Application sizing issue

It seems like Flex apps don't size properly in Mozilla Firefox.
Do demonstrate, I made this sample application:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Canvas left="10" top="10" right="10" bottom="10" backgroundColor="#CA2020"> (don't worry about the color value...not accurate)
</mx:Canvas>
</mx:Application>
When deployed to the server (it works fine when launching the app throught the Flex Builder). Here's how it should look (in IE, Chrome and Safari):
And here's how it looks when viewed in mozilla FF:
Does anyone have ANY idea why is this happeneing and how to work around it.
In my current project I've asked the company to not list Mozilla FF in the "supported browsers" list, which is pretty embarrassing considering that a lots of people (including me) use Mozilla FF as our default browser.
Any help will be appreciated.
Best Regards..........

Hey Ryan,
Thanks for the input, but the situation stays the same.
The sizing of the wrapper has always been a choice, but I cannot do that, I want the flex app to resize itself with the browser size, rather than have the user resize the browser to get the full view of the app.
The height:100% solution did seem to be promising but alas!. Although, the width:100% works perfect.
I'm still looking for an alternative, if you have any other suggesstion, please do care to write.
Thanks and Regards.......

Similar Messages

  • [svn:fx-trunk] 5367: The changes here are mostly fixing some sizing issues.

    Revision: 5367
    Author: [email protected]
    Date: 2009-03-17 15:26:35 -0700 (Tue, 17 Mar 2009)
    Log Message:
    The changes here are mostly fixing some sizing issues.
    For the FlashContainerPlaceholder, the first child is now MyFlexContentHolder, which extends mx.flash.FlexContentHolder but meets the invariant that it has 1 child and that child is FlexContentHolderThumbnail, which I?\226?\128?\153ve added as a swc to the project. I changed this by accident last time to refer to mx.flash.FlexContentHolder, when it should've referred to a concrete instance created by Flash from a swc. I also added a chrome of 151x151 to match the FlexContentHolderThumbnail since otherwise the container itself would have no chrome at all, and this let?\226?\128?\153s it size correctly.
    Also, for sizing, in a container, rather than sizing to the size of the chrome, I now size to the size of the FlexContentHolder thumbnail that all FlexContentHolder?\226?\128?\153s have. This means in ContainerMovieClip, I don?\226?\128?\153t need to override bounds anymore.
    ContainerMovieClip now implements IVisualElementContainer.
    Also, I fixed a resizing event bug in UIMovieClip where the resize event was getting dispatched more than once.
    QE Notes: -
    Doc Notes: -
    Bugs: SDK-19271, SDK-19788, SDK-19789
    Reviewer: Glenn
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19271
    http://bugs.adobe.com/jira/browse/SDK-19788
    http://bugs.adobe.com/jira/browse/SDK-19789
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/ContainerMovieClip.as
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/FlexContentHolder.as
    flex/sdk/trunk/frameworks/projects/flash-integration/src/mx/flash/UIMovieClip.as
    flex/sdk/trunk/frameworks/projects/utilities/build.xml
    flex/sdk/trunk/frameworks/projects/utilities/src/FlashComponentPlaceholder.as
    flex/sdk/trunk/frameworks/projects/utilities/src/FlashContainerPlaceholder.as
    Added Paths:
    flex/sdk/trunk/frameworks/projects/utilities/libs/
    flex/sdk/trunk/frameworks/projects/utilities/libs/FlexContentHolderThumbnail.swc
    flex/sdk/trunk/frameworks/projects/utilities/src/MyFlexContentHolder.as

    Hello Everyone,
    We request you all to try your applications with http://labs.adobe.com/technologies/flashplatformruntimes/air3-5/
    Release Notes - http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/shared/air3-5_flashplayer11-5 _releasenotes.pdf
    Please let us know how it goes.
    -Thanks
    Pahup

