Header trouble
I am new to both DreamWeaver and CSS. I am using DreamWeaver
CS3 to develop a website for our company. I used the health_nutr
design as a starting point but made modifications to fit our needs.
My problem lies within the header. I inserted a header image using
a div tag. Now I need to add a "Home" and "Contact Us" link along
with a search field to allow users to search the site. Originally I
drew the ap div's where I needed them and inserted the images. I
could not get these to view the same in IE and Safari. In one or
the other the images would either be dropped or flying up too high.
I tried every positioning possible, with relative, absolute, etc. I
then removed the ap div tags and inserted a table and entered what
I needed there. This works perfectly on the main index page. On all
the other pages, it either makes part of the header invisible or it
adds white space below the header section.
The attached code is a page that has a table added to the
header. It shows fine in IE but in Safari, part of the header image
is missing.
Is there a better way to be doing this? Or what am I missing?
I'm on a deadline for this project and I'm at my wit's end trying
to figure this out. Thank you for any help or direction you can
give.
It sounds like you are using a 3-column table either in the header or at the top of your document. Why not use tabs instead? Tabs are really much more versatile.
Similar Messages
-
Troubles by changing the size of a bookmark header text Repot generation Toolkit
Hello everyone
I'm having troubles getting the size of a header text formatted into a different font size, I attach the code I'm using to get the work done.
At the end I get all I want from the report generation toolkit but the text size in the header and footer . Does Anyone have a clue?
Well the image is too small I'm getting an error when I try to post a bigger one. The thing is that the VI's used here to change the size are append report text.vi and format text.vi. The first one is used to insert text through bookmarks in the header and footer (it works just gereat) and the second one is intended to change the size of the inserted text (it doesn't work at all) I've already used shift registers in the for loop but I get the same results. The last VI is dispose report.vi
thanks in advance
Attachments:
Maquina Etdos Verifica Reporte.vi 94 KBHello Julio9,
sorry for the waiting I had to clean the block diagram up and take into account some data security issues before I could post the information you asked me to. I have to tell you that I already came out with a patch for the issue nonetheless it is not the correct way to solve it and I would appretiate if you or anyone else could help me to do it right.
Here is what I changed:
In my code at the Initialize state (within the state machine) there is the New Report.vi I opened it to get also the new report SubVI.vi opened, afterwards I selected the NI_Word.lvclass: new report subvi.vi and opened it in its code yoou can easly see the double numeric constant value for the size of the text inserted as default. I just changed it from 12 to 8 to correct the formatting. As the outcome all the text inserted through the bookmarks have the default size (8 pts).
I attached the new version of my code with all the documents you will need. Please follow these steps:
1.-Open the project named Verifica Temperaturas 2010.lvproj
2.-Run the main vi named Maquina Etdos verifica reporte 2.vi
3.-Check the option Laboratorio de Refrigeradores:
4.-Click OK
5.-Complete the information as shown:
(For Selecciona Machote pick the word document named Document.doc attached in the .zip file. For the Selecciona Archivo de temperaturas pick the Estacion1_21-02-2012.txt file also attached in the .zip file)
6.-Press Siguiente
After completing the steps you'll see how the document in created. As expected the size of the text in the header is 8 pts.
Attachments:
Verificacion_Camaras.zip 359 KB -
I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below. Any suggestions would help.
Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul -
Hey,
I am having trouble getting rid of a gap at the top of my header/banner
The attached picture shows what i am talking about: if you look above the photo on the left, you will see a black gap that i cannot get rid of. I want the picture to go all the way to the top of the page
How do i do this?
sorry for the simple question, but i just can't work it outYou have h2 tags (head text size 2) around the image at the top of the page.
<h2><img src="logo%20black.jpg" alt="ken logo" width="1000" height="200">
<!-- end #header -->
</h2>
They are adding an extra 18px drop above the image. Header tags are block tags, which means (partly) that they come with extra space (margin) above and below). Taking the h2 tags off moves the image back up. Then you can go to the css and make the header div 200px tall (the height of the photo) instead of 218px, and the whole thing will tighten up.
.twoColLiqLtHdr #header {
font-family: "MS Serif", "New York", serif;
background-color: #000;
background-position: 0px;
height: 200px;
position: relative;
padding-top: 0px;
padding-right: 0px;
padding-bottom: 0px;
padding-left: 0px;
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
border: medium double #300;
Beth -
Trouble with the header content of php script - return wrong character: ?�?
Hello everybody!
I have one problem with reading of content of php's return text value.
Ok in php script was programmed something like this:
===========================================
$new1 = ereg_replace(".*OUTPUT url=\"(.{40,70})\" ?/>.*", "\\1",$XMLResponse);
$size = strlen($new1);
header("Content-Type: text/plain");
header("Content-Length: " .$size);
echo $new1;
==========================================
$new1 includes url address to picture.
Ok, in my java applet I'm using the method readLine() of DataInputStream Class, where I'm reading the return text value of the mentioned php script. The code is here:
==========================================
try {
dis = new DataInputStream(url.openStream());
str = dis.readLine();
} catch (IOException e2) {
==========================================
but response is a text plus this kind of characters in beginning : ?�?
What the trouble there? Thank you
Jan Zitniak :)Hello,
thank you for your idea, but I resolved problem with this code:
URL urlReal = null;
try {
urlReal = new URL (str); // convert String to URL
} catch (MalformedURLException e) {
// TODO Auto-generated catch block
e.printStackTrace();
In that code I "converted" a string to url where the string happened a real URL address.
