Having trouble with buttons in motion menus
I'm having some problems with buttons in motion menus:
- I've created a motion menu where some text (button names) fade in.
- I set a loop point after the text has faded in completely.
- I set the end condition to "loop"
(there is some animation after the text fades in that I would like to loop)
- I draw out 5 buttons and assign different overlay colors to each of the button states.
The problem is that each time the motion menu jumps back to its loop point.. the menu seems to stutter - the overlay color on the currently selected button turns off for a second and the button is momentarily disabled (can't be selected). This problem only shows up on the actual dvd build. The buttons work smoothly when tested in the simulator.
I can avoid this problem by losing the animation and just setting the end condition to "still".. but I was wondering if anyone knows if there is something I might have missed or could try as a workaround.
17" powerbook g4 Mac OS X (10.4.5)
This problem only shows up on the actual dvd build. The buttons work smoothly when tested in the simulator.
It could be how the DVD is reading the DVD (sort of the nature of DVD, everything is not exactly the same), because buttons will not show until the loop point and there may be a slight pause from end of animation in the menu to the loop point. And the overlay will turn off briefly when it hits the end.
Visually what you can do is make the animation in a manner so that at the loop point the buttons are part of the background itself and make sure your loop point is at that point (or slightly after) so it looks like the button is there.
For the most part the setting of still may work okay (really a creative call), sometimes listening to the same music/seeing samee animation may be too much (of course it depends on project) and you can jump to the loop point on the menu on subsequent calls
Similar Messages
-
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
I'm having trouble with certain buttons on the Ebay pages.
I'm having trouble with certain buttons on the EBay pages. Like enlarge, other pictures,add to my watch list, etc. this happened after I upgraded to 8.0. I have tried to upgrade java but the java console will not work ?? tried all this in my other browser and all works fine. What do I do? Thanks
If it happens again then try to reload the website or clear the cache and the cookies from that website.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache -
Having Troubles with Fireworks buttons in Dreamweaer
Hi Everyone
I am having troubles with my buttons in Dreamweaver, I created the buttons in Fireworks, when I preview the buttons in a browser in Dreamweaver, they show a "no image" sign when you click on them. I am not sure if its a problem with my states or maybe if its a script. Please HELP!
Dreamweaver and Firworks ButtonsHi Ben
I changed the instance names and the directory folder, but it still shows that "no image". Here is a screen shot of the buttons:
Here is the updated code:
<table style="display: inline-table;" border="0" cellpadding="0" cellspacing="0" width="900">
<!-- fwtable fwsrc="Buttons.png" fwpage="Page 1" fwbase="Buttons.gif" fwstyle="Dreamweaver" fwdocid = "531471546" fwnested="0" -->
<tr>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="31" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="104" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="37" height="1" border="0" id="undefined_2" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="1" height="1" border="0" id="undefined_2" /></td>
</tr>
<tr>
<td colspan="10"><img name="Buttons_r1_c1_s1" src="ButtonImages/Buttons_r1_c1_s1.gif" width="900" height="2" border="0" id="Buttons_r1_c1_s1" alt="" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="1" height="2" border="0" id="undefined_2" /></td>
</tr>
<tr>
<td rowspan="2"><img name="Buttons_r2_c1_s1" src="ButtonImages/Buttons_r2_c1_s1.gif" width="31" height="38" border="0" id="Buttons_r2_c1_s1" alt="" /></td>
<td><a href="index.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c2_s1','ButtonImages/Buttons_r2_c2_s2.gif','Bu ttonImages/Buttons_r2_c2_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c2_s1','ButtonImages/Buttons_r2_c2_s3.gi f',1);"><img name="Buttons_r2_c2_s1" src="ButtonImages/Buttons_r2_c2_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c2_s1" alt="" /></a></td>
<td><a href="support.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c3_s1','ButtonImages/Buttons_r2_c3_s2.gif','Bu ttonImages/Buttons_r2_c3_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c3_s1','ButtonImages/Buttons_r2_c3_s3.gi f',1);"><img name="Buttons_r2_c3_s1" src="ButtonImages/Buttons_r2_c3_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c3_s1" alt="" /></a></td>
<td><a href="peripherals.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c4_s1','ButtonImages/Buttons_r2_c4_s2.gif','Bu ttonImages/Buttons_r2_c4_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c4_s1','ButtonImages/Buttons_r2_c4_s3.gi f',1);"><img name="Buttons_r2_c4_s1" src="ButtonImages/Buttons_r2_c4_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c4_s1" alt="" /></a></td>
<td><a href="servers.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c5_s1','ButtonImages/Buttons_r2_c5_s2.gif','Bu ttonImages/Buttons_r2_c5_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c5_s1','ButtonImages/Buttons_r2_c5_s3.gi f',1);"><img name="Buttons_r2_c5_s1" src="ButtonImages/Buttons_r2_c5_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c5_s1" alt="" /></a></td>
<td><a href="desktops.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c6_s1','ButtonImages/Buttons_r2_c6_s2.gif','Bu ttonImages/Buttons_r2_c6_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c6_s1','ButtonImages/Buttons_r2_c6_s3.gi f',1);"><img name="Buttons_r2_c6_s1" src="ButtonImages/Buttons_r2_c6_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c6_s1" alt="" /></a></td>
<td><a href="notebooks.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c7_s1','ButtonImages/Buttons_r2_c7_s2.gif','Bu ttonImages/Buttons_r2_c7_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c7_s1','ButtonImages/Buttons_r2_c7_s3.gi f',1);"><img name="Buttons_r2_c7_s1" src="ButtonImages/Buttons_r2_c7_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c7_s1" alt="" /></a></td>
