Hello to all, I need that they help me to be able to encourage a vector (an arrow) that aparesca in a constant way in adobe Edge Animated, I am new and I like the program and I cannot do this type of animation

help me

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Similar Messages

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • This phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    this phone cannot be used because the required software is not installed. i have installed and re installed the program and every time i plug my iphone 6 in the same message pops up

    Have managed to cure it based upon the following information received -
    I keep having this problem with iTunes when I try to connect my iPod Touch to iTunes. I keep getting this error message: "This iPod cannot be used because the required software is not installed".
    What I did:
    Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
    I have already done this required step about a hundred times and I am still getting this same error so if you have any idea of what I can do please help.
    Solution
    I was running the 64-bit version if iTunes, and I did uninstall and re-install just to make sure -- no luck. Turns out there's a really easy solution, I'll spare you the detail of how I figured it out, but if you encounter the same issue, here's the solution:
    1) Using WinRAR (or any other decent archiving program), extract iTunesWindows64Setup.exe
    2) Right click on AppleMobileDeviceSupport64.msi and choose Properties.
    3) Switch to the Compatibility tab and check the "Run this program in compatibility mode for:" box, and select your only option, "Previous versions of Windows", in the drop-down box.
    4) Click OK
    5) Double click the AppleMobileDeviceSupport64.msi
    6) Tell it to Repair your current installation
    7) Done!

  • I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.

    I just recently installed mountain lion and an update for SMC firmware to install power nap. Everything is working except for the menu bar, the icons native to the system do not respond, and features like the clock and battery meter freeze.
    When I mouse over the icons, the rainbow appears as if it was processing something. The problem is eliminated when I restart my computer but it comes back after a while.
    I guess I cant make a backup copy and restore the whole disk because the copy would be made with this error.
    Can anyone help me? Anyone with the same issue?

    Update: I was able to test out the HDMI adapter as well and the same issue occured.  I'm stumped.  10.8.1 maybe.

  • Hello, I want to download a new version of Itunes on my windows PC to to communicate with my Ipad, but the program says: I cannot terminate this download. Since I have also removed the old version of Itunes, now I can't do nothing to communicate with Ipad

    Hello, I want to download a new version of Itunes on my windows-7-PC to to communicate with my Ipad, but the program says: I must terminate this download. Since I have also removed the old version of Itunes, now I can't do nothing to communicate with my Ipad

    figured it out myself; saw the solution with similar problems...Thanks

  • When i select a pdf file for download in a webpage instead of automatically downloading the file and opening it using adobe acrobat I get a new blank window in the browser and it says done in the bottom left corner

    when I select a pdf file within a webpage and click to download instead of getting the "download" window and the file automatically opening after download using adobe reader I get a blank webpage (in the same tab) and in the bottom left corner it says"done". No file is downloaded and if I click "back" I just return to the webpage containing the link.

    Aha!  The properties for the plugin file nppdf32.dll for Adobe Reader indicate the file is for Adobe Acrobat.  This misidentification is then used by SeaMonkey as a label in the helper application list. 
    Adobe Reader 11.0.3.37:  nppdf32.dll has version 11.0.3.37.  This is the version in SeaMonkey's plugins folder. 
    Adobe Acrobat 7.0.8.218:  nppdf32.dll has version 7.0.9.50. 
    As for having both Adobe Reader and Adobe Acrobat on the same PC, this generally works providing Reader is installed AFTER Acrobat.  Reader is freeware, and I want to keep it current.  Acrobat is purchaseware, and I cannot afford to keep buying  upgrades or newer versions. 

  • HT4714 I downloaded a trial copy o final cut pro x. Download was fine and I opened the program and go the editing screen-it looked fine. I tried to open this morning and got error code 600, what happened?

    I opened final cut pro x after the trial download and all was okay. I tried this morning and got the 600 error code message.

    Has the 30 day trial expired?
    http://support.apple.com/kb/HT2237?viewlocale=en_US&locale=en_US
    Andy

  • What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

    what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!!  Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

    You should get your keyboard checked as it's repeating  on a lot of keys and makes you look silly.
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • TS1424 I'm getting a message that indicates "Itunes has stopped working.  A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available.  But I never get a response.  Can somebody help?

    When opening Itunes, after placing my ID and password, I'm getting a message that indicates "Itunes has stopped working.  A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available.  But I never get a response.  Can somebody help?

    Same exact thing with me.  And no help from apple.  Just dropped nearly $600 and cannot get a decent working setup.
    Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
    The crash happens only on iTunes store access.

  • I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

    JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process.  You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

  • Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

    hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

    Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

    Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

  • Hello... How can I un-activate Lightroom 5?  It also shows up on my Adobe Account and I'd like to have it removed from there.  I am not going to be using the program and I want to give it to someone fully intact.  Thanks... David

    How can I un-activate Lightroom 5?  It also shows up on my Adobe Account and I'd like to have it removed from there.  I am not going to be using the program and I want to give it to someone fully intact.  Thanks... David

    Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
    Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
    After this, do an update from the App Store.
    Thats all there is to it.
    For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
    Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
    There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

  • I have iTunes 11.4 and Windows 7. Using iTunes on Windows 7, I get message that iTunes has stopped working and Windows will close the program and notify me if a solution is available. Same message for last two days. Anyone else getting this?

    I have iPad 2, iPhone 5s, both with iOS 7.1.2. I use PC with Windows 7 and hard wire internet service and iTunes to update apple products; no wi-fi. I updated iTunes to v11.4 on 09/11/14. I ran Windows update on 09/10/14. I did not try to open iTunes on my PC until yesterday 09/16/14. I got the message: "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."  I got the same message today.  Does anyone know if this is a Windows problem and if a solution is coming or an iTunes problem?  I can get iTunes on iPad and iPhone.  All other programs PC are working correctly.  I use Norton Internet Service on PC.  I ran virus scans and repair/reinstall iTunes yesterday on PC.

    Hello notime4,
    The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

    I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes.  I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

    Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

Maybe you are looking for