Jan :) -
nydogworks.net
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>NYDogWorks Long Island Dog Training and Behavior</title>
<meta name="description" content="Serving all of Long Island, Nassau & Suffolk. NYDogWorks specializes in dog training, dog behavior, and puppy training.">
<meta name="keywords" content="dog training, long island dog training, dog trainer, long island dog obedience, puppy training classes">
<link href="css/mainstyle.css" rel="stylesheet" type="text/css" />
<script type="text/javascript"
src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script><!-- Beginning of compulsory code below -->
<link href="css/dropdown.css" media="screen" rel="stylesheet" type="text/css" />
<link href="css/default.advanced.css" media="screen" rel="stylesheet" type="text/css" />
<!--[if lt IE 7]>
<script type="text/javascript" src="js/jquery/jquery.js"></script>
<script type="text/javascript" src="js/jquery/jquery.dropdown.js"></script>
<![endif]-->
<!-- / END -->
<link href="css/overlay-apple.css" rel="stylesheet" type="text/css" />
<script src="js/jquery.tools.min.js"></script>
<style>
div.apple_overlay h2 {
margin:10px 0 -9px 0;
color:#222;
font-weight:bold;
font-size:14px;
div.black h2 {
color:#222;
#apple {
margin-top:10px;
float: left;
width: 250px;
padding-right: 10px;
#apple img {
background-color:#fff;
padding:2px;
border:1px solid #ccc;
margin:2px 5px;
cursor:pointer;
-moz-border-radius:4px;
-webkit-border-radius:4px;
body {
margin-right: auto;
margin-left: auto;
</style>
<!--[if lt IE 7]>
<style>
div.apple_overlay {
background-image:url(http://static.flowplayer.org/tools/img/overlay/overlay_IE6.gif);
color:#fff;
/* default close button positioned on upper right corner */
div.apple_overlay div.close {
background-image:url(http://static.flowplayer.org/tools/img/overlay/overlay_close_IE6.gif);
</style>
<![endif]--><script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script><script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
</script>
<script type="text/javascript">
var _gaq = _gaq || [];
_gaq.push(['_setAccount', 'UA-26177215-1']);
_gaq.push(['_trackPageview']);
(function() {
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body onload="MM_preloadImages('images/nydogworks-logo-hover.png','images/training-services-on. jpg','images/behavior-therapy-on.jpg','images/off-leash-training-on.jpg')">
<div id="wrapper"> <div id="header">
<div id="logoBox"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image3','','images/nydogworks-logo-hover.png',1)"><img src="images/nydogworks-logo.png" alt="NY Dogworks" name="Image3" width="280" height="200" border="0" id="Image3" /></a></div>
<div id="slogan">Serving All of Long Island, Nassau & Suffolk Counties<br />
Also serving Manhattan, Brooklyn & Queens
</div><div id="emailBox">
<h2><img src="images/calltogetstarted.png" width="473" height="74" alt="Call to get started" /></h2>
</div><div id="mainNav"><!-- Beginning of compulsory code below -->
<ul class="dropdown dropdown-horizontal" id="nav" name="nav">
<li><a href="about-ny-dog-works.html">About Us</a></li>
<li><a href="long-island-dog-training-programs.html" class="dir">Training Programs</a>
<ul>
<li><a href="basic-obedience.html">In Home Dog Training</a></li>
<li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
<li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
<li><a href="off-leash-training.html">Off Leash Training</a></li>
<li><a href="puppy-training-program.html">Puppy Training</a></li>
</ul>
</li>
<li><a href="dog-trainer-testimonials.html" class="dir">Testimonials</a></li>
<li><a href="contact-long-island-dog-trainer.html" class="dir">Contact Us</a></li>
</ul>
<!-- / END --></div>
</div>
<div id="container">
<div id="imgholder"><a href="long-island-dog-training-programs.html"><img src="images/main-header.jpg" alt="private dog training long island new york" width="951" height="416" border="0" /></a>
<div id="program1"><a href="long-island-dog-training-programs.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image6','','images/training-services-on.jpg',1)"><img src="images/training-services.jpg" alt="dog training services" name="Image6" width="315" height="137" border="0" id="Image6" /></a></div>
<div id="program1"><a href="board-and-train-dog-program.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image5','','images/boarding_training-on.jpg',1)"><img src="images/Boarding_training.jpg" alt="board and train dog program" name="Image5" width="315" height="137" border="0" id="Image5" /></a></div>
<div id="program1"><a href="dog-behavior-therapy.html" onmouseout="MM_swapImgRestore()" onmouseover=
"MM_swapImage('Image7','','images/Behavior_therapy2-on.jpg',1)"><img src="images/Behavior_therapy2.jpg" alt="behavior therapy" name="Image7" width="311" height="137" id="Image7" border="0" align="right" /></a></div>
</div>
<div id="pageContentNoside">
<div id="sideSub">
<h2>Dog Training Services<br />
</h2>
<ul id="subnav">
<li><a href="basic-obedience.html">Basic Obedience</a></li>
<li><a href="dog-behavior-therapy.html">Behavior Therapy</a></li>
<li><a href="board-and-train-dog-program.html">Board & Train Program</a></li>
<li><a href="off-leash-training.html">Off Leash Training</a></li>
<li><a href="puppy-training-program.html">Puppy Training</a></li>
</ul>
<br />
<iframe src="//www.facebook.com/plugins/likebox.php?href=http%3A%2F%2Fwww.facebook.com%2Fpages%2F NYDogWorks%2F219268038151244%3Ffref%3Dts&width=248&height=558&show_faces=true& amp;colorscheme=light&stream=true&border_color=%23FFFFFF&header=false" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:248px; height:558px;" allowTransparency="true"></iframe>
<p><br />
</p>
<p> </p>
<p><img src="images/4449da18fc3aa2f249d17dc90ebd5531.jpg" width="145" height="136" /><br />
</p>
</div>
<div id="mainContentFeature1">
<h2>Welcome To NY Dogworks</h2>
