Having both 10g and 11g database in single xp machine Not working

Hi everyone ,
I installed an oracle 10g database and it was working fine and i wanted to have an 11g database installed and so i did in a separate folder and it got installed successfully but all the net service of my 10g is not getting recognized and so i uninstall 11g and it worked fine and back to normal.
1. Can't i install both 10g and 11g in a database.
2. How can i have both them installed without issues in Windows XP SP3 32 bit.

Mo2 wrote:
I have 10G express installed on XP and I was planning to install 11G.
So what I learned from this thread:
-Yes it is possible to install 11g and 10G on the same xp machine.
-To use both version you must change few parameters every time.
so basically it is possible but not recommended. is that a fair description?
No that is not a fair description. It is possible and quite easily managed. But you do have to be aware of where you are. If you want to just pop in a CD, click 'install.exe', then click an icon to magicly connect to the correct database, then yeah, I'd say it's not recommended, but that says more about the user than the product ...
Of course, could go even further and say I don't think Windows should be recommended, period. I've worked with IBM mainframes (s-370, OS-VS, OS-MVS, VM, OS/x, etc.), DEC's vms, IBM OS/2, every version of Windows since it's birth, Solaris, AIX, HP-UX, and Red Hat Linux. Windows is the worst excuse for an OS of any of them.
If you are doing this on your on PC as a learning tool, I'd strongly suggest you
1) go to vmware.com and get a free copy of vmware player and install it on your pc
2) go to oracle.com and get free copy of Oracle Enterprise Linux and install that into a virtual machine under vmware player
3) go to oracle.com and get free copies of whatever oracle products you want and install them on that virtual linux machine.
By the way, I installed 11g on Vista machine and it is working fine but I uninstall 10G first on that machine.

Similar Messages

Info about Listener for oracle 10g and 11g installed on single systm

Hi,
I have installed oracle 10g n 11g on my system. I have question regarding oracle listener.
oracle 10g , Listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1521))
oracle 11g, Listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = kankala.kalyan)(PORT = 1522))
my question is why the listener's names are same even though thy are on different ports?
and for people worrying, why i have installed 10 n 11 is
Initally only oracle 11g was installed on my system. Later, I was learning forms for first time and i have to connect to database frm developer suite 10g. so i installed oracle 10g database.

The names are the same because that is the way you created them.
If you want to make a change use NETCA to drop and recreate one of them.
Just make sure you've defined ORACLE_HOME correctly before you do it.

Datapump network import from 10g to 11g database is not progressing

We have an 11.2.0.3 shell database in RedHat Linux 5 64-bit platform, and we are pulling data from its 10g database (10.2.0.4) HP-UX platform using datapump via NETWORK_LINK. However, the import seems to be not progressing and completing. We have left it run for almost 13 hours and did not even import a single row to the 11g database. We even try to import only one table with 0 rows but still it is not completing, the logfile just continue to be lopping on the following:
Worker 1 Status:
Process Name: DW00
State: EXECUTING
Estimate in progress using BLOCKS method...
Job: IMP_NONLONG4_5
Operation: IMPORT
Mode: TABLE
State: EXECUTING
Bytes Processed: 0
Current Parallelism: 1
Job Error Count: 0
Worker 1 Status:
Process Name: DW00
State: EXECUTING
We also see this:
EVENT SECONDS_IN_WAIT STATUS STATE ACTION
SQL*Net message from dblink 4408 ACTIVE WAITING IMP_NONLONG4_5
Below is our par file:
NETWORK_LINK=DATABASE_10G
DIRECTORY=MOS_UPGRADE_DUMPLOC1
LOGFILE=imp_nonlong_grp-4_5.log
STATUS=300
CONTENT=DATA_ONLY
JOB_NAME=IMP_NONLONG4_5
TABLES=SYSADM.TEST_TBL
Any ideas? Thanks.

