HD frame sizes and pixel aspect ratios

I have 1920 x 1080 HD footage shot on the Canon 5D Mark II and trying to add some filters to it in AE and then render as a 1280 x 720 file. None of the DVC PRO HD presets seem to get me to this frame size and when I've rendered to that frame size the renders come out distorted, indicating to me that the pixel aspect ratio is off. The DVC PRO HD preset renders a 960 x720 movie. I've been told that these will play at 1280 x 720 but am nervous about this as the work is for an event and I don't want anything to go wrong. I can't figure out how to render a movie that has the right dimensions and the right pixel aspect ratio.
One workaround seems to be to render at 1920 x 1080 and import it into Final Cut and make it 1280 x 720 there. But of course this is an extra step.
Any advice out there? Thanks in advance,
Loch

I don't quite follow. Feel free to define a custom composition size as you see fit. Indeed AE does not provide presets for everything, but given the plethora of possible output targets, this cannot be the goal of such an exercise. You should only use the DVCPro preset, if you plan on roundtripping without modifying the resolution, i.e. writing the modified clips back to a tape with the same specs/ via the same deck. The more interesting question here is, whether the stuff will actually be played via such a deck on the event or if it e.g. will be output from a BluRay disc via a Playstation or something. In the latter case they'd probably even prefer it to remain at the original full HD res for output via HDMI without extra conversions, as the 960x res would be of no use to them...
Mylenium

Similar Messages

Aspect Ratio and Pixel Aspect Ratio

I am importing P2 footage and wondering what my sequence settings should be? As in Aspect Ratio and Pixel Aspect Ratio would need to be? Do I need to ask the DOP what settings on the P2 have been used when filming?

If you have FCP 6 then when you drop a clip into the timeline it will ask you if you want to configure the sequence to match...just click YES.
But you should know what format they shot. Find that out then choose the Easy Setup that matches, and make a new sequence. Or let FCP 6 and 7 do that for you, like I mentioned.
Shane

Yikes! Need to change pixel aspect ratio.

Hey folks, please be gentle, I'm really new to After Effects.
I created a fairly large composition in AE CS3. The dimensions are correct for the ultimate deployment (1536 x 680) but I've just discovered that my pixel aspect ratio was set incorrectly. I have it set to "D1/DV NTSC Widescreen (1.2)" and it needed to be set to "Square Pixels." So when I preview my project there are black bars top and bottom. When I change the pixel aspect ratio of my compositions to "Square Pixels" it literally cuts off my content on both sides. Gah. I don't have the time to rebuild the entire project!
Any suggestions? All help is much appreciated. Thanks!

Mylenium, thank you! Yeah, pixels are pixels, darn it!
Please let me just clarify ...
In my Render Queue I go to Output Module Settings and choose something like "JPEG Sequence" and render it out. (Will that make, like, a million individual files? I've got 3 compositions and they're all about 3 minutes long.)
Then create a new composition that is the correct size AND pixel aspect ratio.
Then import whatever was rendered out.
Sorry for the need for hand-holding!

DVCPRO HD 720P: pixel aspect ratios with still images from Final Cut

I am currently trying to get still images from a trailer I am working on with Final cut pro. The footage is DVCPRO HD 720P 24pn and the interlacing and pixel aspect ratios have been giving me a lot of trouble in photoshop. I am able to convert the PAR but it is for preview purposes only...? I need the file to be saved with the converted PAR. How do you do that???
Also, the de-interlacing filter on photoshop doesn't seem to help the quality of the photo.
Anyone have any ideas?
I have searched and searched and only found somewhat related questions, so maybe I am the only one trying to do this...

Why are you doing interlace if you have 720p?

Confused about pixel aspect ratio and video size

Hello,
I have edited a whole dvd full of video and exported it as MPEG-2 NTSC DV Wide - it says 720 x 480, 29.97 fps. I have brought these into Encore and am trying to make a menu but can't seem to get the menu size right. Since I chose the wide format when making the video, which aspect ratio should I use in Encore? It gives me a choice in the properties menu, but when I go to Project settings it says Codec: MPEG-2 Dimensions 720 x 480. Whenever I bring in a menu background from photoshop, it doesn't fit, and is further complicated by the pixel aspect ratio thing. I have no idea what my background size should be to make it fit properly - the templates seem to all be the 4:3 size. What size should I be using in Photoshop and which pixel aspect ratio?
Is my video codec going to cause me a problem in Encore? I assumed that most tvs nowadays are widescreen (at least not square), so I should do the video wide as well.
Thanks for any help! I am thoroughly confused.

