Hardware starts to fail running certain programs
Hi I have an older macbook pro, late 2008, and it runs fine, but the past month when I'm running certain programs (ableton live, photoshop, even word sometimes) all of a sudden my trackpad stops clicking, the mouse icon dissapears, and none of the keyboard buttons work. I can plug in stuff to the USB slots, but they don't work either ie mouse. I then proceed to manually shut the computer off by holding down the power button, but I hate doing that. what should I do? anyone have an issue with this? It has all started after I downloaded maverick, and it's really irretating and bad for my computer being that I use it so often for work.
The error message you're getting is the error message the
server is sending. You need to figure out why the server
is sending that error message.
One thing that might help debug the problem is to keep
the debug log files for every session, at least until you
know the send is successful. If a send fails, save the
debug log file for later examination. Then you can see
the entire protocol trace with the server.
See the Session.setDebugOut method.
One possibility here is that you're running into a bug in
your application that, after some time, causes it to lose
your session configuration properties, which could cause
it to fail to authenticate, or even cause it to connect to the
wrong server. Look for race conditions in your application.
Similar Messages
-
My computer is running SO slow. The intermet also keeps freezing up and I have to turn airport off then back on/refresh before it will work again. I dont have enough space on my start up disc to run certain programs. It will say I need to quit programsin order for things to run. Easiest way to fix? Im not great with computers!
Running mac os x version 10.6.8Easiest way is to have an external drive to which you copy the things you store like pictures, movies, and music
which take up a lot of space. Then delete them fron the main drive and clean it up with one of the maintenance utilities. You can readily access the external drive's contents whenever you wish.
http://lifehacker.com/5814440/what-kind-of-maintenance-do-i-need-to-do-on-my-mac
http://mac360.com/2008/07/the_top_7_free_utilities_to_maintain_a_mac/ -
I accepted the offer to download Firefox 5 and followed all the instructions. Everything seemed to be ok until I tried to install the Evernote Web Clipper. I was then told that I was running Firefox 3.xxx...
If I have downloaded Firefox 5 how do I make sure I am running 5 and not my earlier version?Please do the following.
Click '''Help '''| '''Check For Updates'''. The option to update should appear and version 3.6.17 should download and install.
However, sometimes things go pear-shaped and you get version 3.5.19. If that happens, repeat the same steps to update to 3.6.17.
Once you have 3.6.17 installed, you'll get the opportunity to update to the current version which is 4.0.1 ''Please don't do that for the moment because you first of all have to update your plugins''. To do the latter, please do the following.
Go to http://www.java.com/en/ and install the latest version of Java.
Update Adobe Shockwave for Director via http://get.adobe.com/shockwave/
Update Adobe Flash via http://get.adobe.com/flashplayer/
Update Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
For security details regarding the Adobe updates, see: http://www.adobe.com/support/security/advisories/apsa11-02.html
Once you've updated all those, go to '''Help '''| '''Check For Updates '''again to update to version 4.0.1 -
is there a way i can submit my crash report here so someone could look at it and let me know what's causing the issue
Mon Jan 7 10:46:09 2013
panic(cpu 1 caller 0xffffff8016cb7b95): Kernel trap at 0xffffff8016c43c71, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffbf802ba06d38, CR3: 0x00000000396ac000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000009000000, RDX: 0xffffff8019f70260
RSP: 0xffffff80fe9b38c0, RBP: 0xffffff80fe9b38f0, RSI: 0xffffff80fe9b3998, RDI: 0xffffff8019f70250
R8: 0x0000000000001000, R9: 0x0000000000000000, R10: 0xffffff802b8b2894, R11: 0xffffff7f983e2c32
R12: 0xffffbf802ba06d30, R13: 0xffffff8019f70250, R14: 0xffffff80fe9b3998, R15: 0x000000000000d000
RFL: 0x0000000000010286, RIP: 0xffffff8016c43c71, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffbf802ba06d38, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80fe9b3560 : 0xffffff8016c1d5f6
0xffffff80fe9b35d0 : 0xffffff8016cb7b95
0xffffff80fe9b37a0 : 0xffffff8016cce4ad
0xffffff80fe9b37c0 : 0xffffff8016c43c71
0xffffff80fe9b38f0 : 0xffffff8016c435a2
0xffffff80fe9b39d0 : 0xffffff8016c245bd
0xffffff80fe9b3a00 : 0xffffff8017022a92
0xffffff80fe9b3a20 : 0xffffff801704a488
0xffffff80fe9b3a90 : 0xffffff801704a91d
0xffffff80fe9b3ad0 : 0xffffff7f983bf32b
0xffffff80fe9b3b50 : 0xffffff7f983e2d00
0xffffff80fe9b3ba0 : 0xffffff8017065313
0xffffff80fe9b3bc0 : 0xffffff8017065eed
0xffffff80fe9b3c20 : 0xffffff80170638ef
