HDMI signal not compatible with my Sharp TV

After the recent updates of my playstation 3 firmware, the HDMI signal is not compatible anymore with my Sharp Aquos LC-42A65M keeping in mind that I've tried video reset options, factory reset for both TV and PS3, changing HDMI cables, using different HDMI ports. My tv set works with any HDMI connection from other devices but PS3, and at the same time tried PS3 on other TV set and it works fine..I've searched the Internet for long time for any solutions but failed so far. My question: How can i make ps3 HDMI signal compatible again with that particular tv set. And by the way both were working together without any problems before the updates.

Hi,
g series has dozens of models, which one is yours ? Re-enable HDMI sound may help.
Right click the speakers icon,
Select Playback devices,
Right click HDMI sound,
Enable it.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Got the message "not compatible with this signal" on TV when connecting ATV to HD TV.

    I got the message "not compatible with this signal" on TV when connecting Apple TV to my Sharp HD TV.

    Go into safe mode an uninstall this new game.
    If this doesn't work, uninstall the graphics driver so Win will install it again after restart.
    HTH
    V.
    *** Say 'Thanks' with Kudos ***

  • Mail app deleted and reinstall wont open, says not compatible with OSX

    i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)

    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks.

  • I have Trend Micro antivirus for Windows 7, but I am being told it is not compatible with Mozilla 9.1, how do I get an older version or adapt?

    I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.

    See:
    * http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632

  • I have installed Firefox4 to find it is not compatible with my version of OSX how do I get version 3.6 back or do I just give up and use Safari?

    I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!

    Go to this link and find your language:
    http://www.mozilla.com/en-US/firefox/all-older.html

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

    I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
    XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
    Another message they get is:
    AutoConfigAlert:
    Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
    This is on Windows XP

    Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20

    Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
    Platform version '1.9.2.18' is not compatible with
    minVersion>=1.9.2.20
    maxVersion<=1.9.2.20"
    That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?

    You're welcome

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • I'm getting this error statement: XULRUNNER error: platform version 6.0.2 is not compatible with min etc max etc6.0.1 - what is this about and how can it be corrected?

    This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
    XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
    What is this about and how can I retsore access to Firefox on my pc?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

    How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

    How to Downgrade OS X Yosemite Back to OS X Mavericks

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • Cannot install Logic from DVD version 9.0.0. because it is not compatible with the latest OS 10.8.3

    As I tried to install Logic 9.0.0 the OS comes out with a message saying that the OS is not compatible with this version of Logic.
    I have Logic conventional DVD Software package.
    How can I get this done?
    Any help, I appreciate!
    Thanks!

    No, the message prevents me from installing.
    Now, I took the App Icon from my Laptop which has the latest Logic Update installed and throw it in my new iMac's Application Folder. It seems to work OK.
    What I havent installed are the Additional Content and all the DVDs that come with Logic.

  • I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on.  The Tech told me to

    I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion.  Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine.  Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer.  I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs.  Also the computer keeps freezing up when it is in the sleep mode, etc.
    When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it.  Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • Photoshop CS2: "file not compatible with this version of Photoshop" error

    So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
    Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
    OS: OSX 10.4.11
    Photoshop CS2
    Info:
    Kind: Adobe Photoshop file
    Size: 394.4MB
    Created: December 13, 2007
    Modified: Yesterday at 3:54 PM

    This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please
    cease and desist immediately
    in the event you are currently experiencing problems with one or more files.
    Working across a network is not supported.
    See:
    http://www.adobe.com/support/techdocs/322391.html
    Copy the
    CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
    Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
    not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
    If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

Maybe you are looking for

  • File adapter issue - files not processed (file name mask is *)

    Hi guys! I have a problem I never faced before. My file adapter doesn't process files in the source directory. When I put there exact file's name, it is processed. But when I use * , nothing happen. This is very strange. I was wondering, if problem c

  • Glossary entry from caption?

    The HELP file says: "You can add graphics, movies, and other media to glossary entries-" but I don't think you can. I would very much like to do that-to make links from photo captions to information in an index-but the "add term" option is grayed out

  • Table Visibility

    I have two tables, in the init of the view it's only visible the first one, when I select a row I want to change the visibility of the second at the event onleadSelection. I know that I have the wdDoModifyView method but I don't know how to use it in

  • Command I doesn't work.

    In Finder, when I press +I it doesn't display anything. Shouldn't it display informations when I do that on a file or my HD? I don't know what to do. Thanks.

  • How can ID automatically change the business system while importing?

    Hi gurus, There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+). You know we have to create the scenarios manually in Integration Directory since the business system is different. The question is