  • Regarding Sun Java System Application Server Issue with JVM

    Regarding Sun Java System Application Server Issue with JVM
    Hi
    I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
    type Exception report
    message
    descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
    PWC6199: Generated servlet error:
    [javac] javac: invalid target release: 1.5
    [javac] Usage: javac
    [javac] where possible options include:
    [javac] -g Generate all debugging info
    [javac] -g:none Generate no debugging info
    [javac] -g:{lines,vars,source} Generate only some debugging info
    [javac] -nowarn Generate no warnings
    [javac] -verbose Output messages about what the compiler is doing
    [javac] -deprecation Output source locations where deprecated APIs are used
    [javac] -classpath Specify where to find user class files
    [javac] -sourcepath Specify where to find input source files
    [javac] -bootclasspath Override location of bootstrap class files
    [javac] -extdirs Override location of installed extensions
    [javac] -d Specify where to place generated class files
    [javac] -encoding Specify character encoding used by source files
    [javac] -source Provide source compatibility with specified release
    [javac] -target Generate class files for specific VM version
    [javac] -help Print a synopsis of standard options
    note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
    I have cheked jvm version on both system the only difference is :
    Solaris points to jdk 1.5.0_09
    Windows point to jdk1.5.0_05
    Even i tried to run blank jsp also but again i got the same error.
    Can any help me to sort out the problem or give me any idea so i can do something by my own.
    Thanks in Advance
    Gagan

    Do you have ANT installed and available?
    Thanks,
    Kedar

  • How do I avoid sizing issues with a Bevel?

    I am designing a logo for a startup business, and a beveled filter really looks nice for this particular company. The client really likes what I came up with. The problem is the filter seems to cause sizing issues. Enlarging it is creating ugly pixelation. Is there a method for avoiding this, or can I simply not use a bevel?
    Thanks.

    In the preferences check scale strokes and effects

  • Application Deloyment issue...

    hi,
    i am getting this Deployment error...
    we got two servers one for developers at offshore and
    one at the onsite...
    the strange thing is that it is deploying n running fine on the offshore server.
    but not getting deployed on the onsite server!!!
    i have put the required references required and
    checked them too...!!!
    regards,
    -Amol Gupta
    Oct 18, 2007 11:11:04 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [004]Deployment aborted
    Settings
    SDM host : bp1xeuaa558
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/amolg/LOCALS1/Temp/temp26291bp.comexmplsupplier_lds_create_adobe.ear
    Aborted: development component 'exmpl/supplier_lds_create_adobe'/'bp.com'/'LOKAL'/'0.2007.10.18.11.10.17'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application bp.com/exmplsupplier_lds_create_adobe.. Reason: Clusterwide exception: Failed to deploy application bp.com/exmplsupplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application bp.com/exmpl~supplier_lds_create_adobe. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted

    >
    I have oracle PL/SQL application performance issue. To open a screen populated with 7,000 records takes 5 minutes.
    I have used SQL Analyze to get Index recomendation. Indexing did not help that much.Switch on a trace on a user who is just about to run that screen - let them rip.
    Stop your trace. Get your trace file. Run it through TKProf.
    Read the book by Cary Millsap that Sybrand recommends (or take a look
    at Chris Lawson) - i.e. read up on trace files and looking at them.
    Get the SQL that is run by the user and try running it from SQLPlus
    on the server (no network or app issues) - set timing on.
    That would be my approach.
    Do you think upgrading or replacing with newer machine can improve performance? Getting a newer machine often satisfies the geek's primeval urge to
    get his grubby little paws onto fancy shiny hardware - it may well
    work for a while, however you're not tackling the underlying cause
    of your problem, and it will (probably) reappear when the limits
    of the new RAM/CPU have been hit.
    If you what is suggested above, at least you'll be able to say
    to your management - "well, if we get a new server, performance
    will improve by this much, until we have (say) 14.000 records in
    the table, when performance will go back to the way it was before".
    Until you run a trace, you will have no idea if the problem will
    scale linearly with the no. of records or how it will
    behave into the future.
    You cannon manage what you cannot measure.
    Paul...
    Taf

  • Sizing Issue

    I'm doing a project for school and having some sizing issues
    with my pages. earlier in the project my partner and I had some
    major issues with style sheets and banner headings, but now
    whenever we preview a page it changes size. We have about 10 pages
    and when you change from page to page the main text area either
    becomes really big, shrinking the other text areas, or becomes
    extremely small letting the other text areas take over. Can anyone
    tell me what we are doing wrong and how to dix this problem?