Use a template menu from Encore's library. Then modify as you need. That way you know that it will be the right pixel size and par. You cannot made an incorrectly sized/par'd menu work by setting it to 16:9 or 4:3 in the menu properties. It must be correct, and if so, Encore will usually pick the correct setting.
The Encore project settings for DVD really have no choices: it has to be 720x480 for NTSC. There is no project setting for par. You have to create the menu correctly - just let Encore do that for you by using a template.
Was your video source widescreen? If so, then you'll be fine on your video. If not, you may need to sort that out also.

Pixel Aspect Ratio and ciphering type of footage-CS6

CS6- updated 12\18\13 V-11.03
Hi All,
A few questions about:
Pixel Aspect Ratio and ciphering type of footage. Bare with me as I touch on two different aspects of what I feel are related:
1. Setting up a Comp-
Having AE decide on the correct footage being used- Via >Import footage,.(to Folder) then drag it on, or into the 'make comp icon' where AE is supposed to do a 'best guess' for the comp settings. Be it square pix or otherwise. What are the second value in brackets ? See pic
2. Interpolation-
When using two diff footage sources- If using two different source footages in a comp. Is this where I should interplolate my footage to match the existing footage and the comp settings (If I have choosen NOT to pre-comp that secondary footage?)
3. Seperating fields-
How come footage that a camera manufacturer claims to be shooting in Progressive 30 or 24p is showing up as interlaced in my comp's CP? The manual to the cam says 30p or 24p or 60i The footage was shot at 30p (for sure)
Here is a screen grab of AE's 'best guess' of that footage, showing it with an UPPER field render; indicative of HD Interlaced footage and then in the inerpolate settings - 'kinda confirming it.
Now for the way out- Render:
4. If that is in fact Interlaced and I then want to reduce the size of that 1920 footage to 66% size... Do I need to do anything in particular at this point?
For some reason I am getting an error on my end when trying to export as an AVI and reducing size to 1280
5. Is this from the Field render of interlaced challenge?
I ended up with a couple of errors and then aborted the whole file and re-imported to start over with this error. Which happend again after a redoux
So I sent it over to Prem Pro to export those MTS Files as a movie and noted AGAIN the reference to Interlaced video. "upper and lower" Prem Pro was able to use the same MTS files and export a working movie. (so those files were not corrupt BTW) Yet Note PP's output reference to that footage again as Interlaced would be...
Thanks for any clarity on those "5" questions... NC

Thanks for the details Rick.
Thanks for the insight on #1
Ref #2, You should never change the interpretation of Pixel aspect ratio on footage unless you know for a certainty that it is wrong. For example, open Photoshop or Illustrator and create a new document that is 720 X 480 pixels and AE will always interpret the image as rectangular pixels because that is a standard rectangular pixel frame size.
Unless you specifically created the image in Photoshop with rectangular pixels it is square pixels so the interpretation must be changed to avoid distortion.
--Did you mean to write:
Unless you specifically created the image in Photoshop with SQUARE pixels using a rectangle layout? I am not trying to bust your blz here, I am trying to understand the unknown. (for me)
So it may very well be AE mis-guessing the footage and the Upper first is a mistake on AE's part and I need to test it to find out? On that note...
Ref#3, Separating fields must be done right. Some 1080P footage is interpreted as having fields. This may be incorrect and if there is a question you MUST test the footage. Test the footage by making sure that the fields are being separated
How do I make sure the fields are being seperated? Does the window as in pic two from the top of my post confirm that or is there another test?
Then I do the following:
then selecting the footage in the project panel and choosing Create Composition from Selection, then opening the Composition settings, doubling the frame rate and stepping through the footage a frame at a time. If the footage is really interlaced then each of the frames will be different. (IE: 29.94 to 59.94fps) OK
If the field order is reversed then motion will be in the right direction then reverse, then go back to the right direction. ---I did not understand? Are you referring to Upper and Lower reverse? Direction, as in fwd and back in Time line? Sorry unlclear on my end...
Oh and HFR footage? HFR? High frame rate??
One last thing, Do all cameras shoot anamorphic, or could they as AE is showing my MTS files; are Square? (1.00) Pic #1
@Dave- You -
At 1080, a lot of footage is interlaced, and evidently your camera made interlaced footage
Me- How do you know? because of the 2nd pic and upper field first indication?
You-Even if you know for a fact that it was shot 30p, the camera captures the entire frame... but it records it as two fields. They give it a fancy name: Progressive Segmented Frame.
Me- Is this typical false advertisement of the sales divison of brands like not telling you what CMOS or CCD is in a cam just slapping HD 1080p on the side of the box?
You-AE will treat it as an entire frame if you interpret it as having a field order of None.
Me- Won't that be a problem mis leading AE on an interpret?
Thanks Gents for the precise details.
Best
NC

