Hellooo

Hello Pals,
I am an certified SD consultant and now here in my company I am given the work in EP. The company is on its way to get EP-BP certification. To be frank am not into java or coding, clearly saying am a big Zero in JAVA.
I know EP is mainly of developing applications i.e. iViews. In this I think WebDynpro is the best and booming thing and I got that these can be done by Business Application Developers.
What must be the basic knowledges a Business Application Developer should have?
Hope you can help me.
regards
AK

Hi Anil,
In enterprise portal development Consultant (EP) you need to Learn,
Visual Composer
Webdynpro (java/ABAP)
Webdynpro Integration in EP
*Portal Fundamentals
*NWDS
The BASIC java is enough to do Webdynpro Java
Basic ABAP is enough to do Webdynpro ABAP
Visual Composer Requires No coding.
In NWDS you will be creating Portal J2EE Projects etc..which requires (JSP,EJBs..etc)
So learn Java.
Go through these Links,
EP LINKS FOR BEGINNER:
Beginning EP Development
Oliver's favorite SDN link collection
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/387daf90-0201-0010-bb98-cb1a5545bf69
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/4b0c105e-0501-0010-bcb0-92478a4b2a17
Overview of the Content Development Process
Overview of the Content Development Process
Java development methodologies (Part I)
Java development methodologies (Part I)
Java development methodologies (Part II)
Java development methodologies (Part II)
Setting up the NetWeaver development environment (Part II)
Setting up the NetWeaver development environment (Part II)
Installing and configuring the preview edition of EP
Installing and configuring the preview edition of EP
Top Weblogs of All Time [19 to 14]
Top Weblogs of All Time [19 to 14]
Enterprise Portal Implementation Forum
Enterprise Portal Implementation Forum
Beginning EP Development
http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/40e93bac3c5a6de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/50/da644160087d47e10000000a1550b0/frameset.htm
Regards,
Ramganesan K

Similar Messages

Hellooo Frndz....:) i have to use UISplitviewController.and I want to do add UISplitViewController To UINavigationController but problem is that i can't do this...:( :( :( i use MGSplitViewController Bt I Dont know Perfectly Use Of MGSplitViewController

Hellooo Frndz....:)
i have to use UISplitviewController.and I want to do add UISplitViewController To UINavigationController but problem is that i can't do this...:(
i use MGSplitViewController Bt I Dont know Perfectly Use Of MGSplitViewController...
so pLz anyone can help me how to add UISpliViewController To UINavigationController ???
===> Thnxs...:)

thanks..K T
you can give me any idea for how to Create My Own Interface for Add UISplitViewController to UINavigationController ...Becouse I was used MGSplitView Controller For Add SplitView to NavigationController
bt i dnt Know how to use MGSplitViewController...when I Added MGSplitViewController To My Application The I can't Use property Of MGSplitViewController ...so,
PLZ Help Me this is very Important For me...
Thnks..:

WHY FCS WILL NOT WORK WITH CANON XH A1, NOW, EVER, ANYTIME? HELLOOO APPLE?

Well well. Trillions of dollars in Apple technology and canon ingenuity and yet these two behemoths of electronics and computer commercialism cannot create a simple easy to sue interface for a freaking Canon XH A1 camera. I have read forums, googled "compatibility issues", talked to friends, emailed people, and yet no one has stepped up with any assistance in this matter. What really hacks me off is that after spending thousands of dollars on Apple products, and numerous combinations of Final Cut Express, Pro, Studio, I have spent the better part of two weeks doing fresh installs, plugging fire wire cables in each and every port, trying numerous Canon cameras, and still, here at 633 am after all of this, my wonderfully complex Final Cut Studio now tells me that although it "knows" a camera is connected via fire wire, it does not recognize and will not initialize my camera. Furthermore, earlier this week when it DID recognize my camera, the video imported was forced to create clips which stopped a meaningless in and out points. In addition, the audio drifted from one second, to 1.5 seconds, and so on and so forth. Ladies,gentlemen, scribes, aficionados, and causal observers here this: I am officially fed up with having to work harder at getting my project ready to edit, than I ever did actually editing the project. This is sad, sick, silly and stupid. I don't know what's next blokes. Vegas Pro? Avid? I am just worn out by the numerous fixes, upgrades, work around, plug ins filters and tech experts who still can't tell me why Final Cut Studio will not simply let me import my freaking video. I'm done with this silliness. Goodbye Apple! Goodbye Final Cut! I have better things to do with my life than researching subjects that have more contradictions than a rubics cube. i am going to get some sleep, spend time with my wife, and get some fresh air. I hope my apple implodes, and I'll use the FCP disks for coasters when I am sipping my cold brew. ARGGGGGGHHHHHHHHH!

