Hearing problems in the middle of a call

ive having problems with my call lately , iam in the middle of a call and the other part begin to hear a kind of static meanwhile i can hear them clearly, its weird because it happens quen the headsets are plugged too, but when i put the mophie juice pack on the phone the problem disapears, i wonder why this is happening and if theres a software update to relieve my phone of the static noise=?

It may be that the phone is set to remind you when your balance falls below a certain amount. Its usually $5.00, I have been on the phone for long lengths of time and have never had this happen. Check under Setting and Tools and sound or voice settings. Also notifications settings. There mights be somewhere that says "remind me"

Similar Messages

  • I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

    I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

    I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
    I might try a restore and see if it helps...

  • I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make

    I have just bought my iphone 4S 32GB from three weeks ago and 'am facing a problem that in the middle of my calls it suddenly says call failed and it keeps on doing it every call i make .. I Don't know what to DO Please anyone help me i've got OS 5.0.1 and it's factory unlocked i've boughted from USA and it was sent to me where 'am living now in Egypt ...ANy Helpppppppppp Pleasee

    try general>settings>reset>reset all settings and start up as an new phone.

  • HT204368 I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am no

    I recently upgraded from an iPhone 4s to an iPhone 5.  I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s.  However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call.  I am not certain whether it is a full disconnect or just an audio loss.  The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens.  All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
    Is is important to note that I am not the only one experiencing this issue:
    This is a link to someone using the Motorola H19txt headset experiencing the same issue
    https://forums.motorola.com/posts/94ac15ad7c
    If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
    http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
    Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
    Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
    I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue.  I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web.  Hopefully they are already aware, but if not, maybe they will see i here.

    here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
    There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
    Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

  • People cannot hear me at the start of our call on the Iphone 4s?

    People cannot hear me at the start of our call on the Iphone 4s. What could be the problem? IOS? Home button? Lag when I swipe?
    ONLY when I am getting a call, I will swipe the home button and the awnser option will lag a little bit, therefore the caller cannot hear me right away. After saying "Hello" the second time, everything returns to normal. I have tried everything and I am not sure what the problem is? It cannot be hardware since Skype, Memo, Facetime, all work perfectly. Everyone on these threads has the problem from both sides, while I only have it when I receave calls. I have tried it with head-phones and it does not fix the problem. What can I do? Will it be fixed in the upcoming IOS?
    Although its a small problem that doesn't effect other parts of my phone, I would like to find someone who faces the same problem.
    Thanks

    http://support.apple.com/kb/TS2802

  • Can I transfer a call to another Verizon cell in the middle of a call?

    Does anyone know if it is possible to transfer a call to another Verizon cell in the middle of a call?  Not call forwarding, but transfer during the call?
    So, I answer the phone and talk to the caller.  Then, I want to transfer the caller to Joe on another cell phone.  Is there any way to put the caller on hold and transfer the call to Joe's Verizon cell?
    My understanding is that call forwarding only works for the initial phone call - the call forwards to another number, but it won't work in the middle of a call. 
    Any help is appreciated!
    Thanks

    All the older Nokia phones you answer a call – you can put it on hold – call someone else, tell him/her that you are transferring a call – press  4 and hang up. Those two can continue the conversation together.
    That’s what I’m looking for.
    With Lumia I don’t want to be the 3rd wheel in the conversation... 
    I haven't found the way to end the call so that the others could continue (not even with conference call)

  • My iPhone 4S will blast my text tone in my ear when I'm in the middle of a call

    Is there any way to keep my text tone without having music blast out my eardrums for thirty seconds while I'm in the middle of a phone call

    Your nano is pausing playback when the screen goes dark (Either when it goes dark on its own or when you click the sleep/wake button). The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i

  • Pearl suddley locks up in the middle of a call

    My phone has done this several times. right in the middle of the call I lose the call and look down at the screen and it is clear and locked up and nothing can be done but removing the battery. any ideas?
    Doug

    Hi affygio,
    Sorry to hear you are having issues with your iPhone.
    These specific troubleshooting steps may help.
    Always backup your device before troubleshooting.
    iPhone: Hardware troubleshooting
    Display shows a white screen
    Try turning iPhone off and then on again.
    If the iPhone will not turn off, try to reset it.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't work, try restoring the device.
    - Hope this helps ...
    - Judy

  • Problem in the Middle name ( F4 help)

    Hi Gurus,
    I am enhancing the standard F4 help of Personnel Number in PA30.My work is to add Middle name with the Last name - First name tab.I had added the Middle name in the search help PREMN and I had copied the M_PREMN selection method to Z_M_PREMN with middle name as an additional field. The problem I face is when I am giving the Middlename in the F4 of Personnel Number ( PA30) it is case-sensitive.
    For Example I have middle name stored as Daniel in IT0002. When I am entering the Middlename as Daniel in the field Middlename in the F4 help of Personnel Number I am getting the corresponding output. But when i give it as DANIEL or DAniel it doesnt work.
    How to resolve this issue?Please help.

