Having error while customizing CA51

hi there all,
i need to change the output format of the CA51 report, which is to transfer them in to excell format.
but the when i copy the codes from the standrad program and paste it in the customized program,
i find there is an error which saying
program ZRCPDRK00
field "pn_plnty is unknown.
is there any one can help me,
thank you.

Hi,
Make a copy of cache-server.sh and name it coherence_new.sh and update the following:
- Change com.tangosol.net.DefaultCacheServer to com.tangosol.net.CacheFactory
- Add the -Dtangosol.coherence.distributed.localstorage=false to the JAVA_OPTS
Run the coherence_new.sh and if it works then it might be a typo in the coherence.sh but you can use coherence_new.sh and it will work the same way.
Hope this helps!
Cheers,
NJ

Similar Messages

Error while customizing ESS webdynpro

Hi All,
I am customizing an ESS web dynpro application. In order to accomplish this I am modifying one of the components that belong to a particular track. When i select one of the components to create a project, I get the following error:
Error while creating a project
java.lang.reflect.InvocationTargetException
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:87)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Caused by: org.eclipse.core.internal.resources.ResourceException: Could not save master table.
at org.eclipse.core.internal.resources.SaveManager.saveMasterTable(SaveManager.java:805)
at org.eclipse.core.internal.resources.SaveManager.saveMasterTable(SaveManager.java:790)
at org.eclipse.core.internal.resources.SaveManager.save(SaveManager.java:1322)
at org.eclipse.core.internal.resources.SaveManager.snapshotIfNeeded(SaveManager.java:909)
at org.eclipse.core.internal.resources.Workspace.endOperation(Workspace.java:896)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1600)
at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
... 1 more
Any idea why the project is not getting created for the component. Any help would be greatly appreciated.
Thanks,
Tom

Hi,
please do the following check:
1. Enter the following URL in your web browser:
http://<server>:<port>/AdobeDocumentServices/Config
where <server> is the name of the J2EE engine where the Adobe document services are installed and <port> is the port of the J2EE engine.
Note that the entries in the URL are case-sensitive.
2. The web page of the web service AdobeDocumentServices is displayed. Choose Test.
3. Choose rpdata(test.) .
4. Choose the Send button without entering any parameters.
5. Enter the user name and password as given in the configuration steps(as in configuration guide- User:ADSUser) .
6. Choose Submit.
If the configuration is correct, you get the information about the Version number in the response area.
Please confirm the ADS version and WAS information.
thanks,
kris

I am having error while viewing rules of Engagement post.

HI Team,
I am getting an error while trying to access Rules of SCN Engagement Post
Can you help me in resolving it.
Thanks,

This has been fixed. The document is visible again.

Hi there Gurus having problem with customizing CA51

hi there Gurus,
i was required to customize the CA51 program .
i try to copy the program , but i'm facing alot of errors.
(customized)
Program ZRCPDRK00
Field "PN_PLNTY" is unknown. It is neither in one of the specified
tables nor defined by a "DATA" statement.
the actual program is RCPDRK00 looks fine,
please advice me regarding this,
i even try to define the pn_plnty in the data statement, but still encounter this error.
please give me some solutions.
thank you

Look in the MIDI event list (key: E) for volume messages (control nr 7) and delete those. If it keeps happening after that, unplug your MIDI controller(s). Chances are there's a wonky volume slider on it that sends a MIDI message any time you hit your keys vigorously...

BDOC error while customer activation in MDG

Hi,
We are using CRM integration scenario. MDG customer change request is getting triggered from CRM. During final activation we are getting this BDOC error 'UPD_IN_MI_BACK1 00505630006D1ED3B6E812B2E35D2E29TEL007AD_DEFAULT99 TEL007AD_HOME 9999123123595920140514000000X XXXXXXI'. We have referred the note 1240916 but couldn't point out anything. There is one more correction note 1076996 whose corrections are not in our system. If someone faced the same problem please help.
Thanks in Advance,
Jitendra

I am facing similar problem in the 0FIAP_O03 ODS.
One particular value 'CC ·µÐ¼þ' for field 0REF_DOC_NO gives error in Activation.0REF_DOC_NUM does not have any masterdata but the SID table is exists. We have ALL_CAPITAL in RSKC.
One strage observation was when I tried loading this value[value copied from the error message in a PSA] in Developement Box it was successfull.
I Do not understand if I am missing some setting in Production.
The Errors are
BRAIN 60 Value 'CC ·µÐ¼þ' (hex. '434320B7B5D0ADBCFE') of characteristic 0REF_DOC_NO contains invalid charact
RSDRO 303 Error when assigning SID (details in long text)
The SID did not get created in Prod but was created in Dev. ODS is available for reporting and it has to remain such.
If you have any Insights please help me as well.

