Header Line - Smartform

Hi Frds
In my smartform output(Print Preview) the header line is coming THICKER .
How to reduce it ?
Thanks
Pari Vendhan.R

Hi,
As you are working with smartforms, check out the options of borders and shading if you are talking about the header lines.
If you are mentioning about the content in the header, use of smartstyles (Tcode: SMARTFORMS/SE72) definitely helps. Create a new smartstyle with the desired fonts and all and assign this to the header which would cater your requirement.
Regards,
Narendra.

Similar Messages

How to create an internal table with header line in smartforms

Hello Guys,
I need to append the data in my internal table in smartforms by the problem is an error occurred "a table without header line and therefore no component called tdline"
i already declared the data under types declaration tab
types : begin of ts_tline,
         TDFORMAT type tdformat,
         tdline type tdline,
        end of ts_tline.
types : it_tline type table of ts_tline.
and declare these in global data
WA_TLINE type TS_TLINE
XT_TLINE type IT_TLINE
my syntax in program lines :
LOOP AT gy_lines INTO WA_PROJ.
    SPLIT wa_proj AT cl_abap_char_utilities=>cr_lf
       INTO table IT_SPLIT.
    LOOP AT IT_SPLIT.
      MOVE it_split-commentext TO xt_TLINE-tdline.
an error occured at this part ****
     append xt_TLINE.
    ENDLOOP.
ENDLOOP.
what is wrong with my code..it cannot append data to xt_tline.
Please help.Will reward points
Thanks in advance
aVaDuDz

check this link
this will help u......
http://www.****************/Tutorials/Smartforms/SFMain.htm
reward IF..........
regards
Anbu

Header Line not Displayed in Smartform

Hi all,
in Smartforms , i am having one Page.
in the main window , in Footer i am having Grand total to be displayed in the last page. i have put condition
SFSY-PAGE = SFSY-JOBPAGES.
the Problem is in the last page the header line is not displayed.
in all other pages it is getting displayed.
Can anyone help me out.
Regards.
Suki.

Ok. I got the problem now. There is not simple solution for this.
You can create a new window just only for header. Put it on the same place as the Current Header line starts.
Move the contents from Main table header line to Header window.
This way, the header will print on all the pages.
Regards,
Naimesh Patel

After adding one column in a table can't get the header line

hi all,
i have make a SMART FORM which was working perfectly.Now the requirement of user is to add one column in my table at smart form which i did and after modification i execute it it give me data as well but issue which i'm facing is that the TABLE at smart forms in which i have add one field is not displaying the HEADER LINE which i have define with SELECT PATTREN option.
Thanks & Regards,
sappk25

Hi,
Have you created the Header Text? If yes, then might be the case that your smartforms
table which was already created is with Multiple Line. Check weather you have added
customer field in Header Line or Not?
Regards,
SUjeet

Header line only prints on first page of multiple page document

Hi, I've created a SmartForms table and it has the Header, Main, and Footer sections. I've created table lines for the Header and Main sections. In the Header section, I've checked 'at Start of Table' and 'at Page Break'. The form prints multiple pages fine, BUT the header line only prints on the first page and not at any of the multiple page breaks.
Does anyone have any suggestions as to what might be causing this?
Thanks,

Hi,
Remove that 'at Start of Table' check box and check it.
Regards
Muthappan.

Regarding vertical lines smartform main window

hi all,
How can i draw vertical lines in Smartforms. I want vertical lines between columns in the main window and i want the lines from top to bottom even if i have just one record in the table data.
how can i solve this using table.
Please reply.
Regards
Rami Reddy

Hi Rami,
Refer these links.
Re: how to draw vertical line in a particular window
http://209.85.175.104/search?q=cache:phjbJwuDWssJ:www.zebra.com/id/zebra/na/en/documentlibrary/misc/sap_smartforms_technical.File.tmp/SAP_SmartForms_V3.pdfHowtodrawverticallinesinsmartform&hl=en&ct=clnk&cd=3&gl=in
Or table tab -> ypu will see a box for table pattern - > click on select
pattern and there u will find many options to draw lines!!!
below your table, you will have the header line type.
double click to select it.
on the right pane, go to attributes
click on the top left button here (select option) ...
in the popup, click the display frame button
select your choice
activate your smart form. this should work
Or
Even you can draw a window as vertical and specify its width as 0
.02.It will automaticall draw a vertical line of specified parameters.
Cheers
Mohinder Singh Chauhan

