Header in Command prompt

String ParseBat= "cmd /c start C:\\temp\\ps.bat \"" + file +"\" \""+logfile+"\""; From the above window C:\temp\ps.bat "InputFilename" "LogFilename" gets displayed as a header to cmd. But I do not want this to be displayed. Could anyone please tell me how do I do this.

Did you try to run "start /?" and read it's output? There is something about title...

Similar Messages

Unchanging header in command prompt window

I didn't really know where to ask this. I'm writing a text-based adventure game, like Zork. And in Zork and most games like this, there is a header(or whatever you want to call it) at the top of the window that displays information relevant to the game (location, score, #moves, etc.). As new text is displayed and the old text moves up, the header stays at the top and doesn't move. And I was just wondering how I could do this in Java.

Cifa wrote:
zilk wrote:
......... there is a header(or whatever you want to call it) at the top of the window that displays information relevant to the game (location, score, #moves, etc.). As new text is displayed and the old text moves up, the header stays at the top and doesn't move. And I was just wondering how I could do this in Java.My understanding is he wants something that will look like a command prompt to display game info. First of all you understanding is not correct. I don't know why this is so difficult for you to grasp. Based on your other thread you are obviously not an idiot but why you are persisting in advice for a solution that the OP _clearly does not want_ is beyond me.
Here is why I am right and you are wrong.
1) The title of this thread is "Unchanging header in command prompt window " Note the "command prompt window" part. The OP says in the subject what they are looking for and no Swing or other GUI components are in any way implied by that.
2) The first post says "I'm writing a text-based adventure game," which again is an indication. Now by itself it could mean a few things but in light again of "command prompt window" it's pretty clear what the OP is asking for.
3) And this is a big one so please pay attention. You offered advice in reply #1 assuming the OP wanted a GUI. Now again based on 1 and 2 I think it's reasonable for you to have known that that wasn't wanted but whatever you gave some advice. And the OP returned and said in reply #2 "No, what I need relates specifically to the command prompt." I honestly don't know how either the OP or I could be any clearer than that. No, not GUI. Wants something that works "specifically to the command prompt"
I mean really. This is very clear. The OP does not want to use Swing components_ .
I am not "forcing" the OP into any decision. If the OP decides to use Swing great. If they decide not to, also fine with me. I couldn't care less either way frankly. But I, and I alone, am giving the OP the only correct advice in this thread based on what the OP has clearly stated several times that they are looking for.
I have no idea why you are arguing with me. I don't know why you insist on saying that I am wrong, or implying that I am forcing the OP down a road they don't want to go. Your reply after my first reply with "And i don't quite agree with the previous post. " was a mistake. You were wrong. You are wrong. Just move on.

Silent installation for FMW products command prompt stuck!!