    Can you post a link to these pages, please?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "luv4dirish" <[email protected]> wrote in
    message
    news:ekhd19$abb$[email protected]..
    > I'm doing a project for school and having some sizing
    issues with my
    > pages.
    > earlier in the project my partner and I had some major
    issues with style
    > sheets
    > and banner headings, but now whenever we preview a page
    it changes size.
    > We
    > have about 10 pages and when you change from page to
    page the main text
    > area
    > either becomes really big, shrinking the other text
    areas, or becomes
    > extremely
    > small letting the other text areas take over. Can anyone
    tell me what we
    > are
    > doing wrong and how to dix this problem?
    >

  • Application redraw issue over Citrix and Terminal Server

    Hi All,
    We provide a client-server application which connects to a SQL Server database. The middle-tier is hosted on an application server (Windows Server 2008 R2) which in turn connects to the SQL Server database. The fat client can either be installed on user laptops/desktops
    or published using Citix/Terminal services.
    We have a long standing issue which frankly I just cannot fathom. A customer has published the client via Citrix to users and using roaming profiles. If an employee is using the application in London, the roaming profile is created on a server in London and
    connects to the middle-tier in London. If an employee is using the application in Glasgow, the roaming profile is created in Edinburgh and the user connects to the middle-tier in London. The customer is also using DFS
    The roaming profile consists of the 'My Documents', 'My Pictures', 'My Videos', 'My Music' and 'Windows' folder. Distributed File System (DFS) is used for roaming profile folder replication between offices. See http://technet.microsoft.com/en-gb/library/cc732863%28v=ws.10%29.aspx
    The Edinburgh users are experiencing application redraw issue where the interface loads in chunks. For example, when a user scrolls up and down or left and right, the data loads immediately (from SQL Server) but the interface (GUI) loads in blocks. You can
    actually see each segment of the GUI components loading. The issue also occurs if connecting via a Terminal Server where the application is also installed.
    For London users, it all works fine. If an Edinburgh user comes to London, they have no issues.
    The network connection is super fast between the various offices.
    The application is built using C++ and Delphi and uses the GDI API to draw the objects.
    Any guidance is appreciated.

    Hello partner,
    Thanks for contacting Microsoft. This is Sophia who is going to help with this issue. From your description, I learnt that users from Edinburgh have application redraw issue. However, London users worked fine. Please let me know if I misunderstand your purpose.
    Based on the information, it seems that the issue located in the middle-tier in London. Could you try building a middle-tier in Edinburgh and then test how the issue goes?
    Besides, based on my experience and research, by default the allocation of the bandwidth is 70 percent for graphics data and 30 percent for virtual channel data, meaning when bandwidth usage is under pressure, graphics data is guaranteed to get 70 percent
    of the available bandwidth.  And we can tweak the settings a bit for some scenarios. To change the settings, we can set registry values. Please reference the information below.
    ===========================================================================================================================================
    Note: For these settings to take effect, the computer must be restarted.
    Following is the list of registry values that affect the bandwidth allocation behavior. These are all DWORD values under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermDD:
    ·         FlowControlDisable: When set to 1, this value disables the new flow control algorithm, making it essentially First-In-First-Out (FIFO) for all packet requests. This provides results similar to Windows Server
    2003. (The default for this value is 0).
    ·         FlowControlDisplayBandwidth / FlowControlChannelBandwidth: These two values together determine the bandwidth distribution between display and virtual channels. You can set these values in the range of 0–255.
    For example, setting FlowControlDisplayBandwidth = 100 and FlowControlChannelBandwidth = 100 creates an equal bandwidth distribution between video and VCs. The default is 70 for FlowControlDisplayBandwidth and 30 for FlowControlChannelBandwidth, thus making
    the default distribution equal to 70–30.
    ·         FlowControlChargePostCompression: If set to 1, this value bases the bandwidth allocation on post-compression bandwidth usage. The default for this value is 0, which means that the bandwidth distribution is applied
    on pre-compressed data.
    For more information about RDP Bandwidth, please reference the article below.
    ================================================
    Bandwidth Allocation for Terminal Server connections over RDP
    http://blogs.msdn.com/b/rds/archive/2007/04/09/bandwidth-allocation-for-terminal-server-connections-over-rdp.aspx
    Top 10 RDP Protocol Misconceptions – Part 1
    http://blogs.msdn.com/b/rds/archive/2009/03/03/top-10-rdp-protocol-misconceptions-part-1.aspx
    If you have any concerns about the action plan above, feel free to let me know.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Croping and sizing issues

