GUI_DOWNLOAD - error codepage could not foune.

Hi All,
I m downloading data from SAP tables to txt file.
When I m running this program in SE38 then it works fine. But when I m scheduling it in background it is giving error - CODEPAGE COUND NOT FOUND.
I kept exception codepage = ' '.
Reply. Thanx.
-- umesh

Hai Umesh
Check the following Documentation
Character Representation for Output
Description
Use parameter CODEPAGE to specify the desired target codepage. If this parameter is not set, the codepage of the SAP GUI is used as the target codepage.
Value range
4-digit number of the SAP codepage. The function module SCP_CODEPAGE_BY_EXTERNAL_NAME returns the SAP codepage number for an external character set name, for example, "iso-8859-1". The function module NLS_GET_FRONTEND_CP returns the appropriate non-Unicode frontend codepage for a language.
You can determine the desired codepage interactively, if the parameter with_encoding of method file_save_dialog is set by cl_gui_frontend_services.
SPACE: Codepage of the SAP GUI
Default
SPACE
Thanks & regards
Sreenivasulu P

Similar Messages

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

BDC Error - Codepage could not be determined

Hello Gurus,
We are having a problem with BDC in transaction VF01.
The return message is FES-025 "Codepage could not be determined".
First of all the details and what have been done so far:
- The funcion module with BDC is called by an EDI message that is send on the creation of the SD Invoice.
- In Online mode, no errors are raised;
- The errors are only raised when the program runs in background - Manual processing of EDI message via T-Code WE19 (online mode) runs with no problems;
- In DEV enviroment, everything runs smoothly (both online and background modes) and we achieve the required result;
- In QAS enviroment, with exacly the same versions of code, the background process fails;
- Both DEV and QAS work on the same physical machine, on different instances.
I've searched quite a lot about this error and most results talk about the usage/call of GUI_UPLOAD or GUI_DOWNLOAD. We are NOT using this type of funcions in our code (or something that would connect to the client).
Any ideias?
Thanks in advance, best regards,
João Argêncio

Some additional informations:
- The sistem is non-unicode;
- The EDI message source and destination are the same machine (inter-company process);
- The user assiciated in IDoc Config has SAP_ALL privileges;
- Both systems are in the same release levels (ECC 5);
- All IDoc configuration is equal in both DEV and QAS instances.
If you need any additional information just let me know.
Thanks oin advance, best regards,
João Argêncio

Getting error "Codepage could not be determined" in background job

<i>Hello Friends,
I am running a background job with a variant and the job get cancelled with the following error message.
Codepage could not be determined
Message no. FES025
Please give your valuable comments.
Thanks,
Senthil</i>

Hi,
Check the oss note 765763(Setting the upload/download codepage for a SAPGUI connection) released for this purpose, as per the documentation of this note, you need to modify the standard program LSFESF03 in order to get rid of this error,
Also check the note 882961(File download: codepage conversion error FES024)
Hope this helps,
Rgds,

BGD Job : Codepage could not be determined

Hi all,
    I run a report (YMMI0038) in background and hitting the following error :
    Codepage could not be determined FES 025 E
    Job cancelled after system exception ERROR_MESSAGE 00 564 A
    This has no problem when running in foreground.
    Do you have any idea for this ?
Best Regards,
Ken

Hello Ken,
Please check -
Note 765763 Setting the upload/download codepage for a SAPGUI connection
Note 882961 File download: codepage conversion error FES024
Thanks

Error: FES025. Codepage could not be determined

Hi,
I have a number of programs that run using an include containing the function GUI_DOWNLOAD to create files lacally or on the server. The programs work perfectly in foreground but their purpose is to run as jobs every night and create the files on the server, which returns the job as CANCELLED and the log reads;
11.12.2008 09:00:17 No se ha podido determinar code page (Codepage could not be determined)
11.12.2008 09:00:17 El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
When I execute the program in foreground using a message log I recieve a message on the status bar indicating;
Transfered 913 bytes, code page 1160.
I'm not quite sure what the code page does. I read another forum which explained that it has something to do with the character set.
Is there any way can assign the code page myself in the program?
Regards,
Simon

OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
                            WITH SMART LINEFEED.
ENDIF.
*If the Presentation Server is selected on the selection screen
IF p_local EQ gc_x.
    LOOP AT gt_text_file INTO wa_text_file.
      CLEAR wa_text_table.
      SPLIT wa_text_file-line AT gc_comma INTO   wa_text_table-objectid
                                                  wa_text_table-lifnr
                                                  wa_text_table-matnr
                                                  wa_text_table-ebelp
                                                  wa_text_table-tdname
                                                  wa_text_table-spras
                                                  wa_text_table-textid
                                                  wa_text_table-object
                                                  wa_text_table-line.
      APPEND wa_text_table TO gt_text_table.
    CLOSE DATASET gv_file.

