Header Information Repeating in the Same Page

Hi Buddies,
I have an issue with PO Print Report. I am trying to reapet the header information by using <?start:body?> after the header informaiton and <?end body?> before the footer informaiton.
If i have two different headers, it displayed in the same page. For e.g I have po header details for PO 30124 and PO 30124-1. These two headers information displaying in all the pages and main body and footer informations goes to the next page.
pls guide me how to solve this one?
Regards
Prabu

Hi,
Are you saying that you need conditional headers? If so, then use <?IF ...> statements.
If your footer is not working correctly make sure your syntax is correct?
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

Similar Messages

Keeping heading and detail on the same page

Hi, I have a report with a group header section and a detail section. How can I keep the heading section and all the detail section on the same page without starting each group on a new page?
The detail section will have either 2 or 3 records with some of the objects set to grow if the data doesn't fit on one line. This results in several changes of group appearing on the same page which is what I want. However, what I don't want is the header section on one page with the detail section on the next, or the header and some of the detail records on one page with the rest of the detail records on the next. What I would like is the report to start a new page if the header and all the detail records don't fit on the same page but without starting a new page for every group change. How can I achieve this?

you can put the group header and details into a sub report on the old group header section.
then hide the details section

Parent (Global) and Current (Navigation) on the Same Page

Hello,
I am using the managed metadata feature in a SharePoint 2013 publishing site. I am trying to layout my navigation as shown in the diagram below. I can not find a publishing master page that implements this parent child relationship. My
top navigation is use the markup:
<PublishingNavigation:PortalSiteMapDataSource ID="topSiteMap" runat="server" EnableViewState="false" SiteMapProvider="GlobalNavigationSwitchableProvider" StartFromCurrentNode="false" StartingNodeOffset="0"
ShowStartingNode="false" TrimNonCurrentTypes="Heading"/>
<SharePoint:AspMenu ID="TopNavigationMenu" runat="server" EnableViewState="false" DataSourceID="topSiteMap" AccessKey="<%$Resources:wss,navigation_accesskey%>"
UseSimpleRendering="true" UseSeparateCss="false" Orientation="Horizontal" StaticDisplayLevels="1" AdjustForShowStartingNode="true" MaximumDynamicDisplayLevels="1" SkipLinkText=""/>
I have tried using the same markup, using a different StartingNodeOffset and SiteMapProviders, for the side menu with no success.
Thanks,
Bob

Hi,
According to your post, my understanding is that you wanted to create Parent (Global) and Current (Navigation) on the Same Page.
You can make quicklaunch work contextually like structural nav quicklaunch using Managed Metadata navigation. Please refer to:
Managed Metadata Navigation - How do you make quicklaunch work contextually like structural nav quicklaunch?
In addition, you can used JQuery and CSS to achieve staticlevel left navigation in SharePoint 2013.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/forums/sharepoint/en-US/54edc501-0594-49e3-86b2-40ecf72bc68e/show-2-level-hierarchy-in-managed-navigation-menucurrent-navigation-in-sharepoint-2013
More information:
Overview of managed navigation in SharePoint Server 2013
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Table Link on the same page in Numbers '09

I didn't word this correctly but I will try to explain what I'm trying to do.
I have a sheet of birthdays, which is only 2 columns and its sorted by date. I want to have the table continue the sorted information on the same page. For example, There are 4 pages each with 2 columns, I want to put as much information on one page like 1/1 - 5/5 on the first half of the page then continue 5/6 - 8/30 on the second half of the page, maintaining it being sorted.
I'm not sure if this made any sense, but an example would be in pages if I have 2 text boxes and link them the information will spill into the next text box.