    I have been using lightroom 4 for about 5 months.  But I am having issues with croping and sizing of pictures.  When I use the crop tool it does not always draw the picture in closer. I do shoot in RAW and not in JPEG.    I was wodering if there is a setting that I am not using or its not avaiable.  Also when I export out of lightroom4 and convert them from RAW to JPEG I have sizing issues depending on what size the customer orders.  I have tried to export them out at certain sizes but its still not correct.  The only way I have found to do it is going into photoshop and sizing them correctly but its very time consumeing .  Any help would be great!!

    You didn't tell us the desired output. All you said "...but its still not correct". What output are you trying to obtain?
    Also, what do you mean "When I use the crop tool it does not always draw the picture in closer"? Normally, you drag a corner (or corners) of the crop rectangle to crop tighter. Are you doing this? Is it not working? Explain.

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • [svn] 2913: Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.

    Revision: 2913
    Author: [email protected]
    Date: 2008-08-19 21:55:11 -0700 (Tue, 19 Aug 2008)
    Log Message:
    Fix SWFLoader sizing issue (SDK-16497) Refactor some classes to try to fix ASDoc build.
    Review: DJL
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16497
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/airframework/src/mx/managers/WindowedSystemMa nager.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/controls/SWFLoader.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/ISystemManager.as
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/SystemManager.as

    Thanks for sharing.

  • Odd character sizing issue

    I'm having an issue with some odd character sizing (ID cs6). The font I'm using is Avenir Next Condensed Demi Bold (although this issue is happening with other font weights within the same family). The image below shows the problem, the u is slighly larger than the other characters. Sometimes this goes away on-screen depending on how close I zoom in, but the real problem is that it's printing slightly larger too. It's the same paragraph style, and I don't have any character styles applied... any ideas on what is going on here, and more crucially, how to fix this?  Thanks kindly in advance for any help with this.

    Does this happen in other applications? How about AI, Word, LibreOffice, that sort of thing. Do you have another computer with Avenir installed you can test the font on?
    Mike

  • Developer Application Provisioning Issues -- Only one app at a time?

    _The upshot:_
    You can have one and only one developer provision and developer application on the iPhone at a time otherwise you get installation errors (i.e. 0xe8000001).
    _To fix:_
    Use Xcode Organizer to ensure that you have one and only one application and provision installed to the iPhone that uses your developer certificate.
    _To any Apple people:_
    If I am wrong about any of this, please let me know. I have wasted 3-4 days over the past 2 weeks due to these issues, and any explanation would be well received! Having one and only one application and provision installed to the iPhone fixed the 0xe8000001 issues for me.
    _Long winded explanation:_
    It turns out that I am working on multiple iPhone applications at the same time.
    Each application has a different AppID (as registered on the iPhone Developer Portal).
    I have spent quite a bit of time having major issues with Developer Provisioning and application installation from within Xcode and Xcode Organizer, which led me to not be able to debug my application on a live iPhone.
    I finally discovered my problem: I can only have one app and one provision on the iPhone that uses the same developer certificate.
    When swapping between Xcode projects if I remove all provisions and applications using Organizer and re-add only the provision of the application I am working on, then the install errors at build time go away.
    Samples of install errors that manifest themselves using the 0xe8000001 code:
    Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: entitlement 'application-identifier' has value not permitted by provisioning profile
    Thu Aug 21 16:56:02 unknown mobileinstallationproxy[770] <Error>: verify_executable: Could not validate signature: e8008016
    -- Taken from the Xcode Organizer Console window for my development iPhone --
    These errors seem to be occurring because of an install time check against the installed provision files to verify the app, and it seems the provision from an already installed application is being used.
    This is probably occurring because the main developer certificate has to be the same between the 2 applications. As the scan through the provisions is occurring, the certificate of the new app matches the certificate from the already installed app, and the provision check fails due to different App IDs.
    There is one and only one developer certificate allowed per iPhone Standard program.
    I hope that this helps some other people out there with their development provisioning and debug / installation errors.
    --Batgar

