Header detail is displayed strangly.

On my Mac BookPro, the Header Detail in MAIL is screwed up. When I read mail the "From" field overlaps the "Subject" field, making it impossible to read who the e-mail is from. In Mail preferences, you can choose different Header Detail formats, under Viewing. However, no mater what I pick the fields still overlap. The"Return Path" field is also overlaping something. I can't read the text to tell what it is. This doesn't happen on any of my other Macs.
Any clue as to What I can do to fix this?

First of all I'd like to excuse me for my english. It might be a bit ... rusted.
I happen to have the same problem as Steven. Although it should not be the Helvetica because I am using Tahoma in my mails.
I am running Suitcase on my computer and Tahoma is enabled.
I think there must be some problem between Mail and Suitcase because this problem came up after I installed Suitcase some days ago.
In the beginning I could solve the problem of overlaping lines by changeing and rechangeing the displayed font. But now this trick won't work anymore.
Maybe the problem is that Tahoma is located in User/[name]/library/fonts?
Does anybody have an idea?

Similar Messages

Header Details of Actionable Message

Hi,
Can it possible to remove actionable message Header details while displaying message details?
Madhu

Venkata,
Please let us know if you still need help w/ this post.
Thank you.

Issue in displaying header details in ALV report

Hi,
I have used slis_t_listheader and REUSE_ALV_COMMENTARY_WRITE to display the header details in ALV report.I want the details to be displayed as below.
Requester : ----------------------                                                                               Page: 1
Program: -----------------------                                                                                Date:---------
                                                                 Title of Report
But when I use the structure slis_t_listheader to display the header details,all the fields are coming one below the other.
How can I get the fields as shown in the above format
Edited by: Abaper12345 on Jun 25, 2009 7:54 AM

Hi,
Go through following code... its showing the data exactly the way you want....
REPORT TEST3.
TYPE-POOLS:slis.
TABLES:MARA.
*Type Declaration
TYPES:BEGIN OF t_mara,
      matnr TYPE mara-matnr,
      ersda TYPE mara-ersda,
      ernam TYPE mara-ernam,
      END OF t_mara.
*Internal Table
data:it_mara type standard table of t_mara.
*Work Area
data:wa_mara type t_mara.
DATA:i_repid TYPE sy-repid .
i_repid = sy-repid.
*Declaration for field catalog
DATA : fcat TYPE slis_t_fieldcat_alv,
       wa_fcat TYPE slis_fieldcat_alv.
*Declaration for Layout
data : WA_LAYOUT type SLIS_LAYOUT_ALV.
*Initializing ColumnWidth_Optimize For Layout
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
START-OF-SELECTION
START-OF-SELECTION.
*Fetching data into internal tables
PERFORM get_data.
*Buil Fieldcatalog
PERFORM build_fcat.
*Display ALV Report
PERFORM alv_display.
*Build Fieldcat
FORM build_fcat .
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Material Number'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERSDA'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Date'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERNAM'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'User'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
endform.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
form GET_DATA .
select matnr ersda ernam from mara into table it_mara.
endform.                    " GET_DATA
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
form ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = i_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = fcat
TABLES
    t_outtab                          = it_mara
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " ALV_DISPLAY
*&      Form html_top_of_page " I_CALLBACK_HTML_TOP_OF_PAGE "
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
CALL METHOD document->add_text
EXPORTING
    text          = 'Program'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_text
EXPORTING
    text          = 'Requester'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_gap
EXPORTING
     width      = 125
CALL METHOD document->add_text
EXPORTING
    text          = 'This Is Test Data'
    sap_color     = document->list_group
   sap_fontsize = document->LARGE
   sap_fontstyle = document->standard
   sap_emphasis = document->strong.
ENDFORM.                    "HTML_TOP_OF_PAGE
Thanks & Regards
Ashu SIngh

Header and Item text details not displaying in Capital and Import PO......

Hi Abapers,
           I copied the standard PO /SMB40/MMPO_A to ZForm, and customized like changing logos,address,footer etc.., after activating the form and while print previewing the standard purchase order all details displaying including header,item,terms of payment,delivery schedule.
         But for Import and Capital PO, the header,item,terms of payment,delivery schedule,etc.., details not displaying nor printing in the form.I didnt changed or customized the above windows in the form, but the above details want to display in the form for Capital and Import PO.
         I am getting all the details for Standard PO, but not for Capital and Import PO.
Let me give some suggestions for the above issue.
Thanks & Regards,
Dilip.B