I came up with what may be a better idea after writing all this. But rather than delete it, here is my first idea:
Numbers does not have page breaks and I can't think of a way to do what you want the way you are asking. But what you can do is use your original table as a master and have several other, smaller tables that break it up as you want. For instance, a table that has only birthdays in January 2009 could be constructed with the following formula in cell B2 (the date column) and A2 (which I am guessing is the person's name):
B2=IF(AND(Table 1 :: B2>DATE(2008,12,31),Table 1 :: B2<DATE(2009,2,1)),Table 1 :: B2,"")
A2=IF(B2="","",Table 1 :: A2)
This table should be longer than your master table. It should be longer than you think your master table will get. Otherwise the dates at the bottom of your master table, as you add to it, will not be transferred over.
After you have those formulas in columns A and B, go to the reorganize panel and choose to show rows where column B is not blank. That will hide all the blank rows. And you can sort it.
Create other tables for your other groups of dates. You'll have to sort each table separately if you add more birthdays to your master table.
You can arrange your tables on the page so several of these tables are side by side. I would not recommend arranging them with any above another.
If you want to get fancier, you can use two header cells of each table to specify the start and end dates. Then, instead of hard coding the dates into the formula, you would reference those two cells.

How to display header fields names in the next page in report6i

how to display repeat header field names into the next page in report6i urgent plz......
When i am runing report in 1st page only the header information is displaying in 2 page the header info is not displaying only records are displaying.So i want to display the header info in 2nd page also.
Plz help out.

Hello,
Go to the report layout model and select those items/objects which are not getting display on next page and open the property pallet by pressing F4 key and set the property Print Object On to All Pages then it will display on all pages.
-Ammad

WHEN I LOGIN AS DIFFERENT USER, IT TAKES ME TO THE SAME PAGE WHERE THE PREV

Hu Gurus,
I log in to portal as user1 and go to a page and then log out of the portal. Then I try to login as user2, it takes me to the same page where the previous user was. It looks like it caches the page information. How can I avoid this. Please post a reply if you have some suggestions.
Thanks
Raj
----------

Thanks for checking it, Jason. Yes, the cache settings are for 'Every visit to page'. That was the first thing I thought of. I have a feeling the problem has to do with a cache setting somewhere in our installation. For example, I'm still plagued with a few user accounts returning errors when I try to log in. The users aren't logged in, but when I click "Login" from the Portal Builder page, I see the same error...it's not even letting me get to a login screen. Thanks for all the help. It's great to get some feedback. In the meantime, we'll continue to track it down here.
Mary

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

AT&T customers service reps. (Phone) and in the store not on the same page!

On 6/27/15, I called into the 1(800) number to order a new phone and change my plan to the "Next" plan. I went through whole process with the rep over the phone. I asked if I could pick up the phone from the AT&T store in my area. She told me I would have to go into the store and got through the process there. She stated, I would only have to pay the taxes (around $42) on the phone and pick what installment plan I wanted. Well I went into the store and spoke with a sales rep. picked the phone I wanted and proceeded with the process. First I was told I had to pay my bill which was not an issue $127 the rep double charged my card. In which a manager had to fix. Then I was told I had to pay $200 for downpayment to be on the Next plan. When questioned was told oh we do this for customers getting an additional line, t(the rep I spoke to that morning said paid the taxes for the phone) so I paid the $200. On 7/9/15 upon paying my bill I happened to look at the details of my account. I notice the charge of $201 on 6/27/15 but my bank account reflected the amount of $242. from AT&T. So I called customer service and spoke with a rep by the name of Robert. Robert explained the confusion then, stated I did not have to pay the $201 for the Next plan. I asked if I could have the $201 moved towards my bill, he stated yes it would not be an issue. When he tried to make the adjustment he was unable to and informed me that I would have go into the store. He also verified with his supervisor of the issue. He said he would have all the info needed documented on my account. Later that day I went on the AT&T site to remove the mobile TV app and was unable do. So I got on the chat live contacted a rep Arvin, who helped me with issue. Then I asked him the same question in reference the Next plan. He confirmed with a supervisor that indeed I did not have to pay downpayment, just the tax. He also put in notes on my account and said go into the store. I arrive to the store (Snellville, GA) and was approached by Pamela. I told her the issue and she proceed to tell me, that AT&T runs credit checks for additional lines. Which when I transferred to AT&T they ran a credit check. But for an additional line and switch to another plan. I told her what the other 4 reps which includes the original rep that I started the initial order on the morning of 6/27 told me. Pamela stated that they were wrong and did not know what they were talking about and they don't deal with customers as the store does. And she would look at my account and see. I told her I have the print out of the chat from Arvin. After she read the notes she proceeded to tell me I was wrong and the other reps were wrong and then she called the 800 number spoke with a customer service and the rep she spoke with told her "NO" they don't do that and I was correct in what I was saying about my the issue. Pamela told her, she was incorrect and that she need to go read the regulations and gave her reg to look up. During this time my mom was with me and she informed me a family friend was supervisor for AT&T Corporate office and to call her. In which we did and she stated the same of course Pamela said we wrong and was nice nasty in reference to it as in being a know it all that she just couldn't be wrong. My issue wasn't resolved and I felt like AT&T took my money and called myself and the 5 employees that worked there liars. For a company that has been on the news for overcharging their customers you would think that your company would have better customer service and all on the same page. And if the majority and a Supervisor were agreeing and saying that same thing. Pamela should have did the change on the account and not have a customer your company says it values to leave the store feeling the way I did. Meaning knowing that I was upset and that I was told the same thing by 5 employees of your company, Pamela should have tried to compensate me or made sure that I wouldn't have any thoughts of going to another phone company. I was made to feel like I was lied to. It's bad enough when you walk into the stores the reps are on you like vultures. And you feel overwhelmed and like you're at car lot. And the reps are wheeling and dealing for their commission. Now I'm concerned if I chose the right company???