Thanks a lot for all who have looked and responded to this, I appreciate you giving time for suggestions. As a recap, datapump export and import via dumpfile works on both 10g and 11g databases, we are only having issue pulling data from the 10g database by executing datapump network import (using dblink) from the 11g database.
SOLUTION: The culprit was the parameter optimizer_features_enable='8.1.7' that is currently set on the 10g database, we have taken that out of the parameter file of the 10g database and network import worked flawlessly.
HOW DID WE FIGURE OUT: We turned on a trace to the datapump sessions and trace file shows something about optimizer (see below). So we have taken one by one any parameter that has something to do with optimizer and found out it was optimizer_features_enable='8.1.7' parameter that when removed makes the network import successful.
SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS opt_param('parallel_execution_enabled',
'false') NO_PARALLEL(SAMPLESUB) NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE
*/ NVL(SUM(C1),0), NVL(SUM(C2),0), NVL(SUM(C3),0)
FROM
(SELECT /*+ NO_PARALLEL("SYS_IMPORT_TABLE_02") INDEX("SYS_IMPORT_TABLE_02"
SYS_C00638241) NO_PARALLEL_INDEX("SYS_IMPORT_TABLE_02") */ 1 AS C1, 1 AS C2,
1 AS C3 FROM "DBSCHEDUSER"."SYS_IMPORT_TABLE_02" "SYS_IMPORT_TABLE_02"
WHERE "SYS_IMPORT_TABLE_02"."PROCESS_ORDER"=:B1 AND ROWNUM <= 2500)
SAMPLESUB
SELECT /* OPT_DYN_SAMP */ /*+ ALL_ROWS IGNORE_WHERE_CLAUSE
NO_PARALLEL(SAMPLESUB) opt_param('parallel_execution_enabled', 'false')
NO_PARALLEL_INDEX(SAMPLESUB) NO_SQL_TUNE */ NVL(SUM(C1),0), NVL(SUM(C2),0)
FROM
(SELECT /*+ IGNORE_WHERE_CLAUSE NO_PARALLEL("SYS_IMPORT_TABLE_02")
FULL("SYS_IMPORT_TABLE_02") NO_PARALLEL_INDEX("SYS_IMPORT_TABLE_02") */ 1
AS C1, CASE WHEN "SYS_IMPORT_TABLE_02"."PROCESS_ORDER"=:B1 THEN 1 ELSE 0
END AS C2 FROM "DBSCHEDUSER"."SYS_IMPORT_TABLE_02" "SYS_IMPORT_TABLE_02")
SAMPLESUB

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Oracle 10g and 11g April PSU

Hi,
Can you please tell when Oracle releases April 2013 PSU for 10g and 11g databases?
Thanks,
...

Released last week.
*Patch Set Update and Critical Patch Update April 2013 Availability Document [ID 1525152.1]*

Issue with RN messages between 10g and 11g

Hi All,
We are facing some issues for RN messages;
We have configured Rosettanet Actions on both 10G and 11G . In 11G we have the RNTP (remote trading partner) in 10G we have host. The messages posted from host(10g) are not reaching the 11g remote TP, but failing due to the below errors;
<29-Aug-2012 14:47:07 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <B2B Label:PCBPEL_11.1.1.6.0_GENERIC_111
214.0600.1553: java.lang.NullPointerException
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:212)
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:582)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1919)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Could anyone help us on this issue?
Regards,
Raj

Hi Dheeraj ,
1. With Both 10G we are getting the below error with Rosettanent Exchange Protocol Version 01.10 :
Description: An unexpected error occurred during validation
StackTrace:
Error -: AIP-51505: General Validation Error: Error -: AIP-51505: General Validation Error: oracle.xml.parser.schema.XSDException
at oracle.tip.adapter.b2b.document.rn20.RNDocumentPlugin.processIncomingDocument(RNDocumentPlugin.java:163)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1927)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2617)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2487)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2442)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
However , when we changed the Exchange Protocol Version to V02.00 we got the below error :
Machine Info: (APT3VW03)
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error: Error -: AIP-50025: Repository error : Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "null", To party[NAME] "null", Business action name "RequestPurchaseOrderAction"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2006)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2617)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2487)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2442)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2. With both 11G Environments we are getting the below error (Exchange Protocol Version 01.10):
<05-Sep-2012 13:49:36 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <B2B Label:PCBPEL_11.1.1.6.0_GENERIC_111
214.0600.1553: java.lang.NullPointerException
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:212)
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:582)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1919)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3883)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
<05-Sep-2012 13:49:36 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <java.lang.NullPointerException
at oracle.tip.b2b.msgproc.DbAccess.insertMsgTblRowImpl(DbAccess.java:621)
at oracle.tip.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:524)
at oracle.tip.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:6241)
at oracle.tip.b2b.engine.Engine.handleInboundException(Engine.java:5130)
at oracle.tip.b2b.engine.Engine.handleExceptionBeforeIncomingTPA(Engine.java:5062)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1983)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3883)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Regards,
Raj