    Hi,
    I think you should try translating to either upper or lower case both the search term and the entry in It0002.
    Rgds,
    Hema

  • SBS 2011; Exchange ActiveSync problems in the middle of a migration

    Hi
    We're in the middle of a migration from SBS 2003 to SBS 2011 and are stuck in the lengthy process of moving users' mailboxes.
    At this point, I have about 20 percent of the users' email on the SBS 2011 box, and the rest still on the SBS 2003 box.
    Right now I have to quickly deal with an issue that's cropped up with Exchange ActiveSync:
    I ran the Connectivity Analyzer for a user (this one's box had been migrated) and got the error below. By the looks of the error, I don't think it matters where the mailbox happens to reside ...
    The SBS 2011 box has been set up using a migration install and the procedures listed in the MS migration docs.
    At the rate we're going, it's still going to take a while to migrate these mailboxes. (The fact that they began tonight was actually an accident.) If mobile users can't get their mail, I'm going to have a big mess on my hands ...
    What do I need to do to get this running properly for all users?
    Thanks
    CL
    An ActiveSync session is being attempted with the server.
      Errors were encountered while testing the Exchange ActiveSync session.
     Additional Details
    Elapsed Time: 793 ms. 
     Test Steps
     Attempting to send the OPTIONS command to the server.
      The OPTIONS response was successfully received and is valid.
     Additional Details
    HTTP Response Headers:
    MicrosoftOfficeWebServer: 5.0_Pub
    Pragma: no-cache
    Public: OPTIONS, POST
    Allow: OPTIONS
    MS-Server-ActiveSync: 6.5.7638.1
    MS-ASProtocolVersions: 1.0,2.0,2.1,2.5
    Content-Length: 0
    Date: Fri, 30 May 2014 08:49:48 GMT
    Server: Microsoft-IIS/6.0
    X-Powered-By: ASP.NET
    Elapsed Time: 205 ms. 
     Attempting the FolderSync command on the Exchange ActiveSync session.
      The test of the FolderSync command failed.
     Additional Details
    An HTTP 403 forbidden response was received. The response appears to have come from Unknown. Body of the response: <body><h2>HTTP/1.1 403 Forbidden</h2></body>
    HTTP Response Headers:
    MicrosoftOfficeWebServer: 5.0_Pub
    Pragma: no-cache
    MS-Server-ActiveSync: 6.5.7638.1
    Content-Length: 44
    Content-Type: text/html
    Date: Fri, 30 May 2014 08:49:48 GMT
    Server: Microsoft-IIS/6.0
    X-Powered-By: ASP.NET
    Elapsed Time: 588 ms. 

    Hi --
    Neither of the Exchange servers is publicly listed as the mail handler for this domain. Mail is preprocessed by a cloud spam filtering service before coming down. So I expect no changes in MX records -- not even a change in the spam filter's delivery IP
    address, since that points to my firewall. I'll forward SMTP traffic to the new server when the time comes.
    I was told by MS that moving the mailboxes would not disrupt anything as long as both SBS boxes were up and running. And despite what the Connectivity Analyzer showed, people in this office have been receiving email on their mobile phones all day. I've had
    a few sporadic reports of people supposedly not getting email on their smartphones, but I can't see how anything I did (basically just move mailboxes at this point) could allow some people's phones to get mail while others' can't, when everyone was getting
    mail yesterday.
    I also have an odd report from someone who claims that his mobile phone is processing email just fine, but his MacBook running Entourage suddenly can't connect.
    Oh well ... The day is over (at least for the workers). Hopefully by the time the workers return on Monday, I'll be back to having just one SBS box on the network.
    The mailboxes are being moved A LOT faster than any of the documents I read warned me they would. One document said that a 75 GB database could take close to 48 hours to transfer. And this server's Exchange database was 67 GB ... But last night's
    "accident" (I thought I was only prepping a new database when in fact the machine was actively moving email into it) resulted in about 40% of the mailboxes being completely moved by 8 a.m.. And since 5 p.m., when I restarted the move requests,
    the machine has completed the moves of about 20% more mailboxes. So I expect this part to be over probably by early morning. (The ones that remain are the really big ones -- still, after I spent a week doing mailbox housekeeping.)
    I was also warned about the lengthy conversion requirements for the public folders. I transferred those last weekend. The whole process was over with in less than four hours. Go figure ...
    (The public folder transfer did have an annoying side effect -- I kept receiving warning after warning via email from the SBS 2003 box about a high number of items in Exchange's send queues ...)
    Thanks
    CL

  • Texts alerts while in the middle of a call!!

    Is there a way to silence text alerts while you are in the middle of a conversation other than the manual side button? I would like for it to be automatic that way i don't forget. If so I would greatly appreciate any help on how to do this. I cannot explain how annoying it is when I am in the middle of an important phone conversation and the chime of my text goes off in my ear not only do I get a loud chime I also miss part of the information.

    No. Sorry.
    You can leave feedback for Apple at:
    http://www.apple.com/feedback

  • Email problems and the incompetence of BT call cen...