I didn't even do the survey and the reps in the store said it had to be done over the phone I just never called back I had already taken time to drive to the store I wasn't about to waste more time dealing with an upgrade over the phone I just figured doing an upgrade over the phone would be the same as doing it in the store I don't understand what the difference is

How to pass a parameter from a report to multiple forms in the same page

Hi:
i have a report and a lot of forms in the same page. The fact is that i want to stablish a link over a filed in the report which would make some information appear in those forms so that information could be updated. For example: i have a report with company names. Over those names i want to put a link. When the link would be pressed the forms would reflect the information about that comany. Is this possible to be done? how can i do this or something similar?
Thanks.
Regards. Urko.

Please see post Re: session state security
It has been done for a single form in a page and can be extended to multiple forms as well.

How to get Report Builder to print a section on the same page

I have a section of my report that is three bands. A header
band, the detail band, and a total line band. Sometimes this
section will get split up and print part on the next page. So
basically I need for this section to print on the same page. I know
that I could insert a page break right above the header, but this
will make my report way longer than it needs to be. I have also
unchecked "split allowed" for that band also but that didn't make a
difference. Is there some way to group three bands together so that
if it is two big to print the section on the current page then
print the whole section on the next page. It is driving our
accounting lady nuts because when she likes to verify that the
totals are coming out right and sometimes she has to flip over to
the next page to continue calculating.

you need to create a multi-instrument in the environment next to your audio-instrument,then push a cable from there to your audio-instrument.in the arrange window your multi-instrument will appear in the window where you select the track-type next to the audio tracks, audio-busses etc. these midi tracks now trigger your vsti on the selected midi channel.you have to record your midi now on these tracks and not on the audio-instrument track,because there you only trigger its own channel. i hope i explained it well but i think you have understood what i ment.

Multiple click boxes in the same page

I'm trying to include 4 click boxes in the same page in Captivate 5. The idea is when user clicks on each box, the content reveals and stays on the screen. The first click box works fine. But when click the second box, the content shows only for less than a second and then quickly moves to the next screen, and of course, there is no chance to even get to the 3rd and the 4th one. Can anyone help me? Thanks!

