Have downloaded the new software for itunes but it seems to be stuck on "running package scripts" any ideas?!?!

why is i stuck on "running package scripts"?

I've checked the "More like this" section and seems to be mostly a PC problem? I'm using and Mac though. I've also unpluged the only other USB that was plugged. Can anyone help?

Similar Messages

  • Dropped my Ipod, I have put it in Disk Mode, I have downloaded the new software, tried to restore it and it has seized please help?

    I dropped my Ipod (4TH Generation Ipod Nano) I have got it start up again I have put it in disk mode and connected it to Itunes,
    I have downloaded the new software through Itunes, that went well, it came up as normal.
    I have got it to restore to factory settings. (Although before hand it synced and all that)
    During this process it has seized and not done what it was suppose to, only displaying the Apple Symbol.
    I disconnected, and it has gone flat and now is telling me to connect it to power, when I do so nothing happens.
    It won't connect to itunes.
    Please help.
    MJ

    Hello there pipem90,
    Heres an article about that very issue. Check out this article named iPod not recognized in 'My Computer' and in iTunes for Windows found here http://support.apple.com/kb/ts1369.
    There is more to the article but start here:
    1. Start with the iPod Troubleshooting Assistant
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant which applies to your iPod; this will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    All the very best,
    Sterling

  • I have downloaded the latest version of itunes but when i plug in my ipod it doesn't come up as a device so carn't sync. Its like theres something blocking my computer link with itunes please help!

    I have downloaded the latest version of itunes but when i plug in my ipod it doesnt list any devices in itunes to enable me to choose my ipod to sync it. Its like there is a link missing or something blocking my computer talking to itunes. My computer itself recongnises the ipod but itunes doesn't. Please help!

    Yes reinstalled itunes a couple of days ago but got it sorted now thanks, the problem was that when i wiped my computer last week and reinstalled everything using the discs the free McAfee anti virus that the computer came with was still in my all programmes list although i aren't using it. This morning i tried unistalling that (didn't think it would make any difference as the programme wasn't active) once uninstalled i pluged the ipod in and hey presto it is now recognised by itunes, THANK GOODNESS. So panick over for now, thank you very much.

  • Now that I have downloaded the new software, the contact name disappears and just the number shows up on my text.

    Now that I have downloaded the new software for my iphone, the contact name of the person who is texting me disappears and only the phone number is there. This only happens if the person texting is using an iphone.
    Any solutions?

    You just need to restore your phone and if you can then you must get an iphone 5s. Its the best iphone ever. I advise you stay away from droids if you have used an apple device. Well like many people you can also keep two phones one apple and one droid.

  • HT201413 i cannot restore my ipad software i had download a new software on itunes but i couldnot download it on ipad or restore the old software and the problem is restoring ipad firmware

    i cannot restore my ipad software i had download a new software on itunes but i couldnot download it on ipad or restore the old software and the problem is restoring ipad firmware

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT204291 I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar.  The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

    I have downloaded the new Lion OS X but the AirPlay icon wont appear in my menu bar.  The option of AirPlay mirroring is turned on in the Display settings. No issues Air playing through iTunes. Need help. Thanks

    AirPlay
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay

  • I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    What is the exact error message you are receiving?  Have you checked to make sure the connections on each end of the USB cable are nice and snug?
    B-rock

  • Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK.

    Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK. Help.

    I actually interpreted this as a carrier lock issue.  If that is the case the OP needs to contact the UK carrier who owns the rights to lock the iPhone.  Only that carrier can unlock it. 
    Was the iPhone unlocked by means of jailbreak software? If that is the case, then the reply from Phil McCafrey would apply to this as well.

  • HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

    I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

    i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I downloaded the new software for mac book pro with retina and the office doesn't work

    I downloaded the new software for mac book pro with retina and the office doesn't work

    cynthia alia wrote:
    I downloaded...
    ... but did you INSTALL it?
    Office::2008 was drag & drop, but Office::2011 has an installer you need to run.

  • I download the new version of itune but it wont work the itune store can not connect even my apply id wont sign in it has an error 9808

    i download the new version of itune but it wont work the itune store can not connect even my apply id wont sign in it has an error 9808

    Hello SAB7700,
    This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • HT201210 I am having problems downloading the new software for my Ipad. It says that I dont have premission to access the requested resource.

    Ipad does not want to download the new software. It says that I dont have the premission to access the requested resource.

    Are you plugging into iTunes
    and if on a PC reboot the PC to start
    and reset the iPad

  • TS1474 I have had to restore my pc to a place back in time when it worked correctly, this meant thad iTunes was deleted. I have downloaded the latest version if iTunes but my Ipad wont sync. I get a message saying this Ipad is sycned with another iTunes l

    I have had to restore my pc to a place back in time when it worked correctly. This meant that iTunes was deleted. I have now downloaded the latest version of iTunes but I cant sync my iPad with it. I get the message that this iPad is synced with another iTunes Library and cant sync to this one.  Thankfully all my music library is on iPad. I would be grateful for some help on this issue

    Its solved I just restored it to that point

  • I tried downloading the new update for itunes I get these error messages: Visual C   runtime library R6034 an application has made an attempt to load the C runtime library incorrectly Error 7 windows error 1114.  What should I do to correct this?

    I tried downloading the new update for my desktop PC I get the following error messages:
    Visual C++ Runtime library
    R6034
    an application has made an attempt to load the C runtime library incorrectly Error 7 Windows Error 1114

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99907)

Maybe you are looking for

  • How do I install new Adobe flash on my notebook?

    I have tried several times to download the new Adobe in order to play games on my Mac but it downloads says its complete and for me to restart safari.  Then does not work.  Is Adobe just not compatable with Mac?

  • Using IWEB for .mac homepage/photo gallery

    I have Ilife '08 and am trying to marry the web page created in Iweb ('08) with my (older) .mac account (where my photo gallery resides). How does one connect the beautiful IWEB '08 web page templates with one's separate photo gallery on .mac (which

  • PE6-I restored my backup but now don't see photos/slideshows etc.

    I use windows xp and I backed up one of my catalogues then deleted it from my computer.  I then restored it and was working on a slideshow just fine, THEN, when I later went in to work some more, my catalogue is empty!!!???  How do I get the photos a

  • How do I cut and paste in iBook?

    I am looking for ways to cut and paste info in some of my iBook resources but can't find a way to do it.

  • Regarding Central SLD and Local SLD

    Hello, Can we maintain Central SLD as well as Local SLD? We have maintain central sld during installation , now i want to maintain local sld also. How can we do this? what is the benifit and disadvantage for maintaing both? Regards, V.Singh