Has anyone else encountered a problem with poster frames not recognising a video's pixel aspect ratio

I'm discovering a strange effect with some of the .mp4 videos I've upload into iBooks Author. They're Pal SD 4:3 .movs with a 16:9 pixel aspect ratio and they play out fine on the iPad. However the iBooks software seems to be ignoring the pixel aspect ratio of the poster frame. This leads to the situation.
1) When I drag my video into iBooks author all looks good - the video is 16:9 and if I choose to set a poster frame (or leave it at default) it looks 16:9 in the iBooks Author.
2) I preview my book and it opens in iBooks on the iPad. But now the poster frame aspect ratio is 4:3
3) I click on the video to start playing and it immediately jumps to 16:9 aspect ratio and plays out fine.
4) If it scroll down a couple of pages and then scroll back the video poster frame has now reset itself to 4:3
This sounds like a bug to me. Anyone else had it? Do you know if it's possible to report bugs without having a Developer licence?
Thanks for any help
Rob

While there is no formal bug reporting method similar to what devs have w/apps, iBA does have a 'Provide iBooks Author Feedback' menu item.

Export Frame - Pixel Aspect Ratio

The video in my timeline is 720 by 480 (1.2121). When I clip on "Export Frame" in the program window it exports a jpg that is 720 by 480 (0.9091)
I know I can right click on it and "modify - Interpret footage" and correct the pixel aspect ratio.
My question is "Why is it doing this and how can I correct it"?
Is their a setting I'm missing? Why does it change the pixel aspect ratio?

The jpeg is not square. The pixel aspect ratio would be 1 and not .9091, if it were.
I have two computers. On one the "Export Frame" exports the jpeg with the same pixel aspect ratio.
The other machine changes the pixel aspect ratio from 1.2121 to .9091.
I can't find any differences in my settings.

How do I change a pixel aspect ratio from HD 1920x1080 frame rate 25 to NTSC 640x480 frame rate 29.97

I upload files to a tv channel, but for them to air, they need to have a NTSC 640x480 pixel aspect ratio with a frame rate of 29.97. I currently have a .mov file HD 1920x180 frame rate 25. I deleted the original unedited files so all I have is the .mov file. I need to make my file NTSC 640x408 frame rate 29.97
Thanks please answer ASAP

If you aren't entirely happy with the image quality you get from this in FCP. consider buying Compressor ($49). Down-converting from HD to SD often introduces artifacts. Compressor has a resize filter that does a good job of minimizing those artifacts.
Russ

Change Pixel Aspect Ratio Once Already Started?

I've been having trouble with my video looking extremely blurry -- I thought it had to do with rendering but it looks the same rendered as it did before rendering. I think I figured out that it has to do with the pixel aspect ratio being too small (or is it frame size, or are those the same thing? It's all very confusing for me!). The final output for this video is YouTube, but it also looks blurry within Premiere (mainly when stretching the Program Monitor so I can see it larger).
I helped on a video a few months ago that looked perfect, everything was really crisp in Premiere (after rendering, that is) and when exported to YT. The pixel aspect ratio was 1920x1080 for this video, and the one I'm working on now is 720x480.
So, can I enhance the pixel aspect ratio of the video I'm working on now? If I'm not able to change the pixel aspect ratio once I've started the project, what would be your advice going forward?
Thanks, and please let me know if you need any more information!

You need to be sure your sequence setting matches
the frame size and aspect ratio of your source media.
To create a sequence that matches your footage, try this:
Once you have created a properly configured sequence,
you can copy (Ctrl+C) then paste (Ctrl+V) your already edited
clips into the newly created sequence.
Also:
Changing a Sequence to Match a Clip
http://www.video2brain.com/en/lessons/changing-a-sequence-to-match-a-clip
Create a sequence
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml#WSd79b3ca3b623cac941d41a681247d1f35a4-7fff
What's the best export format or codec?
http://www.video2brain.com/en/lessons/whats-the-best-export-format-or-codec

