Had any URI can forward the IP phone to a other number?

i'm developing a xmla application, i need make a menu to forward the operated phone to another phone number. who can tell me which URI key word can do this? like <URL>Dial:8006</URL>

I'm afraid there's no such thing - but then again you probably already knew that by looking at the ip phone service developer guide.
You could either do it in a hackish way
Push a Key:Soft3 (assuming the cfwdall softkey is at position 3), if successful, push the first three digits, then push however many you still need until you have virtually "typed" the entire number.
Or do it properly which consists of an updateLine which sets the callforward all element to the desired number (probably preceded by a getPhone to figure out which lines are on the phone).

Similar Messages

When I send emails using my iPad, recipients are telling me that I am sending them blank emails. I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white...

When I send emails using my iPad, some recipients are telling me that I am sending them blank emails. I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white. Interestingly enough, I was a Windows user just a few months ago and I was on the receiving end of this same problem with someone who was sending emails from her iPhone. I don't believe it is happening every time but if it happens even once it's a problem. Any idea what's going on?

Oddly enough, having reported the problem it appears to have fixed itself. There may be some combination swipe gesture that triggers it is all I can think because I suddenly manged to zoom my display x3 by double tapping three fingers. Took me a while to sort this out but then when I got back home I could suddenly see all my emails again. Bizarre!

Plz any one can forward this book to me!

Hello Oracle Masters,
Plz any one can forward this book to me! my mail id- [email protected]
" Mastering Oracle PL/SQL: Practical Solutions By CONNOR MCDONALD, WITH CHAIM KATZ, CHRISTOPHER BECK, JOEL R. KALLMAN, AND DAVID C. KNOX"

user600520 wrote:
Hello Oracle Masters,I hate titles and salutations like these being thrown around. There are no "+masters+" here.. or "+gurus+".. or any form of so-called superior beings. That is simply a bunch of baloney on the part of those who claim these titles, and kind of pathetic of those who use these titles to curry favour.
Plz any one can forward this book to me! my mail id- [email protected]
It is silly to share your e-mail address in a public forum. It only opens your mailbox to abuse and spam
" Mastering Oracle PL/SQL: Practical Solutions By CONNOR MCDONALD, WITH CHAIM KATZ, CHRISTOPHER BECK, JOEL R. KALLMAN, AND DAVID C. KNOX"Books are usually copyrighted and cannot be electronically copied and shared as that would be illegal. And I'm sure that you do not want to commit a crime...
There are however books that can be read (and downloaded) on the Internet for free. Try http://docstore.mik.ua/orelly/oracle/ - these contains such books, dealing with PL/SQL.

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?

How do I get the sync of my 3GS on my computer to transfer everything (files, apps, etc.) to my new iphone4? And then how do I move the sync to a newer computer so I can sync the new phone with the new computer?
My 3GS is dying and it's synced to an older computer. I have tons of datafiles as well as apps, music, text messages, etc. that I need to get moved to the new iphone4 I'm getting. Then I need to move the sync to a newer computer so that I can sync the new phone and new computer.
I understand how to get my apps to transfer to a new pc. That's not the issue. It's getting ALL the data from the 3GS to the 4 and then to a new computer.
Thanks.

Thanks much, that's very helpful for step one (getting old phone onto new phone). Very clear.
However, I still have the problem of moving to the new computer. How do I move the sync to the new computer after the new phone is set up?

I want to learn about workflow any one can provide the guidence for me

i want to learn about workflow any one can provide the guidance for me

SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
Features
SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
Please follow the links,
http://help.sap.com/saphelp_nw04s/helpdata/en/04/926f8546f311d189470000e829fbbd/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a1/172437130e0d09e10000009b38f839/frameset.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.sap-img.com/workflow/sap-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Regards,
Sai

HT204266 25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?

25 apps on my wife's phone need updating and now it "Cannot connect to iTunes Store" only when i try to update them for her. I can access the iTunes store for all other options but not to update. How can I get her updated?

