Hello Guru's Error MSG while creating Material Type HERS

Hello Guru's,
While creating material type HERS the system is showing the following error *"The field orign acceptance is defined as a required field; it does't contain an entry'"* will any one give solution.
even i have filled orign field in info record also still it is giving same error message, will anyone give solution.
full points for the answer.

hers is for the mpn
note the techincal name of that field and then go to oms9 and there make that filed for the filed selection key of hers as optional
u can get the field selcton key of hers from the tcode oms2

Similar Messages

Error msg . while creating a GR w.r.t. PO --"ENTER A VALID TRADING PARTNER"

Hi ,
While creating a GR w.r.t. Purchase Order (MB01) getting a following msg:
"ENTER A VALID TRADING PARTNER "
In Vendor Master : Partner function has the vendor details
OA     Ordering Address
VN     Vendor
PI     Invoice presented by
Any thread would be helpful .
regards,
chait

Hi ,
THere is no entry in field :Trading partner LFA1 -
VBUND
ALso the vendor has acccount group : RMIT : Remit to Address
PArtner functions are maintained in vendor master viz. OA ,VN , PI .
regards,
chait

Error occured while creating MATERIALIZED VIEW

I created as below:
CREATE MATERIALIZED VIEW LOG ON FIN.F_CV_HDR
WITH ROWID, SEQUENCE, PRIMARY KEY;
CREATE MATERIALIZED VIEW LOG ON FIN.F_CV_DTL
WITH ROWID, SEQUENCE;
REATE MATERIALIZED VIEW F_GL_SMRY_MVW
PARALLEL
BUILD IMMEDIATE
REFRESH FAST ON COMMIT AS
SELECT * FROM
SELECT
F_CV_HDR.ROWID "HDR_ID",
CAST(NULL AS ROWID) "DTL_ID",
cah_dsm_trm_tr_code gsv_dsm_trm_tr_code,
cah_dsm_dcmnt_type gsv_dsm_dcmnt_type,
cah_cv_nmbr gsv_dcmnt_nmbr,
cah_lcm_lctn_code dsv_lcm_lctn_code,
cah_dsm_dcmnt_srs gsv_dsm_dcmnt_srs,
cah_cv_date gsv_dcmnt_date,
'G' gsv_sub_code_type,
DECODE(cah_dsm_dcmnt_type,'CPV',0,'CRV',cah_net_amnt) gsv_amnt_dbtd,
DECODE(cah_dsm_dcmnt_type,'CPV','C','CRV','D') gsv_dr_cr_indctr,
cah_net_amnt gsv_amnt,
DECODE(cah_dsm_dcmnt_type,'CPV',cah_net_amnt,'CRV',0) gsv_amnt_crdtd,
cah_asm_sbldgr_code gsv_sub_code,
CAH_RMRKS GSV_RMRKS,
CAST(NULL AS VARCHAR2(3)) GSV_CRS_RFRNCE_TYPE,
CAST(NULL AS VARCHAR2(3)) GSV_CRS_RFRNCE_TR_CODE,
CAST(NULL AS NUMBER(10)) GSV_CRS_RFRNCE_NMBR,
CAST(NULL AS VARCHAR2(6)) GSV_FCM_CRNCY_CODE,
CAST(NULL AS NUMBER(6,3)) GSV_EXCHNGE_RATE,
CAST(NULL AS NUMBER(13,2)) GSV_FRGN_CRNCY_AMNT,
CAST(NULL AS DATE) GSV_DATE_FROM,
CAST(NULL AS DATE) GSV_DATE_TO,
CAST(NULL AS NUMBER(7)) GSV_RJH_NMBR,
CAST(NULL AS VARCHAR2(3)) GSV_PJC_SRS,
CAST(NULL AS NUMBER(7)) GSV_PJC_NMBR,
CAST(NULL AS NUMBER(3)) GSV_PJC_EQPTMNT_SRL,
CAST(NULL AS VARCHAR2(5))GSV_PJC_EXPNSE_HEAD_CODE,
CAST(NULL AS VARCHAR2(3)) gsv_dpm_dprtmnt_code,
cah_asm_amm_main_code gsv_amm_main_code,
CAH_LCM_LCTN_CODE_BOOK GSV_LCM_LCTN_CODE_BOOK,