Hi All,
I am working on silent installation of Oracle FMW components, I am using the response file approach and Oracle Universal Installer. The aim is to integrate these installation commands to continuous integration tools like Jenkins/ControlTier.
When the installation finishes, the current shell still holds the prompt. I need to press ENTER to get out. The problem If I integrate them with this tools their flow does not end up, as command prompt does not return. In addition to that I need the returned execution status (echo $?) for evaluating the process.
I have tried launching it in background but did not work, any ideas ?
They say, silent does not require user interaction still we have to press ENTER to exit the console (silent + GUI).
Please suggest.
Thanks in advance,
Bhaskar
I am posting one of the application installation output to give a better idea(Oracle Webtier Utilities):
=========================================================
bash-3.2$ ./runInstaller -silent -responseFile /sarbackups1/infra_build/response/WebtierSOA_InstallOnly_11.1.1.4.rsp &
[1] 17055
-bash-3.2$ Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 3578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 28991 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-02-21_04-40-33PM. Please wait ..../runInstaller: syntax error at line 299: `count1=$' unexpected
Log: /u01/app/oracle/oraInventory/logs/install2012-02-21_04-40-33PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of 5.9,5.10
Actual Result: 5.10
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for SUNWarc; found Lint Libraries (usr)(SUNWarc). Passed
Checking for SUNWbtool; found CCS tools bundled with SunOS(SUNWbtool). Passed
Checking for SUNWhea; found SunOS Header Files(SUNWhea). Passed
Checking for SUNWlibC; found Sun Workshop Compilers Bundled libC(SUNWlibC). Passed
Checking for SUNWlibm; found Math & Microtasking Library Headers & Lint Files (Usr)(SUNWlibm). Passed
Checking for SUNWlibms; found Math & Microtasking Libraries (Usr)(SUNWlibms). Passed
Checking for SUNWsprot; found Solaris Bundled tools(SUNWsprot). Passed
Checking for SUNWtoo; found Programming Tools(SUNWtoo). Passed
Checking for SUNWi1of; found ISO-8859-1 (Latin-1) Optional Fonts(SUNWi1of). Passed
Checking for SUNWi1cs; found X11 ISO8859-1 Codeset Support(SUNWi1cs). Passed
Checking for SUNWi15cs; found X11 ISO8859-15 Codeset Support(SUNWi15cs). Passed
Checking for SUNWxwfnt; found X Window System platform required fonts(SUNWxwfnt). Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for 127111-02; found 127127-11. Passed
Checking for 137111-04; found 137137-09. Passed
Check complete. The overall result of this check is: Passed
Patches Check: Success.
Expected result: 1024MB
Actual Result: 16384MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (Web_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (Web_PIT3)
[CONFIG]:Create and Start OHS Component (ohs_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Provisioning OHS files for ohs_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Skipping ohs_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start OHS Component (ohs_PIT3)
[CONFIG]:Create and Start Web Cache Component (webcache_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Provisioning WebCache files for webcache_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Copying WebCache files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Customizing webcache.xml
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Skipping webcache_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start Web Cache Component (webcache_PIT3)
Configuration:Web Tier Configuration completed successfully
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD completed successfully.
Prompt holds here I have to press ENTER to come out
=========================================================

Hi All,
I am working on silent installation of Oracle FMW components, I am using the response file approach and Oracle Universal Installer. The aim is to integrate these installation commands to continuous integration tools like Jenkins/ControlTier.
When the installation finishes, the current shell still holds the prompt. I need to press ENTER to get out. The problem If I integrate them with this tools their flow does not end up, as command prompt does not return. In addition to that I need the returned execution status (echo $?) for evaluating the process.
I have tried launching it in background but did not work, any ideas ?
They say, silent does not require user interaction still we have to press ENTER to exit the console (silent + GUI).
Please suggest.
Thanks in advance,
Bhaskar
I am posting one of the application installation output to give a better idea(Oracle Webtier Utilities):
=========================================================
bash-3.2$ ./runInstaller -silent -responseFile /sarbackups1/infra_build/response/WebtierSOA_InstallOnly_11.1.1.4.rsp &
[1] 17055
-bash-3.2$ Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 3578 MB Passed
Checking swap space: must be greater than 500 MB. Actual 28991 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-02-21_04-40-33PM. Please wait ..../runInstaller: syntax error at line 299: `count1=$' unexpected
Log: /u01/app/oracle/oraInventory/logs/install2012-02-21_04-40-33PM.log
Copyright (c) 1999, 2009, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Expected result: One of 5.9,5.10
Actual Result: 5.10
Check complete. The overall result of this check is: Passed
CertifiedVersions Check: Success.
Checking for SUNWarc; found Lint Libraries (usr)(SUNWarc). Passed
Checking for SUNWbtool; found CCS tools bundled with SunOS(SUNWbtool). Passed
Checking for SUNWhea; found SunOS Header Files(SUNWhea). Passed
Checking for SUNWlibC; found Sun Workshop Compilers Bundled libC(SUNWlibC). Passed
Checking for SUNWlibm; found Math & Microtasking Library Headers & Lint Files (Usr)(SUNWlibm). Passed
Checking for SUNWlibms; found Math & Microtasking Libraries (Usr)(SUNWlibms). Passed
Checking for SUNWsprot; found Solaris Bundled tools(SUNWsprot). Passed
Checking for SUNWtoo; found Programming Tools(SUNWtoo). Passed
Checking for SUNWi1of; found ISO-8859-1 (Latin-1) Optional Fonts(SUNWi1of). Passed
Checking for SUNWi1cs; found X11 ISO8859-1 Codeset Support(SUNWi1cs). Passed
Checking for SUNWi15cs; found X11 ISO8859-15 Codeset Support(SUNWi15cs). Passed
Checking for SUNWxwfnt; found X Window System platform required fonts(SUNWxwfnt). Passed
Check complete. The overall result of this check is: Passed
Packages Check: Success.
Checking for 127111-02; found 127127-11. Passed
Checking for 137111-04; found 137137-09. Passed
Check complete. The overall result of this check is: Passed
Patches Check: Success.
Expected result: 1024MB
Actual Result: 16384MB
Check complete. The overall result of this check is: Passed
TotalMemory Check: Success.
Verifying data......
Copying Files...
-----------20%----------40%----------60%----------80%--------100%
Applying Oneoff Patch...
[CONFIG] Launching Config Actions....
Started Configuration:Web Tier Configuration
[CONFIG]:Create and Start AS Instance (Web_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Creating Oracle Instance directories...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Recording OPMN ports reservations...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Bootstrapping OPMN configuration files...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Instantiating opmnctl for direct usage...
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (Web_PIT3)]:Skipping instance registration
[CONFIG] SUCCESS:Create and Start AS Instance (Web_PIT3)
[CONFIG]:Create and Start OHS Component (ohs_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Provisioning OHS files for ohs_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Copying OHS files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Customizing httpd.conf
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Skipping ohs_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start OHS Component (ohs_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start OHS Component (ohs_PIT3)
[CONFIG]:Create and Start Web Cache Component (webcache_PIT3)
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Creating empty component directories...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Provisioning WebCache files for webcache_PIT3
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Copying WebCache files from ORACLE_HOME to ORACLE_INSTANCE locations
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Customizing webcache.xml
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Adding component's process control to OPMN...
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Skipping webcache_PIT3 component registration.
[CONFIG] [Web Tier Configuration] [Create and Start Web Cache Component (webcache_PIT3)]:Invoking opmn reload...
[CONFIG] SUCCESS:Create and Start Web Cache Component (webcache_PIT3)
Configuration:Web Tier Configuration completed successfully
The installation of Oracle AS Common Toplevel Component, Oracle WebTier and Utilities CD completed successfully.
Prompt holds here I have to press ENTER to come out
=========================================================