Having error while running coherence.sh

I'm running wls 10.3.5 with coherence 3.6 on linux SUSE.
According to the Coherence Developer guide, it stated that after updating the cache-server.sh with the following settings, apply the same settings in coherence.sh.
set java_opts="-Xms%memory% -Xmx%memory% -Dtangosol.coherence.cluster=cluster_
name -Dtangosol.coherence.clusterport=port"
After that, kick of the cache-server.sh and run 2 instances of the coherence.sh, however, i'm receiving the following error when i tried to run the coherence.sh
Map (?): resetting reader due to java.io.IOException: Bad file descriptor

Hi,
Make a copy of cache-server.sh and name it coherence_new.sh and update the following:
- Change com.tangosol.net.DefaultCacheServer to com.tangosol.net.CacheFactory
- Add the -Dtangosol.coherence.distributed.localstorage=false to the JAVA_OPTS
Run the coherence_new.sh and if it works then it might be a typo in the coherence.sh but you can use coherence_new.sh and it will work the same way.
Hope this helps!
Cheers,
NJ

SAP Enterprise Portal 7.0 Error while customizing Standard Admin roles.

Hi All,
I have a business requirement of Creating Transport role which should access only Transport Navigational Tab in Enterprise Portal 7.0.
Because we can't give Standard Administrator roles to Users.
For that, I have created a role and added Standard System admin role as role to role and i hide the Navigational tabs except Tranport Tab (by changing Properties of ''Invisible in Navigational areas of System Admin role'')
I have assigned this role to a user. and i have also given read/write permission to folders and in security zones. Export is working o.k and when i click on browse tab in import it is showing-->>
"Unexpected error. Check the log files for details."
I have checked logfiles and i didn't find any thing.
Any ideas??
Your early response would be highly appreciated.
Thanks in advance,
Khasim.

Hello Khasim,
                    My name is Mohammed and I am talking from chicago. I am facing problem in EP 6.0 Authorization.
First of explain me what is Security Zone. why it is used
   I have created one new role and added system admin role(inbuild role) into new role. Is that possible to restrict all portal content folder. I want to show only centain folder and other foldr should be invisible or not able to see.
Example
              New Role
                          added system admin role
When user login and he should be only see his folder in portal content not others folder. So if you have solution or detail explaination please send me info to mtajamulatgmail.com or call me 7735010306
Thanks
Mohammed

I having error, while staring Xampp Apache server. This is error log which I have. Please help me through this.

[Tue Jan 13 09:20:24.754998 2015] [ssl:warn] [pid 7516:tid 384] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
[Tue Jan 13 09:20:24.833126 2015] [core:warn] [pid 7516:tid 384] AH00098: pid file C:/xampp/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run?
[Tue Jan 13 09:20:24.989377 2015] [ssl:warn] [pid 7516:tid 384] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
[Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00455: Apache/2.4.10 (Win32) OpenSSL/1.0.1i PHP/5.5.19 configured -- resuming normal operations
[Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00456: Apache Lounge VC11 Server built: Jul 17 2014 11:50:08
[Tue Jan 13 09:20:25.051877 2015] [core:notice] [pid 7516:tid 384] AH00094: Command line: 'c:\\xampp\\apache\\bin\\httpd.exe -d C:/xampp/apache'
[Tue Jan 13 09:20:25.051877 2015] [mpm_winnt:notice] [pid 7516:tid 384] AH00418: Parent: Created child process 6284
[Tue Jan 13 09:20:25.786255 2015] [ssl:warn] [pid 6284:tid 392] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
[Tue Jan 13 09:20:26.129998 2015] [ssl:warn] [pid 6284:tid 392] AH01909: www.example.com:443:0 server certificate does NOT include an ID which matches the server name
[Tue Jan 13 09:20:26.176874 2015] [mpm_winnt:notice] [pid 6284:tid 392] AH00354: Child: Starting 150 worker threads.