    This is why you should create a wildcard developer certificate (com.youcompany.*)...follow the directions in the program portal. Then you can then install all your apps on your phone.

  • SAP R/3 application component issue

    Hi all,
    My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
    Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
    So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
    Regards,
    Prabhakar.

    Hi Markus,
    This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
    So please suggest me the approach to resolve this issue.
    Regards,
    Prabhakar.

  • Socket based application - Performance Issues - Suggestions Needed

    Hi All,
    We have an application which basically has been developed using core java. Here is a high level information about the application:
    a) It opens a serversocket which allows clients to connect to it.
    b) For every new client connection, a separate thread is created and this thread deals with requests from clients, processing the data and replying back to clients.
    c) Each socket is polled continuously and sockettimeout is 2 seconds. If there is a timeout, we handle the situation and socket is again read. So basically sockets is read every 2 seconds. If number of timeouts reaches a configurable value, we close the connection and thread is dropped as well.
    d) In production, three instances of this application are running with the help of a cisco load balancer. It is there for last 5 years.
    However there has always been some minor performance isssues and we have sorted them out using different types of garbage collectors, by introducing hardware load balancers, upgrading the code for new Java versions. It is currently running on 1.4.2.
    However there has always been some performance issues and today while googling over internet I came across following on the bea website which says that core java sockets are not as efficients as native API. BEA has implemented its own APIs for weblogic. My queries are:
    a) Are there any better Java Socket/network API (for solairs, I know Java is plateform independenet but there could be lib which also using native libs) which are much more efficient than Core Java.
    b) We are getting the InputStream/OutputStream and creating objects of DataInputStream/DataOutputStream to read the data 'Byte-By-Byte'. Each byte can have different information thats why it is required. Are there any better way of getting info than what we are currently doing.
    c) As I mentioned, we are continously polling the socket for read operation with a timeout value of 2 seconds. What is the better among the following from performance point of view: (1) Frequent read operation with a lesser timeout value or (2) Less Frequent read operations with larger timeout value. (3) Any better idea??
    Please suggest few things or pointers which I could do to improve the performance of the applcations. Many thanks.
    Thanks,Akhil
    From BEA website:-
    "Although the pure-Java implementation of socket reader threads is a reliable and portable method of peer-to-peer communication, it does not provide the best performance for heavy-duty socket usage in a WebLogic Server cluster. With pure-Java socket readers, threads must actively poll all opened sockets to determine if they contain data to read. In other words, socket reader threads are always "busy" polling sockets, even if the sockets have no data to read. This unnecessary overhead can reduce performance."

    My recommendations:
    - Always use a BufferedInputStream and BufferedOutputStream around the socket streams
    - Increase the socket send and receive buffers to at least 32k if you are on a Windows platform where the default is a ridiculous 8k, which hasn't been enough for about 15 years.
    - Your 2-second timeout is far too short. Increase it to at least 10 seconds.
    - Your strategy of counting up to N short timeouts of S seconds each is completely pointless. Change it to one single timeout of N*S seconds. There is nothing to be gained by the complication you have introduced to this.