Premiere exports in incorrect pixel aspect ratio

My Panasonic camera shoots quicktime .mov JPEG videos in a 720X408 px resolution. I am having a very hard time editing them in Premiere, because I cannot get it to export them in a correct pixel aspect ratio.
Maybe you can figure out what I'm doing wrong. Here's what I do.
First, when opening a new project, the closest frame size I can choose is 720x480. So I choose that. I import the .mov file into it, and put it on the time line. At that point it looks like this:
http://img291.imageshack.us/img291/812/premierewindowoc9.jpg
Correct aspect ratio and no deformation.
When I try to export it as a .mov file, I do the following: I click on settings (in the file save dialogue), and go to video settings. I can choose any pixel aspect ratio, it all produces the same results, but for example, let's say, DVCPRO (1.5) (that's the closest to the size I need).
I can manually set my frame size to be 720x408 px, assuming that now the frame size will be exactly the same size as my video and no deformation will occur.
However, the result I get is this:
http://img6.imageshack.us/img6/6730/exportedmoviehl5.jpg
I've drawn arrows on that to make it clearer. So, I have a movie that's 720x408px. Premiere exports a frame sized 720x408, but then for some strange reason shrinks the actual video down to 483x480!!??!! Leaving completely unnecessary black bars on the sides.
Why does it do this?
When I export it with frame size 720x480, it doesn't add black lines on top and bottom as you'd expect. It does exactly the same thing you see in the image above.
I have tried many other combinations too. I have tried exporting it as every other available pixel aspect ratio, also as an avi file, nothing makes any difference. It always shrinks the original video in width, and adds black bars to the left and right.
What am I doing wrong??

Tina,
Lets see if we can get kitty onto YouTube.
There are four issues, that you will need to overcome:
1.) Project Preset to begin. Stanley lists the possible choices in post #8, based on the specs of your camera. You will have to determine which of these you used to record the files. These are *probably* set in your cameras menu area, and if you have not changed them, are probably still set. That will get you started in the right direction - but wait, theres more...
2.) It seems that your camera uses Motion-JPG as the encoder to create these files. There are at least two good Motion-JPG CODECs available, Lead and Morgan. Plus, your camera may well have come with its own Motion-JPG CODEC. The CODEC is what allows your camera to encode/compress the video data, and also what allows programs like Premiere to decode that data. Did your camera come with a CD/DVD with software on it? If so, the installation of that software *should* install any proprietary CODECs to your system. Now, if this was the case (or soon will be the case, when you locate that CD/DVD), Premiere *possibly* will be able to use that CODEC to handle the footage from your camera. If it does not, then it is *possibly* only a matter of purchasing, downloading and installing one of the two mentioned Motion-JPG CODECs. Both are relatively inexpensive, and Premiere *usually* can work with either, though your exact footage might not permit this. This is usually because a camera mfgr. chose to do their own thing. Thats why any disc that came with the camera is the first place to start.
3.) Now, you are in Premiere, have the proper CODEC installed on your system, and have Imported the footage into a Project with the proper Presets. If all is working, and I hope that it is, you just edit your footage.
4.) You have been working with Presets established based on your footage. That is likely not exactly what you will want to upload to YouTube. This is where Export comes into play. Unfortunately, YouTube seems to change the specs. weekly. About the time that someone publishes fool-proof details and settings for YouTube, they (YouTube) change everything. The best advice is to search as many fora, as you can for Export Settings for YouTube. Look at the dates for all articles. You really will only care about the most recent - very recent.
Going back up the list, there is another possibility. That would be to use a 3rd party conversion program to convert your footage to a DV-AVI Type II file. Often, with the proper CODEC installed, Premiere can do this internally, though not always, and even when it works, there can be problems. I use DigitalMedia Converter (Deskshare) a shareware program for most of my conversions. There are many freeware, and shareware, conversion programs available. Many get mentioned in this forum. Many get glowing reviews. Some are easier to use, than others.
Some balk at the thought of owning Premiere Pro and then having to use some 3rd party software to get their footage into a robust NLE, that they paid good money for. The fact is that Premiere Pro was designed to work primarily with DV-AVI Type II files, from mini tape cameras - the point made by several. That does not mean that it cannot work with other file types. It does, though not always without problems. Sometimes just passing the material through a conversion program will clear up all problems and no one is the wiser. I often use Premiere Elements, Pros little bitty brother, to convert some file formats, because it is more tolerant of many of these, than is Pro.
Good luck, and sorry that I do not have a current suggestion for Export to YouTube. Since it is a hot distribution medium, you should have no problem finding the correct settings for today - be sure to check the date of all articles, as the specs change all the time and in a heartbeat.
Let us know if you have any more questions. For "how things are done in Premiere," I recommend the Premiere-wikia: http://premierepro.wikia.com/wiki/Main_Page
for tutorials. Most that you could want to do will be there someplace. The current YouTube setting might be an exception, just because every time the Wikia gets updated, that info is out of date.
Hunt