Hi Surya,
                   Thanks for your reply.
I am using only one form for all the PO document types, and there is no codes with conditons blocking for Capital and Import PO's.
I am using the standard Purchase Order for this.
I checked the standard smartform, and their is no condition for blocking import and capital PO texts. The below is the code written for retrieving header text in smartform header window..,
* read IMG setting -- table T166K
* append texts allowed to GT_HD_TEXTS
* Head Text Part
CLEAR LS_TEXT.
LOOP AT LT_TEXTS INTO LS_TEXT.
SELECT SINGLE * FROM T166K INTO LS_T166K
WHERE DRUVO     = IV_DRUVO AND
BSTYP     = IS_EKKO-BSTYP AND
BSART     = IS_EKKO-BSART AND
TDOBJECT = LS_TEXT-TDOBJECT AND
TDID      = LS_TEXT-TDID.
IF SY-SUBRC = 0.
APPEND LS_TEXT TO GT_HD_TEXTS.
ENDIF.
CLEAR LS_TEXT.
ENDLOOP.
Thanks & Regards,
Dilip.B
Edited by: Dilipkumar B on Oct 22, 2009 7:58 AM

How to NOT display header details in every page when printed with PLD

Hi All
I am printing a report of all related activities of a business partner using PLD. in the printout the header details of business partner such as name, phone details are printing in every page along with contents. how to avoid this situation printing the header details in everypage except first page?
SV Reddy

Hi,
Add a formula field to the page header. The formula field will need to contain the following text on the Content tab.
CurrentPage()
Add another formula field, once again add the following to the Content tab
Field_101=='1'
in the example above, Field_101 is the field id for the first formula field you added.
Now all you need to do is link the fields that you only want printed on the 1st page to the 2nd formula field you added.
Regards,
Adrian

SMS text message header does not display sender information

When I receive a text message the only header information that displays is the date and time. The senders information does not display. The lines are not even there. There is no way to reply to a text message or tell who the sender is. This problem is only with SMS messages. Regular email headers display just fine. I have done a wipe, reset, reload, everything possible with no luck. I am the only one in my office with this problem. I have not been able to find any information or postings from anyone having the same problem. I can read the text message, but there is no header (except for the date and time). Any thoughts?
Blackberry Curve 8350i

I was able to resolve the problem by uninstalling the Blackberry desktop manager software and reinstalling it selecting Internet Email vs. Blackberry Enterprise Server. If you get to the screen that asks you to choose which type of email service you use and you accidentally choose the wrong one your phone will work but will do strange things, including sending all sorts of redirect emails. For me, this seemed to do the trick.

ALV list Header details scattered

Hi All,
I have a ALV-LIST report output but the header details displayed are scattered in output. Can you suggest how to align all deatils properly aligned.

Hi again,
1. first of all how are u writing / displaying
   the alv header ?
2. using documentary write ?
   then also, u can use one variable of
length 100 and use this concept.
3. If u are using top_of_page
event,
in this event, WE CAN use WRITE.
(i have used it, and it
works fantastic)
              (not in case of alv grid)
4. My point is, what ever u are using,
   use on variable of length 100.
WRITE value INTO variable.
using offset
and then proceed further.
regards,
amit m.

Strategy for implementing drpdownlistbykey in header / detail relationship

Quite often I have header details relationships that I want to display. The volumes of data are typically small, so rather than make multiple trips to the database I choose to load all the data into context during the init routine. Implementing an efficient way to dispay this data and keep the header details relationship syncronized on the screen is where I am looking for suggestions.
A good example would be selecting a user from a list and displaying details of that user in a series of text views.
Currently to implement this, I load all the user detail into separate elements within a node. Simultaniously I load a value set with key information which is then used by a drop down list. A series of text views are bound to attributes in the context outside the detail node. These attributes contain the currently selected user detail information. When a user is selected from the drop down list, the select event fires, and a search is performed of all the detail node elements for that key. Once found, the user detail information is copied from the appropriate element to the corresponding 'current value' attributes.
This process seems a bit cumbersome to me. I am wondering if there are more efficient ways to manage this routine scenario. Possibly there is a way of binding the text views directly to the attributes in the detail node and switching the element that is currently displayed? I am just not aware of any way to do that.
Any suggestions would be greatly appreciated
-Sheldon

Say you have a context node "Users", cardinality 0:N, with attributes like "Name" etc.
Use a DropDown<b>ByIndex</b> element, bind property "texts" to attribute "Name". Assign an empty action to the "onSelect" event.
Create a form for the details, bind the contained InputField, TextView, whatever to the attributes inside node "Users".
Then you can select a user from the dropdown list (which displays the user names) and the detail form automatically displays the data of the (lead-)selected context element.
Armin

Refreshing Header & Detail part in Screen

Dear Friends,
I've been facing the following two problems in the diaog program that I am developing:
In my screen I have header & detail portions. The header part contains fields e.g. contract no., transporter code, Date effective from, Date effective upto etc. that I pick up from transparent tables. To display the detail part I am using a table control that gets populated from internal table. Now when I save, the data gets saved successfully (both header & detail) and subsequently I am clearing the screen also but still I am not able to enter a new entry.There is no alternative other than to come out of the program & executing it once again.
Further if I change any entry in the header part (containing only fields) and save that updation doesn't get saved i.e.next time also it shows the previous values while in the detail part (table-control) the updation gets saved.
Waiting for your invaluable inputs..
Regards,
Alok.

