GX70 Destroyer Low FPS Out of Box

Hi Guys,
Had a minor issue with my FPS on the GX70 Destroyer, found the fix was an issue with the AMD Driver. Re-installed it and it worked fine!
Thanks,
Crafty

Quote from: Crafty;104239
Hi Guys,
Had a minor issue with my FPS on the GX70 Destroyer, found the fix was an issue with the AMD Driver. Re-installed it and it worked fine!
Thanks,
Crafty
Mind to share which game you had low FPS and which AMD driver(driver version) have you re-installed to fix the problem?

Similar Messages

  • GX70 Destroyer V bios update questions

    Hello all,
    Just wanting to get some info from msi or anyone in the know about a issues that has cropped up in MSI latest Video bios update for the GX70 Destroyer , before the Bios update the M290X Video ram is clocked at 1200MHz for bandwidth of 153.6Gb/s after the bios update which was done correctly by following MSI direct instructions, it has down clocked the Memory speed to 900MHz for 115GB/s, has to be a bug in the latest video bios MSI has provided i wonder if anyone has anything information out their about this, since it does effect performance i have noticed.
    Thank you very much.

    What's the VBIOS version you have now?

  • MSI X800XT PE (Low fps problem)

    Ok, I dont know why I didnt think of this before, but I've been searching all kinds of forums lately trying to get find some answers as to why I seem to be getting really low fps with my MSI X800XT PE.
    Theres no doubt about it. These cards are quick. The problem I am having is that it just doesnt seem to be kicking out the right amount of FPS during game play. For example, when I run 3dMark'05 (ver 1.1.0), (I only have the free version) My total at the end of the test is 5621. This is after I changed to the Omeaga Drivers (2.5.90) Before I upgraded to them, I was still running the catalyst 4.10 drivers and getting about 1000 points less.
    As for Counter Strike:Source I did the video stress test. Video settings are all set to the default recommendation for my system. So everything is on high, Reflect world, Anisotropic 8*, antialiasing 6*, vertical sync disabled. My score was 83.1fps.
    According to just about everyone else who owns an X800 Pro or XT PE they are all getting much higher results than myself.
    I am also running DirectX 9.0c (4.09.0000.0904)
    I would really appreciate it if anyone has any ideas as to why my scores are so low.
    If you require more info please give me a shout.
    Look forward to your reply.
    DOA.

    Thanks for the feedback and links guys.
    Basically I've done most of my comparing on futuremarks page. After you do a test it asks you wether or not you want to submit and compare. So I select all the hardware I own and see what others got. Looking through the pages it just seems that my score is in the last few pages. Another thing when I play CS:Source, during game play I see the fps drop down to 20fps during a heavy battle esp if there is water in the area. Do you guys get that. Theres a console command that shows you how many fps you get a second. Bare in mind that I play it @ 1600*1200 AS 8* AA 6*.  I just thought that these cards would hardly ever drop to 20fps no matter the res and detail.

  • MSI GX70 Destroyer - issues

    Hi
    I have some problems with my MSI GX70 Destroyer. I've had it for about half a year now and I'm very much dissapointed in it's
    gaming performances. I contacted MSI support with this issue and they told me to update my vbios and gave me a link.
    This hasn't resolved my problem, and furthermore, my touchkeys (see image, the buttons for cooler booster, keyboard lighting...)
    don't work anymore.
    Can anyone help me out please? Thanks!
    BIOS Version: E176KAMS.50F
    EC Version: 176KEMS1 Ver5.07
    AMD A10-5750M APU with Radeon(tm) HD Graphics @2.500GHz
    *sorry if this is in the wrong section.

    Not sure if your native EC firmware is 176KEMS1.XXX or 176KEMS2.XXX but you can manually try to flash to another version. Be noted that this should be done in dos with the flash tool.
    http://wikisend.com/download/907702/ENEF_030.zip
    Use the command ene_030 /flash -b34c -e 176KEMS2.507. Check again those function keys work or not. If not, this could be a HW issue.

  • [Solved]Low FPS while gaming Steam games on Linux

    I have low fps (range between 10-30) while gaming Steam games on Linux in e.g. Dota 2 on ultra low graphics  game settings.
    System info:
    Linux 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64 GNU/Linux
    Hardware:
    Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz
    VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller
    NVIDIA Corporation GT 620M
    4 GB RAM
    I have installed next packages:
    extra/mesa 10.4.1-1
    extra/mesa-libgl 10.4.1-1
    multilib/lib32-mesa 10.4.1-1
    multilib/lib32-mesa-libgl 10.4.1-1
    extra/xf86-video-intel 2.99.917-1 (xorg-drivers xorg)
    extra/libcl 1.1-4
    extra/nvidia 343.36-2
    extra/nvidia-utils 343.36-1
    extra/opencl-nvidia 343.36-1
    multilib/lib32-libcl 1.1-1
    multilib/lib32-nvidia-utils 343.36-1
    multilib/lib32-opencl-nvidia 343.36-1
    community/bbswitch 0.8-20
    community/bumblebee 3.2.1-8
    community/primus 20131226-1
    multilib/lib32-primus 20131226-1
    My bumblebee.conf: config
    Logs while starting Steam: steam_logs
    Dota 2 starts with launch option:
    primusrun %command%
    Logs while starting Dota2 form Steam: steam_logs_doat2
    Can anybody help me?
    Last edited by artem.jackson (2015-01-20 09:26:57)