i jsut came across your posting. I have never replied to a posting before but i am in your case. I use the saem camera you do and had the same problems you are facing with your setup. I spent days and hours trying to figure out my problems. Finaly i read that you could reset the camera. And I did and it worked. Open the view finder on top of the camera and you will see the tiny reset hole. Stick a pin in there for around 15 seconds and that should reset it back to the factory settings. I think you have played with too many settings on the camera and it is jumbled this is waht happend to me. then go into final cut, but do not attatch your camera yet and click on the EASY set up tab and set your importing to match what ever you shot your video at. You cannot 60i video on a 30f setting they have to be the same.
Alex
P.S.
Please look at your manual for reseting your camera, I am just going off memory and it has been two years when I reset mine. Here is some of the video I have shot with my Canon(W/Final Cut) Click onh the HD button if you have a fast connection.
http://www.youtube.com/watch?v=7g-p-Ok5uJw&feature=channel_page

Feature Request! Hellooo Apple!

I was talking shop with a bunch of my video editor friends the other day and we were discussing a way to tap into a fibre-channel switch. Clearly a PCMCIA FC solution just wouldn't work. However if you did an AV or a PRO laptop in the next year with.. say one of those fancy Intel processors, why not put a Fibre Channel port on the side, lose one of the USB or 56k modem ports.. no one uses them any longer.. and allow us power users to tap into our Xsan and Xserve systems at high speed. Consider what it would mean for our workflow. We could each have our own portable editing system. Have the ability to transfer files from our servers for work at home, and in the mornings go into any edit bay just plug our 'portable bay' into the Xsan and get to work. Never have to worry about anyone screwing with the settings.. Far out thinking, but it would be an awesome feature.
Thanks,
Michael

If you submit feedback, Apple will definitely hear your voice
..k

Creative shop/store in Australia? Creative hellooo

It's extremely difficult to find Creative store in Australia. I'd like to buy original accessories for my Creative Zen Vision:M. I visited a few of Creative online stores in Europe/America/Singapore, although none seems to offer shipping outside their region. If you suggest Ebay, Creative's Ebay store doesn't offer shipping overseas, and their method of payment is ridiculous. You need to ring them and tell them your credit card's details. What is that?
Even worse, Australia's official Creative's website does show all the Creative's products WITHOUT allowing their costumers to buy directly from them. Yes, it merely acts as a showroom for Creative. The heck, their "shop" link directs me to local dealer/retailer that doesn't seem to get updated since ages ago. I rang several retailers yesterday, and none sell the item I am looking for, "Creative Zen Vision Leather Case" nor other items except some flagship items such as MP3 Players, Speakers, Sound Card, etc.
I don't understand Creative. Why do you even bother to design the Australian Creative Website? I can visit Creative.com if I just want to browse around your products. I'd like to support you directly and so the other costumers as well but we can't. I am terribly dissappointed.
I am sorry to offend you in anyway, but Apple Australia is superior in terms of their support for Australian costumers, not to mention I can buy heaps of third party products here in my local area.
What do you say about this Creative?
Message Edited by MuhMuh on 06-9-2006 09:07 PM

