Hello I had the problem I had bough 2 films the first film load so slowly after 11 hours it has not even had 60MB from 3GB and the second film finished in 1 hour it has 1,7 GB

What is up with the Download. Why the is second download so fast and the first so slowly

Well... too late :-)... as I said, it only crashed me once, and I really don't know why. I see that another thread is running, "Acumulating metadata" that I would like to stop, but it doesn't seem to stop. So far everything has been running smoothly, so I expect the 65% that still needs processing will end correctly.
If I get some problem I'll with smaller batches... but I sure hope this ends by itself. I still get the creeps of thinking of going picture by picture as I did some days ago trying to fix my library import issues...

Similar Messages

  • I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all,  not even if left over night and the next day and night, still nothing.

    I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened  I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

    Is your battery dead or alive?
    If the battery is dead, we must find out if it is:
    1. Charger problem
    2. Cable problem
    3. Docking port problem
    4. Wall socket problem

  • After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping

    After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

    Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
    Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
    and http://www.apple.com/support/ipod/service/battery/

  • I got new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

    Igot new iphone it had a problem of sleep/off button not working i replaced from care. now the replaced product had a problem that home button not working properly now what i want to do

    Hello, krishna kumar.j. 
    Thank you for visiting Apple Support Communities.  
    I understand that you are experiencing and issue with your Home button.  Here are the troubleshooting steps when experiencing this.  
    Get help with buttons and switches on your iPhone, iPad, or iPod touch
    http://support.apple.com/en-us/HT203017
    Cheers, 
    Jason H.  

  • Hello congratulations for the work you have been developing. The iCREATE has helped me greatly improve my Mac and better understand some applications. Recently my iPhoto has given me problems and I do not realize what is happening. When I double click a p

    Hello congratulations for the work you have been developing. The apple support has helped me greatly improve my Mac and better understand some applications. Recently my iPhoto has given me problems and I do not realize what is happening. When I double click a photo it does not appear ... or rather the background is black and only the zoom window appears. How to solve this? I've done a restoration of the library, but the problem remains. Thanks and good job.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I purchased a book from ibooks and the book had content from a different book

    I purchased a book from ibooks and the book had content from a different book
    Purchased: "Mourhino Further Anatomy of a Winner" by Patrick Barclay
    Got: "Soul Beach" by Kate Harrison

    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance

  • Hello. I just know the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new customers. I need to know how to insert a new customer (square) and it already comes in alphabetical order on the page.

    Hello.
    I just know the muse and I need an organization of customers in alphabetical order. The problem is that you will always get new customers. I need to know how to insert a new customer (square) and it already comes in alphabetical order on the page. The site will be like in the link below, and each client will be a window of these: http://www.connary.com/. I look back.
    A hug, Murilo.

    I believe you are referring to thumbnail image rectangles as customers on page ? not exactly customer database ?
    You can add rectangle with different effects with mouse rollover state and regarding adding new ones , you would need to do that manually in design mode .
    Thanks,
    Sanjit

  • HT1766 I've just purchased an Iphone 5c. I have chosen the restore from iCloud and the phone has now restarted to complete the restore. It has been 3 hours and the progress bar has not moved.

    I have chosen the restore from iCloud and the phone has now restarted to complete the restore. It has been 3 hours and the progress bar has not moved. I have now tried to reload again by holding the sleep etc, to no avail

    If all you want is your old photos, you could backup your new phone using iTunes, then restore it from your iCloud backup, import the old photos to your computer, then restore it from the backup your made in iTunes returning your newer data to your phone.  If you want your old photos on your phone, sync them there from your computer using iTunes.  The process would look like this:
    Connect your phone to your computer, when it appears in iTunes on the left sidebar right-click on it and select Transfer Purchases; right-click again and select Backup.
    Disconnect from your computer and go to Settings>General>Reset>Erase All Content and Settings to return it to new
    Go through the activation setup, choosing to Restore from iCloud backup.  Make sure your phone is plugged into a charger and has access to wi-fi as this can take hours to complete.
    When complete, without connecting your phone to your computer, open iTunes and go to Preferences.  On the Devices tab check "Prevent...from syncing automatically"
    Now import the old photos to your computer (see http://support.apple.com/kb/HT4083)
    When done, open iTunes, right-click on the name of your phone on the left sidebar and select Restore from Backup, choose the backup you made in step 1.
    Go to the Photos tab and select the photos you want to sync to your phone and sync.

  • I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • The Battery in my laptop has been replaced twice and this is the third time the battery has swollen up. Since the first time it was swollen I have asked the reason but Apple has not come up with a reason and just replaced it. Second time also the ser

    The Battery in my laptop has been replaced twice and this is the third time the battery has swollen up.
    Since the first time it was swollen I have asked the reason but Apple has not come up with a reason and just replaced it.
    Second time also the service centre replaced the battery but were unable to give me a reason.
    I had asked them to replace the laptop as this has been happening repeatedly and seems to be something with the laptop
    otherwise why should every battery they put swell ?
    This is the third time this has happened. And now they refuse to replace the battery or the laptop also.
    What is the solution?