Oracle 10g and 11G on RHEL 6

Hi,
Is it fine to install oracle 10g and 11g on RHEL 6?
Please guide!!
thanks

Hi;
Is it fine to install oracle 10g and 11g on RHEL 6?Its not certified as mention. But if you want to make installation on that release see Tim's site:
http://www.oracle-base.com/blog/2011/02/13/oracle-11gr2-on-oracle-linux-6/
Regard
Helios

Difference between 10g and 11g OEM

Hi,
I would like to know what is the difference between 10g and 11g Grid control. Unfortunately I have worked only on 11g Grid Control. So do not not what exactly are the differences like from GUI features,installation steps.
Thank you....

Hi,
From 11g grid Weblogic also introduced. You can refer this below note for understanding even architecture.
*Understanding the Enterprise Manager 10g and 11g Grid Control Management Agent, Directory Structure and Key Configuration Files. [ID 234872.1]*

Having both fcs1 and fcs 2 in one machine

is it possible to have both fcs 1 and fcs 2 (which i bought recently) into 1 machine? meaning having both fcp5 and 6 at the same time.
if not how do i uninstall fcs1? is thereany uninstalling software that can make a clean uninstall (including library etc) and how would it effect the previous work files?
ragaeds

Welcome to the forum!
Having two versions of FCP on the same system isn't recommended by Apple. However, it does work if you create a dual boot system (one install per OS).
-DH

Difference in select for update of - in Oracle Database 10g and 11g

Hi, I found out that Oracle Database 10g and 11g treat the following PL/SQL block differently (I am using scott schema for convenience):
DECLARE
  v_ename bonus.ename%TYPE;
BEGIN
  SELECT b.ename
    INTO v_ename
    FROM bonus b
    JOIN emp e ON b.ename = e.ename
    JOIN dept d ON d.deptno = e.deptno
   WHERE b.ename = 'Scott'
     FOR UPDATE OF b.ename;
END;
/While in 10g (10.2) this code ends successfully (well NO_DATA_FOUND exception is raised but that is expected), in 11g (11.2) it raises exception "column ambiguously defined". And that is definitely not expected. It seems like it does not take into account table alias because I found out that when I change the column in FOR UPDATE OF e.empno (also does not work) to e.mgr (which is unique) it starts working. So is this some error in 11g? Any thoughts?
Edited by: Libor Nenadál on 29.4.2010 21:46
It seems that my question was answered here - http://stackoverflow.com/questions/2736426/difference-in-select-for-update-of-in-oracle-database-10g-and-11g

The behaviour seems like it really is a bug and can be avoided using non-ANSI syntax. (It makes me wonder why Oracle maintains two query languages while dumb me thinks that this is just a preprocessor matter and query engine could be the same).

Running Oracle database 10g and 11g on same 5 RAC nodes

Hello Gurus,
Could any body throw light if I can install and sucessfully run Oracle database 10g and 11g on the same Oracle RAC installation setup.My setup is below
Number of nodes-5
OS- windows 2003 or RHEL5
storage- DELL EMC SAN
Clusterware- oracle version11g
File system-Automatic storage management(ASM)
After I successfully setup clusterware,ASM on the nodes,I would want to install 11g database on all 5 nodes .
Then Install 10g database on only 3 of the nodes using the same clusterware.
What are your views on the same.
Also FYI... as per metalink node 220970.1(RAC: Frequently Asked Questions) one can do such a setup.
what iam looking for is practical experience if anyone has implemented this in production system,if yes any issues faced and how tough it is to support.
Thanks,
Imtiyaz

You could run an 11g database and 10g database on the same cluster as long as you use Clusterware 11g.
The administration aspect will drastically change according to the platform you run on. As of now, it appears you don't know whether it will be Linux or Windows.
It would be practical to support the same database release.