I know exactly what you mean. Whist I really enjoy the Zen M vision player the accessories, lack of local retailers and tech/customer service are pretty absent in Australia. It took me 3 weeks to get assistance with my software since it did not seem to download using the instructions in my starter pack. Finally after contacting the australian tech support who incidentally were rude, offhand and mostly misinformati've. They gave me the wrong sites to sort out the software for downloading podcasts. It is zencast.com by way. I also want to obtain a proper set of speakers with a charger like you can for iPods. No such luck. Retail assistants look at me I am from outer space when I ask for creative accessories even when they sell them!! The online store in Australia should at least allow us to buy online.
Alternati'vely after much looking discovered the sole repairer and I think shop for Creative.
It is located at 254 Parramatta Rd, Petersham, shop 3-5, Again Creative make no effort to satisfy their aussie post -sales expectations. The shop is only open 8.30am - 5.30am so too bad if you work all week.
Maybe if you go there you can ask when is Creative opening shops and what an earth are there marketing and product team thinking.
If this goes on much longer (lack of support, lack of accessories) I know which brand I will buy next time round and whilst I think the player is great it won't be Creative unless all the above plus the awful playlist and file management system is fixed and that ominous playback error that I get even with audio files. I mean come on guys you have a potentially superior product. Your lack of addressing these issues is just sabotaging your own efforts to take market share from Apple. Or do you want to always be the alternati've Creative product instead of the preferred MP3>>
As muh-muh says hello,there are Australians buying Creative products and quite a few from looking around and from friends of mine.
Dedicated but disappointed (in Creative) Zen Vision M owner
near sydney, Australia

Hellooo !... i have this question ... can someone help me ....

i have NX7800GTX-VT2D256E
with my ViVO i have SVIDEO in and COMPOSITE in ....this is great ...... but how i can use it to watch my PlayStation 2 in my PC monitor and he is IBM '21 model P260
:idea:what software i must use to see imported PS2 signal in my PC ..... do i need to use special MSi drivers? .....
thank you for help in advance ... ;o)
and cheers

Quote from: iceCube on 23-June-06, 20:40:27
do i need to use special MSi drivers? .....
No and I would use the latest nVidia ForceWare Drivers
Take Care,
Richard
P.S. Since I do not have a PC2, I do not know what connectors the PC2 has for outgoing Video. So I cannot advise which connection to use.

I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

IPhone 4 - other party can't hear me during calls?

Just the other day I was on the phone with one of my friends, when all of a sudden she said she couldn't hear me anymore. I wasn't too worried, but after I called about 4-5 other people to test this, I became slightly concerned. The next step I took was to take a voice memo- it worked fine, so I don't think the mic is the issue. I updated to iOS 6.1 (I believe?) last night after all of this, and it appeared to work. However, after being on the phone for some time the other person could not hear me. I have tried just about everything.. I tried simple remedies like playing/stopping music and restarting my phone (which worked for 5 minutes in a call), unplugging/plugging in headphones.. neither have worked. I also tried turning my phone off for the night (last night) and in the morning it appeared to work, but alas, it's no longer working. I am at my absolute wits end and I haven't a clue what to do to make this work. I'd really only like to factory reset my phone as a last resort. Are there any things anyone has tried that have worked? Is this a software or a hardware issue? Can I have this repaired by Apple? Any help would be great.

Unfortunately the previous IOS wont be restored just your data. We´ll have to wait for the new IOS 6.1.1 which is currently being tested. Here I really verified the problem has been caused after the upgrade and It´s really a software issue because if when I answer the call I scream the first HELLOOO then the mic sensibility will be changed for the rest of the talk, so the mic or hardware is ok.
Many 4S owners are complaining not just about this specific problem but others related to call drops. We´ve got to wait

Camera is not working after Lumia Cyan update WP8....

