Hello, I would like to produce 2 different pulse trains on the CTRo and CTR1 output pins.
(DAQ-CARD E6024 PCMCIA)I have the 2 output pins monitored on my scope, when CTR0 puts out a pulse train, CTR1 goes high. When CTR1 puts out a pulse train CTR0 goes high. Also, the pulses are interleaved with each other. Is there a way to make then start at the same time
Attachments:
Stim_Output_pulses_CTR_0,1.vi 94 KB
Hello Zoltan,
I would suggest using the counter gates to synchronize the counters. You will need to externally run a wire from one of the DIO lines you're not using to one of the counters' gates. When the counter gate is high, the pulse train will be generated on each counter. Both counters will need to use the same PFI line as the gate.
There is an example program that ships with LabVIEW 7 called "Gen Dig Pulse Train-Continuous-Pause Trigger" for DAQmx. This demonstrates how to configure the counter to only generate the pulse train when the gate is high.
With this configuration, you could synchronize the counters by writing to the DIO line which is wired to one of the counter gates when you're ready to start the pulse train generation.
Hope t
his helps.
Kristi Hummel
Applications Engineer
National Instruments
Similar Messages
-
hello i would like to know if you have apple shop in birmigham and i want to tell me the cost of iphone 4s because here in your shop i found it 199$ and it is too cheap
We're not Apple here, just your fellow users. And you can look this all up yourself:
http://store.apple.com/uk
http://www.apple.com/uk/retail/
A price of $199 would be in the US and would be subsidized by the cell carrier, requiring a two-year contract with them.
Regards. -
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
Hello, I would like to unlock your Iphone, but there is the Problem, it is bound to the operator AT & T and I have no contract. How do I unlock it from etogo operator?
You contact AT&T and find out if it, and you, are eligible for an unlock. ONLY AT&T can authorize unlocking it.
-
hello I would like to know how to stop my service by mistake and canceled an amount not want to pay or the product
Hi Jimmy,
You may be able to cancel your membership following the processes outlined here: https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Else, you will need to contact our support for assistance with the process: Contact Customer Care
Be sure to sign into the Adobe ID associated with your membership
Hope that helps,
- Dave -
Please see above. I have both an ipad and and iphoen. For the purposes of facetime, I would like to associate only my email address with the ipad and only the phone number iwht the iphobne. However, I cannot remove the email address from the iphone. So, when I get a facetime via email, it rings on both the iphone and ipad. Settings>>facetime will not let me remove the email.
I wouldn't want to say exactly, however I would imagine that it has to do with the fact you use the same Apple ID on both devices. Since Facetime was activated on the phone, with the number, and then activated on the iPad with the email and same Apple ID, they are somehow linked. I'm not sure that you can separate it without having a different Apple ID on the two devices. Otherwise you can look at this support document http://support.apple.com/kb/TS3367 and see if that helps you any.
-
Hello ,I would like to send multitable photos by Email . at the moment i seem to only be able to send them one at a time thank you marie
I do not see an issue here ....just add a submit by email button at the end of each section and enter the email address that you want in each.
-
Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones I report to game loft 6 time and thy ignore me I'm here to Complaint that to iTunes I wish you help me for this complaint cause this game loft always ignore people only take moony and no replay . Ty
You are not addresing Apple here. Were are all just users like yourself. Contact Apple/iTunes by:
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase -
I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN -
I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?
Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.
-
Hello, I would like to know how to transfer one of my two "membership" to an other computer because I just bought a new Mac.... ? Or how to cancel it on my old laptop so I can activate it on my new computer. Thanks a lot !
Hi Virginie,
You need to go under the help menu option and sign out from Muse and then install it on the other computer that you want using the creative cloud desktop app.
- Abhishek Maurya -
Hello, I would like to know how to add or delete single cell in numbers.
Hello, I would like to know how to add or delete single cell in numbers.
If by delete you really mean clear the contents of a cell, then just click once on the cell and hit the 'delete' button.
Before:
After hitting delete button:
In some circumstances you can actually delete one cell.
For example here, I make this choice:
Resulting in this:
So it's not strictly true that Numbers does not delete one cell, ever. It can if you have a one-column table.
So never say never or not ever! Enough pedantry for today!
SG -
Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.
markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR -
Hello I would like to record my exit from all related Alkmbiotaat it because he reached the minimum 5
<Email Edited by Host>Most of the people on these forums, including myself, are fellow users - you are not talking to iTunes Support here. I've asked the hosts to remove your email address from your post.
You shoudl be able to individually deauthorise your computers directly on them via the Store > Deauthorise This Computer menu option, or as you have multiple computers authorised then you can log into your account on your computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.
If you've already deauthorised all within the past 12 months then you can try contacting iTunes Support and ask if they can do it for you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Hello I would like to unlock my iphone 4s because it has not unlocked and I use it on other networks if there is such a possibility I greet
You need to contact the network provider to which the phone is locked. No-one else can do it for you.
Maybe you are looking for
-
How do i transfer my itunes music from one computer to itunes on another
Tell me how to in easy steps with an ipod Tell me how to in easy steps with a pen drive
-
Creating a Global Temporary Table on non-default TEMP tablespace.
Hello , I am using Oracle 11g. I have a procedure which create global temporary tables for its functionality. As the data which is going in the global temporary table , mean the data which is going in the default TEMP tablesapce is too huge ..... bil
-
How to create growl message in JavaFX
I want to create Growl message in JavaFX similar to to this: http://translate.google.com/translate?sl=auto&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fd.hatena.ne.jp%2Fbluepapa- Can you tell me how I can do this or some basic instructions what I
-
Pagination +Business Objects Web Services SDK
hello there please help me, i use pagination with Business Objects Web Services SDK but i can't limit number of records to aspecific number like NameValuePair[] objNameValuePair = new NameValuePair[2]; objNameValuePair[0] = NameValuePair.Fac
-
I would like to insert column headers into a Write labview measurment file
I am looking for a simple way to add column headers to my saved data. I am working with dynamic data VIs and would like not to have to build several arrays to do this.