CAST(NULL AS NUMBER) gsv_dr_cr_advce_srl,
0 gsv_dcmnt_srl_nmbr,
cah_trnsctn_with_indctr gsv_trnsctn_with_indctr,
cah_trnsctnr_code gsv_trnsctnr_code,
0 gsv_net_tds_amnt,
to_number(TO_CHAR(cah_cv_date ,'YYYY')) gsv_year,
to_number(TO_CHAR(cah_cv_date ,'MM')) gsv_mnth,
cah_cv_tmpry_nmbr gsv_tmpry_nmbr,
CAH_SRCE_INDCTR GSV_SRCE_INDCTR,
CAST(NULL AS VARCHAR2(50)) GSV_BILL_NMBR,
CAST(NULL AS DATE) gsv_bill_date,
cah_pay_rcve_name gsv_pay_rcve_name
FROM f_cv_hdr
WHERE CAH_FNCL_CLSRE_INDCTR = 'N'
AND cah_avlble_indctr = 'Y'
UNION ALL
SELECT
F_CV_HDR.ROWID "HDR_ID",
f_cv_dtl.ROWID "DTL_ID",
cah_dsm_trm_tr_code gsv_dsm_trm_tr_code,
cah_dsm_dcmnt_type gsv_dsm_dcmnt_type,
cah_cv_nmbr gsv_dcmnt_nmbr,
cah_lcm_lctn_code dsv_lcm_lctn_code,
cah_dsm_dcmnt_srs gsv_dsm_dcmnt_srs,
cah_cv_date gsv_dcmnt_date,
cad_sub_code_type gsv_sub_code_type,
DECODE(cad_dr_cr_indctr, 'C',0,'D',cad_amnt) gsv_amnt_dbtd,
cad_dr_cr_indctr gsv_dr_cr_indctr,
cad_amnt gsv_amnt,
DECODE(cad_dr_cr_indctr, 'D',0,'C',cad_amnt) gsv_amnt_crdtd,
cad_sub_code gsv_sub_code,
cad_rmrks gsv_rmrks,
cad_crs_rfrnce_type gsv_crs_rfrnce_type,
cad_crs_rfrnce_tr_code gsv_crs_rfrnce_tr_code,
CAD_CRS_RFRNCE_NMBR GSV_CRS_RFRNCE_NMBR,
CAST(NULL AS VARCHAR2(6)) GSV_FCM_CRNCY_CODE,
CAST(NULL AS NUMBER(6,3)) GSV_EXCHNGE_RATE,
CAST(NULL AS NUMBER(13,2)) gsv_frgn_crncy_amnt,
cad_date_from gsv_date_from,
cad_date_to gsv_date_to,
cad_rjh_nmbr gsv_rjh_nmbr,
cad_pjc_srs gsv_pjc_srs,
cad_pjc_nmbr gsv_pjc_nmbr,
cad_pjc_eqpmnt_srl gsv_pjc_eqptmnt_srl,
cad_pjc_expnse_head_code gsv_pjc_expnse_head_code,
cad_dpm_dprtmnt_code gsv_dpm_dprtmnt_code,
cad_amm_main_code gsv_amm_main_code,
cah_lcm_lctn_code_book gsv_lcm_lctn_code_book,
cad_dr_cr_advce_srl gsv_dr_cr_advce_srl,
cad_cv_srl_nmbr gsv_dcmnt_srl_nmbr,
cah_trnsctn_with_indctr gsv_trnsctn_with_indctr,
cah_trnsctnr_code gsv_trnsctnr_code,
0 gsv_net_tds_amnt,
to_number(TO_CHAR(cah_cv_date ,'YYYY')) gsv_year,
to_number(TO_CHAR(cah_cv_date ,'MM')) gsv_mnth,
cah_cv_tmpry_nmbr gsv_tmpry_nmbr,
cah_srce_indctr gsv_srce_indctr,
CAST(NULL AS VARCHAR2(50)) GSV_BILL_NMBR,
CAST(NULL AS DATE) GSV_BILL_DATE,
cah_pay_rcve_name gsv_pay_rcve_name
FROM f_cv_hdr,
F_CV_DTL
WHERE CAH_FNCL_CLSRE_INDCTR = 'N'
AND cah_avlble_indctr = 'Y'
AND cah_lcm_lctn_code = cad_cah_lcm_lctn_code
AND CAH_DSM_DCMNT_TYPE = CAD_CAH_DSM_DCMNT_TYPE
AND cah_cv_tmpry_nmbr = cad_cah_cv_tmpry_nmbr);
Giving below error:
==================================================
ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
12054. 00000 - "cannot set the ON COMMIT refresh attribute for the materialized view"
*Cause:    The materialized view did not satisfy conditions for refresh at
commit time.
*Action:   Specify only valid options.
==================================================