Hi Lilybiri,
Does this mean that the user has to click the click boxes in the order that you stagger the pauses? For example, if I'm showing a picture and instructing the user to click on any area to get more information, they could really click on any area first - however will that click box pop up if that click area was not the "first" pause in my timeline?
Also, how do I get the "success" caption text to stay on the page? I don't want it to fade so that the user can see all of the info. once they've clicked each box. I've checked to make sure that the "fade out" option is off, and I'm assuming I can't have the click boxes "display for the rest of the slide" since that would ruin the pause increments.
Thanks!
Chantelle

Multiple (updatable) details in the same page.

Hello,
I tried to put two updatable details in the same page and got the error
"Updatable SQL Query already exists on page 11. You can only add one updatable SQL query per page. Select a different page"
So having more than one updatable detail is not allowed in apex ?
I have a master table with three details. Should I create one page for each one of them ?
Thanks in advance
Bye
Nicola

What you want to use are called collections. Here is a simple collection example:
The process goes in 4 steps: gather the data, display the data, update based on user input, then write the changes. Each step requires it's own piece of code, but you can extend this out as far as you want. I have a complex form that has no less than a master table and 4 children I write to based on user input, so this can get as complex as you need. Let me know if anything doesn't make sense.
First, create the basic dataset you are going to work with. This usually includes existing data + empty rows for input. Create a Procedure that fires BEFORE HEADER or AFTER HEADER but definitely BEFORE the first region.
DECLARE
v_id     NUMBER;
var1     NUMBER;
var2     NUMBER;
var3     VARCHAR2(10);
var4     VARCHAR2(8);
cursor c_prepop is
select KEY, col1, col2, col3, to_char(col4,'MMDDYYYY')
    from table1
    where ...;
i         NUMBER;
cntr      NUMBER := 5; --sets the number of blank rows
BEGIN
OPEN c_prepop;
    LOOP
      FETCH c_prepop into v_id, var1, var2, var3, var4;
      EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
        p_collection_name => 'MY_COLLECTION',
        p_c001 => v_id, --Primary Key
        p_c002 => var1, --Number placeholder
        p_c003 => var2, --Number placeholder
        p_c004 => var3, --text placeholder
        p_c005 => var4 --Date placeholder
    END LOOP;
CLOSE c_prepop;
for i in 1..cntr loop
    APEX_COLLECTION.ADD_MEMBER(
        p_collection_name => 'MY_COLLECTION',
        p_c001 => 0, --designates this as a new record
        p_c002 => 0, --Number placeholder
        p_c003 => 0, --Number placeholder
        p_c004 => NULL, --text placeholder
        p_c005 => to_char(SYSDATE,'MMDDYYYY') --Date placeholder
end loop;
END;Now I have a collection populated with rows I can use. In this example I have 2 NUMBERS, a TEXT value, and a DATE value stored as text. Collections can't store DATE datatypes, so you have to cast it to text and play with it that way. The reason is because the user is going to see and manipulate text - not a DATE datatype. If you are using this as part of a master/detail form, make sure that your SQL to grab the detail is limited to just the related data.
Now build the form/report region so your users can see/manipulate the data. Here is a sample query:
SELECT rownum, apex_item.hidden(1, c001), --Key ID
     apex_item.text(2, c002, 8, 8) VALUE1,
     apex_item.text(3, c003, 3, 3) VALUE2,
     apex_item.text(4, c004, 8, 8) VALUE3,
     apex_item.date_popup(5, null,c005,'MMDDYYYY',10,10) MY_DATE
FROM APEX_COLLECTIONS
WHERE COLLECTION_NAME = 'MY_COLLECTION'This will be a report just like an SQL report - you're just pulling the data from the collection. You can still apply the nice formatting, naming, sorting, etc. of a standard report. In the report the user will have 3 "text" values and one Date with Date Picker. You can change the format, just make sure to change it in all four procedures.
What is critical to note here are the numbers that come right before the column names. These numbers become identifiers in the array used to capture the data. What APEX does is creates an array of up to 50 items it designates as F01-F50. The F is static, but the number following it corresponds to the number in your report declaration above, ie, F01 will contain the primary key value, F02 will contain the first numeric value, etc. While not strictly necessary, it is good practice to assign these values so you don't have to guess.