Create theme path using Command prompt & telnet?

Hey guys I want my SMP to display linksheets. I have the latest firmware installed. I have been successfully running GBBM off of a usb (using the latest wdlxtv firmware) & my linksheets display fine. However, some films stutter & pause when using wdlxtv (they play fine when I unplug the usb stick & run the official firmware). So my aim is to change the theme path so that GBBM is booted from my usb stick & I can display linksheets but I will be using the official firmware. I have been following this guide found on the forum: http://community.wd.com/t5/WD-TV-Live-Streaming/Getting-around-the-30MB-theme-limit-and-repointing-the-SMP-to/td-p/631463 After attempting to set the theme path I reboot my SMP but it is still at the default theme.
When I look under 'appearance', it states my theme path that I entered in Command Prompt.
I think that I may be entering the theme path slightly wrong.
My USb is identified as: /tmp/media/usb/USB210/4489-F8EA
The folder that I created on my USB was: wdtv_themes
So I assumed my theme path would be: config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA.wdtv_themes
However, this doesn't seem to work.
Any help?

this is all over my head, but KAD79 is about the only person that could help you with this but i did notice one thing, the path is missing a missing forward slash ? bird06 wrote:
My USb is identified as: /tmp/media/usb/USB210/4489-F8EA
So I assumed my theme path would be:config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA.wdtv_themes config_tool -c THEME_PATH=/tmp/media/usb/USB210/4489-F8EA/.wdtv_themes

Sound problem and command prompt problem

hi
My new cq40 610tu compaq laptop works with only left side speaker is it build with only one left side speaker? Is there no dual speaker? But with head phone two headphone speaker works properly. tell me details.
another problem when we open command prompt in winxpSP2 it is not stable after few seconds it turns off automatically. When I type large things in ms word 2003 cursor goes different place automatically. whats the problem?
I purchase this laptop just 15 days ago. What's the solutions?
thanks
Dhiman