ok thanks

Error while creating new projects using api

Hello,
I am having error while creating projects using standard api, PA_PROJECT_PUB.CREATE_PROJECTS. The error I am having is as follow.
Source template ID is invalid.
===
My code is as follow:
SET SERVEROUTPUT ON SIZE 1000000
SET VERIFY OFF
define no=&amg_number
DECLARE
-- Variables used to initialize the session
l_user_id NUMBER;
l_responsibility_id NUMBER;
cursor get_key_members is
select person_id, project_role_type, rownum
from pa_project_players
where project_id = 1;
-- Counter variables
a NUMBER := 0;
m NUMBER := 0;
-- Variables needed for API standard parameters
l_commit VARCHAR2(1) := 'F';
l_init_msg_list VARCHAR2(1) := 'T';
l_api_version_number NUMBER :=1.0;
l_return_status VARCHAR2(1);
l_msg_count NUMBER;
l_msg_data VARCHAR2(2000);
-- Variables used specifically in error message retrieval
l_encoded VARCHAR2(1) := 'F';
l_data VARCHAR2(2000);
l_msg_index NUMBER;
l_msg_index_out NUMBER;
-- Variables needed for Oracle Project specific parameters
-- Input variables
l_pm_product_code VARCHAR2(30);
l_project_in pa_project_pub.project_in_rec_type;
l_key_members pa_project_pub.project_role_tbl_type;
l_class_categories pa_project_pub.class_category_tbl_type;
l_tasks_in pa_project_pub.task_in_tbl_type;
-- Record variables for loading table variables above
l_key_member_rec pa_project_pub.project_role_rec_type;
l_class_category_rec pa_project_pub.class_category_rec_type;
l_task_rec pa_project_pub.task_in_rec_type;
-- Output variables
l_workflow_started VARCHAR2(100);
l_project_out pa_project_pub.project_out_rec_type;
l_tasks_out pa_project_pub.task_out_tbl_type;
-- Exception to call messag handlers if API returns an error.
API_ERROR EXCEPTION;
BEGIN
-- Initialize the session with my user id and Projects, Vision Serves (USA0
-- responsibility:
select user_id into l_user_id
from fnd_user
where user_name = 'SSHAH';
select responsibility_id into l_responsibility_id
from fnd_responsibility_tl
where responsibility_name = 'Projects Implementation Superuser';
pa_interface_utils_pub.set_global_info(
p_api_version_number => l_api_version_number,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status);
if l_return_status != 'S' then
raise API_ERROR;
end if;
-- Provide values for input variables
-- L_PM_PRODUCT_CODE: These are stored in pa_lookups and can be defined
-- by the user. In this case we select a pre-defined one.
select lookup_code into l_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Conversion';
-- L_PROJECT_IN: We have to provide values for all required elements
-- of this record (see p 5-13, 5-14 for the definition of the record).
-- Customers will normally select this information from some external
-- source
l_project_in.pm_project_reference := 'AGL-AMG Project &no';
l_project_in.project_name := 'AGL-AMG Project &no';
l_project_in.created_from_project_id := 1;
l_project_in.carrying_out_organization_id := 2864; /*Cons. West*/
l_project_in.project_status_code := 'UNAPPROVED';
l_project_in.start_date := '01-JAN-11';
l_project_in.completion_date := '31-DEC-11';
l_project_in.description := 'Trying Hard';
l_project_in.project_relationship_code := 'Primary';
-- L_KEY_MEMBERS: To load the key member table we load individual
-- key member records and assign them to the key member table. In
-- the example below I am selecting all of the key member setup
-- from an existing project with 4 key members ('EE-Proj-01'):
for km in get_key_members loop
-- Get the next record and load into key members record:
l_key_member_rec.person_id := km.person_id;
l_key_member_rec.project_role_type := km.project_role_type;
-- Assign this record to the table (array)
l_key_members(km.rownum) := l_key_member_rec;
end loop;
-- L_CLASS_CATEGORIES: commented out below should fix the error we get
-- because the template does not have an assigment for the mandatory class
-- 'BAS Test'
l_class_category_rec.class_category := 'Product';
l_class_category_rec.class_code := 'Non-classified';
-- Assign the record to the table (array)
l_class_categories(1) := l_class_category_rec;
-- L_TASKS_IN: We will load in a single task and a subtask providing only
-- the basic fields (see pp. 5-16,5-17,5-18 for the definition of
-- the task record)
l_task_rec.pm_task_reference := '1';
l_task_rec.pa_task_number := '1';
l_task_rec.task_name := 'Construction';
l_task_rec.pm_parent_task_reference := '' ;
l_task_rec.task_description := 'Plant function';
-- Assign the top task to the table.
l_taskS_in(1) := l_task_rec;
-- Assign values for the sub task
l_task_rec.pm_task_reference := '1.1';
l_task_rec.pa_task_number := '1.1';
l_task_rec.task_name := 'Brick laying';
l_task_rec.pm_parent_task_reference := '1' ;
l_task_rec.task_description := 'Plant building';
-- Assign the subtask to the task table.
l_tasks_in(2) := l_task_rec;
-- All inputs are assigned, so call the API:
pa_project_pub.create_project
(p_api_version_number => l_api_version_number,
p_commit => l_commit,
p_init_msg_list => l_init_msg_list,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_workflow_started => l_workflow_started,
p_pm_product_code => l_pm_product_code,
p_project_in => l_project_in,
p_project_out => l_project_out,
p_key_members => l_key_members,
p_class_categories => l_class_categories,
p_tasks_in => l_tasks_in,
p_tasks_out => l_tasks_out);
-- Check the return status, if it is not success, then raise message handling
-- exception.
IF l_return_status != 'S' THEN
dbms_output.put_line('Msg_count: '||to_char(l_msg_count));
dbms_output.put_line('Error: ret status: '||l_return_status);
RAISE API_ERROR;
END IF;
-- perform manual commit since p_commit was set to False.
COMMIT;
--HANDLE EXCEPTIONS
EXCEPTION
WHEN API_ERROR THEN
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
WHEN OTHERS THEN
dbms_output.put_line('Error: '||sqlerrm);
FOR i IN 1..l_msg_count LOOP
pa_interface_utils_pub.get_messages(
p_msg_count => l_msg_count,
p_encoded => l_encoded,
p_msg_index => i,
p_msg_data => l_msg_data,
p_data => l_data,
p_msg_index_out => l_msg_index_out);
dbms_output.put_line('ERROR: '||to_char(l_msg_index_out)||': '||l_data);
END LOOP;
rollback;
END;
===
Msg_count: 1
Error: ret status: E
ERROR: 1: Project: 'AGL-AMG Project 1123'
Source template ID is invalid.
PL/SQL procedure successfully completed.