0xffffff80fe9b3d70 : 0xffffff8016c981a1
0xffffff80fe9b3e80 : 0xffffff8016c20abd
0xffffff80fe9b3eb0 : 0xffffff8016c10448
0xffffff80fe9b3f00 : 0xffffff8016c195fb
0xffffff80fe9b3f70 : 0xffffff8016ca5ad6
0xffffff80fe9b3fb0 : 0xffffff8016cced13
Kernel Extensions in backtrace:
com.apple.GeForce(8.0)[91C40470-82BA-329A-A9D7-4C70F28275FD]@0xffffff7f9839f000 ->0xffffff7f98461fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f973 47000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[E37F420A-B5CD-38ED-9441-5247583B6ACE]@0xff ffff7f97333000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f972ac000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[5D671681-D21B-3CCA-9810-B15E648C1B27]@0 xffffff7f972f0000
BSD process name corresponding to current thread: WebProcess
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000016a00000
Kernel text base: 0xffffff8016c00000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 313602632952
last loaded kext at 175849006273: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f97216000, size 229376)
last unloaded kext at 176246764692: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f98d75000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.69
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleLPC 1.6.0
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.nvenet 2.0.19
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0 -
My iphone stalls and freezes while running certain programs
i just bought my iphone four days ago, it keeps locking up when i press the mail button or the weather button. then the whole screen goes to black. it has also done it once on the text messanging screen. is there something wrong with the phone, should i take it back. and also the edge of the chrome trim around the screen is off centered and has a sharp edge on it where you would grab it with in your palm
First sync your phone to your computer so you data is safe. Then you might try the Restore option on ITunes. If this doesn't fix the problem I think I would take it back to the Apple Store for a replacement if it were mine.
Hope this helps. -
Music in iTunes Speeds Up When Certain Programs Run
Like the title says, sometimes, when I run certain programs and iTunes simultaneously, the music in iTunes starts to automatically play as if in fast-forward, but as soon as I close the program, the music starts playing fine again. Is there a solution besides the obvious one of not running the two programs simultaneously?
I'm having the same problem with my nano. Podcasts will sometimes play normally, and other times will be sped up and play much faster than normal. I've set the Audiobooks setting to "Normal" as opposed to "Fast" but it doesn't make any difference. And it's inconsistent...I was listening to a podcast at normal speed and paused it, and the next day when I went to resume it, it played at the fast speed. Any ideas here?
-
In Lion, running on an I MAC, (late 2006), how can I stop certain programs (iTunes, Word) from automatically starting up when I start the computer?
Any application that is open when you shut down will re-open when you restart unless you deselect this when shutting down/restarting:
Also check System Preferences>Users & Groups>Login items tab and make sure there's nothing listed there that you don't want launched. -
My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.
Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
Mac OS X 10.6 Help: Reinstalling Mac OS X -
I plugged my iPad to my computer this morning and it said there was a new version of IOS available. Tried to install.
Install failed.
Now itunes won't open: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
Went to www.itunes.com, downloaded and tried to install. Install failis saying I need to verify that I have credentials to run the program. Choices: Abort, Try again, Ignore. Needless to say the only choice that works in Abort, so I can't connect my iPad to iTunes.
Is there a way to uninstall the program and then try again?
Or other fix?How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
Cheers, Tom -
Auto-start services not running :Shell Hardware Detection in my Health Reports
Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?
Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems -
I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you
Here are the iPad Mini specifications:
iPad mini - Technical SpecificationsNov 1, 2012
The specifications explain exactly what types of files are supported under "TV and Video". -
Running Java program created with Eclipse plugin fails to open report
I created a CR 2008 report and using the Eclipse plug-in I created a Java program to drive data through the report and export the resulting reports as pdf files.
This process works just fine if I run the Java program in Eclipse. I copied the code to a server to run the application remote.
The program fails at the point of opening the Crystal Report. This is the error.