Pixel Aspect Ratio within projects

I am trying to bring in an entire timeline of video(only :90) to another timeline. However each one has different sequence settings. The original one has settings like this:
Frame Size: 1920x1080 HDTV 1080i(16x9)
Pixel Aspect Ratio: Square
Timebase: 29.97
Anamorphic 16x9 not checked
The one I am trying to lay into that timeline is:
Frame Size: 1440x1080 HD (1440x1080) (16x9)
Pixel Aspect Ratio: HD (1440x1080)
Timebase: 29.97
Anamorphic 16x9 not checked
I tried to simply copy this last timeline and paste into the original sequence and it didn't match up. How can I sucessfully do this?
Scott

Here's the trick. Create a new sequence with the desired setting. Select the first clip in the old sequence and hit "f" This loads the clip in the viewer with the in and out. Edit into the new sequence. FCP should automatically adjust the clip to match the sequence pixel settings. Repeat for each clip in the original sequence.
There are otherways to do this, but this may be the simplest to explain. Try it and if you have problems, post back.

Pixel/Aspect Ratio Problem

I'm midway through a huge project utilizing about a hundred stills in NTSC SD. I needed as much screen real-estate as possible for this so I used the D4/D16 Anamorphic pixel aspect ratio in Project Properties. My problem is that because I don't have a Kona or Decklink card, I don't have any preset codecs for this aspect ratio when I take it into FCP 5.1. The result is a squished widescreen frame when I output it from Motion to FCP. Not sure how to resolve this. Do I give it a custom frame size in FCP or what? Also, because this is all photos and graphics made within Motion, what's my best option in terms of quality for export from Motion to FCP? I'm assuming 8-bit or 10-bit uncompressed, but that's just a guess. Or is there a codec within Motion that I can export it as and it will come out in the correct aspect ratio in FCP?

Then I'm thinking you want to use an anamorphic widescreen format in FCP that you can then set up in DVDSP and presumably project or display on a widescreen TV...
Patrick

The (new) Premiere pixel aspect ratio is wrong for my PAL DV cam footage

I've had a Sony TRV-950E DV-cam since 2003. I've been shooting DV PAL in widescreen.
I just bought Elements 12 to edit my footage, and discovered that the pixel aspect ratio for D1/DV PAL Widescreen has been updated to 1.46 (old value 1.42).
The theory behind this change is that video recorded on 720x576 is slightly wider than 16:9 and that the 16:9 portion is 704x576.
Unfortunately this is not correct for my footage! I've captured the video from my DV-cam (by firewire) and opened it in Premere and it is streched to be shown as 1050x576.
So I did a test:
I filmed a steady shot of a perfect circle and captured the video from the camera and opened it in Premiere. The pixel ascpect ratio 1.46 makes the display 1050x576.
The question is: Am I seeing this displayed as a perfect circle now?
This can be tested:
I make a picture of a perfect circle in Photoshop (square pixels) with size 1024x576. I imported this picture into the Premiere project, and match the two circles: The filmed one, and the Photoshop one.
They DO NOT match! The one on the video is slightly stretched in width.
So then I stretch the Photoshop picture in width to become 1050x576. I then import this picture into the project. And now I have a perfect match between the circles!
This means that my DV camera actually records a 100% 16:9 picture on all the pixels 720x576 - and not a slightly wider picture with the 16:9 part being in 704x576 (which is the reason for the change in pixel aspect ratio from 1.42 to 1.46).
I have some HD scenes that I want to import (and downscale) into my SD project also, and I also have a lot of still pictures.
Unless I can change the setup i Elements to the correct ratio 1.42, these stills and sqare-pixel-video (HD) should ideally be streched from 1024x576 to 1050x576 to match (become equally stretched as) all the SD footage.
How do I solve this?
I just bought Elements 12 three days ago.
(I just tried opening the captured video in Windows Movie Maker - and that program must use pixel aspect ratio 1.42 since the video is diplayed correctly as 1024x576 with a perfect circle)
Regards,
Tom from Norway

