I see my X-Fi Titanium Fatalty Pro card in there and it is reported to be?working but if I click configure and then press the Test button which normally cycles a tone between my speakers (I have a 5. speaker system) same thing happens as in iTunes ie the play button goes into a stop button indicating?it has been pressed but no sound?is coming from any speaker and then when I press the Stop button it returns to a Test button again. I have also checked in Device Manager for any problems but no exclamation marks or anything else strange in there - everything looks normal.
I have tried re-installing the drivers?but still same problem, I have also tried removing all the Creative drivers all together running in Safe Mode in Vista and then reinstall them once again but still no go. The only way for me to get sound from my X-Fi Titanium Fatalty Pro card right now is by unstalling the Creative drivers and instead use Windows Vista's built-in drivers identifying the sound card as a 'High definition audio device' and this way the sound is working just fine with sound coming from all speakers. Of course I could stay with using Vista's default driver since this is working but it would still be nice to be able to use the real Creative drivers for my card and I by not using them I guess I'm also missing lots of other functionality I get with using the real Creative software and drivers.
Anyone else seen this or has a clue what might be wrong?here?
Thanks in advance for your input guys!

Sounds similar but still not the same issue I guess because I have the problem regardless what application I'm using, I don't even get the internal Windows sounds when I have the Creative drivers installed.
Feels strange not more people have the same problem if it's caused by a Microsoft update so maybe that's not the case after all...can't understand though what might have caused it if not that?since I haven't done anything to my computer's config lately and this problem with the sound happened from one day to the other...hmm...

IMac running extremely slow all of a sudden

I have a 1st generation Intel iMac (24", late 2006), which ran fine for three years but all of a sudden slowed to a crawl about a month ago. I upgraded to 3GB of RAM, but didn't see any improvement; I've run the disk utility app on the system install disk and didn't get any problems; I don't see anything in the Activity Monitor that's hogging CPU usage (although iTunes uses about 7% while playing music and 20% while playing video - considerably higher when it loads a new track into RAM); and I have 70GB free on a 300GB hard disk. I realize that this is just scratching the surface, so what else should I be looking at? For what it's worth, yes I have an HP printer, but the drivers don't seem to take up that much CPU time; and I'm still on 10.4.11, so maybe it's just time to upgrade to Snow Leopard; but either way I've been on this system (and with this printer) for a long time, and I don't understand why this would happen all of a sudden...
Thanks!
Message was edited by: Astigmatism

HI,
70GB free disk space could be at least part of the problem for the disk slowing down.
Try Freeing space on your Mac OS X startup disk
Check the startup disk for errors that may need repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
How to Force Background Maintenance
One way to free up disk space...
Open Console. Select system.log then from the Menu Bar click Reveal in Finder then move that log file to the Trash. These logs can take up as much as a GB.
Carolyn

Time Machine backup painfully slow all of a sudden

For some reason my time machine backups have become painfully slow for some reason. They were fine earlier today, then IIRC I booted windows, then booted back into OSX to run a backup. Despite there being only 1 or two changes (files added to the system) time machine began "preparing backup" by going through all the files on my HDD! Now, it is backing up, but at the rate of about 5 Kb/s!
Something is wrong. I've tried deleting the progress file in the backup folder and "resetting" TM by deselecting the backup drive and selecting it again. Nothing worked. Why would TM be so slow all of a sudden?
Has anyone any ideas?

iBookguy wrote:
No pre-backup thinning needed: 18.98 GB requested (including padding), 205.25 GB available
Copied 105384 files (7.2 MB) from volume Mac OSX.
That is a bit suspicious, but not necessarily wrong. Something caused it to think about 16 GB had been changed (it adds 20% for the "padding" in the message).
How are you running Windoze? Is it on a separate partition? If you're running it via virtualization software, with the vm file on an OSX disk but excluded from TM, that's a possible explanation.
105384 files in only 7.2mb? I doubt it...something seems fishy
Those counts are nearly always very high, and sometimes crazy high. There's some indication it's counting all the metadata, extended attributes, etc., as separate files.
If in doubt, boot up from your Install disc and do a +*Repair Disk+* on your boot volume. Then reboot normally and run another backup. That should trigger a "deep traversal," where TM will compare everything on your system with it's backups, to be sure it's got everything it should.

What's wrong with IN-APP PURCHASE??? all of a sudden i couldn't do any IAP purchase anymore????

what's wrong with IN-APP PURCHASE??? all of a sudden i couldn't do any IAP purchase anymore????

Please note that your post is already buried in the old pages of the forum.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

In fCP x jpgs are blurry all of a sudden

no matter what size jpg or tiff
when i move the sequence the photo turns blurry
when i stop the movie the photo is sharp
e.g a jpg 1043 x 694 276 k
if i keep the image still it is sharp
when i stop it in a sequnce of jpgs it is sharp
if i move it it is blurry
what is going on here
did i press a wrong button
all of a sudden out of the blue this is a catastrophic event in my work production

In your FCPX preferences, select Playback. In the Playback section, change Playback Quality to High Quality rather than Better Performance. Note that you may see errors regarding dropped frames on playback depending on what you're doing.
When you export or share your project, the images should export at full quality for the settings you're using. The blur you're seeing is expected during playback at Better Performance settings.