Hellooo Sir, I am Kailash Kumar from India (Uttar Pradesh). I have Nokia Lumia 620, I got this from my friend May 2014 and he bought it from Saudi Arbia and now it is out of warrently..
when I got this its front camera was not working But rear(back) works fine with flash, But after some days I Updated it to win8.1 with Preview of Devloper, and after updating my Camera has Stoped working when I click the Camera Button, within a second it comes to Home Screen..... So I Downgrade to Win8.0 OS via Nokia Software Updater and My Camera Start Working again....
Someone Suggest me to wait for official realese of Lumia Cyan with W8.1 OS and I waited for it and In August last My phone shows that a Update is Available and Now Update it again Officialy to Win8.1 with Cyan Update via Wifi, and the Same problem Again Happening My Camera Stopped working again after click the Camera Button, within a second it comes to Home Screen, I tried everything, Soft reset, Hard Reset, Uninstalling Nokia Camera App & Installing Again, Reset Camera Button.... But the problem remain Same, Stil Camera is not working.........
I go for the nearest Customer Care Service, they told me I Updated it via Wifi and they will update it with PC Charges Rupee 450/- But I didn't give my phone to Care.... After a Day I updated it Via PC from NSU 4.2.1 (I think Customer Care will do the Same) But the Problem Remaining Same Camera Stil is not working......
PLEASE HELP ME SOMEONE WITH THIS PROBLEM.. HERE ARE SOME MORE INFO OF MY LUMIA 620:-
1- FIRST IT IS OUT OF COUNTRY (SAUDI ARBIA) AND OUT OF WARRENTY...
2- OS VERSION: - 8.10.12393.890
     FIRMWARE REVISION NO. : 3058.50000.1425.0002
     HARDWARE REVISION NO. : 5.0.2.0
     RADIO SOFTWARE VERSION : 2.0.242037.8
     CHIP SOC VERSION : 82207
I WILL HIGHLY THANKFULL TO YOU.
Moderator's note: The attachments were removed as it contain the phone's IMEI. For security purposes, avoid posting any of your presonal information on public forums like this.

try hard reset and see if it works and let me know if it does. take phone off. press (green call) key, (*) key, (3) key and power button then wait for phone to come on then let go of keys.

Writing java code in JSP

Hi All
I dont know which one of the following is more effective in JSP
writing java code like <% out.println("Hellooo "); %>
OR
writing like <%="hello" %>
I shall be very much thankful to all those who spare their valuable time to clarify my doubt. I hope my question is not a stupid one.
Thanks
Elisha

when both gives the same out put, why there are two for the same out put?Because it is easier to do this:
Hello <%= userName %>
than this:
Hello <% out.println("userName"); %>
Also there is a BIG difference in readability and maintainability of the JSP page. JSP pages are all about having html, and a few "fill in the blank" spots. The less <% scriptlet code %> you put on your JSP page, the better. If you want to run java code, do it in a servlet/bean.
With the advent of JSTL, scriptlet code in JSPs should be a thing of the past.

Hard Drive Failed, New one Installed, Problems of course

Hellooo Everyone This is sort of a last ditch effort to see if I can fix this myself or if I am going to have to shell out 500 dollars to get my laptop back in working order. So I have a HP dv6-6140 laptop. A few weeks ago the hard drive failed and I purchased and installed a new one, ran windows 7 and have it on my laptop. When I try to hook up an ethernet cable to download and install the drivers for the laptop the ethernet cable is not recognized it says no internet connection blah blah blah. Ok so I downloaded the drivers to a flash drive and installed some of them onto my laptop, no changes. So I was thinking of purchasing the recovery discs which im assuming include the drivers for the notebook for 35 dollars which is paltry in comparison to what I would pay if I took it to a computer repair shop, but how do I know that would work? I dont. I am looking for ideas or anything that I may be missing. I am not computer illiterate but I am not an expert. Any advice would be greatly appreciated Thanks!
Kelly

Hi, Kelly:
On your model normally it is very important to install the chipset driver first and reboot before attempting to install the ethernet (wired network) driver.
The chipset drivers install some motherboard driver which I think enables the communication to the ethernet adapter.
The problem is, HP does not include the necessary chipset drivers for your model (which I assume is a HP Pavilion dv6-6140us Entertainment Notebook PC).
So...Download and install the AMD Chipset Drivers and reboot. You want the first driver listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Then see if the ethernet adapter works again or reinstall the ethernet driver after you reboot the PC.
The parts list indicates your model comes with a Broadcom wireless/bluetooth card.
Here are the links to the drivers you need for that...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131427-1&cc=us&dlc=en&lc=en...