Hi kbzone,
... there should difinitely be no sparks ) I recommend that you start with checking the wiring ... is the computer connected to earth, is the amplifier? Are they connected via the same power socket? Are you sure that the amplifier is OK?
Then, will it be possible to have any sound from the card if the amplifier is not used? You can try removing cards, uninstalling drivers and then re-install ...
It is well possible that by now you have damaged your soundcard, btw
Hans

Command prompt issue from VBscript

So I have this script that works perfectly for parsing out a COM number and then sending data to said COM port via the command line (things like 'ipconfig > //./COM15'). The issue is that it only works when I use the /K modifier which tells the command
windows to stay open. I don't want them to stay open, but whenever I remove the /K, it doesn't work. Nothing gets copied to the COM port. I suspect the cause of this is the command prompt closing before things like systeminfo can finish running. So is
there a way to have the command prompt window stay open for a short amount of time and then close?
'Part 1: FindCOM port
fileName = "C:\rtlstuff\COM.txt"
Set regex = New RegExp
regex.Pattern = "COM(\d+)"
regex.IgnoreCase = True
regex.Global = True
Set fso = CreateObject("Scripting.FileSystemObject")
Set file = fso.OpenTextFile(fileName)
text = file.ReadAll()
file.Close
Dim ComPort
Set matches = regex.Execute(text)
For Each m In matches
ComPort = m.SubMatches(0)
Next
'Part 2: Set file dictionary
set oDic = CreateObject("Scripting.Dictionary")
oDic.Add 0, "ECHO %DATE% %TIME% > //./COM"
oDic.Add 1, "ipconfig > //./COM"
oDic.Add 2, "systeminfo > //./COM"
v = 3
'Part 3: Set COM Variables
Set oShell = WScript.CreateObject ("WScript.Shell")
MODE = "MODE COM" & ComPort & " 9600,N,8,1,P"
oShell.run "cmd.exe /C" & MODE
'Part 4: Data transmission
Dim Command
x=0
do while x < v
Command = oDic.Item(x) & Comport
msgbox Command
oShell.run "cmd.exe " & Command
x=x+1
wscript.sleep 10000
loop

Can you help me with syntax? I'm still not hugely familiar with VB and I'm not sure how to set this up. This current iteration does not work.
'Part 1: FindCOM port
fileName = "C:\rtlstuff\COM.txt"
Set regex = New RegExp
regex.Pattern = "COM(\d+)"
regex.IgnoreCase = True
regex.Global = True
Set fso = CreateObject("Scripting.FileSystemObject")
Set file = fso.OpenTextFile(fileName)
text = file.ReadAll()
file.Close
Dim ComPort
Set matches = regex.Execute(text)
For Each m In matches
ComPort = m.SubMatches(0)
Next
'Part 2: Set file dictionary
set oDic = CreateObject("Scripting.Dictionary")
oDic.Add 0, "ECHO %DATE% %TIME% > //./COM"
oDic.Add 1, "ipconfig > //./COM"
oDic.Add 2, "systeminfo > //./COM"
v = 3
'Part 3: Set COM Variables\par
Set oShell = WScript.CreateObject ("WScript.Shell")
MODE = "MODE COM" & ComPort & " 9600,N,8,1,P"
oShell.run "cmd.exe /C" & MODE
'Part 4: Data transmission
Dim Command
i = True
x=0
do while x < v
Command = oDic.Item(x) & Comport
msgbox Command
oShell.run "cmd.exe " & Command , ,True
x=x+1
wscript.sleep 10000
loop

Query running on sql commands prompt not running on report region

Hi All,
Facing a weird issue now. I have written a report query which is running absolutely fine in sql command prompt but when i trying to run this as a report it is just processing and the report is not loading. What could be the reason behing this?
Thanks in Advance
Regards

Hi,
With no other information about the problem is hard to know what's happening. If you could at least provide us with the query then I think it would be easier for us to help you.
Regards,
Sergio