During app load, Premiere elements 11 stopped working all of a sudden. Why?

Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

DFMA
Thanks for the follow up with the very helpful information.
If this is one of those Importer QuickTime type issues, the answers are few if any.
If you have not already tried
Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
the whole 11.0 Folder in which it exists.
then, please try the following...
My expectations for the following are not high, but worth the time -
1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
2. free ccleaner run through (regular and registry parts)
CCleaner - Download
3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
Others on the list...
1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
from there.
2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
download, or get tryout installation files for 11 into which you can insert your purchased serial number.
Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
Denied message.
We will be watching for your progress.
Thanks.
ATR

Qosmio X870 shut down all of a sudden

My Qosmio X870 shut itself down all of a sudden and wouldnt turn on or charge for about an hour, what does this mean?

I think it was a high temperature issue.
Mostly the notebooks shut down automatically to prevent the hardware from damage.
If the cooling grilles are full of dust or debris, its advisable to remove this using compressed air spray.

All of a sudden roaming charges...

Hi there. All of a sudden my bill is showing roaming charges. I used to have unlimited local and long distance but now my plan shows local unlimited only. (I was grandfathered in before Verizon since I was with Surewest) I never changed this and now for the past couple months I was wondering why my bill was so high....freakin hundred+ dollars of just roaming! Someone must have changed it bbut if definately needs to be changed back and be reimbursed! Anyone else have this happen??

I am not sure VZW even offers a local only plan. Let us know what ya find out. Have you looked at your detailed bill online?

I have an iphone and i was sending a multimedia message and all of a sudden the phone turned off and will not turn on.We have been charging it for almost half an hour or more and it still hasnt turned on. How do we fix it?

I have an iphone and i was sending a multimedia message and all of a sudden the phone turned off and will not turn back on. We have been charging it for almost half an hour or more and it still hasn't turned on. How do we fix it?

Wine, were you charging over the USB Connection or AC Power? We've found in our organization that at times not enough power is generated over USB to recharge it in situations like this...I quote from the email of a fellow technician that i just received today...
I’ve had a couple of users up here bring their iPhones to me so dead that the phone was unresponsive, no matter what we did. One thing that many people do not realize is that the iPhone (iOS devices in general) have power management in them. The power management appears to be set up so that the device will not power on at all until the battery is at a certain minimum level. If the user will plug the device into the power adapter, not a USB port on a computer (laptops especially), and leave it for about an hour, maybe longer, the device will come back to life.
The reason I say they have to use the power adapter is because the USB port is not high enough power to bring the charge up fast enough for the battery to come back out of “hibernation”.
Each time I have had the users do the power adapter plug in, and leave it for a couple of hours, the devices have come back to life
Hope this helps

EMac VERY s-l-o-w...all of a sudden

What did I do wrong? I have nothing and my kids say they didn't, download anything lately other than a couple photos. And yet, all of a sudden, my eMac, [with 10.3.9 system, with 1 GHz Power PC G4, and 640 MB SD Ram and L2 cache: 256 kb and bus speed of 133 MHz and Boot Rom: 4.6.4f1] is operating very slowly. I mean it takes 5 minutes to open any application. It takes 3 minutes to bounce the dock if that ever works. To change system prefs takes many minutes.
Help...this has been getting worse for 4 weeks now. Thanks everyone.
bob mendelsohn
eMac GHz1, Power PC G4 Mac OS X (10.3.9) eMac OS X (10.3.9) 1 GHz PowerPC G4

Per Gadfly and roam's queries about the hard rive and available space, you need at least 1 GB free space for the swap files used by any Unix-based OS (as is OS X), increasing that to 5+ GB if you burn CD/DVD discs and need space for thr burner software's temp files, increaasing beyond that if you use programs (e.g. Photoshop) that make heavy use of their own disc caches. If you're anywhere near those ballpark minimums, try removing any and all unneeded user data files, old .dmg installers, unwatched movies, etc. and empty the Trash to free up disc space. Also refer to Francine: A Miscellany of Mystifying Tiger Problems.
If you normally shut down an OS X Mac overnight or leave it in system sleep, the cron maintenance tasks cannot run in their nominal 3 am timeframe. (Display-only sleep allows the maintenance tasks to run). You can leave the Mac in display-only sleep a weekend or two a month; you can manually Force Background Maintenance; or you can use a third-party utility such as OnyX to run the maintenance. Note that any system utility you use must be compatible with the OS version (e.g., use the Tiger version of OnyX with 10.4.x).
The MacAttorney website roam linked has some very useful tips, as does Gulliver - OS X System maintenance.

GTX260-OC High Temps all of a sudden

Similar Messages

Maybe you are looking for