One more note: I try to align the c00x values from the columns in the collection with the F0X values in the array to keep myself straight, but they are separate values that do NOT have to match. If you have an application you think might get expanded on, you can leave gaps wherever you want. Keep in mind, however, that you only have 50 array columns to use for data input. That's the limit of the F0X array even though a collection may have up to 1000 values.
Now you need a way to capture user input. I like to create this as a BEFORE COMPUTATIONS/VALIDATIONS procedure that way the user can see what they changed (even if it is wrong). Use the Validations to catch mistakes.
declare
j pls_integer := 0;
begin
for j1 in (
select seq_id from apex_collections
where collection_name = 'MY_COLLECTION'
order by seq_id) loop
j := j+1;
--VAL1 (number)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>2,p_attr_value=>wwv_flow.g_f02(j));
--VAL2 (number)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f03(j));
--VAL3 (text)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>4,p_attr_value=>wwv_flow.g_f04(j));
--VAL4 (Date)
apex_collection.update_member_attribute (p_collection_name=> 'MY_COLLECTION',
      p_seq=> j1.seq_id,p_attr_number =>5,p_attr_value=>wwv_flow.g_f05(j));
end loop;
end;Clear as mud? Walk through it slowly. The syntax tells APEX which Collection (p_collection_name), then which row (p_seq), then which column/attribute (p_attr_number) to update with which value (wwv_flow.g_f0X(j)). The attribute number is the column number from the collection without the "c" in front (ie c004 in the collection = attribute 4).
The last one is your procedure to write the changes to the Database. This one should be a procedure that fires AFTER COMPUTATIONS AND VALIDATIONS. It uses that hidden KEY value to determine whether the row exists and needs to be updated, or new and needs to be inserted.
declare
begin
--Get records from Collection
for y in (select TO_NUMBER(c001) x_key, TO_NUMBER(c002) x_1,
             TO_NUMBER(c003) x_2,
             c004 x_3,
             TO_DATE(c005,'MMDDYYYY') x_dt
           FROM APEX_COLLECTIONS
           WHERE COLLECTION_NAME = 'MY_COLLECTION') loop
    if y.x_key = 0 then --New record
        insert into MY_TABLE (KEY_ID, COL1,
            COL2, COL3, COL4, COL5)
          values (SEQ_MY_TABLE.nextval, y.x_1,
              y.x_2, y.x_3, y.x_4, y.x_dt);
    elsif y.x_key > 0 then --Existing record
        update MY_TABLE set COL1=y.x_1, COL2=y.x_2,
             COL3=y.x_3, COL4=y.x_4, COL5=y.x_dt
         where KEY_ID = y.x_key;
    else
      --THROW ERROR CONDITION
    end if;
end loop;
end;Now I usually include something to distinguish the empty new rows from the full new rows, but for simplicity I'm not including it here.
Anyway, this works very well and allows me complete control over what I display on the screen and where all the data goes. I suggest using the APEX forms where you can, but for complex situations, this works nicely. Let me know if you need further clarifications.

Parameters and report on the same page

I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
Rek

Sounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet

My phone has the correct AppleID in the in settings section but asks me to login with one that isn't mine. I deleted the ID from my itunes but it still won't let me login with mine. How do I get my iPhone on the same page?

My iphone4 has the correct Apple ID in the information settings section and asks me to login to my ID most of the time but when I try to update my apps, it asks me to login with an ID that isn't mine. I deleted the wrong ID from my itunes but it still won't let me login with my own ID to update apps. How do I get my iphone on the same page?

How did you obtain these apps? All apps are DRM protected & tied forever to the account used to originally obtain them. They cannot be transferred to another Apple ID(account), nor can they be updated using any Apple ID other than the one that was used to originally obtain them.

Header Information Repeating in the Same Page

Similar Messages

Maybe you are looking for