Unable to run discoverer report from command prompt

Hi,
I'm trying to run the discoverer report from command prompt and i need to schedule the same.
How could i pass multiple values for the parameters?
If i don't pass the optional parameters, the parameter screen is getting pop-up? How to skip optional parameters?
Also, how to pass the data ranges (format for date parameters) ?
I'm using the below command in command prompt:
cd/d E:\oracle\BIToolsHome_1\bin
dis51usr /connect username/password@database /opendb "TIMS-PCJ status Report" /sheet "TIMS observation status report (based on performed date)" /parameter "Test Number" 40351 /parameter "From Date" "01-JAN-2007" /parameter "To Date" "28-FEB-2007" /parameter "Observation Status" C /parameter "Observation Name" "Abdominal Girth" /export HTML "C:\DISCOVERER_REPORT_SCHEDULING\DIS_OUTPUT\PCJStatusOutput11"
Any one please reply me. Its very urgent.
Regards,
Sreedhar

Hi,
How could i pass multiple values for the parameters? You should be able to use a comma separated list e.g.
/parameter "Observation Name" "'Abdominal Girth','Abdominal Girth2'"
How to skip optional parameters?I don't think you can. You have to supply all parameters and then decode out the parameters you don't need in the workbook.
how to pass the data ranges You cannot pass a date range. You can pass a start and end parameters. The default format for the date parameters is DD-MON-YYYY but this can change depending on the NLS settings and format of the data item.
Rod West

Error 5: Access is Denied While using OSCDIMG to create Winpe x86 ISO with Deployment Tools Command Prompt

Technician computer is Windows 7 HP x64.
Running latest version of WAIK.
Goal: To make a Winpe disc for each processor architecture (AMD64, x86, IA64) with an included Gimage.exe using this code for the default startnet.cmd file found in system32 directory of winpe boot.wim
wpeinit
if /i %PROCESSOR_ARCHITECTURE%==amd64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==ia64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==x86 (
cd x86
start gimagex.exe
These are the commands I have processed for the x86 variant:
copype x86 c:\pe\x86\
Dism /mount-wim /wimfile:C:\pe\x86\winpe.wim /index:1 /mountdir:C:\mount
**It is at this point I copy over my x86 folder, x64 folder, and overwrite the startnet.cmd file.
dism /unmount-wim /mountdir:C:\mount /commit
oscdimg -n bc:\pe\x86\etfsboot.com c:\pe\x86\iso c:\pe\x86.iso
^^It is at this command I receive this error:
ERROR: Could not delete existing file "c:\pe\x86\iso"
Error 5: Access is denied.
Please note that all commands before were hand-typed, no copy or pasting from any directory or .chm
One thread referred to some Application Management service, but I can report that there is no such service installed in my machine.
Thank You!
UPDATE:
I copied the winpe.wim file from the x86 root directory into the iso directory and renamed it to boot.wim Now, if I copy the contents to a flash drive and put it into a client
computer, it boots to the PE perfectly, script and all.
However, when trying to use the oscdimg command, I do get an .iso successfully, but when I burn it, I don't know what to do in the way of boot options, and if I keep defaults (imgburn)
it results in an un-bootable dvd.
Suggestions are greatly appreciated.

Don't copy and paste instead type manually it will work.
[email protected]
OMG! Yes, you are correct ... but I have no idea why! I retyped the command line:
oscdimg -n -be:\winpe_amd64\etfsboot.com e:\winpe_amd64\ISO e:\winpe_amd64\winpe_amd64.iso
into Notepad, and then pasted it into the Command Prompt, and it worked!
Perhaps there must be some hidden characters included when pasting directly, even though I first pasted the command line into Notepad, and then into Command Prompt
(C:\Program Files\Windows AIK\Tools\PETools>).
I had to retype the command line in Notepad before copying and pasting, before it would work.
Wow, thanks!
Cheers, Navy Flyer

How to run a program as an administrator from within a non-elevated command prompt?

I have a project that is going to be running on a kiosk, and the user that is running the kiosk software is going to be restricted. I have an alternate administrator account, but I cannot seem to figure out how to open my program running as this administrator
user. I have tried to use runas, like so:
runas /user:admin kiosk.exe
However, when I try to run this command, it asks me for the password of the administrator account and my program doesn't open correctly. It fails to open at all. If I change the run as to a start command, then the program executes fine so its
not a problem with my software.
Is there a way to pass a password parameter to runas so that it will not prompt for the password every time? If there is not, can someone think of another way for me to elevate my process to administrator without being logged in as one through the
command prompt?

