Hello, Just bought a new camera and tried to load the CF card containing Raw files on both the Mac and the windows computer and get error message telling me nothing was imported. The files or folders selected to import did not containany supported file t
Hello, Just bought a new camera, Tried to import files to elements 12 on the Mac and Elements 10 on Windows... Both computers I get error message:Nothing was imported. Files or folders selected did not contain any supported files... They are Raw (new) files.. It is the only files I had ever imported and it has always imported them in the past.. What could have changed?
Hi Daytrip589,
Just wondering if you're situation has been resolved. I have a similar problem with PSE 11, getting the message about nothing was imported. I shoot RAW, have imported with this camera before ( a Canon G15) but couldn't the last time I tried. Cheers, Glenn.
Similar Messages
-
Just bought a new camera a canon vixia Hfm31 HD
Just bought a new camera a canon vixia Hfm31 HD . I am having trouble. There is no audio in the audio track and video look slow motion replay.
This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
And even more hardware discussion http://forums.adobe.com/community/premiere/hardware_forum
Including this post about 3 possible builds http://forums.adobe.com/thread/598040?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1 -
Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.
Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated. -
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
Everytime i try and download any apps i get an error message telling me that part of the file seems to be corrupted. How do i resolve this issue
Could be.
This may be hard to believe, but I think my problem was that the built-in WiFi adapter on my HP desktop had
gotten flaky. I switched to a Buffalo USB WiFi and the problem immediately disappeared. I never saw any errors, etc. from the Ralink adapter. Strange. Might try another type of connection to the Internet. -
Just recently getting error message when downloading podcasts. Says "The iTunes Library file cannot be save. You do not have enough access privileges for this operation." Doesn't happen every time. Using Windows 7. What can I do? The files seem to be there but I don't know if they are being backed up to cloud.
Hi, DickmoAZ.
Thank you for visiting Apple Support Communities.
This sounds like a permission issue most likely with the iTunes Media folder. Here is an article that will help you troubleshoot this issue.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Cheers,
Jason H. -
My billing address is correct, but the i keep getting that my security code is incorrect and can't download apps. I have re-entered all of my information in my account, but still get error message. How to over-ride?
If you have American Express, your 4-digit security code is on the front. If you have VISA or MasterCard, your 3-digit security code is outside the signature block on the back of your credit card. It happens to me also.
-
Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?
Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?
-
Trying to put movies back on my iPod touch 2, I had to reset it, now I keep getting error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another USB port and cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"
You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC. -
When I try to install the latest version of iTunes, during the installation I get error messages saying that a program is trying to change registry and the installation is stopped.
After this happens the only way that I can open iTunes is to do a 'system restore' to an earlier time.
Has anyone else experienced this and can you help?Could you please post the exact text of the error message or provide a screenshot?
There is advice on issues with the update at Troubleshooting issues with iTunes for Windows updates. One of the entries in the further information section refers to a possible registry permissions problem which might be what you are seeing.
tt2 -
How to open pdf files on computer while getting error message?
I can not open pdfs on my computer that I was priorly able to open. This includes files I have scanned in, email attachments, and files I have converted to pdfs. I keep getting an error message in Adobe saying that it is not a supported file type or the the file has been damaged. Please help!
What is your operating system? Reader version?
Can you open such a PDF in a text editor, then copy and paste the first few lines here in the forum? -
I can receive e-mails from several accounts on my iPhone, but everything I try to send comes back with a message telling me it was "rejected by the server" and just sits in my outbox.
Any suggestions?Remove the Mail account. Go to Mail preferences>Accounts>and go the account and delete it. When it's done, go back and add it back.
-
I upgraded my Mac a few weeks ago to 10.10.2 Yosemite, and I joined the Adobe cloud so I could get access to all the new apps. I read a blurb somewhere about converting older InDesign files to the new CC version I'd have to open the old files in my old InDesign CS3, export to an ins file, then open that file in the new InDesign CC, then export it again to an idml file, then open that file and you shouldn't have any of the usual conversion problems. For the first few files I had to convert, it worked just fine. Now for some reason, whenever I try to open one of these converted files just by double-clicking on the file itself, I get an error message that says, "The document ____ uses one or more plug-ins which are currently not available on your system. Do you want to open anyway?" When I click OK, then I get another error message that says, "Cannot open ____. Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign." I thought this CC version of InDesign was the newest. Can somebody please tell me what gives with this? Any help will be very much appreciated.
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC. -
Just purchased a new Airport Express 802.11N instal with new hi speed Xfinity moden in same location. Cant get a green light on the 2 remote client airports located in other spaces in home. Help?
What is the exact model of the Xfinity modem that you have? Is the new AirPort Express connected directly to this modem by Ethernet?
By "remote client airports" do you mean additional AirPort base stations or Apple computers?
Maybe you are looking for
-
11.1.2.2.000 Patch Set Update (PSU): 11.1.2.2.501 patch has been released
-
I have two missed calls on my iPhone, each time I try to pick them up, my phone returns to the home screen, it will not let me see my recent calls. I have restored my phone, switched it off, taken the sim card out etc but still have the same problem.
-
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
-
how to get 3 or 4 parameters in single line?
-
Library Filter ('Metadata') defaults-change
In the 6+ years I have been using LR each and every day I have never once utilized any of the four default terms cooked-into the 'Metadata' Library Filter ('Date', 'Camera', 'Lens', 'Label'). Is there a way for me to set up new metadata search terms