Try quitting the App Store:
Tap the home button to get to the home screen. Then double tap the home button, and hold your finger over the App Store icon. Tap the red when it appears. Tap the home button again to return to the home screen.
Try resetting:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

Do any one can suggest the lifespan of i pad 4or i pad generally when no accident?

do any one can suggest the lifespan of i pad 4or i pad generally when no accident?

My iPad 2 will still give me 8 to 10 hour of continous use. It depends on how you look after your battery.
Battery care
1. Make sure you run the battery down to 5% and then charging it to 100% once a month.
2. You should start charging your iPad when the battery charge is less than 10%. Over discharging the battery will shorten the lifespan of its battery.
3. Never store the battery fully discharged. Apply some charge before storage, and then charge fully before use.
4. When possible avoid frequent full discharges. Instead, charge the battery more often. There is no concern of battery's memory when applying unscheduled charges.
5. Avoid iPad from overheating > 35°.
6. Remove casing/sleeve when charging to allow heat to dissipate from back cover
7. To safe battery power turn off :
a. background app refreshing
b. push notifications and/or push mail
c. lower screen brightness
d. minimize the use of location services
e. increase Fetch New Data interval.

Any way to get the old behavior of "Hyperdraw Other"

In Logic 4.7 one could type ^Command-O to bring up a dialog, then simply type in a controller number and RETURN. That's all you needed to do to hyperdraw any arbitrary controller.
In Logic 7 you type ^Command-O which brings up a long list. No text entry box. You are then forced to use your mouse to scroll waaaay down the list to the controller you want. To add insult to injury you are then forced to use the mouse again to click on the close box to close the window. Yes, this is one of those nifty new-fangled windows without a "CLOSE WINDOW" key command.
Is there any way to replicate the old behavior of Hyperdraw >Other?
I don't want to rant but it seems to me that the speedy interface of logic 4.7 has given way to uber-bloat in logic 7. I hope this isn't the general direction things are going.

Hi K,
⌘ W
Yes, it does close the floating window on my system.
Coming fresh off the transition from 4.7 the distinction is vivid. You may not remember
Probably not, since I made every upgrade along the way, though skipped a lot of V5's primetime.
In my opinion once you start adding up a bunch of "nowhere near as terrible"s and your forced to do them again and again day after day they add up to one big terrible.
Agreed - but some adaption is of course to be expected (at least, IMO). Some is for the better, some is for the worse. Overall, I find the workflow faster with 7 than 4 but again, my memory is not as vivid as yours.
Cheers,
J

2 iphones, registered to same apple account but the second phone was orginially set up on a different computer.Is there any way I can sync the second phone to the orginial computer so as to have both phones syncing the same?

Have two 4s's registered under the same apple account. The 1st phone was set up on the computer perfect. The second phone was set up by somebody who didn't know what they were doing and set this second phone up using the same apple id but onto a laptop. How do I know get the second phone to work from the computer and sync the two phones so they are the same?

Hi dwilliams23,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful:
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Cheers,
Jeremy

When I view emails on my Iphone, I can see the senders phone number. How can I ensure other recipients cannot view my contact information?

I have upgraded to the IOS 8.1 on my Iphone 4S. I recently noticed while I check my emails I can see read the senders phone number. There is even a prompt to add their contact information unto my phone. Is there a way in which I can block my contact information from others?

As simply as I can manage this is the idea behind phone numbers and emails in iMessage. All of this is example only. Apply it to your personal situation. iPhones have phone sevice, iPads do not. Both can use iMessage but how if the iPad has no phone number? Via email. So from your iPhone you want to send a message to your brother who has an iPad so you would send it to his email. Apple's server then takes the message and says "hey that dudes iPad is using this email for iMessage" and sends the message to the device. Your brother then sends a message back from his iPad to your phone number. Apples server then says "hey that dude is using this phone number on his iPhone we'll send it there, but wait that number is also being use for iMessage on that iMac (Messages OS X 10.8.2) lets send it there too". And you receive the message on both your iPhone and iMac. The benefit of setting an email to recieve iMessage on your iPhone is if you have an iPod touch or iPad (they recieve at email) that you want to recieve the messages along with the iPhone. With that your brother and his iPad would send a message to your email, instead of your phone number, and the iPod, iPad, iPhone, Mac or any other device you have that can use iMessage will recieve the message from your brother.

