Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely
Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>
Similar Messages
-
my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.
Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad. -
Background image in banner area & in one in body are not fully visible
I am a newbie and I created my site with one of the Adobe templates. For a while my site was loading correctly in both IE and Firefox. I don't know what I did, but I had to have changed something. Now the photo in the banner area and one in the body is not visible.
Please help.
URL: http://www.webtivity.me/
CSS Code is:
@charset “UTF-8”;
/* --- CSS Document by Codify Design Studio - codifydesign.com --- */
body {
margin: 0px;
color: #000000;
font-size: 12px;
font-family: Arial;
font-family: Arial, Verdana, Univers;
background-color: #FFFFFF;
h1 {
color: #25476C;
font-size: 24px;
font-weight: normal;
margin: 3px 0px 25px 0px;
h2 {
color: #214265;
font-size: 14px;
font-weight: normal;
margin: 0px 0px 15px 0px;
h3 {
color: #244669;
margin-top: 12px;
margin-bottom: 0px;
p {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 12px;
margin-left: 0px;
a {
color: #36C;
a:visited { color: black; }
a:hover { color: #5872f4; }
.container {
width: 980px;
margin-left: auto;
margin-right: auto;
/* BANNER AREA */
.bannerArea {
width: 100%;
height: 83px;
background-color: #cfcfcf;
.bannerArea .container {
height:83px;
background-image: url(images/banner_bkgd_webtivity.jpg);
background-repeat: no-repeat;
background-color: #000000;
.bannernav {
padding-top: 20px;
float: left;
color: #112c4c;
font-size: 10px;
font-family: Arial, Helvetica, Verdana, sans-serif;
.bannernav a {
color: #000000;
text-decoration: none;
.bannernav a:visited { color: #ffffff; }
.bannernav a:hover { color: #112c4c; text-decoration: none; }
.toplogo {
padding-left: 30px;
padding-top: 5px;
/* TOP NAVIGATION AREA */
.topnavigationArea {
width: 100%;
height: auto;
background-image: url(images/topnav_bkgd_webtivity.jpg);
background-repeat:repeat-x;
background-color: #624C7D;
.topnavigationgroup {
margin: 0px;
float: right;
p/adding-right: 40px;
.topnavigationgroup ul {
margin: 0px;
background-color: #3399FF;
.topnavigationitem {
max-width: 167px;
margin-left: 0px;
padding-left: 10px;
padding-top: 9px;
padding-right: 10px;
padding-bottom: 9px;
border-left-style: solid;
border-left-width: 1px;
border-right-style: none;
border-right-width: 1px;
color: white;
font-size: 14px;
font-weight: bold;
font-family: Arial, Helvetica, Verdana, sans-serif;
float: left;
/* CONTENT AREA */
.contentArea {
width: 100%;
background-color: #f0eff0;
background-image: url(images/content_bkgd_tile.jpg);
background-repeat: repeat-x;
.contentArea .container {
padding-top: 30px;
padding-bottom: 30px;
background-image: none;
background-repeat: no-repeat;
.contentleft {
width: 650px;
padding-left: 40px;
padding-right: 40px;
float: left;
border-right-style: solid;
border-right-width: 1px;
.contentright {
padding-top: 20px;
float: left;
padding-left: 30px;
width: 210px;
.imageright {
margin-left: 5px;
float: right;
/* FOOTER AREA */
.footerArea {
width: 100%;
background-color: #cfcfcf;
border-top-style: solid;
border-top-color: #000000;
border-top-width: 4px;
.footerArea .container {
height: 77px;
background-image: url(images/footer_bkgd_webtivity.jpg);
.copyright {
padding-left: 40px;
padding-top: 12px;
color: #FFFFFF;
font-size: 12px;
font-family: Arial, Helvetica, Verdana, sans-serif;
padding-right: 12px;Banner image looks messed up to me.
Also, check your code.
You have a few CSS errors. Just skip the Spry related ones.
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. webtivity.me%2F
And a missing <html xmlns="http://www.w3.org/1999/xhtml"> tag
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.webtivity.me%2F
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Media files are not fully loaded when Premier Pro CC project is launched
I'm working on a project for more than a month and my Premier Pro(PP) CC was working fine until yesterday. When I launched the same project today, PP does not load all media files. (There are 600 media files and PP loads only around 200). The last message I can see in status bar is "loading media files. 403 remaining..". It doesn't seem to proceed further and leaves the sequence incompletely loaded. Until yesterday, the sequence was fully rendered and PP was loading the pre-rendered files.
I tried opening previous versions of project and faced with similar problems. Sometimes, the sequence doesn't show the red, green or yellow indicators at all. This has never happened in PP before. Wonder, what could be the reason and how i load my project to continue working.