<p><img src="images/dog-breaking-through.jpg" alt="new york dog trainer" width="136" height="170" class="h_img_float_right" />Our private one on one training lessons are done at your home by a Professional Certified Trainer and Behavior Expert. The lessons are tailored to fit what you would like done with your puppy or adult dog. <br />
<br />
We use a humane, positive and scientifically sound approach that makes it easy for you and your dog to succeed. Our instructions are broken down into simple steps so that everyone can take part in the training and be able to practice as a family. <br />
<br />
<span class="employeeName">Call Today for a Free Consultation!! </span></p>
<p>Do not have the time or patients to do the Training? Well then NY DogWorks has the answer.. We now do <a href="board-and-train-dog-program.html">Board and Train Programs</a> at our lovely facility in the home of Owner & Trainer Brian DeMartino. It is a 2 to 6 week program that is 100% guaranteed. Your dog will stay with us for no additional fee if we feel that he or she is not ready to graduate. This program can be for Puppy Training, Housebreaking, Socialization / Obedience & Manners / Behavior problems such as Aggression, Anxiety, or Fears / Advanced Off Leash Training / Personal Protection and much more..</p>
<p>We also <a href="board-and-train-dog-program.html">board dogs</a> at our facility if you are going away and want your family pet to be cared for 24/7 as if he or she was one of our own. Plenty of playtime, walks, individual attention, grooming if needed, comfortable sleeping areas with their own bed, and lots and lots of love.. </p>
<p>Let us help you have the relationship that you and your dog deserve.. <br />
<br />
<strong>We are now accepting</strong><br />
<img src="images/creditcards.jpg" width="228" height="43" alt="now accepting credit cards" /><br />
<br />
<br />
</p>
<p><br />
</p>
<p><br />
<br />
</div>
<div id="mainContentFeature2">
<form action="form.php" method="post" name="form2" id="form2"> <table width="279" border="0" cellpadding="2" cellspacing="2">
<tr>
<td width="273"><h2>Quick Contact</h2></td>
</tr>
<tr>
<td class="mainContent">Your Name</td>
</tr>
<tr>
<td><span class="style9">
<input name="forname" type="text" class="colorfieldssmall" id="forname" size="20" />
</span></td>
</tr>
<tr>
<td class="mainContent">Your Email Address* (required)</td>
</tr>
<tr>
<td><span class="style7 style9">
<input name="admail" type="text" class="colorfieldssmall" id="admail" size="25" />
</span></td>
</tr>
<tr>
<td class="mainContent">Phone Number</td>
</tr>
<tr>
<td><span class="style7 style9">
<input name="phone" type="text" class="colorfieldssmall" id="phone" />
</span></td>
</tr>
<tr>
<td><span class="mainContent">Type of Dog Training</span></td>
</tr>
<tr>
<td class="mainContent"><span class="style9">
<select name="need" class="colorfieldssmall" id="need">
<option value="select one">select one</option>
<option value="Basic Obedience">Basic Obedience</option>
<option value="Behavior Therapy">Behavior Therapy</option>
<option value="Board and Train">Board and Train</option>
<option value="Off Leash Training">Off Leash Training</option>
<option value="Puppy Training">Puppy Training</option>
</select>
</span></td>
</tr>
<tr>
<td><span class="mainContent">Comments</span></td>
</tr>
<tr>
<td><textarea name="comments" id="comments" cols="24" rows="8"></textarea></td>
</tr>
<tr>
<td><div align="left">
<input type="submit" name="submit" id="submit" value="Submit" />
</div>
</td>
</tr>
</table></form>
<h2><br />
We are available in the following areas:</h2>
<p>Long Island, Nassau county, Suffolk county, Manhattan, Brooklyn, Bronx, & Queens.</p>
<p>**We have pick up and drop off services for your pet for the boarding and boarding and training programs. <br />
</p>
<h2>Dog Training Testimonials<br />
</h2>
<p>Sending Otis to Brian for the board and train program was the best decision I ever made. After being told Otis could not be helped and that he should be put down, I was devastated. Otis has now been back from Brian's program for a few weeks and is extremely obedient and friendly. He is the same puppy we brought home a couple years ago, but calmer and without any aggression. We work on Otis' obedience daily as well as walk him and put him on the treadmill. Thanks to Brian, our dog is happy-go-lucky and more approachable. The list goes on and on of how Brian has helped the family, myself, and especially Otis. If you are having issues with your dog, especially behavior and aggression problems, my advice to you is to trust Brian. Your dog will be in good hands with a safe, reliable, responsible, dog lover that will treat your dog like his own.<br />
<span class="testimonalName"><strong><br />
Victoria Zilli<br />
</strong></span><span class="mainContent">Long Island, New York</span><br />
<br />
<a href="dog-trainer-testimonials.html">Read more dog training testimonals</a><br />
<br />
<br />
<br /></div>
<div id="breadCrumbs">
<p><a href="index.html">Home</a> > Welcome to NY DogWorks New York's Premier Dog Training Company<br />
<strong>Serving all of Long Island, Nassau & Suffolk County, Manhattan, Brooklyn & Queens</strong> <br />
</p>
</div>
</div>
<div id="footer">
<div id="footermenu">
<div id="footermenu1">
</div>
</div>
<div class="phoneNumber" id="copyright"> Copyright © 2014 NY DogWorks</div>
<div class="websiteDesign" id="sitedesigner">Long Island Website Design by <a href="http://www.wetribet.com" title="Wet Ribet" target="_blank" class="medlink">Wet Ribet</a> </div>
</div>
</div>
</div>
</body>
</html>The issue with that white space is explained by the use of relative positioning of your menu. Remember that relative positioning visually allows you to move an element, but that its "shadow" or "foot print" is retained in the document flow. So it still takes up space where it originally flowed in your content, and this causes the header image to position itself the way it does. Turn off the relative positioning of the menu to see what I mean. A simple solution is to set the #header to relative positioning, and then apply absolute positioning to the menu.