    Alad, I have noticed only one similar error:
    ERROR: ld.so: object 'libdlfaker.so' from LD_PRELOAD cannot be preloaded: ignored
    You probably want to start a 32-bit application with bumblebee on a 64-bit system. See the "Note" box in Installation.
    but I have all needed lib32.
    Or am I wrong?
    Last edited by artem.jackson (2015-01-12 17:50:54)

  • GTx 770 twin frozr low FPS

    Hello. I already made a post about this some time ago, and it came out that my PSU was too low wich gave me low fps in the newer titles, today i got a new PSU - corsair cx750M and i still get the same problem.. i tried games like evolve (i know its alpha but my friend runs it at highest with gtx 660), watch dogs (same i know its not evry well optimised but the fps drops from 50 to 1 randomly same with evolve) im pretty sure that PSU is above what i need  .
    specs -
    GPU - GTX 770 msi twin frozr 2gb factory OC
    CPU - i7 4790k
    PSU - CX750M
    RAM - 2x4gb
    MOBO - msi z97 gaming 3

    i got the same  issue than you (also the exact same psu)
    ram not a problem (gskill sniper cl9 1866 mhz 4x8gb 32 in total) all tested and no problem
    curent cpu: phenom II x6 1090t 3.2 (will receive in the next day my new fx-8370 4.3 ghz 8 core )
    OS on ssd 128 gb (windows 7 64bit ultimate)
    game on 4TB drive (wd black)
    also a 1tb drive (wd black) for pro music software (samplitude pro suite ominsphere komplete9 ultimate...)
    a 2tb for back up (wd green)
    motherboard: ASUS M5A99X EVO
    GPU: MSI N770 TF 4GB OC
    (g19s keyboard and g9500 mouse all logitec...i also notice that closing logitec gaming app reduse stutter and lag a lil bit...)
    m-audio fast track pro sound card (it is not the problem since i got this issue before i install it)
    all temp are ok (current cpu water cooled)
    i have also lots of stuttering in most games and a freeze of ~8-10 sec in company of heroes online and offline)
    also got all lastest driver with clean install (nvidia 344.75)
    and since i really dont want to formatted and reinstall windows cuz just reinstalling all my pro music software take a 4-5 days at least and have the risk to f*** my current music session!!!
    btw is the unigine result (extreme HD) fps: 42.5 Score: 1778 min FPS: 15.8 Max FPS: 82.4

  • MSI GT70 2PE LOW FPS

    My brand  new MSI GT70 2PE DOMINATOR 880M with 8GB of video memory was working just fine, after about 3 weeks of usage, roughly 2 hours a day of Call of duty it started giving me low fps after 10-15 minutes of playing.
    These are the following which I have tried to fix the problem:
    Changed advanced power settings for maximum performance.
    Changed 3D settings for each game individual to have maximum performance in power settings
    Changed 3D settings globally to have maximum performance in power settings.
    Obviously I have chosen NVIDIA GPU to be used.
    When none of these worked, I tampered the void sticker and changed thermal paste, some of the paste was off the GPU and CPU but mostly it was there, so changed it, for both, screwed it back together, and NOTHING HAS CHANGED,
    Temperatures before changing the paste and after did not change as well, while playing are around 60 celcious for GPU and CPU, 140 Fahrenheit.
    So after 5 minutes of playing with new paste FPS drops again to 10 FPS per sec in COD, and this is the case for every game that I have, total war series, cod series, poe, skyrim, every game.
    So does that mean that my GPU is faulty ?
    One thing I've remembered; while I had this issue already, I switched off power plug and played on battery i Played total war 2 on strategic map mostly so fps wasn't noticeable there, after power for to about 28% I switched power back in and started playing COD, for 2 hours while it was charging and I was playing FPS was perfect. Next day problem was there again, I tried to do the same, switched it off till it got to 30% switched power back to play in hope that FPS will be normal, but it was never like this agian, same 5FPS problem.
    And also during 3 weeks of playing I noticed that my power button was mostly of white color, it was changing sometimes to red but mostly white, right now it is only red, if you guys can help me out, id really appreciate it, really this is most powerful notebook there is, i saved for year to get it and I got this crap, I am very very