Does anyone know where i can get the apple phone number ?

hey i dont know to find the apples phone number can someone send me a link?

Do you by any chance mean one of the ba-zillions you can find by clicking the *Contact Support* link at the bottom of the page? (;>)
Joe

The apple store replaced my phone due to it being defective. I had purchased some applications on the old phone how do I reinstall them on the new phone?

The Apple Store replaced my defective iPhone today. I would like to get the applcations reinstall on the new phone. How can I get this done?

Click on the iTunes App. Select "Purchased" and you will find them with a cloud symbol next to them. Re-download...
Sly

Is there any way can stop the automatic mode channel?

Hi Expert,
I wanna confirm if there are anyways can make the automation mode channel to be stopped, excepting stop the channel in
the "Runtime Wrokbench" of the Browser by manual.
I expect the manner as using the Http Request to stop the channel.
Is there any way?
( I consider maybe the way using Http request to stop the automation mode channel is not viable. cause I got the error msg describe as follows:
The channel "GSCMDRECEIVERBJ/XIF_JAVA/APS2GSCMDBJ_RECEIVER_CC (GUID 9c094a53361438e6947efba69a4c7715)" is configured to use an automation mode not compatible with the type of the current principal (WSUSER). The channel was not started. Change the channels automation mode and repeat the administrative action. )
Thx in advances.
Brian

Hi Brian
Check this blog " Control Communication Channels Externally without using RWB "
/people/william.li/blog/2007/05/04/control-communication-channels-externally-without-using-rwb
I guess it might help you
Regards
Harish

Any user can block the system

We have a Sunfire 6800 and Solaris 8.
I found out that any user can use up all available semaphores and shared segments, system wide.
Then system enters to unstable situation, which many important processes fail.
To resolve this situation, one can use ipcs command and take back reserved memories and semaphores from that "user"...
But this is after something happens.
To avoid something happens, do you know a method or a tool in Solaris 8 or 9 to restrict usage of semaphores and shared segments for each user or group of users?

Hi, thanks for your answers and advices.
But:
In those documents I am not able to find the answer of my question.
I am a Unix guy but not Solaris specialist yet. With those parameters,
I could only see the possibility of increasing or decreasing system wide
availability of semap's and shm's. But this won't stop any user
to use up all.
I found this vulnerability in the acceptance tests of our new Sunfire platform.
Sun engineer wasn't interested in and told me that I can disable
any Unix server like this (I don't know I haven't tried it in another).
But I found that denial of services in Solaris machine (8 cpu, 8 gb)
was extremely easy.
What I think is, there should be something to limit semaps and shm's per user, not per process or system wide. I could not believe the otherwise.

Any body can tell the solution for these questions?

1) If in case we r using OEM Grid controller,at that time database is running slow.so we can do the database is up , at the time what we have to do and how to clarify this problem ?
2) we r using 4 databses and we have multiple segments of 4 databases...users can use heavly for all databases segments @ that time databases contain heavy burden, so this case arise what we have to do for reducing the burden for databases?
Thanks, for giving sol. for these questions......

No wonder, you didn't get answers to these questions, because this is not the right forum, and also the questions are very vague.
user13096226 wrote:
1) If in case we r using OEM Grid controller,at that time database is running slow.so we can do the database is up , at the time what we have to do and how to clarify this problem ?
2) we r using 4 databses and we have multiple segments of 4 databases...users can use heavly for all databases segments @ that time databases contain heavy burden, so this case arise what we have to do for reducing the burden for databases?
Thanks, for giving sol. for these questions......

Had any URI can forward the IP phone to a other number?

Similar Messages

Maybe you are looking for