Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes?

Similar Messages

  • Hello, I'm having some problems with caller ID

    Hi
    I've just got a blackberry pearl from a friend (which I love!!) but am having problems with the ID when I receive texts and calls. The text messages ID's come up as numbers (eg +447789*******) rather than the persons name. So I changed all the numbers in the contact list to show +44 at the beginning. And now when people call me its just coming up with numbers and not showing their names and the numbers are shown without +44 at the beginnging. Please can someone advise me how to stop this.The blackberry is about a year old and I've just starting using itHoping you can help.
    JJS
    (EDIT: Removed personal information )
    Message Edited by Andy on 07-29-2009 07:04 AM

    There could be any one of three solutions... Try these:
    1. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
    Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
    * In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
    2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
    * For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
    3. You may have "Content Protection" set on your Address Book.
    Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My ipod touch will not switch on and is no longer recognised by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

    My ipod touch will not switch on and is no longer recognized by itunes.  Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
    I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

    For the restore error messages try:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

    I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged  my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

    Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

  • Having some problems with my c6-01

    Hello there, I have recently bought a nokia c6-01 but I am having some problems with it. Such as, sometimes it freeze and it restart itself then it continues as nothing happened(dont ask me my pin code) my other problem is when I assign ringtone to my contacts it does not bell the tone normally , it plays the music in weird tone (btw my phone play that ringtone normally in music player ) what can I do against these problems ? Is this a software or hardware problem? Should I take it to the provider? Thanks.

    random reboots are quite common
    try updating the software before you do anything else.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Having some problems with apps froms the app store

    Hello. Since I got my iTouch I've been having some problems with some apps. Some work perfectly fine, but some others are just crashing after a few seconds. I've tried everything I found, but it seems like my problem is different from the one related by lots of others iPod users. Here's a video a friend of mine who's having the same problems I am did showing it:
    http://www.youtube.com/watch?v=MI-gBhP_cgU
    It's really annoying us. Does anyone know how to fix it? Does it look like a firmware problem? Thanks in advance.

    Have youy tried:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - iOS: Troubleshooting applications purchased from the App Store
    - Restoring the iPod from backup
    - Restoring the iPod to factory defaults/new iPod.

  • I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

    I tried to upgrade the new version for i pad mini but when downloading it just went off and told me to connect it to i tunes, so i did and now it says i need to restore it. Does that mean I will lose everything in my i pad?

    In other words, the upgrade process did not go altogether well and the device has lost all its contents. When you plug it in, they will be restored from the backup.

  • Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

    Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?

    When I want to get an app, an error message comes up saying I need 3.0 software update.  How do I get my ipod updated in itunes, when itunes says my ipod is already updated?
    OR if I cannot update to software 3.0, how can I find apps that will work just for my ipod touch?

    It sounds like you have a 1G iPod Touch, in which case you can only upgrade to iOS version 3.1.  Here is a link to purchase the update.
    http://support.apple.com/kb/HT2052
    B-rock

  • I´m having some problems with dates intervals. It´s not working well. I inserted the correct date between the right interval but the system refers to incorrect date? What shoul I do?

    Mensagem editada por: Mauricio Galletti
    It seens that there´s some problem with the specific date of 19/10/2014? Don´t know why? I just remove this date from the interval and the problem gone.
    What´s wrong with 19/10/2014?

    Hello Galdr,
    Welcome to the HP Forums.
    I see that after doing some updates, you've lost the use of switchable graphics in your Notebook. I will do my best to help you with this.
    You can try is to use the HP Recovery Manager. This will allow you to "recover" the Notebook and reinstall the original drivers. This document: Using Recovery Manager to Restore Software and Drivers (Windows 7), can assist you with that.
    Once the drivers are "reverted", then if you wish you can attempt updating.
    This first thing I will provide you in regards to updating is this document: Switchable Graphics on Notebooks Configured with Dual AMD GPUs. There is more general information than anything, but you may find it useful.
    When going to update you will want to use the website or the HP Support Assistant. These are the recommend ways to update. When using AMD's (or other OEM utilities) they will look for compatible drivers for the component, but not necessarily ones that work with your Notebook. What most likely happened, only one of the two drivers were actually updated.
    Here is a link to the newest driver provided by HP: AMD High-Definition (HD) Graphics Driver. Also, here's a link to using the HP Support Assistant: Using HP Support Assistant (Windows 7). (in case you wanted to learn more/use this method).
    I hope this is able to help you get back to "state 1", so that you may be able to update correctly and have full functionality of your switchable graphics again. Please let me know how this goes for you. Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • I have adobe premiere elements 10 and I am having some problems with it please help