    So I might have something here, during 10 minutes of play with normal FPS and also while not running anything, 4 cores gave readings:
    0:3692-3791
    1:3592-3692
    2:3592-3692
    3:3592-3692
    So not numbers in between, just these 2 figures for each core
    While not running anything readings on CPU temperature would change randomly between 48c and 55c every 1/3 of a second on every core, every core had different readings in between these ranges.
    After FPS drop readings changed at once to:
    0:3292-3791
    1:3292-3692
    2:3292-3692
    3:3292-3692
    CPU clock would change every 1/3 of a second and also ratio would change rapidly 33,36,37
    I closed the game, for 20 minutes leaving notebook turned on, readings stayed the same giving "after" fps readings, I tried to launch the game again, there was
    immediate low fps
    Consistency of readings on CPU temperature while running the game before and after FPS drop look the same and would change randomly between 54c and 60c every 1/3 of a second on every core, and for every core temperature would be different
    I left notebook for 30 minutes, turned off power fan, and temperature would be between 60 and 64 on some cores and 64 and 69 on others, while not running anything..can that mean that I applied new thermo paste incorrectly ?

  • GX70 destroyer unlocked bios

    hello guys
    i have the Gx70 destroyer (3cc) and i wondered if u can provide me with unlocked bios for it
    curent bios version is : E176KAMS.50F
    THE SPECS ARE:
    amd a10-5750m
    12gb ddr3 1600
    r9 m290x 2gb
    ssd 120
    hdd750
    full hd 17.3....etc
    thx

    well i was hoping for all, probably will go for some cpu oc if posible,  and having some troublles when laptop switches form intergrated gpu on r9 m290x, keep geting blue screens
    exampe, if i play the game, and lower it 2 see mesagee on faceboook for examplle, and then when i clik on the game buton 2 enter it again the laptop frezzes
    i trayed different drivers and option in the ati ccc to stay on r9 m290x all the time but it doesnot work every time, so it would be nice if i could disablle it in bios olso

  • Wrong graphics card in my GX70 Destroyer 3CC

    I bought a new MSI GX70 destroyer model# GX70 3CC-203US and everywhere it says that this notebook has a Radeon R9 m290x graphics card, like on the MSI website, the box, and the stickers on the laptop itself. However, on actual system config and device manager it shows "Radeon HD8970m" as the graphics card, which to my understanding is not the same card as the R9 m290x.
    Is this normal at all?

    Like Pegasus say, use the latest vga driver from msi website should solve the problem.
    ATI graphics driver(131.52) http://download.msi.com/nb_drivers/vga/ati_r9_131.52_0x7a41faed_w878100.zip
    If you're using the generic graphics driver from AMD, then it'll show the wrong graphics name in the device manager.
    http://www.msi.com/faq/nb-1156.html

  • Creating automated email reminders to users every 2 weeks via Workflow 2010 Out of Box approach only

    Hi,
    I have been asked to automate the email reminders to users (every two weeks) from the SharePoint2010 solution.
    I am trying to achieve this via workflow ,but am unable to get the results.
    Req :
    Twice a month the users should get an automated email reminder for a specific task.
    1. On 14th (or last working day in mid month -1) of the month. ( a field "mid month end" captures the date as 15th of the month)
    2. On last working day - 1 of the month. ( a field "month end" captures the date as last day of the month)
    Please let me know how i can achieve this via Out of box functionality. I donot have exp with workflows so a detailed steps guidlines will be very helpfull.
    Regards,
    Guru

    Although you can start a workflow and then pause it for a number of days, I'd feel uncomfortable with that. If the farm crashes, who guarantees that the paused workflows will pick up where they were left off?
    SharePoint does no offer to run a workflow on all items in a list/library -- which I feel is a big draw back. 
    The good news is that there is a free 3rd party tool that can run a workflow on all (or specific) items in a list or library.  It's called the
    HarePoint Workflow Scheduler and I love it.
    You can create a view that shows the items that you want to run the workflow on.
    Or, if you know how to write CAML, you can feed the CAML Query right into the HarePoint Workflow Scheduler task. 
    At my company we have several sites in production that use the HarePoint Workflow Scheduler with a view. 
    So, first, create a SharePoint Designer workflow and define it to run manually.
    Then use the HarePoint workflow scheduler to define a schedule.
    You can define a schedule for the HarePoint tool, like every day, month, week, etc., by just clicking a few boxes. 
    Since this functionality does not come out of the box with SharePoint 2010, this free tool is a real gem. 
    cheers, teylyn