Hi Alok,
Seems in your program.. After change in details part... while saving the modules written in PBO are retriving old values.
Please put some flag in PBO which will control it's execution. Ie. at 1st time when u fetch the data. It will set as "X' then for every next time when u change data in details... It will not fetch data. It will accept your own data in header.
Darshan

Header details in Reports

Hi all,
we are writing report using REUSE_ALV_GRID_DISPLAY.
We have to print some header information on top of the grid.We are writing this in TOP_OF_PAGE.
In the TOP_OF_PAGE we are using CL_DD_DOCUMENT for displaying the header details.
We are passing TOP_OF_PAGE to I_CALLBACK_HTML_TOP_OF_PAGE.
When i am taking the print of the report ,i am not getting the header details displayed. I dont know what is the problem.
reply ASAP.

Hi all,
we are writing report using REUSE_ALV_GRID_DISPLAY.
We have to print some header information on top of the grid.We are writing this in TOP_OF_PAGE.
In the TOP_OF_PAGE we are using CL_DD_DOCUMENT for displaying the header details.
We are passing TOP_OF_PAGE to I_CALLBACK_HTML_TOP_OF_PAGE.
When i am taking the print of the report ,i am not getting the header details displayed. I dont know what is the problem.
reply ASAP.

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Problem in mapping xml data with header details from IPM 11g to BPEL

Hi,
I want to map xml data as a supporting content from IPM application to BPEL.
My xml is
<?xml version="1.0" encoding="utf-8"?>
<DocumentFile xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://tempuri.org/Document.xsd">
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
If I remove header details from root element <DocumentFile> i.e. modified xml is
<DocumentFile>
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
it works fine but i need to pass header details as well.
Please suggest.
Thanks,
Priya

Hi Naveen,
In sxmb_moni the content transmitted to the adapter(RFC)is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
- <RECORDS>
- <item>
<FLOC>f1-01-01</FLOC>
<RFID_NO>I006</RFID_NO>
</item>
- <item>
<FLOC>f1-01-02</FLOC>
<RFID_NO>I002</RFID_NO>
</item>
- <item>
<FLOC>f1-01-03</FLOC>
<RFID_NO>I003</RFID_NO>
</item>
- <item>
<FLOC>f1-01-04</FLOC>
<RFID_NO>I004</RFID_NO>
</item>
- <item>
<FLOC>f1-01-05</FLOC>
<RFID_NO>I005</RFID_NO>
</item>
- <item>
<FLOC>f1-01-06</FLOC>
<RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
At r/3 side the field floc and rfid_no gets mapped to floc which is of char30
eg floc=f1-01-01I006
rfid_no=

Stats Tab in Header ( Purchase order Display )

Warm greetings,
In Purchase order display Stats Tab in Header ( Purchase order Display )
Purchase order consists of K & A (Account assignment category) K Stands for Cost center & A stands for asset
4 Qty for 500 = 2000
1Qty of Asset 5000/=
Here the total Value of the PO is 7000/=
Once the purchase order is created in status tab
Still to deliv : shows whole quantity of the PO Example 5Qty
in which 4qty to k( cost center) & 1qty to A( Asset)
But amount value shows only 2000/=
instead of 7000/=
Generally it should show as 7000/=
Help me out to fix this issue pleas,
Regards
Shamul heq

Hi,
pls check that the item which you are procuring for Asset is Non-Valuated.
Thats why it is showing amount as 2000 only.
Regards,
Rahul Patil.

In BDC VA02 i am uploading header details in BILLING PLAN tab.

Hi Friends,
In BDC VA02 i am uploading header details in BILLING PLAN tab.
I am having sales order no in flat file.
While i am clicking BILLING PLAN tab its showing 1 POPUP screen for Milestobe For billing plan (INPUT AS NETWORK NO).
Some sales order nos this popup is not coming.
How to code this bdc?

CLOSED

How to get the Change Document Header details for a given date

Hi All,
Can anyone help me on this Change Document Header details(CDHDR).
Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
Thanks in advance
Regards
Chakri

HI,
Go through the documenattion of the FM u can get the details.. and also where used list
Regards,
Nagaraj

Header detail is displayed strangly.

Similar Messages

Maybe you are looking for