    So here are the problems I'm having with Adobe Premiere Elements 10:
    1. Transitions will not load. The word loading pops up and it won't come up.
    2. The videos won't play smoothly. When I press play it skipps in a way it won't play smooth which makes it really hard to edit.
    3. Keeps closing out on me. It will have a thing that pops up that says "Adobe premiere elements has stopped working and closes out of the program. It does it constantly.
    Please help me I don't know what is wrong with it.

    The first two issues sound like a video driver problem.
    What is the make/model of your video card/chip?
    What is the installed video driver number and date?
    For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
    Good luck,
    Hunt

  • TS1538 My ipod 4th gen. is stuck on recovery mode, and it is stuck on the screen that says connect to itune. I tried plugging it to the computer with an undamaged cabel and bringing up itunes, but itunes or my computer isnt reconizing it.

    My ipod 4th generation is stuck on recovery mode and is stuck on the screen that says to connect to the itunes store. I already tried using a non-damaged cable and connecting it to itunes, but the ipod is not showing up as a device on my computer or on itunes. I cant fix the recovery screen until i can coinnect it to itunes... so does someone have any suggestions?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Having some problems with security certificates

    Hello,
    In some pages, e.g. Twitter, and pages that load FB comments sections, I'm having problems with the certificates and the pages won't load. I don't get an option to add an exception either, therefore I cannot access pages.
    I have pasted the error details below. Here is some important info for you:
    Version: 9.0.1 <-- Upgrading is NOT an option, this is a corporate machine
    Connect via proxy: yes
    I doubt very much that this is an issue with the connection, as IE and Chrome are NOT having this issue on the same connection.
    Error I get:
    This Connection is Untrusted
    You have asked Firefox to connect securely to twitter.com, but we can't confirm that your connection is secure.
    Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
    What Should I Do?
    If you usually connect to this site without problems, this error could mean that someone is
    trying to impersonate the site, and you shouldn't continue.
    Technical Details
    twitter.com uses an invalid security certificate.
    The certificate is not trusted because the issuer certificate is not trusted.
    (Error code: sec_error_untrusted_issuer)
    Can anyone shed some light? The usual troubleshooting I've come across hasn't helped me much.

    Off the cuff it smells of a man-in-the-middle situation to me. As far as I know, Twitter does have a valid certificate, signed by Verisign. That IE and Chrome have no problem with it, could just mean they do not check resp. do let you know.
    I'll have to pass here, because I would not know, how to turn this checking off in FX 9.0 - in any case I would think twice before doing it. The place to look would be Options > advanced > Encryption.
    Hope somebody else joins us:)
    PS: keeping you nailed down to Fx 9.0 version is unsafe - not just for you, but for your company as well.

Maybe you are looking for

  • Problem with JNI

    i have to implement a few standard APIs. As a part of the implementation I have to provide references to an object I create. Now my underlying code is C++ with JNI used to throw the Java APIs. Problem is JNI now returns different references for the s

  • How can I enable the android one-fibger zoom gesture in Firefox?

    2 OS versions ago, android changed the system wide zoom gesture to a single finger one. double tap -> hold -> move finger up or down This doesn't work in Android, which is still stuck on the old iOS style pinch zoom gesture. Is there an option to fix

  • Can you report a fault based on errors ?

    I seem to have a lot of errors on my broadband line and I was expecting a speed increase when I 'upgraded' to the up nto 20Mbps service but the sync speed has actually dropped slightly.  I have used the test socket etc and checked out all internal wi

  • Terminal input becomes a question mark

    Everyone's entitled to post a stoopid question - Here's mine: This happened once before: I hit a key on my 101 keyboard and the Terminals cursor changed to a "?" I have restarted the Terminal app and even logged in an out (with Remote Desktop) and an

  • Adobe dynamic forms on Mac OS X

    I just purchased a brand new Macbook Pro. However I need to install windows on it to be able to use it for work. My work uses Adobe Reader dynamic forms for us to submit orders. Currently dynamic forms don't appear to work in Mac OS X Lion or Mountai