There are other issues with your code. Much of it can be simplified, and you should really stop using ID selectors from this point on, and predominantly use classes instead. The use of ID selectors ought to be limited as much as you can - they force you to write bloated convoluted code.
Try to write DryCSS (Don't Repeat Yourself).
Here is my somewhat cleaned up code. Notice I removed and simplified most of the css selectors. Some have no css properties at all anymore. And be careful that you cannot use re-use the same id selector in your html code: it will not validate. #program1 must become .program1
PS as always, please backup your files before applying these changes! Dreamweaver lacks a history/versioning feature!
*, *:before, *:after {
-webkit-box-sizing: border-box;
-moz-box-sizing: border-box;
box-sizing: border-box;
body {
margin: 0 auto;
background-color: #203610;
font-family: "Lucida Grande","Lucida Sans Unicode",Arial,sans-serif;
font-size: 100%;
color: #333;
#wrapper {
background: url("../images/wrapbg.png") repeat-y scroll 0 0 rgba(0, 0, 0, 0);
margin: 0 auto;
width: 951px;
#header {
position: relative;
#mainNav {
background: url("../images/menubg.jpg") repeat-x scroll 0 0 rgba(0, 0, 0, 0);
bottom: 0;
padding: 0 15px 0 25px;
position: absolute;
right: 0;
width: 510px;
.dropdown li { /* simplify .dropdown li !*/
float: left;
line-height: 2.2em;
.dropdown a { /* simplify ul.dropdown li a !*/
display: block;
font-weight: bold;
padding: 7px 12px;
#container {
background-color: #fff;
border-top: 6px solid #6f9f49;
#imgholder {
.program1 { /* you CANNOT have multiple id selectors sharing the same name! Use classes!!! */
float: left;
width: 315px;
rewrite this in your html:
<div class="pageContentNoside">
<div class="col-1-3 sideSub">
<div class="col-1-3 mainContentFeature1">
<div class="col-1-3 mainContentFeature2">
<div class="breadCrumbs">
</div>
.col-1-3 {
float: left;
width: 33.3333%;
padding: 25px 15px;
#sideSub {
#mainContentFeature1 {
border-left: 1px solid #ccc;
border-right: 1px solid #ccc;
#mainContentFeature2 {
#footer {
clear: both;
font-family: "Lucida Grande","Lucida Sans Unicode",Arial,sans-serif;
font-size: 0.7em;
height: 45px; -
Trouble implementing a header on Wordpress
I installed the Edge Suite Plugin. I used the shortcode to successfully implement my animation I created for my about me page. I now want to implement a header I created for my site. I uploaded the animation witth the .oam file and chose it as my "default composition". It worked, except an image is visible when it is off my stage in Edge. The file is not showing just what is visible in the stage like it should. Does anyone know how to solve this problem?
Great!!!
Here goes...
///Frame 1///
var amountLoaded:Number = _root.getBytesLoaded()/_root.getBytesTotal();
loadText.text = Math.round(amountLoaded * 100) + "%";
///Frame 2///
if(_root.getBytesLoaded() == _root.getBytesTotal()) {
_root.gotoAndPlay(2);
else {
gotoAndPlay(1); -
Hope this is the right forum, I am trying to build a custom report with a coverpage, the report is basically complete with one exception. The page footer section is causing a blank white area on the report header. The page footer has graphics and text objects in it which don't show up it's just blank. What's worse is it takes the items that it chopped out and dropped them onto the next page. WTF is happening here?
Alright, that's what I was looking for. So, if you don't want the Page Footer on the 1st page, follow Debi's advice on suppress it on Page1.
Here's how can do it though:
1) Go to the Section Expert (Report > Section Expert) and select Page Footer
2) Click on the x-2 formula icon beside the 'Suppress (No drill-down);
3) Type this formula:
Pagenumber = 1
This will suppress the Page Footer from appearing on Page 1.
-Hope this helps!
-Abhilash -
Having trouble creating clickable banner ad/header
I have gone the route already of creating an invisible button for my header. All I would like to do is be able to click it and it will return the user back to the main index file without opening a new window. When I click on the swf file there is a pointer but nothing happens. Clicking does not oppen a window, or redirect anywhere. I have the following in my actions file in the layer I created.
clickTAG.onRelease = function(){
getURL(" http://www.domain.com", "_self");
I have also tried the following as well:
on(release) {
if (clickTAG.substr(0,4) == 'http') {
getURL(clickTAG, "http://www.domain.com", "_self");
I have researched and tried changing to several others but have not had any success. I am sure I am missing something simple here but can not figure it out.I can imagine they were not used together, but I cannot imagine beyond what I already explained in my last response the differences in what you did... in the first code you use it as if it is a button's instance name. In the second you use it as if it is a string... two entirely different animals.
Normally a "clickTAG" represents data that is read in from a parameter in the html embedding code. Your actionscript extracts that string of data and processes it. So your second approach appears to be closer to what you need, though it should be directing the getURL to use the clickTag value as the url, not some fixed url string.
Your best bet to get something working is to find a clickTAG tutorial and follow it thru. Your best bet for finding one is to use Google and search terms like "AS2 clickTAG tutorial" -
Hi all, has anyone come up with a way to access all of your secure websites without having to remember millions of passwords?
Going nuts trying to remember them allSquaddie123 wrote:
Hi all, has anyone come up with a way to access all of your secure websites without having to remember millions of passwords?