Tom
After much thought and exploration and experimentation, I have come to the conclusion that there is no practical purpose for doing anything other than importing your media into the project and editing/exporting. I find no distortion in doing so, be it in the video samples that you posted or in still models that I created for the pixel aspect ratio 1.422 vs 1.4587 for D1/DV PAL Widescreen.
If you have not already, please read the following about the Adobe DV Widescreen Pixel Aspect Ratio change from 1.422 to 1.456.
Please start in the first link which gives some get subsequent links in it
http://forums.adobe.com/thread/673877
http://www.mikeafford.com/blog/2009/03/pal-d1-dv-widescreen-square-pixel-settings-in-after -effects-cs4-vs-cs3/
Also, you may find the following article on square and non square pixels of interest. It uses the PAL DV Widescreen 1.422 pixel aspect ratio in its discussion.
http://library.creativecow.net/articles/gerard_rick/pixel_madness.php
Aside from the explanation for the rights and wrongs of the matter, this is what I actually observed taking your PAL DV AVI Widescreen and PAL MPEG2.mpg Widescreen into the same Premiere Elements 12 Windows PAL DV Widescreen project. Along with your video files were still images that I created in Photoshop Elements 11 Full Editor:
1024 x 576 document with a red circle on Layer 2 of the Layers Palette
1050 x 576 document with a red circle on Layer 1 of the Layers Palette.
The red circles were superimposed in creation. The difference in the pixel dimensions between the two are evidenced by Layer 1 content peaking through on the left and right.
The gpsot readout for pixel aspect ratio for each of the videos was
a. Your PAL DV AVI 720 x 576 Widescreen = 1.422
b. Your PAL MPEG2.mpg 720 x 576 Widescreen = 1.422
Each of the Photoshop Elements documents (circles) saved as .psd files 1050 x 576 pixels.
When all were taken into Premiere Elements 12 project manually set for PAL DV Widescreen, they looked like the following, no display of distortion.......
PAL DV AVI Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
PAL MPEG2.mpg Widescreen 720 x 576 (now the pixel aspect ratio in Premiere Elements 12 Properties was shown as 1.4587, not the 1.422 seen in gspot before import)
Edit Menu/Preferences/General with check mark next to "Default Scale to Frame Size" was in effect.
As for the red circles stills (1050 x 576 to equate to the square pixel version of 720 x 576 widescreen) did not distort when brought into the Premiere Elements 12 Edit area monitor which is established by the PAL DV Widescreen project preset with the pixel aspect ratio = 1.4587.
The jpg version of the Photoshop Elements document (.psd) 1050 x 576 pixels (square pixels) looked like:
And, when this Timeline was exported Publish+Share/Computer/AVI with the DV PAL Widescreen preset, there was no distortion in the export. It looked undistorted as it did before export.
So, unless I am overlooking a key point here, I cannot see a reason why you cannot use the video sources that you presented for sampling as weil as stills with the 1050 x 576 pixel dimensions.
The only time I see any distortion possibilities is if you use a player that does not recognize the 16:9 flag that stretches the 720 x 576 to 1050 x 576 for display after encoding.
Trying to convert Premiere Elements 12 which uses the 1.4587 pixel aspect ratio for PAL DV Widescreen into a Premiere Elements 7 which uses the 1.422 pixel aspect ratio for PAL DV Widescreen is up hill in spite of creative thinking on your side.
Please review and let me know if you are seeing another different from what I am reporting with the samples that you posted.
Thank you.
ATR

H.264 pixel aspect ratio problem after update

Yesterday I updated Premiere Pro CC and Media Encoder CC to version 2014.2. But now I am having pixel aspect ratio problems with the H.264 codec when I export a 1080i50 sequence to PAL widescreen. The problem also seems to occur with other frames sizes.
I am using the same settings as usual with Aspect set to: D1/DV PAL Widescreen 16:9.(1.4587). However, VLC and Windows Media Player play the video with a 5:4 ratio. So it looks like the pixel aspect ratio information is not passed to Media Encoder or to the file.
This problem does not affect other codecs like AVI or MPEG-2, these are correctly displayed.
Is there anyone else having this problem? And more important, does anyone know a solution?

When creating files for computer/online playback (not editing), then best practice is to simply use square pixels with 1.0 Pixel Aspect Ratio, which will ensure that ALL players correctly display your video, no chance of problems.
Export as 1024x576 with 1.0 PAR and that is the square-pixel equivalent of PAL DV widescreen.
For NTSC users, I've seen it two ways, either 864x480 or 854x480.
Merry Christmas
Jeff Pulera

HD frame sizes and pixel aspect ratios

Similar Messages

Maybe you are looking for