  • Macbook Pro Retina mid 2012 low fps in bootcamp

    Hello,
    My English is not so good, so sorry if it's not correct, but I hope anyone could help me.
    I have a Macbook Pro Retina mid 2012, 2,3 GHz Intel Core i7, 8 GB ram, 250 GB SSD.
    My problem is when I go to bootcamp for gaming I get realy low fps. The most games start at 30 fps, but then they drop immediately to 8/9 fps and a second later back to 30 fps.
    It's like a car, when you drive to hard you have to slow down, but then you drive to slow so you need to go faster. He speed up and a second or 2 later he kicks on the brakes and a moment later he speed up again and kicks again on the brakes.
    Even with al the game setting on realy low and the lowest resolution. And that al the time in every game. My bootcamp is Windows 8 but in Windows 7 did I have the same problem. I did already a SMC reset and Pram reset and 5 clean installs. But nothing works. I installed al the updates in OS X en in Windows. There al alrealy some forums about this problem, but by them was a SMC reset enough. Maybe something is wrong with my Nvidia grapihc card. The problems starts everytime when the Nvidia card need to do this work.
    it's quite an annoying problem, it's not a cheap laptop, but my old laptop ( 2 years old ) are the gaming performs better compared to this one. I think the problems start after this SMC update http://support.apple.com/kb/DL1559?viewlocale=en_US but I'm not quite sure.
    Are there more people with this problem, please let me know. And maybe how you solve it.
    I hope realy if any one could help me.
    If you know a anser, please give it in a comment
    Thanks,
    Gerwin Tiemens
    <Email Edited by Host>

    Hello gerwintiemens,
    I recommend resetting your SMC and your PRAM. Perhaps even a safeboot as well.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Mac OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/ht1564
    All the very best,
    Sterling

  • Getting low FPS on MacBook Pro Retina 15" (2012) even after resetting SMC

    I am getting very low FPS on Guild Wars 2 (between 25 and 40) and on Dibalo averaging at about (30 FPS) when playing on 1440 Resolution and Medium Settings. I've seen videos online with much better FPS using the same configuration as my Mac.
    I've reset the SMC, PRAM and made sure that the nVidia card is running using gfxCardStatus
    Anyone knows if this could be a faulty GPU Card?

    I would make sure it's not running the game in the screens native res as that would be soo high even a gaming laptop would struggle

  • How to change font size in a call-out tool box?

    Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
    Sherman

    This is a question for the Acrobat support forums – please post there.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 23 Nov 2011 10:55:07 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: how to change font size in a call-out tool box?
    Re: how to change font size in a call-out tool box?
    created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

  • Just took my iPod classic 160GB out of box turned it on and accidently hit clickwheel or button and eveything is in language other than english.  How do I get it back to english without being able to read symbols.

    just took my iPod classic 160GB out of box, turned it on and accidentially hit a button changing the language from english to something else (chinese or japanese).  All I see now is symbols.  How do I turn it back to english without knowing what any of these symbols mean.  I started clicking buttons and click wheel and can't seem to get to any section with various language options.  Please some help me get it back to english.

    There are two options. The first is to learn whatever language you have it set to, the second is to find someone else with an iPod Classic and read the English menu and follow it in your iPod. I also believe you may be able to set language perfunces from within iTunes while the iPod is docked, providing they are in English.

  • How to hide views in a SharePoint2010 list by using out of box solutions only

    Hi,
    I work on a Time Reporting tool which is used by the users to submit their time sheet twice a month.
    The submission of time sheet is done through a MS INFOPATH 2010 form. The data then gets submited to a List named "Time Sheet List".
    This list has several important views already existing. These views had been created by the designer (not me) .
    Currently if an user submits his/her time report once,then they cannot edit/delete it. Only the admins [Me one of them] can do any kind of modifications. 
    I am working on giving the users access to edit/delete their own time report for the current month only.
    I have created a view "Edit Time Sheet" which will show the user only their own time report for the current month only.
    Now the issue is how do i provide permission to the list "Time Sheet List" so that only the "Edit Time Sheet"
    view is visible to the users and the other views are hidden from all users except the admins .
    If i provide edit permission to the whole list then all of the views will become editable which is not wanted.So, i just want the users to see "Edit Time Sheet" view so that they can only modify their own time sheet for
    the curent month.
    Please let me know how i can achieve this through out of box solution as i donot have any dev environment installed in my system. I have only MS INFOPATH2010 and SharePoint Designer 2010 in my system.
    Regards,
    Anena Das

    Hi Anena
    There is no OOTB approach to achieve the same , one simple work around would be
    Edit the view (Site Actions->Edit page) you will see your List view webpart there . Edit the Webpart Properties and Set the "Target Audience". Mention the SharePoint groups in there or users who should view the list view.
    So when a user who is not a part of the target audience navigates to this page , they will not see the list View. You can show some custom message to them "You are not authorized to view this".
    As I mentioned it will be just a work around if u dont want to use Javascript/jQuery and custom components/
    Thanks and Regards,
    Nandini

Maybe you are looking for