<td><a href="office.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c8_s1','ButtonImages/Buttons_r2_c8_s2.gif','Bu ttonImages/Buttons_r2_c8_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c8_s1','ButtonImages/Buttons_r2_c8_s3.gi f',1);"><img name="Buttons_r2_c8_s1" src="ButtonImages/Buttons_r2_c8_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c8_s1" alt="" /></a></td>
<td><a href="contact.html" onmouseout="MM_nbGroup('out');" onmouseover="MM_nbGroup('over','Buttons_r2_c9_s1','ButtonImages/Buttons_r2_c9_s2.gif','Bu ttonImages/Buttons_r2_c9_s4.gif',1);" onclick="MM_nbGroup('down','navbar1','Buttons_r2_c9_s1','ButtonImages/Buttons_r2_c9_s3.gi f',1);"><img name="Buttons_r2_c9_s1" src="ButtonImages/Buttons_r2_c9_s1.gif" width="104" height="36" border="0" id="Buttons_r2_c9_s1" alt="" /></a></td>
<td rowspan="2"><img name="Buttons_r2_c10_s1" src="ButtonImages/Buttons_r2_c10_s1.gif" width="37" height="38" border="0" id="Buttons_r2_c10_s1" alt="" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="1" height="36" border="0" id="undefined_2" /></td>
</tr>
<tr>
<td colspan="8"><img name="Buttons_r3_c2_s1" src="ButtonImages/Buttons_r3_c2_s1.gif" width="832" height="2" border="0" id="Buttons_r3_c2_s1" alt="" /></td>
<td><img src="ButtonImages/spacer.gif" alt="" name="undefined_2" width="1" height="2" border="0" id="undefined_2" /></td>
</tr>
</table>
I hope I did it right, Thanks -
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Only had my iPhone 5 a week and already I'm having trouble with the home button? Any soloutions
Sure. Take it back. If you got it from new it has a warranty.
Or describe the problem fully in case we can help. "Having trouble with the Home button" doesn't give much of a clue.... -
Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.
OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No! -
Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
Having trouble with the home button
I'm having trouble with my home button. It works when it wants to. Has anyone else had this trouble?
Try these three very basic troubleshooting steps and see if any of them help.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
This involves using fhe home button but try it anyway .....
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. If you have multitouch gestures turned on, you can swipe up from the bottom of the screen to get to the task bar.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again. -
I am having trouble with my links/websites having images attached to them. The place where the image should be is blank. For example, AARP has an A for its image. My storage website has a blank broken box where the image should be. I forgot I had trouble and had to reset Foxfire, this problem occurred after that reset.
cor-el,
Mixed content normally gives the world globe image, unless you are using a theme that uses a broken padlock instead. Maybe the gray triangle means invalid? I came across that in a few themes (what is invalid was not made clear), but those were not using triangle shapes to indicate that.
I came across that mention in one of the pages you posted:
* https://support.mozilla.org/kb/Site+Identity+Button
I cannot attach a screenshot because I have not seen a triangle of any kind in my address bar. -
WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...
You can try removing app then reinstalling. If that doesn't work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I'm having trouble with my Pages app. Over half of my document show that they are updating. I cannot open or delete the documents. Does anyone know a fix for this? Please help.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702http://support.apple.com/kb/TS1702
Cheers, Tom -
Since uploading to iOS 7 I have been having trouble with TV apps
Hi has anyone having trouble with the TV apps like hd cartoon or cartoon world for a few days now I have been have trouble watching the apps all seem in slow motion the mouths don't move with the voices I hope this isn't because I upgraded to iOS 7 ? Is anyone having the same trouble?
Hello Giojowade,
The article linked below can help step you through some troubleshooting steps that often resolve issues with apps installed from the App Store.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Cheers,
Allen -
Help - anyone else out there having trouble with the new OS system on their ipad 2? I am not getting mutliple copies of several apps ont he main page. They are "collecting: in a pike int he upper left corner and the original application icon is no lobger working. I have tried a hard sync, and that didn't help.
It should only be able to have one copy of an app on the iPad. Have you tried a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Do all the apps work ? In the past a few people have taken a screen shot of their iPad screen and that has then become their background picture - so some of the 'app's may actually be on your wallpaper picture and not actual apps. Have you tried changing the wallpaper to see if that makes any difference ?
Maybe you are looking for
-
How do I transfer photos from aperture and iPhoto to bridge?
How do I transfer photos from Aperture and iPhoto to Adobe Bridge. I am using Photoshop CS6. Many of my original photos were stored as raw files.
-
CF 9.01 Enterprise - multi-instance image problem
Have 9.01 enterprise running with 3 instances (sticky sessions) - the problem situation is as follows: eg. CFchart created on instance1, writes .swf to cache1. Print of chart writes .jpg to cache1, cfdocument shows that the image has expired - 1 to
-
I can't find 'Add all tracks' in the add to playlist section in iOS 7
what happend 2 adds l tracks' in the add to playlist section in iOS 7
-
Oracle install problem in linux
hi, cannot execute the Export command before running the command ./RUNINSTALL.SH Error is OraSID#export DISPLAY=ipaddress:0.0 cannot find the command but i can find the export command in sbin and also i checked echo$DISLPAY and got output as :0.0 and
-
Hi, I am able to open pop up, but i need to capture the event when user clicks on "OK" or "Cancel" button. How can do that. Below is my piece of code. data lo_window_manager type ref to if_wd_window_manager. data lo_api_component type ref to if_wd