How to get multiple copies with different decription on header line

I want to get multiple copies of print out automatically with different description on header line when i click on save or print button.

is this smartforms....?
if yes then this can be achieved using the copy windows concept of smartforms.....
Regards,
Lalit Mohan Gupta

"table" is a table without a header line & therefore has no component"fiel"

Hi Experts,
     In Smartforms, I have used internal table "it_tab" in my table.. and i declared type for that internal table in TYPES tab.
& i declared work area for that in global definitions. But i am getting this error.
"table" is a table without a header line & therefore has no component"fieldname"
will you please help me. please provide me an example code for this
thanks in Advance
Edited by: sreelakshmi.B on Jun 24, 2010 4:39 PM

Hi,
    In Global Definitions under "Types" tab, declare as below
TYPES: BEGIN OF type_split,
         SPLIT1(20) TYPE C,    "Day of week
         SPLIT2(20) TYPE C,    "year
         SPLIT3(20) TYPE C,    "month
         SPLIT4(20) TYPE C,    "day of month
       END OF type_split.
TYPES : t_date TYPE type_split OCCURS 0.
Now in "Global Data" tab, declare as below
it_itab     TYPE     t_date
wa_itab     TYPE     type_split
Regards
Bala Krishna

How to print header lines at the top of every page with Alv list display?

Dear all,
I need a requirement with printing issue. A program list should be printed with the function reuse_alv_list_display.
The list has several pages and then can be printed but the header lines appear only first page when they printed. The other pages don't have header lines, they continue with the next record of the list remaining from previous page. I use the alv parameters as below:
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_pf_status_set = 'ALV_PF_STATUS'
      is_layout                = ls_layo
      it_fieldcat              = lt_fcat
      i_default                = 'X'
      i_save                   = 'A'
      is_variant               = ls_variant
      it_events                = lt_events
    TABLES
      t_outtab                 = lt_data
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
and lt_events as below:
ls_event-name = 'END_OF_LIST'.
ls_event-form = 'ALV_END_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'END_OF_PAGE'.
ls_event-form = 'ALV_END_OF_PAGE'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_LIST'.
ls_event-form = 'ALV_TOP_OF_LIST'.
APPEND ls_event TO lt_events.
ls_event-name = 'TOP_OF_PAGE'.
ls_event-form = 'ALV_TOP_OF_PAGE'.
APPEND ls_event TO lt_events.
So, how can I print header lines for every page?
Best Regards,

Hello Saba,
Your point might be very close to solution.
Because in the selection screen of the program there are two radio buttons, one of them visits 'REUSE_ALV_COMMENTARY_WRITE' function and the other doesn't. The one which visits has a problem with header liens in every page when printing. But I couldn't find out the solution yet.
reuse_alv_list_display uses 4 event and of course I call subroutine. There are end_of_list, end_of_page, top_of_list and top_of_page. I use in the subroutine for top_of_page:
CALL FUNCTION 'LVC_TRANSFER_TO_SLIS'
    EXPORTING
      it_fieldcat_lvc         = gt_fcat
    IMPORTING
      et_fieldcat_alv         = lt_fcat
    EXCEPTIONS
      it_data_missing         = 1
      it_fieldcat_lvc_missing = 2
      OTHERS                  = 3.
CALL FUNCTION 'REUSE_ALV_LIST_WIDTH_GET'
    EXPORTING
      it_fieldcat = lt_fcat
    IMPORTING
      e_width     = l_width.
WRITE l_reptx TO l_reptx CENTERED.
NEW-LINE.
WRITE: AT (l_width) l_reptx CENTERED.
SUBTRACT 10 FROM l_width.
WRITE: AT l_width sy-pagno RIGHT-JUSTIFIED.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        it_list_commentary       = lt_header
I_LOGO                   =
I_END_OF_LIST_GRID       =
Do you have other suggestions ?