Hi KevinGEAR,
You want to allow the others without the administrator`s level to run this software and meanwhile the administrator is not logged in, right?
Here is an alternative solution :
1.To work with this solution, a built-in administrator account should be enabled and meanwhile you can create a standard account. The built-in administrator account is different from the administrator account you created.
To enable built-in administrator account:
Ways to Enable / Disable the Built-In Windows 7 Admin Account
http://social.technet.microsoft.com/wiki/contents/articles/3040.enable-disable-the-local-hidden-built-in-administrator-account-in-windows-7.aspx
2. Use the following code
runas /user:ComputerName\Administrator /savecred "Full path to program's exe file"
Here is a link for reference:
Elevated Program Shortcut - Create for Standard User
http://www.sevenforums.com/tutorials/193743-elevated-program-shortcut-create-standard-user.html
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best Regards

How do i get sql plus to start in something other than command prompt?

I have just installed oracle 11g enterprise addition. I am use to a different type of editor for the sql plus, the one I am use to comes up in a white area and has drop downs for file, tools, spool, help and so on. You can also open notepad with a shortcut. I like this better than command prompt how do i get this?

I think you mean sqlplusw.exe which is a Windows executable delivered until Oracle 10.2 but no more delivered with Oracle 11g.
Mayb you can have a look to SQL Developer http://www.oracle.com/technology/software/products/sql/index.html

How to print pdf file in SQL Server Reporting services report using command prompt?

Is there a way to automatically print a SQL Server Reporting services report on command prompt? For eg: We can save a pdf file using rs.exe utility. I want to print a pdf using rs.exe utility. Is it possible? I don't want to install any 3rd party software.

Thanks Simon for replying to my question.
In oracle form, there is oracle command to print the report from command prompt with the help of rwrun.exe
e.g: rwrun.exe REPORT="D:\Test\REP_25\MLA.REP" DESNAME="testprinter" DESTYPE="PRINTER" P_FORMNAME="MLA.FMX" P_SPRACHE="E" P_SPRACHE_NR2="1" P_WHERE_BEDINGUNG="order by land_nr" USERID="test/test.world" PSV_NAME="PSV_DEMO" PSV_JOB_ID="PS$9583" RECURSIVE_LOAD="NO"
BATCH="YES" NONBLOCKSQL="NO" ARRAYSIZE="1" PARAMFORM="NO" ERRFILE="c:\temp\psv16.tmp"<
and to save the report we just need to change DESNAME="c:\temp\OC_100001349.pdf" DESTYPE="FILE" in above command instead of DESNAME="testprinter" DESTYPE="PRINTER".
DESNAME and DESTYPE are the input parameters of the respective report.
In SSRS, we can run the file from the command prompt and save it.
rs -i "C:\Users\pujarswa\Documents\reports\new\LoadReport.rss" -s ww2004760:80/ReportServer_MSSQL -v fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"
-v reportPath="/TipsReport/LoadListTabular" -t -v format="PDF" -v LandNr=4 -u ap\swati -p test@# -e Exec2005
But we cannot use same command for printing as you said we need to create another script for printing files.
I have gone through the links but I dont want to use Adobe Acrobat Reader exe for printing because client it may not have Adobe Acrobat Reader on their machine.
Also I want to pass a input parameter as type="Printer" to my report which will print directly for me and same I can acheive in command prompt passing type="Printer" fileName="C:\Users\pujarswa\Desktop\TipsReportLoad.pdf"

I have an hp p3005dn printer. how can i print to "lpt1" in command prompt mode. win 7.

I am trying to get my printer so I can print to it from "Command Prompt". I have done the "Port" thing to allow Windows to accept "LPT1" as an alternate printer spool name. I know there are a command or two that are required in Command Prompt itself, but I do not know them. Can anybody help with the commands required in Command Prompt.
Thanks

Hello Greenwood Newton HS,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Best of luck,
Mario

How can I pass a value to the command prompt?

I was wondering how can I pass a value to the command prompt with Windows and Linux? I'm more interested in Linux's system than Windows though. Is there a way to return info from the command prompt?