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Getting error while converting xml to xsd

I am getting error"The table (citeinfo) cannot be the child table to itself in nested relations"
at "http://www.flame-ware.com/products/xml-2-xsd/Default.aspx", while converting
xml into xsd so i can register.
Wherever citeinfo is there it is giving error.
Please look at bold and suggest solution
thank you
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE metadata SYSTEM "http://www.fgdc.gov/metadata/fgdc-std-001-1998.dtd">
<metadata>
<idinfo>
<citation>
*<citeinfo>(1)*<origin>MRF</origin>
<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<title>BAS_EASEMENT</title>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>One</sername>
<issue>One</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
<lworkcit>
*<citeinfo>(2)*<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>One</sername>
<issue>One</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
*</citeinfo>(2)*</lworkcit>
*</citeinfo>(1)*</citation>
<descript>
<abstract>Easement</abstract>
<purpose>E911 System</purpose>
<supplinf>None</supplinf>
</descript>
<timeperd>
<timeinfo>
<sngdate>
<caldate>20040512</caldate>
<time>09000000</time>
</sngdate>
</timeinfo>
<current>publication date</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>As needed</update>
</status>
<spdom>
<bounding>
<westbc>
-122.339</westbc>
<eastbc>
-121.0716</eastbc>
<northbc>
37.4900</northbc>
<southbc>
36.9086</southbc>
</bounding>
</spdom>
<keywords>
<theme>
<themekt>Easement</themekt>
<themekey>Easement</themekey>
</theme>
<place>
<placekt>San Jose</placekt>
<placekey>San Jose</placekey>
</place>
<stratum>
<stratkt>None</stratkt>
<stratkey>None</stratkey>
</stratum>
<temporal>
<tempkt>None</tempkt>
<tempkey>None</tempkey>
</temporal>
</keywords>
<accconst>None</accconst>
<useconst>None</useconst>
<ptcontac>
<cntinfo>
<cntperp>
<cntper>Earl Harris</cntper>
<cntorg>City of San Jose</cntorg>
</cntperp>
<cntpos>Project Manager</cntpos>
<cntaddr>
<addrtype>Actual Address</addrtype>
<address>801 N 1 ST</address>
<city>San Jose</city>
<state>CA</state>
<postal>90000</postal>
<country>USA</country>
</cntaddr>
<cntvoice>408.277.5626</cntvoice>
<cnttdd>408.277.5626</cnttdd>
<cntfax>408.298.8382</cntfax>
<cntemail>[email protected]</cntemail>
<hours>9-5</hours>
<cntinst>None</cntinst>
</cntinfo>
</ptcontac>
<browse>
<browsen>None</browsen>
<browsed>None</browsed>
<browset>None</browset>
</browse>
<datacred>Unknown</datacred>
<secinfo>
<secsys>FGDC</secsys>
<secclass>Confidential</secclass>
<sechandl>Confidential Information</sechandl>
</secinfo>
<native>Microsoft Windows NT Version 4.0 (Build 1381) Service Pack 6; ESRI ArcCatalog 8.3.0.800</native>
<crossref>
*<citeinfo>(3)*<origin>MRF</origin>
<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<title>BAS_EASEMENT</title>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>one</sername>
<issue>one</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
<lworkcit>
*<citeinfo>(*4)
<origin>MRF</origin>
<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<title>BAS_EASEMENT</title>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>one</sername>
<issue>one</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
*</citeinfo>(*3)
</lworkcit>
*</citeinfo*>(4)
</crossref>
</idinfo>
<dataqual>
<attracc>
<attraccr>All the related attributes are populated 100%.</attraccr>
<qattracc>
<attraccv>100%</attraccv>
<attracce>All the related attributes are populated 100%.</attracce>
</qattracc>
</attracc>
<logic>100% adjusted,modified and captured easements.</logic>
<complete>100%</complete>
<posacc>
<horizpa>
<horizpar>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpar>
<qhorizpa>
<horizpav>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpav>
