Having some problems with the effects.

When using the lens flare I try to change the position of the center of the flare by going into filter options and then using either the x and y axis or one click placement button. But when I try and change the position nothing happens even though is registers that new location on the canvas... what is wrong?

Hey Team Zissou! The new system for discussions asks that after you mark your question as answered, you take the time to mark any posts that have aided you with the helpful tag and the post that provided your answer with the solved tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Similar Messages

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Having some problems with the 8350i. Need Help Please!

I just got the 8350i through Sprint/Nextel and already am having problems receiving text messages and when I finally do receive them (one day later or after turning set off then back on), I have to manually receive the message.
Also, I have customers complaining about an echo on their side of the phone every time they call me. Saw some others where having this problem as well.
Is there anything I can do to fix this? My phone is vital to my business and any help is greatly appreciated!!!
Thnaks!!

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Re: Having some problems with the 8350i. Need Help Please!

Everyone I talk to hears echo's. I also don't get text messenges until sometimes a full day after they're sent. I wonder if our geographic area dictates why this is happening.. if you search the forum for "echo" there's quite a few people with the same problem. I'm in Florida.

How are you receiving the sms manually?
If your device is new, proceed to change the device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..

Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes?

Having some problems with apps froms the app store

Hello. Since I got my iTouch I've been having some problems with some apps. Some work perfectly fine, but some others are just crashing after a few seconds. I've tried everything I found, but it seems like my problem is different from the one related by lots of others iPod users. Here's a video a friend of mine who's having the same problems I am did showing it:
http://www.youtube.com/watch?v=MI-gBhP_cgU
It's really annoying us. Does anyone know how to fix it? Does it look like a firmware problem? Thanks in advance.

Have youy tried:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- iOS: Troubleshooting applications purchased from the App Store
- Restoring the iPod from backup
- Restoring the iPod to factory defaults/new iPod.

HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

I´m having some problems with dates intervals. It´s not working well. I inserted the correct date between the right interval but the system refers to incorrect date? What shoul I do?

Mensagem editada por: Mauricio Galletti
It seens that there´s some problem with the specific date of 19/10/2014? Don´t know why? I just remove this date from the interval and the problem gone.
What´s wrong with 19/10/2014?

Hello Galdr,
Welcome to the HP Forums.
I see that after doing some updates, you've lost the use of switchable graphics in your Notebook. I will do my best to help you with this.
You can try is to use the HP Recovery Manager. This will allow you to "recover" the Notebook and reinstall the original drivers. This document: Using Recovery Manager to Restore Software and Drivers (Windows 7), can assist you with that.
Once the drivers are "reverted", then if you wish you can attempt updating.
This first thing I will provide you in regards to updating is this document: Switchable Graphics on Notebooks Configured with Dual AMD GPUs. There is more general information than anything, but you may find it useful.
When going to update you will want to use the website or the HP Support Assistant. These are the recommend ways to update. When using AMD's (or other OEM utilities) they will look for compatible drivers for the component, but not necessarily ones that work with your Notebook. What most likely happened, only one of the two drivers were actually updated.
Here is a link to the newest driver provided by HP: AMD High-Definition (HD) Graphics Driver. Also, here's a link to using the HP Support Assistant: Using HP Support Assistant (Windows 7). (in case you wanted to learn more/use this method).
I hope this is able to help you get back to "state 1", so that you may be able to update correctly and have full functionality of your switchable graphics again. Please let me know how this goes for you. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can someone explain this to me ,thank you

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can anyone help me with this problem? thank you

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

Having some problems with my c6-01

Hello there, I have recently bought a nokia c6-01 but I am having some problems with it. Such as, sometimes it freeze and it restart itself then it continues as nothing happened(dont ask me my pin code) my other problem is when I assign ringtone to my contacts it does not bell the tone normally , it plays the music in weird tone (btw my phone play that ringtone normally in music player ) what can I do against these problems ? Is this a software or hardware problem? Should I take it to the provider? Thanks.

random reboots are quite common
try updating the software before you do anything else.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Having some problems with the effects.

Similar Messages

Maybe you are looking for