*Action: Specify only valid options.

MG144 Error Messages while creating Material Master

Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VR

Go through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing

Error While Creating Materialized View

Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) desc

Hi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Error Message no. MM214 while creating material master

Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards

Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P

Screen sequence error while creating material.

Respected Gurus,
While creating material, i am getting the following error:
The data screen descriptions are missing for screen sequence EH
(Message no. MM329)
Looks like screen set up issue.
How do I solve this??
Please help.
Jaideep

Jaideep,
Check in other logon language like EN or DE.
You might want to check with basis consultant if all text's are migrated into your logon language.
If the screens are not standard, texts might only exist in developer logon language.
Close message if solved.
regards,
Edgar

Error while creating Materialized View step 3 of 6 using wizard

have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group using wizard there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Error while creating Materialized View step 3 of 6

I have oracle 9i Rel 1 on Windows 2000 server. Master Site has been setup. Database links are created at Materialized view site. But while creating Materialized View Group there is following error on step 3 of 6.
Statement:----------------
/*OracleOEM*/ SELECT 1 FROM SYS.dba_constraints@masterdbname WHERE OWNER='username' and table_name='tabname' AND constraint_type='P'
Stack Trace:----------------
ORA-00942: table or view does not exist.
ORA-02063: preceding line from masterdbname.
All parameters for replication are correct.
Please help me early.
Thanks

Hello,
In the masterdbname, logging as sys user, you must grant select permission on sys.dba_constraints view to mvadmin_dbname user (where dbname is the replicated database name).
Regards,

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
Any idea what I should do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

ERROR Message while creating Rebate condition record T code VBO1

Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
siva

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Getting error msg while inserting a record

HI
Am getting error msg while am inserting a new record. Am unable to view the data that i inserted in to database. If any one can help in sorting of the problem plz help. I used the following code in Application Module(AM) and Controller(CO)
processRequest()
-- am.invokeMethod("insertmethod");
processFormRequest()
-- if(pageContext.getParameter("Create")!=null)
-- am.invokeMethod("savemethod");
In AM Code
public void insertmethod()
EOVOImpl vo=getEOVO1();
if(!vo.isPreparedForExecution())
{ vo.executeQuery(); }
Row ro=vo.createRow();
vo.insertRow(ro);
ro.setNewRowState(Row.STATUS_INITIALIZED);
public void savemethod()
{ OADBTransaction oa=getOADBTransaction();
oa.commit(); }
Error
Attribute SummaryFlag in kiInsertAM.kiInsertEOVO1 is required

Hi,
Either on the form you don't have SummaryFlag field or you forgot to map VO attribute i.e. SummaryFlag to that field.
If you don't have SummaryFlag field on form then you need to set it programatically before committing record.
Please check and let us know.
Regards,
Mukesh Uchaniya

Hello Guru's Error MSG while creating Material Type HERS

Similar Messages

Maybe you are looking for