Going nuts trying to remember them all
Sure, I have them all written down on scraps of paper about 4"X4"--maybe 50 total--and stored under a loose floorboard beneath the kitchen sink. If they get wet from a drain leak, I can easily dry them out in a warm oven at 200° for several minutes.
Besides that, I keep some in Keychain, but most are in Firefox saved passwords. I've never felt the need to do anything else. Where it's important, I use long random strings. And I don't let Firefox save passwords for anything that involves purchases from C Cards.
(Note: I really do have the ones written down on scraps of paper that I don't want to keep in a browser, but not really under a loose flooboard, etc.) -
Trouble getting my head around new ipod!!
Can someone PLEASE HELP me?!!!
I got a new ipod which is GREAT for music, but im having some difficulty.
My podcasts wont appear in podcast catorgory on ipod & neither will my audiobooks. I've tried the help posted on disscusion pages but still cant do it!! I just feel i cant get the most out of my lovely new little white machine!!
Is it worth buying the Ultimate Ipod Guide I've seen advertised or is it just me being stupid dumb blonde!!
PLEASE HELP!!
TinaWelcome to Apple's user-to-user discussion forums.
Are you getting the podcasts and audiobooks through the iTunes Music Store or from other sources?
I have no experience with using an iPod with Windows. I know for the Mac that at least for audiobooks from other sources, you can run a script that will allow the audiobooks to have a bookmark and will also make them be seen as audiobooks on an iPod. -
I just bought a mini-dvi-to-video adapter so I could use my TV as a display. More specifically, so I could use my VCR to record what's on my Mac's display. I also bought a headphone-to-composite cable adapter. I'm using a double-headed (is that one male or female? It's male, isn't it?) composite cable from the video adapter to the VCR. The problem is, it doesn't show up. The sound plays (and records) fine, but the video neither shows up on the TV screen nor records onto the tape. What's the problem? Both adapters are Dynex, my computer's a Late 2006 iMac (I think), the cable is WireLogic, and both the VCR and TV are Sony. Please help, thanks.
So if you eliminate the double headed splitter and plug straight into the TV, does the video still not show up?
FYI, there have been reports in the past of trouble with the Dynex video adapter. You may need to purchase the Apple OEM one. The Dynex may lack having a ROM inside of it with a proper EDID in the ROM. This is crucial to the Mac. -
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
Strange gaps in Header and Footer
Im getting gaps in the header and footer on some of my pages. Sometimes the gaps are filled with the background color of the colomn and other times they are the body color which is even weirder. An example link would be http://www.mojogar.com/pcRepair.aspx . In IE8 I get a gap on top but not the bottom. In Firefox3 the gap is on the bottom and not the top. ???
here is the markup page; (followed by the CSS)
<%@ Page Language="VB" ContentType="text/html" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/masterOne.dwt.aspx" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>Untitled Document</title>
<!-- InstanceEndEditable -->
<!-- InstanceBeginEditable name="head" -->
<!-- InstanceEndEditable -->
<link href="thrColHybHdr.css" rel="stylesheet" type="text/css" /><!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional comment */
.thrColHybHdr #sidebar1, .thrColHybHdr #sidebar2 { padding-top: 30px; }
.thrColHybHdr #mainContent { zoom: 1; padding-top: 15px; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]-->
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="thrColHybHdr">
<div id="container">
<div id="header">
<!-- end #header -->
<div class="fltlft"><img src="images/mojoLogoSmall.png" alt="Mojogar digital design & PC repair" width="172" height="41" border="0" usemap="#Map" />
<map name="Map" id="Map">
<area shape="rect" coords="2,2,172,39" href="default.html" target="_self" alt="Mojogar Home" />
</map>
</div>
<div class="fltrt"><!-- InstanceBeginEditable name="HeadRight" -->HeadRight<!-- InstanceEndEditable -->
</div>
<div class="MenuVertDiv">
<ul id="MenuBar2" class="MenuBarHorizontal">
<li><a class="MenuBarItemSubmenu" href="#">Design</a>
<ul>
<li><a href="webDesign.aspx">Website Design</a></li>
<li><a href="webDev.aspx">Website Development</a></li>
<li><a href="logo.aspx">Logo Design</a></li>
</ul>
</li>
<li><a href="#" class="MenuBarItemSubmenu">Animation</a>
<ul>
<li><a href="webDev.aspx">Flash Animation</a></li>
</ul>
</li>
<li><a class="MenuBarItemSubmenu" href="#">Support</a>
<ul>
<li><a href="pcRepair.aspx">PC Repair</a> </li>
<li><a href="virus.aspx">Virus</a></li>
<li><a href="email.aspx">Email</a></li>
<li><a href="backup.aspx">Data Backup</a></li>
<li><a href="wireless.aspx">Wireless</a></li>
<li><a href="software.aspx">Software</a></li>
<li><a href="hardwareInstall.aspx">Hardware</a></li>
<li><a href="server.aspx">Server Repair</a></li>
<li><a href="busConsult.aspx">Consulting</a></li>
</ul>
</li>
<li><a href="contact.aspx">Contact</a></li>
</ul>
</div>
<!-- end header --></div>
<div class="masterBackground">
<div id="sidebar2">
<!-- InstanceBeginEditable name="rightSidebar" -->
<div id="sidebar2">
<h4>When your computer is having troubles, have a Professional look over your system to update or repair your operating system, audit the installed programs, and check for viruses and other malware.</h4>
<!-- end #sidebar2 -->
</div>
<!-- InstanceEndEditable -->
<!-- end #sidebar2 -->
</div>
<div id="mainContent">
<!-- InstanceBeginEditable name="main" -->
<div id="mainContent">
<div class="MarginTopZero">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="580" height="300" title="Computer Support">
<param name="movie" value="images/flash/PCCollage.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<embed src="images/flash/PCCollage.swf" quality="high" wmode="opaque" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="580" height="300"></embed>
</object></div>
<h2>Don't feel alone when your computer breaks. Computer problems can leave you in the dark about what is wrong. Help is a call away.</h2>