<horizpae>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpae>
</qhorizpa>
</horizpa>
<vertacc>
<vertaccr>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccr>
<qvertpa>
<vertaccv>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccv>
<vertacce>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertacce>
</qvertpa>
</vertacc>
</posacc>
<lineage>
<srcinfo>
<srccite>
<*citeinfo>(5)*<origin>MRF</origin>
<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<title>BAS_EASEMENT</title>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>one</sername>
<issue>one</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
<lworkcit>
*</citeinfo>(5*)*<citeinfo>(6)*
<origin>MRF</origin>
<pubdate>20040512</pubdate>
<pubtime>09000000</pubtime>
<title>BAS_EASEMENT</title>
<edition>1</edition>
<geoform>vector digital data</geoform>
<serinfo>
<sername>one</sername>
<issue>one</issue>
</serinfo>
<pubinfo>
<pubplace>San Jose</pubplace>
<publish>CITY</publish>
</pubinfo>
<othercit>None</othercit>
<onlink>www.mrf.com</onlink>
*</citeinfo>(5)*
</lworkcit>
*</citeinfo>(6)*
</srccite>
<srcscale>24000</srcscale>
<typesrc>FTP</typesrc>
<srctime>
<timeinfo>
<sngdate>
<caldate>20040512</caldate>
<time>09000000</time>
</sngdate>
</timeinfo>
<srccurr>publication date</srccurr>
</srctime>
<srccitea>Unknown</srccitea>
<srccontr>MGE dgn contains easement data.</srccontr>
</srcinfo>
<procstep>
<procdesc>Easement data is reprojected from NAD27 to NAD83.
Further it is adjusted as per the spatial alignment shown in MGE input dgn.</procdesc>
<srcused>Easement</srcused>
<procdate>20040512</procdate>
<proctime>09000000</proctime>
<srcprod>BAS_EASEMENT</srcprod>
<proccont>
<cntinfo>
<cntperp>
<cntper>Mahesh P Choudhury</cntper>
<cntorg>Rolta International Inc.</cntorg>
</cntperp>
<cntpos>Project Manager</cntpos>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>5865 North Point Parkway</address>
<city>Alpharetta</city>
<state>GA</state>
<postal>30022</postal>
<country>USA</country>
</cntaddr>
<cntvoice>678.942.5015</cntvoice>
<cnttdd>678.942.5015</cnttdd>
<cntfax>678.942.5001</cntfax>
<cntemail>[email protected]</cntemail>
<hours>8-5</hours>
<cntinst>None</cntinst>
</cntinfo>
</proccont>
</procstep>
</lineage>
<cloud>Unknown</cloud>
</dataqual>
<spdoinfo>
<indspref>unknown</indspref>
<direct>Vector</direct>
<ptvctinf>
<sdtsterm>
<sdtstype>String</sdtstype>
<ptvctcnt>2203</ptvctcnt>
</sdtsterm>
</ptvctinf>
</spdoinfo>
<spref>
<horizsys>
<geograph>
<latres>5.5</latres>
<longres>5.5</longres>
<geogunit>Decimal degrees</geogunit>
</geograph>
<geodetic>
<horizdn>North American Datum of 1983</horizdn>
<ellips>Geodetic Reference System 80</ellips>
<semiaxis>1</semiaxis>
<denflat>2</denflat>
</geodetic>
</horizsys>
<vertdef>
<altsys>
<altdatum>North American Vertical Datum of 1988</altdatum>
<altres>0.002</altres>
<altunits>sf</altunits>
<altenc>Attribute values</altenc>
</altsys>
<depthsys>
</depthsys>
</vertdef>
</spref>
<eainfo>
<detailed>
<enttyp>
<enttypl>
BAS_EASEMENT</enttypl>
<enttypd>Contains geometry and attributes for easement segments</enttypd>
<enttypds>Data Model Dictionary</enttypds>
</enttyp>
<attr>
<attrlabl>BAS_EASEMENT_ID</attrlabl>
<attrdef>Migrated from STREET table ID column. After all the existing IDs have been migrated, assign ID #70,001 onwards for the new easement (or what ever # is available sequentially using, street centerline #) ID's.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>SURVEY_LENGTH</attrlabl>
<attrdef>Actual length of easement (international foot).This DOES take into account the State Plane Coordinate System.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Surveyed segment length</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>ROW_WIDTH</attrlabl>