D:\src>java EDIInvoice
Current date : 2009928-
Report output name is : D:\src\report\Invoice2009928-45462829.pdf
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com/ibm/icu/util/Ca
lendar---- Error code:-2147467259 Error code name:failed
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.<init>(Unknown Source)
This is the code
public class EDIInvoice {
private static final String REPORT_NAME = "D:
src
CR8Invoice.rpt";
public static void launchApplication() {
try
FileInputStream in = new FileInputStream("D:
src
ghxInv.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
Calendar cal = new GregorianCalendar();
int month = cal.get(Calendar.MONTH);
int year = cal.get(Calendar.YEAR);
int day = cal.get(Calendar.DAY_OF_MONTH);
String today = (year + "" + (month + 1) + "" + day + "-");
System.out.println("Current date : " + today);
// Read the file one line at a time
while ((strLine = br.readLine()) != null)
String patternStr = ",";
String[] fields = strLine.split(patternStr);
String EXPORT_FILE = "D:
src
report
Invoice" + today + fields[1] + ".pdf";
String Company = fields[0];
String Invoice = fields[1];
String PO_number = fields[2];
System.out.println("Report output name is : " + EXPORT_FILE);
try {
//Open report.
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(REPORT_NAME, 0);
System.out.println("Opened the report");
As you can see the first 2 println statements worked fine, but the 3rd one failed. The program was not able to open the report.
Is there a reason the code can not run without Eclipse?did you copy all the jar files? especially the jrcadapter.jar? please download the following sample and modify it accordingly:
[http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f087d31f-3e11-2c10-2cba-fcb5855f79ef] -
Issue while running page OC4J start up failed.
Hi,
I am working on two instances one is Local and another is in abroad.
Now when I am running simple Hello World Page by giving Local Instance connections The page is loading quickly and running fine.
Now when I am running the same Hello World Page by giving Abroad Instance connections The page load is taking almost 9-10 mins and running fine.
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?
2) Is it the OC4J Issue?
Can anyone breif this senario and how to over come this issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.
Thanks,
Krishna
Edited by: user1000 on Feb 7, 2011 5:29 AMI am working on two instances one is Local and another is in abroad.What is your application release?
In the above cases what might be the issue with Abroad Instances for loading page.
1) Is it the Network Issue?Could be one or more.
Can you reproduce the issue with other Self-Service pages? Any performance issues with forms?
2) Is it the OC4J Issue?What about local users who access the same page from the same network, do they encounter the same performance issues?
Can anyone breif this senario and how to over come this issue.Before investigating the performance issues with the instance/server (which are discussed many times in the forum, so just search old threads for performance tuning and you will get many hits), I would suggest you answer the above two questions to determine whether this is a network issue or an instance/server issue.
And one more Issue is
Took the remote desktop of the Abroad Machine Installed JDeveloper in it and while running the Hello World page the Message OC4J start up failed is getting popedup in the Message.
In which cases we will get OC4J start up failed error.What is the error?
Thanks,
Hussein -
I have a 6 week old 4s running 5.1.1. Started recieving "failed sim" message yesterday. this leaves me with no cell service. Shutting down and turning back own seems to alleviate problem temporarily. It has happened three times now. Help.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
Macbook not opening certain programs and running others slowly.
My macbook has recently started not opening certain programs on my computer, such as garageband and iweb and others shut down randomly in the middle of using them. I also can't access the other account on my computer. I downloaded virus protection and ran that, but my computer is still not working right! What should I do? Any help would be greatly appreciated!
Start with http://www.thexlab.com/faqs/multipleappsquit.html The Tiger stuff should be applicable.
Maybe you are looking for
-
Mail and sent items folder on Yahoo!
(Firstly I'm running the latest version of Mail on the latest OSX on an iMac, and MBA, iPads and iPhones). What is it with Mail on oSX and how have Apple managed to make it so much worse than Mail on iOS?!!!!! First issues, if you can help please. I
-
Need help for total of Dr and Cr. in report painter
Hello friends, I have created the trail balance in report painter. In table faglflext table. I created the common column of debit and credit cumulative balance and then separated the problem is I am not getting the total of all the debit and cred
-
Yosemite FileVault resizes application reopened windows after login
HI, I have a weird behaviour of reopened application windows (Reopen windows when logging back in feature) after I switched on the FileVault disk encryption. I think that it could be due to the fact that login screen is in 1280x800 resolution and my
-
I have a <SPAN class=GraySubTitleBoldund>Sound Blaster Audigy 2 ZS and want to hook up my Sony Handycam DCR-TRV260. <SPAN class=GraySubTitleBoldund>It appears the ieee394 on the Sound Blaster is a 6 pin. <SPAN class=GraySubTitleBoldund>Is that correc
-
Bridge removing file extension after batch rename
Hi All, I've been having trouble with what appears to be a problem with Bridge in Photoshop CS2. I'm well aware this is an older version but, in this case, I don't think that should matter. Here is my situation: After batch renaming jpeg files, I've