Any help is appreciated.
Thanks
NeoHi,
Can you try to import this project in a new project in cc and check if that solves the purpose or not.
Thank You
Arjun -
Cannot seem to find the apps that it says are installed. They are not on my home screen
If you've checked all of your homescreens and app folders and can't find them (there is a limit of 11 homescreens that are visible), and you can't find them via the spotlight search screen (swipe your first home screen to the right), then are thay hidden by an ap age rating in Settings > General > Restrictions ?
If not then have you tried a reset to see if you can find them after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have installed Proloquo2Go and need to know if everything I put into a new folder in this app will be saved automatically or how do I do this and not lose photos and folders?
Hello dancetoday07,
Let's see if we can square this away for you. With backing up your iPhone, it will back everything you have using iTunes and if you use iCloud, by default, backs up everything. After you have made a backup you can restore that to put the contents of the backup on your replacement iPhone. If you want to put certain things back on, you will at least need to export the content to your computer, like your photos and videos. If you only want to put certain things back on, then you will need to sync that over with iTunes. All the information you will need are in the articles below.
How to back up your devices using iCloud or iTunes
https://support.apple.com/en-us/HT203977
Restore your device from an iCloud or iTunes backup
https://support.apple.com/en-us/HT204184
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC
https://support.apple.com/en-us/HT201302
Sync your iPhone, iPad, and iPod with iTunes using USB
https://support.apple.com/en-us/HT201253
Regards,
-Norm G. -
Field's content is not fully visible in Sap Transaction iview
Hello Friends,
I have deployed a Sap Transaction iview on my portal. I am facing a issue. When i do F4 help on a field, the content of columns is not fully visible in the opened up popup window.
Is there any way to adjust the colum width, so that it accomodates the whole content and doesn't truncate it ?
please help !
Regards,
ViditHi Vidit,
Try to check your Transaction iview directly from the browser / through services not through the EP. If the iview is not working fine then thre is a problem in the code otherwise it has to work
Check your code and try to redeploy
Regards,
sreedhar G -
Labels are not clearly visible on Horizontal Axis
I want to display a full timestamp on the horizontal axis of a LineSeries. But the labels are not clearly visible. The below is the screenshot.
I have already tried using LabelRenderer and set a larger font size and also tried increasing the width of the label itself. But, it didnt work. It seems there is some container for the lable which has fixed width. Does anyone know how to increase this width and make the text clearly visible.
ThanksHi Mohd Fayaz,
Have you tried setting the larger fontSize on LineChart.
<mx:LineChart fontSize="18" />
Thanks,
Bhasker -
I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left) -
In combobox 'g' is getting cut off, 'g' is not fully visible
Hi Flex people,
I am facing problem in combobox, I have the items : 'moon' , 'manager' , 'marketing' in the combobox.
The text 'moon' is fully visible, but the in text 'manager' , 'g' is cut off, means character 'g' is not fully visible.
Please give solution to how to make the 'g' to visible in the selected item of combobox.
Please find the attached snapshot, that will give clear idea.
Thanks,
SushantTry this component:
<?xml version="1.0" encoding="utf-8"?>
<mx:ComboBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init();" updateComplete="adjustComboDropDownWidth();"
buttonMode="true">
<mx:Script>
<![CDATA[
import mx.controls.List;
private var _selectedValue:String;
private var _selectedLable:String;
private var bSelectedValueSet:Boolean = false;
private var bDataProviderSet:Boolean = false;
[Bindable]
private var myDropdownFactory:ClassFactory;
// Override committ, this may be called repeatedly
override protected function commitProperties():void
// invoke ComboBox version
super.commitProperties();
// If value set and have dataProvider
if (bSelectedValueSet && bDataProviderSet)
// Set flag to false so code won't be called until selectedValue is set again
bSelectedValueSet=false;
// Loop through dataProvider
for (var i:int=0;i<this.dataProvider.length;i++)
// Get this item's data
var item:String = this.dataProvider[i].data;
// Check if is selectedValue
if(item == _selectedValue)
// Yes, set selectedIndex
this.selectedIndex = i;
break;
// Trap dataProvider being set
override public function set dataProvider(o:Object):void
// invoke ComboBox version
super.dataProvider = o;
// This may get called before dataProvider is set, so make sure not null and has entries
if (o!=null && o.length)
// Got it, set flag
bDataProviderSet = true;
// set for selectedValue
public function set selectedValue(s:String):void
// Set flag
bSelectedValueSet = true;
// Save value
_selectedValue = s;
// Invalidate to force commit
invalidateProperties();
* @author : Prashant Shelke.