<attrdef>Width of right-of-way (international feet)</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Right-of-way width</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Updated from ROW files</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>FROM_EASEMENT_ID</attrlabl>
<attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>IDs of an easement to which FROM side of this easement is connected.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>FROM_STREET_ID</attrlabl>
<attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>IDs of an street segment to which FROM side of this easement is connected.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>TO_EASEMENT_ID</attrlabl>
<attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>IDs of an easement to which TO side of this easement is closely located.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>TO_STREET_ID</attrlabl>
<attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>IDs of an street segment to which TO side of this easement is closely located.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>OTH_PROCESSING_STATUS_ID</attrlabl>
<attrdef>ID of the status/result of last run batch job.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Migrated from PLAN_1 in MGE tables and GIS_TRACKING.MDB Access Database</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>MUNICIPALITY_NAME</attrlabl>
<attrdef>Name of municipality in which the easement primarily resides.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<codesetd>
<codesetn>MUNICIPALITY_NAME_DOMAIN</codesetn>
<codesets>Data Model Dictionary</codesets>
</codesetd>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Updated using Municipal boundary source data.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>RECORD_DRAWING_FLAG</attrlabl>
<attrdef>Engineering plan that has been accepted by the City of San Jose (Y or N).</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>USERNAME who last modified this record</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Updated using source data.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>ACQUISITION_DATE</attrlabl>
<attrdef>Official date engineering plan accepted by the City of San Jose on this date</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Date/Time stamp of last record modification</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Updated using source data.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>GEO_MOD_DATE</attrlabl>
<attrdef>Time stamp when GEOMETRY column was last modified.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Time stamp when GEOMETRY column was last modified.</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Data modified date.</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>GDO_GEOMETRY</attrlabl>
<attrdef>Contains spatial data with true arc geometry.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Oracle Spatial Geometry Data - True Arcs</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>MAN_OVERRIDE</attrlabl>
<attrdef>This flag is 'N' by default. If this flag is set to 'Y' no unattended batch process will touch it ever again.</attrdef>
<attrdefs>Data Model Dictionary</attrdefs>
<attrdomv>
<udom>Flag set for batch process</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>MESSAGE</attrlabl>
<attrdef>Message from automated batch process to operator; can be "OK", or error message, or "to be checked", etc.</attrdef>
<attrdefs>data model dictionary</attrdefs>
<attrdomv>
<udom>GDO_GEOMETRY.LEN</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>OTH_PLAN_CREATED</attrlabl>
<attrdef>PLAN_1 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_CREATED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present.</attrdef>
<attrdefs>Data Dictionary</attrdefs>
<attrdomv>