Codepage could not be determined

Hi all,
I am facing a little strange problem in my system, When i run HR Program my background scheduled jobs are getting cancelled due to an error called "Codepage could not be determined".
Can any one just tell me their experience if the have encountered similar problem in the past.
It's little urgent as we have stuck with all our background schedules jobs.
Thanks...

Hi,
Please use
OPEN DATASET L_FILENAME FOR OUTPUT IGNORING CONVERSION ERRORS. " Ignoring conversion errors should be added
Best regards,
Prashant

Error: "Document could not be saved"

Hi all!
I regularly receive an error, "Document could not be saved", in OS X after a while of usage. It can come after 10 minutes of usage, or after 10 hours of usage. It affects ALL open applications and documents, and doesn't solve with anything but a restart of the entire system. I haven't found any relation to working with any specific application – it seems to happen at random while using any application. And as I said, it affects the entire system and all applications once it happens.
I've also tried this solution (posted elsewhere), but with no luck:
Restart Lion, and Before you hear the chime, hold down Cmd + R, to access Lion Recovery.
Click the Utilities item in the Menu Bar, then click Terminal.
In the Terminal window, type resetpassword and hit Return.
The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
Does anyone know of any other solution to this problem? Or does anyone know the reason for it?
I should also mention that I experienced another problem recently, whereby my computer begun to sometimes (but not always!) show a progression bar at startup. This bar could take between 5-15 minutes to finish. This kept happening for maybe two weeks' time, until finally one day the computer wouldn't startup at all. It would come to show the dark grey Apple logo on the light grey background, and then suddenly shut off before reaching any further. I did a complete wipe out of the hard drive and re-install of the system, and since then haven't experienced the "progression bar"-problem anymore. I read somewhere that this problem could be a sign of harddrive failure or damage, but I still wonder if that is correct. Could the above mentioned "Document could not be saved"-problem also be related to a hard drive damage?
Thanks in advance for your assistance
Regards
Alex

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HELP ME!!!! itunes wont open, error says could not open key......

I attempted to update itunes to the newest upgrade, and the upgrade was unsucceful, and now this error comes up everytime i try to open itunes (it wont open at all). the error says
Could not open key:
HKEYLOCALMACHINE\Software\Classes\.wav\OpenWithList\iTunes.exe.
Verify that you have sufficent access to that key, or contact your support personnel.
This makes no sense since this is on my home PC

hmmm. okay, if you're currently just getting the "itunes has encountered an error ..." let's try the following technique.
preliminaries
download and save a fresh copy of the itunes 6.0.1.3 installer to your hard drive. (eventually we're going to run the install from there rather than online.)
iTunes 6.0.1.3 Installer
switch off any antivirus and antispyware applications prior to any uninstalls, installs or repair installs.
uninstall
use the complete uninstall instructions given in the following document to remove your existing itunes and quicktime:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
... and if you run into problems on the uninstall, try using the Installer Cleanup utility:
Description of the Windows Installer CleanUp Utility
reboot after uninstalling.
reinstall
remember to switch off your antivirus and antispyware.
reinstall itunes using the 6.0.1.3 installer you downloaded previously.
if you get the "itunes has encountered a problem ..." error message again after that install, first check to see if your Quicktime will launch. if you get an error message when you try to launch quicktime, try using the following technique:
iTunes 6 for Windows unexpectedly quits when opened
keep us posted on your progress.
love, b

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When I try to save a photo, I get error message Could not complete your request because of a program error. What's wrong?

I edit a photo and when I click Save As, I get error message "Could not complete your request because of a program error." I exit Elements, try again, same error.
In past I had this problem but it resolved when rebooted PC. This time, PC reboot does not help.
I cannot save anything i do in elements!!
What's wrong? Any suggestions how to fix this? Anyone know what the program error is

Please mention your PSE version and underlying OS.
Also, it would be of great help in resolving the issue if you can upload a snapshot of error message.
Regards
Kishan

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6. Will not open...Error message: could not complete your request because it is not a valid photoshop document.

The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
The platforms don't matter, but you still need file transfer that doesn't corrupt files...

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help

GUI_DOWNLOAD - error codepage could not foune.

Similar Messages

Maybe you are looking for