Having problems scanning after installing Maverick on my Mac.

I have 2 deskjet printer/scanners- F4180 and 2512. Neither will scan properly since installing Maverick. I have spent hours with the folks at Apple and they finally suggested call HP but I can't find an 800 # for customer service.
Does anyone have a solution to this yet?

Hi Nedly,
Welcome to the HP Forums! I see that you cannot scan with 2 HP Deskjet printers F4180 and 2512 with MAC OS X 10.9. I am happy to help you with this issue! I would recommed the following:
Reset the printing system. OS X Mavericks: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
For the HP Deskjet F4180. please take a look at this web site for installing on Mavericks. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
If you need the software for the HP Deskjet 2512. Visit this web site. HP Deskjet Full Feature Software and Drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8, OS X 10.9.
Hope this helps you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

After installing Mavericks, office for mac 2008 doesn't work properly

After installing mavericks, office for mac 2008 is slow, unresponsive a lot of the time, and slows my whole mac down if i want to do other things at the same time. Is there a solution that doesn't involve spending loads of money on a newer version of office for mac?

All Good. Are there any pending updates for MS Office by chance? Just check under the Help menu in the top Menu when you open Word.
I highly recommend you to reinstall the latest Office 2008 update > http://www.microsoft.com/en-us/download/details.aspx?id=36897 Note that Office 2008 is not supported by Microsoft anymore (thanks Mende1 for the link)
Pete

Call Of Duty LAN Servers does not work after installing Mavericks on my Mac Air, I need help!

Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After installing maverick on my Mac Pro

after upgrading to maverick on my macpro I loss my wifi, no airport icone on the menu bar, when i go to Network pane and try to add it , i do no see it in the choices. but when open airport utility my wireless airport extrem is reconize , before with mountain lion everything was ok.help thanks
Mario

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Problem with Word after installing Maverick

After installing Maverick word for Mac is not able to be open. Excell & PowerPoint works without problems. According to local Apple store it's a common problem and I should wait for an update from Microsoft. Does anyonwe faced the same issue ?

You'd have the same version of Word since the MS updates update all MS Office apps.
The only thing that I can suggest is to take your question to the MS Office 2011 Mac forums -> http://answers.microsoft.com/en-us/mac.
That's where I'm headed to complain about my font problems!
Clinton

After installing mavericks on mac mini network printers disappeared

After installing Mavericks on my Mac Mini, all printers on the home wifi network disappeared and cannot get them back. Tried deleting and re-installing printers and all updates. Network does not see them from the Mac Mini. Is there some workaround or solution to this? Everything worked perfectly until the Mavericks upgrade.

Was there any evidence of a new or update printer driver at the Epson site for use with Mavericks OS X? Even if so, that may not be enough as the peripherial makers can be steps behind a new & different OS.
I have two Epson printers, one is an all-in-one WF845 (bought at 50% off) and an older Photo Stylus 820, this still makes great prints; both work wireless in different ways. However I have what are essentially antiques in both hardware and software.
Not sure if there are any third party drivers that could help as a fix or a patch for the situation you face, if Epson hasn't a working alternative to being printerless. Too bad that paperless society didn't evolve to save a few trees and thousands of gallons in expensive ink.
Good luck & happy computing!

Lost all my mail and folders after installing mavericks. How can I get these back?

After Installing Maverick on my Mac it seems that I have no mail folders anymore and I lost also all the mails that were stored. How do I get these back?

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

Serious external drive problems after installing Mavericks

OK, so now I am seeing multiple external drive problems. Here is my setup: A GTech 4TB drive connected to MacBook Pro via Firewire, formatted of 2 partitions of 2TB each (called GT1 and GT2). This is then daisy chained to two WD drives of 2TB each, called WD1 and WD2.
After installing Mavericks everything worked fine (in fact I have an amazing speed increase). However, after restarting my machine this morning I have the following issues:
The GTech is now a single partition called MyBook (obviously a hangover from the WD drives. I suspect the WD drive managment software) with NO data files. Interestingly it shows the following USED 1,106,870,272 bytes (1.11 GB on disk). This suggests that one of the partitions has disapeared completely.
Whilst WD 1 launces ok, WD 2 causes the Finder to relaunch whenever selected, meaning I can't get to the files. I remember having this problem before when I upgraded to SL, and it having something to do with hidden files that needed to be deleted via the terminal. However, I have searched the web and can't find the solution again.
Given that WD 1 and 2 are my backups of GT 1 and 2, then I now have a situation where I cannot access my primary or backup files for GT 2. Very impressive - not!
Can anbody remember the hidden file solution for the finder relaunch?
Can anybody help me get back my GT1 and 2 partitions (as they have the latest work on them)?

FIrewire & Thunder bolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

I am also having trouble with my cursor freezing after installing Mavericks. Never did it before. I called tech support at Apple and they had me restart computer and mouse together from a complete shut down. So far has seemed to work.

I am having trouble with my cursor freezing between applications after installing Mavericks. Called Apple on my 3 year warranty and opened a case. They suggested a complete shut down of computer and turning off mouse. Then a reboot and turn on mouse. So far iit has seemed to work. Hope this continues??
Hope it helps others.

I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS.

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

External microphone problems after installing mavericks

I cannot seem to get my mac air to detect my external usb mic after installing mavericks. anyone else having this issue? guidance?

Hi,
I am having this issue too. I'm using a Samson C01U, which I've had for years and working fine, now gets this when plugged in:
This is on a MBP (1 year old) running 10.9.2.

If you have problems with Apple Apps after installing Mavericks

I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open. The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE. I am guessing it has to do with permissions when setting up via iCloud. Here's what I did to make my apps work again after the update:
Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
After it boots up, the apps began working like they should have.

That's where your questions about Lion should be posted.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Having problems scanning after installing Maverick on my Mac.

Similar Messages

Maybe you are looking for