<codesetd>
<codesetn>OTH_PLAN_DOMAIN</codesetn>
<codesets>data model dictionary</codesets>
</codesetd>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>OTH_PLAN_MODIFIED</attrlabl>
<attrdef>PLAN_2 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_MODIFIED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present</attrdef>
<attrdefs>Data dictionary</attrdefs>
<attrdomv>
<codesetd>
<codesetn>OTH_PLAN_DOMAIN</codesetn>
<codesets>data model dictionary</codesets>
</codesetd>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>LINEAGE_ID</attrlabl>
<attrdef>Artificial Numeric Identifier; Assigned to any graphical object; Unique throughout the system. Shared among tables. This column would also be used by EDL Administrator for lineage.</attrdef>
<attrdefs>Data dictionary</attrdefs>
<attrdomv>
<udom>Artificial Numeric Identifier</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
<attr>
<attrlabl>GDO_GEOMETRY.LEN</attrlabl>
<attrdef>Created default</attrdef>
<attrdefs>Data model</attrdefs>
<attrdomv>
<udom>unknown</udom>
</attrdomv>
<begdatea>20040512</begdatea>
<enddatea>20040512</enddatea>
<attrvai>
<attrva>100</attrva>
<attrvae>Unknown</attrvae>
</attrvai>
<attrmfrq>As needed</attrmfrq>
</attr>
</detailed>
<overview>
<eaover>Populated using MRF Tools</eaover>
<eadetcit>Various sources</eadetcit>
</overview>
</eainfo>
<distinfo>
<distrib>
<cntinfo>
<cntperp>
<cntper>Earl Harris</cntper>
<cntorg>City of San Jose</cntorg>
</cntperp>
<cntpos>Project Manager</cntpos>
<cntaddr>
<addrtype>Actual Address</addrtype>
<address>801 N 1 ST</address>
<city>San Jose</city>
<state>CA</state>
<postal>90000</postal>
<country>USA</country>
</cntaddr>
<cntvoice>408.277.5626</cntvoice>
<cnttdd>408.277.5626</cnttdd>
<cntfax>408.298.8382</cntfax>
<cntemail>[email protected]</cntemail>
<hours>9-5</hours>
<cntinst>None</cntinst>
</cntinfo>
</distrib>
<resdesc>Unknown</resdesc>
<distliab>Unknown</distliab>
<stdorder>
<digform>
<digtinfo>
<formname>GM Pro Access</formname>
<formvern>5.1</formvern>
<formspec>GM Pro 5.1</formspec>
<formcont>Easement data</formcont>
<filedec>no compression applied</filedec>
<transize>60</transize>
</digtinfo>
<digtopt>
<onlinopt>
<computer>
<networka>
<networkr>FTP</networkr>
</networka>
</computer>
<accinstr>FTP</accinstr>
<oncomp>FTP server</oncomp>
</onlinopt>
<offoptn>
<offmedia>None</offmedia>
<reccap>
<recden>1</recden>
<recdenu>None</recdenu>
</reccap>
<recfmt>None</recfmt>
<compat>None</compat>
</offoptn>
</digtopt>
</digform>
<fees>Unknown</fees>
<ordering>Unknown</ordering>
<turnarnd>Unknown</turnarnd>
</stdorder>
<custom>Unknown</custom>
<techpreq>Unknown</techpreq>
<availabl>
<timeinfo>
<sngdate>
<caldate>20040512</caldate>
<time>09000000</time>
</sngdate>
</timeinfo>
</availabl>
</distinfo>
<metainfo>
<metd>20040512</metd>
<metrd>20040512</metrd>
<metfrd>20040519</metfrd>
<metc>
<cntinfo>
<cntperp>
<cntper>Mahesh P Choudhury</cntper>
<cntorg>Rolta International Inc</cntorg>
</cntperp>
<cntpos>Project Manager</cntpos>
<cntaddr>
<addrtype>mailing address</addrtype>
<address>5865 North Point Parkway</address>
<city>Alpharetta</city>
<state>GA</state>
<postal>30022</postal>
<country>USA</country>
</cntaddr>
<cntvoice>678.942.5015</cntvoice>
<cnttdd>678.942.5015</cnttdd>
<cntfax>678.942.5001</cntfax>
<cntemail>[email protected]</cntemail>
<hours>8-5</hours>
<cntinst>None</cntinst>
</cntinfo>
</metc>
<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv>FGDC-STD-001-1998</metstdv>
<mettc>local time</mettc>
<metac>Unknown</metac>
<metuc>Unknown</metuc>
<metsi>
<metscs>Unknown</metscs>
<metsc>Confidential</metsc>
<metshd>Unknown</metshd>
</metsi>
<metextns>
<onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
<metprof>ESRI Metadata Profile</metprof>
</metextns>
</metainfo>
</metadata>