    How come one can come on this forum and read threda after thread of people complaining about intermitant email problems yet when you ring the call centre you are fobed off with the usual excsue that it is your settings that are the problem.
    For me, it was only after wasting 30 minutes of my time, in which the memebr of the 'technical' team tried to look at my settings, this involved him entering the wrong information on several occasions and needing to be corrected by myself. That the person admitted that there had been a problem.
    What is interetsing is that I explained that i receive emails through my Ipad and sometimes collect by BT Yahoo, as well as my PC, none of which were working and all of which require the setting to lon on to the serever to be set individually, I also made it quite clear that was an intermitant problem, but that today it had lasted 8 hours. Yet still we went this through redicilous rigmorole of playing with the settings on my PC - why?
    The gentlemen then admitted there was a problem with BT yahoo, so very unimpressed I asked to speak to the complaints department. I was put through to a 'manager' and I use that term guardedly because he was no more competent then the first person I spoke to. He said that perhaps his colleugue had failed to check the system status recently, I suggest that he had not chceked it for at least 8 hours as that is how long my emial has been down today! This man then began the fob of speech, refusing to put me through to someone who would help and saying he had all the authority to help me, afetr several questions it became clear he had no authroity whatsoever, he could not talk about bills, he could even get me the details of the complaints department in Durham, apparently it deos not exist!
    Anyway I am sharing my story to see if anyone thinks that the call centre that BT farm their work out to are entirely incompetent and are seriously in need of some training, the first thing they need to do is actually listen to the customer and not begin the decision tree they think roughly addresses the problem.
    'ah email'
    step 1 - click 'email connection problem'
    step 2 - check settings
    It just might be that some of us do actually know what we are talking about, and have had experience setting up call centers so we know hoe they work.
    Please, please allow us to speak to people who will help us with our problem it is the only way you will retain customers in a competive telecommunications sector.  
    Just stop fobbing us off with the line, 'it must be your settings' but admit you have a problem and get it fixed!!
    Ironically as I type 'fixed' yet another 0x800ccc92 falshes up on screen, showing that my issues still remain unresolved.

    Hi Cross_Bug. 
    First of all i too know how frustrating it can be being put through to some one who is less than compitent with there job. However with the steps that they do it is required before they can use any other protocols so unfortunately you would just have to bare with them. 
    Second of all if you would like to write in to complaint about a certain product or service, then you can do so in writing to our corespondence center the adress is as follows; 
    BT Correspondence Centre
    Providence Row
    Durham
    DH98 1BT
    Other alternatives for complaints are e-mailing in through the website via webform. http://bt.custhelp.com/app/contact_email/c/5642,5645 They aim to give a reply within 24-48 hours of receiving the form and will aim to do so satisfactory. 
    I hope i have been informative and it aids into the problem being fixed for yourself. 
    If this answer has helped please mark it up

  • My phone turns mute when in the middle of a call?

    Latly when I'm talking on my iphone4 my phone mutes and the people on the other end can't hear me in mid conversation.  If I put the phone back down to look at it then I have to go to speaker phone.  What is going on , my phone is 2 weeks old!

    This used to happen to me when the iPhone 4 first came out but after an update it was resolved.  I think there was a proximity sensor issue with the old iOS code but it seems to be better now.  It hasn't happened with me running iOS5.
    Test putting your hand near the proximity sensor while on a call and see if you screen goes dim, if not then I would bring it back to the Apple store and see if they would replace the phone since you've only had it for 2 weeks.

  • My iPhone4 has shut itself off while i was in the middle of a call and is vibrating and wont turn off, how can i  get it  to stop, PLEASE HELP?!

    It's really annoying and this is the second time its happened.

    I would get it looked at, that sounds more like a hardware problem.

  • Phones constantly turn off in the middle of phone calls, texting or web browsing; help!

    My daughter and I both have BlackBerry Curves that are approxiamately 2 years old.  They are constantly shutting down during phone calls and web browsing even though the battery shows a full charge. When they finally finish rebooting the battery indicators show that they are completely drained and need to be recharged.  The screens freeze regularly and the little clock icon keeps spinning whenever we try to do the most basic functions.  I can't wait to upgrade to different phone but can't afford to buy four of them at once.  What can we do to get by until we upgrade?

        Wow Scotty1964. It's certainly strange that both phones are doing the same thing! Do you both share the same chargers? It may be as simple as the charger needing to be replaced if the phone is not getting the best charge to begin with. It's also possible that both devices downloaded something in common to cause the quirky behavior. Did this start after an update was installed on the phone? Or maybe an application was updated or installed? If just removing an application doesn't help, you may find a Master Reset http://bit.ly/zK7LOX may be the best way to purge the phone of the pesky trouble and have working devices in your hand until you're ready for those upgrades.
    And I know money is tight, especially when you're looking to upgrade so many devices at once. When you have a chance, visit http://bit.ly/zpAY1E to check out all the online specials for phones. An upgrade may be more affordable than you think.
    Thank you
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

Maybe you are looking for