<h4>Our tune-up and repair service consists of the following;</h4>
<li>Operating system updates</li>
<h5>Operating system updates help the security of the computer and can add features that the manufacturer has been working on to make the life of the end user easier. Updates come out as frequently as every couple weeks on some operating systems.</h5>
<li>Programs audit</li>
<h5>Many <a href="software.aspx" title="Go to our software page" target="_self">applications</a> get added over time and can slow down the performance of any PC by taking up processor and memory resources, not to mention hard drive space.</h5>
<li>Security overlook</li>
<h5><a href="virus.aspx" target="_self">Anti-virus</a> definitions need to be kept up-to-date. New viruses, spyware, trojans, and malware are always being introduced into the wild (the internet is a jungle). Anti-virus applications need to be kept updated as well. Subscriptions to paid providers can lapse and updates can be left behind for months if not years (I've seen it happen).</h5>
<li>Anti-virus fine tuning</li>
<h5>Many anti-virus programs are bloated applications and won't stop annoying the user with pop-ups and information. Many users also never know when and how often their anti-virus is scanning.</h5>
<li>Browser configuration</li>
<h5>There are literally hundreds of options in your browsers settings for security and optimization. Fine stunning these can in some cases increase surfing speed.</h5>
<li>Start-up & shut down optimizing</li>
<h5>If your like most people, your PC never starts up fast enough. Get a thorough audit of what programs and services are starting with your computer and optimize them to increase speed.</h5>
<!-- end #mainContent -->
</div>
<!-- InstanceEndEditable -->
<!-- end #mainContent -->
</div>
<!-- end masterBackground --></div>
<!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats -->
<%-- <br class="clearfloat" />
--%>
<div id="footer">
<p>Copyright Mojogar 2010</p>
<!-- end #footer --></div>
<!-- end #container --></div>
<script type="text/javascript">
<!--
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
<!-- InstanceEnd --></html>
CSS:
@charset "utf-8";
body {
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #9FEE00;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 100%;
background-color: #333;
h1 {
font-size: xx-large;
color: #000;
h2 {
font-size: x-large;
h3 {
font-size: large;
h4 {
font-size: medium;
h5 {
font-size: small;
h6 {
font-size: x-small;
p {
font-size: xx-small;
h1, h2 {
padding-top: 20px;
padding-right: 10px;
padding-bottom: 4px;
padding-left: 10px;
h3, h4, h5, h6, p {
padding-top: 3px;
padding-right: 5px;
padding-bottom: 3px;
padding-left: 5px;
li {
font-weight: bold;
ul {
list-style-type: decimal;
ol {
font-weight: bold;
a {
a:link {
color: #FFF;
a:hover {
color: #333;
background-color: #6C8CD5;
a:active {
color: #F00;
a:visited {
color: #FF4848;
/* Tips for this Hybrid layout
1. Since the side columns em-based sizing is based on the user's default font size, you will want to be sure that background graphics in the columns take that into account. Built correctly, this is more accessible for those that need larger font sizes, since the width of the columns remains proportionate. If this is undesirable with your design, simply change the width to a pixel size and be sure to change the margins on the #mainContent div accordingly.
2. Since the sizing of side columns in this layout are based on the 100% font size in the body element, if you decrease the text size overall by using a font-size: 80% on the body element or the #container, remember that the column widths will downsize proportionately. You may want to increase their widths, and the size of the #mainContent div's side margins, to compensate for this.
3. If font sizing is changed in differing amounts on each div instead of on the overall design (ie: #sidebar1 is given a 70% font size and #mainContent is given an 85% font size), this will proportionately change each of the divs overall size. You may want to adjust based on your final font sizing.
4. The #container div is not necessary for this layout at the 100% width. You may want to use it to create faux columns or limit the width of the layout.
5. It is not neccessary to have the 100% width on the #container div since, by nature, a div takes up 100% of the available space. It is here so that if you want to decrease the size of the overall container - perhaps leaving a bit of margin on each side - this will already be available for adjustment.
.thrColHybHdr #container {
width: 780px;
/*margin: 0 auto; the auto margins (in conjunction with a width) center the page if needed */
text-align: left;
padding: 0px;
margin-top: 0px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
.thrColHybHdr #header {
background-color: #C9F76F;
height: 100%;
width: 780px;
margin: 0px;
padding: 0px;
.thrColHybHdr #header h1 {
margin: 0;
padding: 0px;
/* Tips for sidebar1:
1. Be aware that if you set a font-size value on this div, the overall width of the div will be adjusted accordingly.
2. Since we are working in ems, it's best not to use padding on the sidebar itself. It will be added to the width for standards compliant browsers creating an unknown actual width.
3. Space between the side of the div and the elements within it can be created by placing a left and right margin on those elements as seen in the ".thrColHybHdr #sidebar1 p" rule.
.thrColHybHdr #sidebar1 {
width: 13em;
border-top-width: thick;
border-top-style: solid;
border-top-color: #C06;
float: left;
height: auto;
.thrColHybHdr #sidebar2 {
width: 200px;
text-align: center;
margin: 0px;
padding: 0px;
float: right;
/*.thrColHybHdr #sidebar1 h3, .thrColHybHdr #sidebar1 p, .thrColHybHdr #sidebar2 p, .thrColHybHdr #sidebar2 h3 {
margin-left: 0px;*/ /* the left and right margin should be given to every element that will be placed in the side columns */
/* margin-right: 0px;
/* Tips for mainContent:
1. If you give this #mainContent div a font-size value different than the #sidebar1 div, the margins of the #mainContent div will be based on its font-size and the width of the #sidebar1 div will be based on its font-size. You may wish to adjust the values of these divs.
