Having recently updated Firefox, there now seems to be a long delay before many webpages load. Is there any way to easily revert to the previous arrangement, for example by removing new features that came with the upgrade that I probably don't use?

Similar Messages

HT1476 After update to either iOS 7.0.3 or 7.0.4, my iPhone 4S won't charge. I'm using charger and cable that came with the phone. Nothing else changed.

I'm using charger and cable that came with the phone. Nothing else changed.
I think it was the update the iOS 7.0.4 that I did last night. I woke up this morning with my battery almost drained and the charging function going off and on every few seconds, like it would start charging then disconnect, then reconnect repeatedly.
I've tried restarting the phone and hard restarting the phone several times, but I'm getting really low on battery by now (under 20%).
I've tried cleaning the connector with a little isopropyl alcohol, and blowing it out with compressed air. Though I can't be 100% certain, it's very unlikely my connector died exactly at the same time I was updating my phone. Especially since it appears I'm not the only one with this problem.
And now, after the last hard reset, my phone doesn't even recognize the charger at all, or being connected with the USB cable to my MacBook Pro.
I turned off my phone so when I go to the Apple Store it will power up one last time, but besides that I'm out of ideas.

Just back from Genius Bar and two other people at my table had the same problem. Their 4Ss aren't charging either. One of them had a fried board according to the tech. At least my HW checked out OK. It just won't charge.
The tech tried to tell me that it was because my connector was corroded, which I told him was kind of a weak argument since evidence points to that the update has something to do with it.
They're seeing a lot of these and it looks like they already have a script.
Luckily I had enough juice left to recycle it for like $180, so I picked up a 5S with a new 2 year.
It looked to me like this is going to blow up pretty big. Like class action lawsuit big.
If you have an iPhone 4 or 4S, and you haven't updated it to iOS 7, don't for now. See if a patch comes out that doesn't brick your phone. Or get an induction charger maybe? Don't just update and expect absolutely no problems because too many people are having problems right now.

How do i recover the drivers that came with the delivery? (Dolby problem after 8.1update)

Hello there community!
I have a burning question.
I recently bought a thinkpad edge 540. Which came preinstalled with windows 8.
When i updated to 8.1 I lost my dolby audio, this seems to happen a lot more, reading through this community.
There is a solution for that, to just reinstall the audio input and output device with the drivers that came with the delivery. However, and here is my problem.
In the solutions given, they are talking about a section on the hard drive that should contain the drivers. In most cases E:\DRIVERS.
Unfortunately, thats not the case with me. I know there is a recovery partition, but i cant see it within windows.
I used this to reset to the factory defaults already, but i cant find a drivers section.
Im hesitant to update again to 8.1 now, because it gave me several issues. One of them was the intel wifi driver, which was hard to resolve in the beginning, but also now the DOLBY audio.
Can anyone tell me, where to find the drivers? or is it just not possible?
I dont have a drivers section, or partition on my hard drive anyway..
Can you guys please help me out? Since i like the dolby feature, and it would be a shame to not be able to update to 8.1. (safety issues and features).
I know there are more people encountering this problem, but the solution to just use the preinstalled driversection.. is not an option for me, sadly. Or perhaps I am wrong..
Any help is greatly appreaciated! Thanks guys!

You could try contacting the iTunes Music Store Customer Service and you may be able to persuade them to sanction a second free download however they are not under any obligation to do so. The policy on lost songs is that you have to pay to download them again:
"Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage."
You can email them from any of the links on this page: iTMS Customer Service

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

Droid RAZR HD won't charge with either cable that came with the new phone.

My RAZR HD will not charge using either of the USB charging cords that came with the phone and I have tried several different USB/wall type adapters. I have to use a generic charger (not a USB cord, just a straight outlet to phone type). The data cable that connects the phone to my laptop works so it doesn't seem like it is a connection problem. Is anyone else having this trouble?

Thank you for the reply. After much trial and error I finally discovered
that the USB/outlet adapter cannot be plugged into any type of outlet
adapter (like converting two outlets to 4 or 6 in a wall outlet), extension
cord, or power strip/bar to function. It must be plugged directly into the
wall socket (or computer) in order to charge.
On Mon, Nov 18, 2013 at 10:07 AM, Verizon Wireless Customer Support <

My iPhone cable gave me a warning this morning that it was not certified to work with this phone, but it is the cable that came with the phone and that i have been using for a year and a half. Why?

i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone. Why?

If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.

If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
http://support.apple.com/kb/ht3406
To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

I want to sell my MBP. How do I completely erase my 2007, 17-inch Macbook Pro that is currently running Snow Leopard. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE BOX ANYMORE.

I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.

raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine?

How can i get apple to understand this is an authorize cord? It's the cord that came with the phone.

How can i get apple to understand this is an authorize cord? It's the cord that came with the phone.

cheriefromcatawba wrote:
How can i get apple to understand this is an authorize cord? It's the cord that came with the phone.
Is that what Apple told you when you took your phone and usb cord to the store?

After I make a note in the notes icon that came with the ipad, it immediately is emailed to my email address and disappears from notes. How can I make it stay on notes?

After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

My earphone that came with the ipod touch is not working

the earphone that came with the ipod is not workin, the microfone doesnt work, and the volume control doesnt too, but, the stop/play button works, and the overall sound from the phone, wat is happening? can smeone help me?

This maybe because there is a piece of tissue, crumbs... ect in the earphone hole.
Try getting stuff out, if there is nothing there... I got nothing.
Hope this helps,
Max

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

I Have a Macbook Pro that does not have a disk drive. How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased. I registered the S/N and I can't find the Free download anywhere only trials.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My hard drive on my Mac Book Pro failed last week. I replaced the hard drive today and had to use my snow leopard disc that came with the computer to get teh thing going. I was running Mt Lion which I had purchased last year on the old dr

The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?

Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

Having recently updated Firefox, there now seems to be a long delay before many webpages load. Is there any way to easily revert to the previous arrangement, for example by removing new features that came with the upgrade that I probably don't use?

Similar Messages

Maybe you are looking for