How to Install oracle 10g and 11g on aix 6.1

Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
Chetan
Edited by: chetan0926 on Jan 11, 2012 2:56 AM

Hi;
Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
I agree Sybrand, Please check installation guide. All your questions will be answered in it
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

I have created TM lock in oracle 9i and 11g databases. by using same query

here is the query uesd for finding a lock in database.
select /*+ RULE */ 'DATAPOINT # ' bpb,
l.sid, ' # ',
s.username, ' # ',
s.sql_address, ' # ',
x.sid, ' # ',
y.username, ' # ',
l.type, ' # ',
l.id1, ' # ',
l.id2, ' # ',
decode(X.LMODE,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
decode(L.REQUEST,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
from v$session s, v$lock l, v$lock x, v$session y
where l.ctime > 120
and s.lockwait = l.kaddr
and l.type in ('TM', 'TX', 'UL')
and l.id1 = x.id1
and l.id2 = x.id2
and x.sid != l.sid
and x.sid = y.sid
and x.lmode >0;
after doing further investigation i found that for 11g condition s.lockwait = l.kaddr not satisfied where as for 9i it's gives correct results
here are the lockwait and kaddr values for 9i and 11g databases.
for oracle 9i
SQL> select lockwait from v$session where sid in (10,12);
LOCKWAIT
67B4E10C
SQL> select kaddr from v$lock where sid in (10,12);
KADDR
67B4E088
67B4E10C
for oracle 11g
SQL> select lockwait from v$session where sid in (70,134);
LOCKWAIT
070000002FA080D8
SQL> select kaddr from v$lock where sid in (70,134);
KADDR
0700000030C595C0
0700000030C59830
00000001108E3E58
00000001108E3E58
070000002FA6CB30
SQL>
please advise if there is any change for calculations for lockwait,kaddr for 11g.

can you post your query with explain plan for both 9i version and 10g version.
Thanks,
karthick.

Resuming the REDO APPLY : 10g and 11g Differences

Versions > 10.2, 11.2
OS > Solaris
I have a question on step4 below.
Both in 10g and 11g versions, for a Physical Standby DB, you
Step1.
Mount the DB using
startup nomount;
alter database mount ;Step2. Start the REDO Apply using
alter database recover managed standby database disconnect from session;Step3. Open the standby DB using
recover managed standby database cancel; -- stop the redo apply
alter database open ;
Step4. Resuming the REDO APPLY
alter database recover managed standby database using current logfile disconnect ;At this point (after step4 ), for 10.2 version, the standby DB goes back to mount mode , but the 11.2 DB remains open for READ ONLY queries because of ACTIVE DATAGUARD feature. Am I right ?

Yes, you are right.
In 10g, there is no option of active dataguard (redo applying is not possible when the database is opened). Redo applying is possible only when the standby database is in mount stage. When the database is opened in read only mode, the archive applying is not possible. In order to run queries on database tables, in a physical standby database, one had to stop the log apply and open the database in read-only mode. This means that the log files are being queued up during that period and will have to be applied once the database is reverted to the managed recovery mode.
In 11g, this is not the case. It allows users to have read-only access to the physical standby databases. This option gives customers the flexibility to run queries to the physical standby database, while the log shipping and apply continues its work.The archive applying can be done even when the database is opened in read only mode. This option is known as Active Dataguard (Oracle High Availability). For this, the steps you have mentioned are perfect. This is the advantage in 11g.

10g and 11g installation problem on Vista Business version

Hi Everyone
I could not get either 10g or 11g database install in my vista business version.
11g Oracle universal installer was running, but many button does not work, like the folder browser and at some stage the program just terminate itself.
10g gave me a total green screen during the universal installer, the window taskbar showed the installer was running.
someone said it is the jre problem but i dont know how to fix it anyway. I tried to remove or update jre in my computer, but nothing get better.
My window has the newest updates. below are the database files i was using from oracle.
11g - win32_11gR1_database_1013.zip
10g - 10203_vista_w2k8_x86_production_db.zip
Could someone help me please, thank you.
Bryan

Please consider opening this as a completely separate question rather than a continuation of an existing, but not quite related, question.
The reasons include:
- each user sees a summary page which reveals the topic of the first question asked - yours is now buried;
- others may wish to contribuite to the original and you have now side-tracked (if not completely derailed) it
- you are able to assign helpfulness points of your own which encourages some to participate in YOUR issue
- it is consideredd normal courtesy in forums

Having both 10g and 11g database in single xp machine Not working

Similar Messages

Maybe you are looking for