2. The space between the mainContent and sidebar1 is created with the left margin on the mainContent div. No matter how much content the sidebar1 div contains, the column space will remain. You can remove this left margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends.
3. To avoid float drop, you may need to test to determine the approximate maximum image/element size since this layout is based on the user's font sizing combined with the values you set. However, if the user has their browser font size set lower than normal, less space will be available in the #mainContent div than you may see on testing.
4. In the Internet Explorer Conditional Comment below, the zoom property is used to give the mainContent "hasLayout." This avoids several IE-specific bugs that may occur.
.thrColHybHdr #mainContent {
text-align: center;
margin-right: 0px;
margin-top: 0px;
margin-bottom: 0px;
margin-left: 0px;
width: 580px;
background-color: #2A4480;
color: #C9F76F;
padding: 0px;
.MarginTopZero {
margin: 0px;
padding: 0px;
.busConslt {
height: 600px;
width: 800px;
.idea {
height: auto;
width: 100%;
.thrColHybHdr #footer {
padding: 0;
background-color: #C9F76F;
margin: 0px;
.thrColHybHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 0px; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
color: #000;
/* Miscellaneous classes for reuse */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
.fltlft { /* this class can be used to float an element left in your page */
float: left;
margin-right: 0px;
padding-left: 5px;
padding-top: 3px;
padding-bottom: 3px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
height:0;
#defMainLft {
width: 49%;
float: left;
text-align: center;
#defMainRt {
width: 49%;
float: right;
text-align: center;
.absolRgt {
position: absolute;
top: 0px;
right: 0px;
.relRgt {
position: relative;
top: 0px;
right: 0px;
.defFull {
position: relative;
height: 263px;
width: 100%;
border-bottom-width: medium;
border-bottom-style: solid;
border-bottom-color: #ff4900;
.absolLft {
position: absolute;
top: 0px;
left: 0px;
.defFullTop {
position: relative;
width: 600px;
border-top-width: thick;
border-top-style: solid;
border-top-color: #000;
margin: 0px;
.tuneUpTop {
background-color: #000;
color: #FFF;
margin: 0px;
padding: 0px;
.contactForm {
width: 470px;
height: auto;
left: auto;
right: auto;
.borderRight {
border: medium solid #A62F00;
margin-top: 0px;
margin-bottom: 0px;
margin-left: 0px;
.MenuVertDiv {
margin-bottom: 0px;
clear: both;
height: 38px;
background-color: #A62F00;
width: 100%;
.masterBackground {
background-color: #BF5930;
margin: 0px;
padding: 0px;Your HTML code contains conditional comments for IE. Try reducing or removing the extra padding and see if that helps.
/* place css fixes for all versions of IE in this conditional comment */
.thrColHybHdr #sidebar1, .thrColHybHdr #sidebar2 { padding-top: 30px; }
.thrColHybHdr #mainContent { zoom: 1; padding-top: 15px; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]-->
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
[Kernel] USB and network trouble
Hey all, i have some trouble getting my system fully running.
I have a built in 3com network card, it uses the 3c59x module in the kernel (got it build into the kernel). I also have a usb cd writer. When i start writing my network fails after sometime. I came from vectorlinux to arch. In VL it worked without a prob. Here check my dmesg output. The most interesting is at the end.
chitecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0808)
checking if image is initramfs... it is
Freeing initrd memory: 567k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI-0169: *** Error: No object was returned from [_SB_.LNKA._STA] (Node d3fdef00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKB._STA] (Node d3fdee00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKC._STA] (Node d3fded00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKD._STA] (Node d3fdec00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.FDD_._STA] (Node c12f75a0), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.COM_._STA] (Node c12f7460), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT_._STA] (Node c12f72e0), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT1._STA] (Node c12f7200), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PCC0._STA] (Node c12f7fe0), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI-0169: *** Error: No object was returned from [_SB_.LNKE._PRS] (Node c12fc780), AE_NOT_EXIST
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: Power Resource [PIHD] (on)
ACPI: Power Resource [PMHD] (off)
ACPI: Power Resource [PDOC] (off)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected]