How to add header line in a file from XI system using file adapters

Hi All,
I need to add header line (Column names) in a file coming from XI system.
I am using file adapters.
Thanks & Regards,
Gaurav Mittal

The Receiver File Adapter is configured, using the following settings:
1) Choose File Content Conversion as the Message Protocol.
2) You give the addHeaderLine parameter as 1
3) For the fieldSeparator parameter you need to give field separator for both list and substructure (referring to the data type above). For eg: it may be a , (comma) for substructure in a comma separated file.
4) The endSeparator parameter needs to given for substructure only. For eg: it may be a nl (new line)
5) Give the file name, the directory and the Construction mode. Activate all the settings. Receiver File Adapter with F.C.C. is configured.
please visit the blog.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b>

Fix table header line of Query in default web template WAD 7.0

Dear all,
I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query.
My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
Many thanks in advance for your answer and help!!!
Best regards
Abdel

Hi Dion,
Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested.
Best Regards
Abdel

Internal Table to Excel with Column Header line

Hello everyone,
I need to download Internal table data to excel with a column header line.
My Code is as follows:
TYPES: BEGIN OF y_hdr,
        head(30) TYPE c,
        END OF y_hdr.
Data: t_hdr TYPE STANDARD TABLE OF y_hdr.
Fill internal table t_adrcdata
fill the header table t_hdr
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                      = C:\test.xls
        filetype                        = 'DBF'
    IMPORTING
      TABLES
        data_tab                        = t_adrcdata
       fieldnames                       = t_hdr
     EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
This code gives me a row with column headers.
However they are all truncated after 10 chars.
The truncation is independent of column data length. Data could be of length 2,5 or 40 but the header always displays upto 10 chars.
Keeping the filename as test.xls, when I download it in ASC format instead of DBF the headers are of proper length.
What could I be doing wrong?
I know this topic has been discussed before but my question is pertaining to DBF Format download. The reason I chose DBF format is because it downloads the data in DB format and does not give in to Excel formatting.
FOr example in ASC format:
1, A field of type Char(12) used to get downloaded into excel without the leading zeros. 000012345678 --> 12345678
2. Date in format dd-MMM-yyyy in a char(11) field used to get downloaded to excel in dd-MMM-yy format.
When I chose DBF, this issue was resolved. However, the column headers got truncated at 10 chars.
Please feel free to recommend any other way of downloading to Excel and preserving format if this method is incorrect/ there is a better way.

Hi,
Take 'ASC' format for file type.
But when you declare your internal table to pass for FM you have to create all the fields with char.
Example:
data: begin of it_exl occurs 0,
        bukrs(04) type c,
        belnr(10) type c,
        buzei(03) type c,
end of ut_exl.
You need to manipulate your date format and other stuff before appending to this internal table.
Thanks,
Deepak.

How to delete value in the header line of itab

dear all,
i have create an internal table.
i would like to delete value of the header line after have used read table to read the contents.
how can i do it ?

If your internal table is something like this:
data: begin of i_mara occurs 0.
include structure mara.
data: end of i_mara.
That clears the matnr field of the header line...
CLEAR i_mara-matnr.

Extra header lines appearing in payload after singning and encrypting in Mail Receiver adapter PI 7.31

Hi,
We have a mail receiver adapter which is sending out a edi payload as attachment to the external receiver.
When we send the normal .edi file it is ok.
But when we sign and encrypt the payload and send it out, the external customer receiver decrypts and validates the message successfully but when their application tries to read the edi payload it finds the extra header lines as below :
content-id:
<[email protected]>
Content-Disposition: attachment; filename=xxxxxxxx.edi Content-Type:
application/xml
At their end, their application (DataPower) expects the first three characters of the payload
(decrypted payload) to be either UNA or UNB.This is how it validates whether the incoming message is an EDI message.
But it encounters the extra MIME headers in the payload.
Therefore it gets rejected by DataPower which thinks the content is an
unknown message type.
How to suppress the header lines appearing in the payload(after decryption and validation).
Thanks,
Guest

hi,
try content-type as "text/xml"

Header Line - Smartform

Similar Messages

Maybe you are looking for