Here is a snippet from http://mindprod.com/jglossexec.html that explains how in detail.
Runtime.getRuntime().exec("myprog.exe") will spawn an external process that runs in parallel with the Java execution. In Windows 95/98/ME/NT/2000/XP, you must use an explicit *.exe or *.com extension on the parameter. It is also best to fully qualify those names so that the system executable search path is irrelevant, and so you don't pick up some stray program off the path with the same name.
To run a *.BAT, *.CMD, *.html *.BTM or URL you must invoke the command processor with these as a parameter. These extensions are not first class executables in Windows. They are input data for the command processor. You must also invoke the command processor when you want to use the < > | piping options, Here's how, presuming you are not interested in looking at the output:
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat" );
Runtime.getRuntime( ).exec ("cmd.exe /E:1900 /C MyCmd.cmd" );
Runtime.getRuntime( ).exec ("C:\\4DOS601\\4DOS.COM /E:1900 /C MyBtm.btm" );
Runtime.getRuntime( ).exec ("D:\\4NT301\\4NT.EXE /E:1900 /C MyBtm.btm" );
There are also overloaded forms of exec(),
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null);
Runtime.getRuntime( ).exec ("command.com /E:1900 /C MyBat.bat", null, "C:\\SomeDirectory");
The second argument can be a String [], and can be used to set environment variables. In the second case, "C:\\SomeDirectory" specifies a directory for the process to start in. If, for instance, your process saves files to disk, then this form allows you to specify which directory they will be saved in.
Windows and NT will let you feed a URL string to the command processor and it will find a browser, launch the browser, and render the page, e.g.
Runtime.getRuntime( ).exec ("command.com http://mindprod.com/projects.html" );
Another lower level approach that does not require extension associations to be quite as well set up is:
Runtime.getRuntime( ).exec ("rundll32 url.dll,FileProtocolHandler http://mindprod.com/projects.html" );
Note that a URL is not the same thing as a file name. You can point your browser at a local file with something like this: file://localhost/E:/mindprod/jgloss.html or file:///E|/mindprod/jgloss.html.
Composing just the right platform-specific command to launch browser and feed it a URL to display can be frustrating. You can use the BrowserLauncher package to do that for you.
Note that
rundll32.exe url.dll,FileProtocolHandler file:///E|/mindprod/jgloss.html
won't work on the command line because | is reserved as the piping operator, though it will work as an exec parameter passed directly to the rundll32.exe executable.
With explicit extensions and appropriately set up associations in Windows 95/98/ME/NT/2000/XP you can often bypass the command processor and invoke the file directly, even *.bat.
Similarly, for Unix/Linux you must spawn the program that can process the script, e.g. bash. However, you can run scripts directly with exec if you do two things:
Start the script with #!bash or whatever the interpreter's name is.
Mark the script file itself with the executable attribute.
Alternatively start the script interpreter, e.g.
Runtime.getRuntime( ).exec (new String[]{"/bin/sh", "-c", "echo $SHELL"}";

Running a GUI application without holding command prompt

Hi there ,
I have developed a GUI application using Swing. After compiling the same successfully , when I run the same , presently , I am running it like ,
c:\> java xxx
where c:\ is the general command prompt on a Windows machine where I can type in my commands like javac or java and xxx is the class file name . Now till I complete using my GUI application and exit from the same , the command prompt will also be there ( and probably displaying the output of my System.out.println ) . So , two sessions are running , one is just the command prompt and another is the actual GUI application.
How can I avoide this ? e.g. when I type command "notepad" and press enter , notepad is started and the command prompt returns after starting notepad i.e. the notepad and the command prompt are not related now , I can close the command intrepreter and still notepad is running . What should I do to create such a Java GUI application ? Please advice .

If I understand you correctly this is something that happens in linux also. And I believe that you can solve this by creating to shortcut to this program.
And the shortcut or link to application will be the command line that you use to run the Java Application.
i.e.
java c:\javadir\subjavadir\application.class
And I believe that this will allow it to run without the command prompt. Just showing the GUI and no additional command prompt window. Freeing the command prompt is something that I don't know how to do in either OS.
I use the Link To Application method because I ultimately don't need to have multiple windows for one application. Even though it is nice to be able to kill the Application by destroying the command-prompt session (in case your app causes lock-ups during testing).
Post your results . . . I'm not even sure that I'm being clear at all with my explanation to your question.

Header in Command prompt

Similar Messages

Maybe you are looking for