** so I can fix the driver.
ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
acpiphp_glue: can't get bus number, assuming 0
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: AGP aperture is 256M @ 0xd0000000
vesafb: framebuffer at 0xf0000000, mapped to 0xd4900000, using 6144k, total 8192k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (66 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c905C Tornado at 0xfb00. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:05.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1516GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.0[A]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.1[b]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:05.2[D]: no GSI - using IRQ 11
uhci_hcd 0000:00:05.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:05.2: irq 11, io base 0xff80
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 06 Dec 2004
usb 1-2: new full speed USB device using uhci_hcd and address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 2: format 0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: registered mixer 14,0
usb_audio_parsecontrol: usb_audio_state at d3cb6560
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:0c.0[A]: no GSI - using IRQ 11
es1968: clocking to 48000
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
ALSA device list:
#0: ESS ES1978 (Maestro 2E) at 0xfc00, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI wakeup devices:
USB VIY0 VIY1 MODM LAN LAN2 LID
ACPI: (supports S0 S1 S3 S4 S4bios S5)
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 192k freed
Adding 40120k swap on /dev/discs/disc0/part5. Priority:-1 extents:1
Adding 128480k swap on /dev/discs/disc0/part7. Priority:-2 extents:1
Adding 128480k swap on /dev/discs/disc0/part8. Priority:-3 extents:1
Real Time Clock Driver v1.12
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Disabled Privacy Extensions on device c04cd0e0(lo)
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-1: new full speed USB device using uhci_hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: LITE-ON Model: LTR-48246K Rev: SKS7
Type: CD-ROM ANSI SCSI revision: 00
sr0: scsi3-mmc drive: 207x/48x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
usb-storage: device scan complete
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
scsi: unknown opcode 0x01
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 8000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1328(0) current 1328(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 8000049c status 0c01049c
1: @d3c972a0 length 8000049c status 0c01049c
2: @d3c97340 length 8000004d status 0c01004d
3: @d3c973e0 length 8000004d status 0c01004d
4: @d3c97480 length 80000049 status 0c010049
5: @d3c97520 length 80000049 status 0c010049
6: @d3c975c0 length 8000002a status 0001002a
7: @d3c97660 length 80000049 status 0c010049
8: @d3c97700 length 8000002a status 0001002a
9: @d3c977a0 length 8000002a status 0001002a
10: @d3c97840 length 8000004d status 0c01004d
11: @d3c978e0 length 8000002a status 0001002a
12: @d3c97980 length 8000002a status 0001002a
13: @d3c97a20 length 8000002a status 0001002a
14: @d3c97ac0 length 8000002a status 8001002a
15: @d3c97b60 length 8000002a status 8001002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1344(0) current 1344(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 8000002a status 0001002a
1: @d3c972a0 length 8000002a status 0001002a
2: @d3c97340 length 8000002a status 0001002a
3: @d3c973e0 length 8000002a status 0001002a
4: @d3c97480 length 80000036 status 00010036
5: @d3c97520 length 80000036 status 00010036
6: @d3c975c0 length 80000036 status 00010036
7: @d3c97660 length 80000036 status 00010036
8: @d3c97700 length 80000036 status 00010036
9: @d3c977a0 length 80000036 status 00010036
10: @d3c97840 length 80000036 status 00010036
11: @d3c978e0 length 80000047 status 0c010047
12: @d3c97980 length 80000082 status 00010082
13: @d3c97a20 length 8000004e status 0001004e
14: @d3c97ac0 length 8000004e status 8001004e
15: @d3c97b60 length 8000004e status 8001004e
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1360(0) current 1360(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 80000080 status 00010080
1: @d3c972a0 length 8000004a status 0001004a
2: @d3c97340 length 80000055 status 0c010055
3: @d3c973e0 length 8000004a status 0001004a
4: @d3c97480 length 8000002a status 0001002a
5: @d3c97520 length 8000002a status 0001002a
6: @d3c975c0 length 8000002a status 0001002a
7: @d3c97660 length 80000055 status 0c010055
8: @d3c97700 length 8000002a status 0001002a
9: @d3c977a0 length 8000006c status 0001006c
10: @d3c97840 length 80000036 status 00010036
11: @d3c978e0 length 80000036 status 00010036
12: @d3c97980 length 80000049 status 0c010049
13: @d3c97a20 length 80000051 status 0c010051
14: @d3c97ac0 length 80000049 status 8c010049
15: @d3c97b60 length 80000051 status 8c010051
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1376(0) current 1376(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 80000049 status 0c010049
1: @d3c972a0 length 80000051 status 0c010051
2: @d3c97340 length 800000ae status 000100ae
3: @d3c973e0 length 800000ae status 000100ae
4: @d3c97480 length 80000042 status 00010042
5: @d3c97520 length 8000006b status 0001006b
6: @d3c975c0 length 8000006b status 0001006b
7: @d3c97660 length 80000080 status 00010080
8: @d3c97700 length 8000004e status 0001004e
9: @d3c977a0 length 80000080 status 00010080
10: @d3c97840 length 8000004e status 0001004e
11: @d3c978e0 length 80000080 status 00010080
12: @d3c97980 length 80000080 status 00010080
13: @d3c97a20 length 8000006b status 0001006b
14: @d3c97ac0 length 80000051 status 8c010051
15: @d3c97b60 length 8000004a status 8001004a
eth0: Resetting the Tx ring pointer.
eth0: no IPv6 routers present
When my network is down, the onlything to restore is is rebooting my computer. Restarting the network daemon does not work. Currently i don't have hotplug running, but with hotplug i encounter the same problem.
I hope anybody can help me.
Greetinx AtzeIt looks like the problem is with ACPI or you have a hardware IRQ conflict..
check for a bios update for your Motherboard and check the bios settings.
It might also help if you moved network card to another pci-slot.
Maybe you are looking for
-
Error when i try to run ARI_INVOICE_PAYMENT_PAGE.xml on local jdeveloper
Hi, I brought all the files from server to local machine and when I try to run ARI_INVOICE_PAYMENT_PAGE.xml the project, I am getting the following error messages. Error: Error(320,17): final method getClass() in class java.lang.Object cannot be over
-
Specify the output date to be of a Specified date format.
DateFormat formatter = new SimpleDateFormat("MM/dd/yyyy"); String dateString = "12/12/2006"; Date dateStringInDateFormat = formatter.parse(dateString); System.err.println("the date"+dateStringInDateFormat); String str1 = for
-
Hi, i'm running a query and having after a lot of time this error in the alert: ORA-000060: Deadlock detected. More info in file /OraBin/admin/dev/bdump/s002_5490_dev.trc. I checked the trace file and it says: DEADLOCK DETECTED Current SQL statement
-
How to get back the App Store icon
After update I can not get App Store nor get back my already downloaded games
-
I just bought an Airport Extreme and so did my sister who lives upstairs. She setup first and now when I try to setup mine only hers shows up in the Airport Utility. I've tried numerous times but the utility can not find my base. I've reset it too