I am having error while registering as undefined element for citeinfo, timeinfo and cntinfo as shown below
Please could you help me solve.
thanks
</xs:appinfo>
          </xs:annotation>
</xs:element>
<xs:complexType name="citationType">
<xs:sequence>
*<xs:element ref="citeinfo"/>*
</xs:sequence>
</xs:complexType>
SQL> BEGIN
2 DBMS_XMLSCHEMA.registerSchema(
3 SCHEMAURL => 'fgdc-std-001-1998-sect011.xsd',
4 SCHEMADOC => bfilename('XMLDIR','fgdc-std-001-1998-sect011.xsd'),
5 CSID => nls_charset_id('UTF8'));
6 END;
7 /
BEGIN
ERROR at line 1:
ORA-31154: invalid XML document
ORA-19202: Error occurred in XML processing
LSX-00021: undefined element "citeinfo"
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 61
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 126
ORA-06512: at line 2
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:complexType name="timeperdType">
<xs:sequence>
*<xs:element ref="timeinfo"/>     *
<xs:element ref="current"/>
</xs:sequence>
</xs:complexType>
<xs:element name="current" type="currentType">
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:complexType name="ptcontacType">
<xs:sequence>
*<xs:element ref="cntinfo"/>     *
</xs:sequence>
     </xs:complexType>
<xs:element name="browse" type="browseType">
<xs:annotation>

Error while clonning Oracle app 11i

Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
     "d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
     at java.lang.reflect.Constructor.newInstance(Native Method)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
     at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
Hassan

Dear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan

Error while calling Receipt Un-application :Customer Transaction Identifier has taken a precedence over the transaction number

Hi All,
While calling the receipt Un-application API, I am getting a error like' Customer Transaction Identifier has taken a precedence over the transaction number'
Kindly suggest as to how can I troubleshoot this?
Appreciate your valuable Inputss

Hi,
i recommend having a Service request logged for this issue, as from related documentations in metalink most of them seemed to be a bug where oracle suggested patches (code Fixes) ... hence reaching oracle support would be a better approach ...
Regards,
Ivruksha

Error while adding a custom field with Input help via AET

Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
Shivani

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

Error while running custom BI report in R12.1.1

Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
Praveen

Hi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Having error while customizing CA51

Similar Messages

Maybe you are looking for