    Make an appointment at the Genius Bar of an Apple store and press the problem. Elevate to store manager if necessary. Maybe the charging circuits are defective resulting in overcharging which is causing the battery problem.
      Apple Retail Store - Genius Bar

  • InCopy workflow in InDesign: Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?

    The situation:
    We are working with the InCopy feature (checking in and checking out ICML files).
    The problem:
    I might have saved a document with an ICML file still checked out.
    The question:
    Is there a way to find out which document was saved with the ICML file still checked out?
    or in other words:
    Is there a way to find the document in which an ICML file has NOT been checked IN again before saving the doc?
    Thanks for any help!

    Hello Sumit Singh,
    thank you for your answer and your reasonable recommendation. Unfortunately, this only works when the ICML content is used in one INDD file. In our case, we use ICML content in multiple docs (various manuals with the same safety instructions, warranties, adresses etc.).
    So, is there a way to trace back where an ICML has been used?
    Is it possible to find out in which document the ICML is still checked out?

  • HT5639 I have downloaded Windows 8 on my Mac Pro 13'' retina display. The first few hours everything worked fine until I open windows today and the trackpad/mouse and keyboard aren't working. Ive tried resetting windows but it didnt work. help appreciated

    I have downloaded Windows 8 on my Mac Pro 13'' retina display. The first few hours everything worked fine until I open windows today and the trackpad/mouse and keyboard aren't working. Ive tried resetting windows but it didnt work. help appreciated thanks

    It sounds like it is time to restore from the backups you made just before making the disk changes.
    You can re-partition and restore your backups.  If you didn't make backups first (you were warned that it might damage things and to make sure you had a good backup) then you will need to repartition everything and reinstall from scratch...

  • This message has not been fully downloaded from the server

    When opening an email in Microsoft Outlook 2007, a co-worker’s laptop occasionally receives this message: “This message has not been fully downloaded from the server. Would you like to mark it for download?”.  It’s an IMAP account that syncs with his new iPhone 4S. He never received this message when he had a BlackBerry.
    From reading online posts, the problem could be how the iPhone downloads the emails. One suggested resolution was to change when the emails/incoming messages delete from the server; however, my co-worker likes the fact that once he deletes an email from Outlook, it’s deleted from his iPhone and vice versa.
    Does anyone have a solution for this problem? Thanks, iPhone newbie

    I get that message too.  Its not a bug - its a "feature".  I only get it if the e-mail contains a bunch of graphics etc which makes the e-mail much bigger than a "standard" text only one.  I guess its there so you have the choice to download the rest of it or not.  Saves you money if you are charged for data downloads.

  • IPhone 4S has not been backed up from the time I purchased it

    Dear All,
    To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
    Also the Apps I have on my iPhone 4S doesn't appear on my iPad 3.. What could I do to solve these issues? Please help!!
    Thank you..
    JCP

    Jasper C Paul wrote:
    Dear All,
    To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
    Not with they limited information you have provided so far. Are you backing up to iCloud or to iTunes on your computer? Do you have the latest version of iTunes on your computer? Was it installed from a Windows or Mac user ID that had administrator privileges? Does the phone show up in iTunes? What is your operating system? Are you using a USB port directly on your computer (not a hub)? If it's a USB port on the computer and you have a desktop or tower computer is the port on the back, not on the front?

Maybe you are looking for

  • How to transfer a playlist from Mac OS 10.5.8 (pre intel) to Android

    Will Android file transfer 101 work with my O.S?  I have a cyanogen mod One Plus Android phone and would like to download some i-tune files and also bring music and video back to my Mac! Thanks for any help, most appreciated. Oneplus.net

  • Can I get adobe flash player on the touch?

    I want to watch my shows off of CBS on my ipod touch. But it says I need to download Adobe Flash Player to watch them. If I do is it going to hurt my Touch? and if I can do I download the intel based Mac option or the power PC based Mac option? Or is

  • DVD question

    My friend gave me a "vacation" DVD that was created in Australia. When I play it on my mac, it looks great. When I play it on my DVD player, its black and white and corrupted. Is this a PAL vs NTSC issue? My second question is how do I create a quick

  • Nutty glitch in an empty comp

    Hey guys, I'm getting a weird glitch where a piece of artwork is appearing in a completely empty comp of a specific size, and only at quarter rez.  If i up the resoulution to half/full etc it dissappers.  It also dissapears if i drop in some artwork.

  • Where to buy a power adap

    Is there any retail stores that sell the power adapter and extra battery for a zen micro? I dont have a credit card so online stores are not an option.