* @date : 17/10/07
* @method name : init()
* @i/p params : -
* @return : void
* @description : To show tool-tip on line items objects of combobox.
public function init():void
myDropdownFactory = new ClassFactory(List);
myDropdownFactory.properties = {showDataTips:true, dataTipFunction:myDataTipFunction}
this.dropdownFactory = myDropdownFactory;
private function myDataTipFunction(value:Object):String
return (value.label);
* @author : Prashant Shelke.
* @date : 17/10/07
* @method name : adjustComboDropDownWidth()
* @i/p params : ComboBox
* @return : Number
* @description : computes dropdown width according to what dataprovider provided to it.
private function adjustComboDropDownWidth():void
this.dropdownWidth = calculateCustomPreferredSizeFromData();
* @author : Prashant Shelke.
* @date : 16/10/07
* @method name : calculateCustomPreferredSizeFromData()
* @i/p params : -
* @return : Number
* @description : computes dropdown width according to what dataprovider provided to it.
public function calculateCustomPreferredSizeFromData():Number
var dropDownWidth:Number = this.calculatePreferredSizeFromData(this.dataProvider.length).width+14;
if(dropDownWidth > this.width)
return dropDownWidth;
else
return this.width;
]]>
</mx:Script>
</mx:ComboBox> -
fter installing 10.6.8 our printers are not working? When will this be fixed?
Which one?
Mine works perfectly.
Have you check the web site to see if there is a updated driver for it there?
Allan -
Fonts installed with windows are not listed in acrobat 8 professional
Fonts installed with windows are not listed in acrobat 8 pro, what do you need to do to make them availabe in the program
If you have Word installed, make a simple PDF from Word that has text set in Tahoma, then print to the 'Adobe PDF' printer. Open the PDF file you just created, then hit Ctrl-D. In the Fonts tab you will see what font the PDF file want to use and what font it actually uses.
-
Contribute Menu area Not Resizable
Hi I upgraded CS3 Web Premium to CS5.5 and Contribute 5 has a large area for the menu. Should just be two lines one for icons and one for File|Edit|View etc. But instead it takes up over 1/3 of my workspace. Is there anyway to fix this? I am unable to resize it no mouse area to click on to resize. Windows 7 OS also did a full uninstall deleted all Adobe folders in Program Files and User App.
Brian Hurley
IT ManagerActually it just fixed itself when I spoke with an Adobe Rep the problem
had gone away. Very strange.
Mit freundlichen Grüßen / With kind regards,
Brian S. Hurley
IT Manager
MAPAL Inc.
4032 Dove Road
Port Huron, Michigan 48060
Phone: 810.364.1574
Cell: 810.824.0908
Fax: 810.364.4750
Email: [email protected]
More than you might imagine?Unique solutions for your toughest process
needs
Visit us at www.mapal.us
From: Shilpa_ <[email protected]>
To: brihurley1968 <[email protected]>
Date: 11/16/2011 12:42 AM
Subject: Contribute Menu area Not
Resizable
Re: Contribute Menu area Not Resizable
created by Shilpa_ in Contribute General Discussion - View the full
discussion
Were there any other Adobe Apps installed, and signed in to CS Live
services. A silent update to CSService Manager would repair this issue.
Please refer http://kb2.adobe.com/cps/904/cpsid_90427.html for details
Hope this helps
~Shilpa
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4028648#4028648]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4028648#4028648]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Contribute General Discussion by email or at
Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746. -
I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time. How do I restore this facility? I am running a 64bit Windows 7 OS
Is the media files in question in the iTunes library or elsewhere on the computer?
-
PLEASE HELP
I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?Photobooth and iPhoto are two quite different apps with no connection between them. I'd try the Using Mac OS X forum for whatever version of the OS you have.
Maybe you are looking for
-
Difference in design and live view
I ran into another problem lately and i still cant find any solution to this yet. I have a table within table and they look fine in the design page but when i change the page to live view or switch to browser, the table seems longer. Any idea why an
-
Backing up apps and media from different devices to a mac
I have two different ios devices, each has different apps installed. Is there an easy way to sync and backup each device separately using a mac. (i.e. if I restore my tablet I don't want to have my iphone apps on my tablet ios device). Thanks
-
Content-Disposition inline Not working
Hi all, I am using Orion application server as Web server. I like to open a file in client side form the server. Which one is known MIME type. I don't want the IE to prompt the user for Save as/ Open from the current location. I am using "inline" arg
-
Adding a image in Web Intelligence Report
Post Author: palani007 CA Forum: Integrated Solutions hi, I am new to this forum, i am not sure whether i have asked the question to the right group our not. Here is my question, I have a situation where in i have to add a logo for each company based
-
Hello Im having a bit of bother with a extension that allows me to easily add files such as images, however updating the file doesnt work, There own support forums are practcaly non existant to ive had to wider my search to resolve this. I think some