  • Application Deployment issue in Webdynpro project

    Hi,
    I have created an sample Webdynpro project which just displays the name. EAR file has been transformed to SCA file using NWPACKTOOL for deploying the application in JSPM.
    When i tried to deploy the SCA file i am getting an exception as,
    Deployment Items -
         1. Client path 'C:\usr\sap\WP1\SYS\EPS\in\test1.sca'
              Deploy status is 'Aborted'
              Description:'1. Item is skipped because of failed deployment of item 'test.com_test' and because the applied error strategy is OnErrorStop
              2. Contains Aborted deployment component:
    test.com_test'.
              SCA : name 'test', vendor 'test.com', location 'local', version '1000.1.0.1.0.20110810105342'
              Contained DCs:
                   1.1 : Relative path 'C:\usr\sap\WP1\SYS\EPS\in\test1.sca --> test.sca.ear'
                        Deploy status is 'Aborted'
                        Description:'1. ASJ.dpl_ds.006193 Error while deploying ear file C:\usr\sap\WP1\J00\j2ee\cluster\server0\.\temp\tcbldeploy_controller\archives\56\test1_sca1312954437078\DEPLOYARCHIVES\test.sca.ear; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception while [validating application test.com/test.
         The test.com/test application was processed from [developmentserver] containers, but none of them returned information about deployed components.
         The registered containers in this moment were [BRMS_Content_Archive, z_com.sap.security.policy-configurations, utl_handler, developmentserver, Monitoring Configurator, component.info_handler, servlet_jsp, connector, classification_handler, CTCContainer, JDBCConnector, PortalRuntimeContainer, dbcontentcontainer, scheduler~container, Content Container, src.zip_handler, PCD Content Deployment Handler, ConfigurationsContainer, orpersistence, appclient, JMSConnector, Cluster File System, Cache Configuration Upload, com.sap.security.ume, SCA Composites Container, metamodelrepository, textcontainer, eden_handler, Galaxy_Content_Archive, uddi_handler, MigrationContainer, com.sap.security.login-modules, webservices_container, EJBContainer, dbschemacontainer, MDRContainer, com.sap.security.policy-configurations, app_libraries_container].
         Possible reasons :
         1.Empty or incorrect application, which is not recognized by registered containers.
         2.An AS Java service, which is providing a container, is stopped or not deployed.
         3.The containers, which processed it, are not implemented correctly, because the application was deployed or started initially, but containers didn't return information about deployed components in the application deployment info].'.
                        SDA : name 'test', vendor 'test.com', location 'local', version '2', software type ('J2EE', s
    Can some one help me in deploying the SCA file?
    Please let me know how to resolve this issue.
    Thanks in Advance!!
    Regards
    MG
    Edited by: madhanssmile on Aug 10, 2011 2:34 PM

    go to "DC Metadata" "used DC"  , and "Properties" in context menu
    for all you your components.
    problematic component reference probable has check box "deploy time" checked.
    remove that reference.
    usually only "Build time"  check box must be checked. try to do so.

Maybe you are looking for

  • How to get Music "purchased" on iTunes on my Apple TV?

    I had no problem getting my CD music that was loaded into iTunes to appear on my Apple TV, but I could not get my music that was "purchased" from iTunes to appear on my Apple TV. I made a playlist with music that I purchased and music I loaded from m

  • Autoinstall in IE 64-bit

    Is there any way to autoinstall java in the Internet Explorer 8 54-bit? Now I'm set object's codebase attribute to http://java.sun.com/update/1.6.0/jinstall-6u16-windows-i586.cab and it works fine in IE 32-bit. However, in IE 64-bit it doesn't works,

  • 10.5.3 Update won't update

    For some reason, the new 10.5.3 update won't install for me. I go to Software Update, and it shows me three updates available at the moment (Quicktime, Mac OS X Update, and Airport Utility). I click the install button and type my password to restart,

  • Copy Standard infotype screen for country purpose

    Hi, I am trying to copy the Standard screen (2007) for the infotype IT0002 to make some country specific modification. However I am not able to copy the standard screen as it is asking for the Access Key. Can you please suggest if there is a way to c

  • Audio output on Mac Mini Dual Core

    The Mac Mini outputs both stedigital 5.1 audio. MPEG4 video files encoded in H264 AAC 5.1 format do not output any audio when the Mac Mini is connected to a standard stereo amplifier. Is there a way to force the output to standard Stereo instead of 5