How to get the current executing file/itself absolute directory?

hellooo,
          gentlemen/lady, how to get the current executing file/itself absolute directory?
          thanks


          Hello,
          you can get the real path information of the JSP through the servlet context:
          http://java.sun.com/products/servlet/2.2/javadoc/index.html
          javax.servlet
          Interface ServletContext
          Method getRealPath
          Christian Plenagl
          Developer Relations Engineer
          BEA Support
          [email protected] (alex mok) wrote:
          >hellooo,
          >
          >gentlemen/lady, how to get the current executing file/itself absolute
          >directory?
          >
          >thanks

Where/How to get the Virtual KPIs in Crystal Reports?

hellooo!
We are developing SSM7 reports using Crystal.
And we have this example scenario:
1. Two NONKPI variables defined via Cube Builder:
    NONKPI381_ACT/TAR Net Sales         100000
    NONKPI382_ACT/TAR Expenses          80000
2. Virtual KPI
    KPI380_ACT/TAR (Net Income Contribution) = (NONKPI381_ACT/TAR - NONKPI382_ACT/TAR)
No issue in PAS and standard front-end reports as they show the KPI380 = 20000 (and other calculations) perfectly.
However, we need a specific report showing an Objective and it's associated KPIs (e.g. KPI380*) and Initiatives. Apparently, the main FACT table CPMS_EA_DATA does not contain values for KPI380. I browsed all the CPMS tables but to no avail, I have not seen any relationships to at least calculate KPI380. Could somebody please give me some advise?
Cheers and Thanks,
Ron Almonte

Hi there!
If you are trying to read data directly from CPMS tables, then you won't find any measure data there. That data is stored in the Application Server... The CPMS_EA_DATA values there are only used as a datasource for the application server, those values are not used directly for the scorecard calculations.
I would advise you to consider the upgrade to version 7.5. With this version you are able to use either Web Services or ODBO to connect SAP BusinessObjects Strategy Management to other SAP BusinessObjects tools.
This way you will be able to easily access, for example, the details on the 'Context', 'Perspective', 'Objective', 'KPI' and 'Initiative', and to the respective measures 'Trend Status value', 'Status Value', 'Actual', 'Target' and 'Score'. You are also able to access more detailed information on the PAS model for any measure, so that you can build your reports on Web or CrystalI, your Dashboards on Xcelsius, etc, etc...
I have used the ODBO provider (available starting with 7.5 SP2) to create a Universe, and then with QaaWS I was able to make that data available for Crystal, which made it very easy to built a report without any coding
Hope this helps!
Best regards,
Ricardo Vieira
Edited by: Ricardo Vieira on Oct 15, 2009 10:21 AM

PLEASE PLEASE HELP! finding and locating files..

Hellooo!..
First of all, I'd like to start by saying that i am a DJ and music producer using Logic Pro 9.
..I have just spend the last 5 days organising my whole iTunes, adding albums, renaming, adding artwork and pritty much making sure that everything is bob on and perfect!
So last night i was nearly done and had pretty much completed the organising of my itunes; everything looks cool everything is labelled correctly etc..
This morning, being the absolute TOOL that i am! i (without realising at first) deleted every song in the iTunes Media folder, which i didn't realise was the default file directory for all my music. (i still have all my music files around the laptop they are not deleted, what has deleted are just the copys of the songs that itunes automatically makes and places into the 'Media' folder) Dont even ask how and why i did this or what was going through my mind! just one of those moments i suppose! So still i deepened my problem by emptying the Trash bin so everything had gone.
So.. obviously as you would presume, the dreaded ''!'' appears when i try to play a song and says that it could not find the original file and would i like to locate it? ..after emptying the recycle bin i downloaded some software that restores what you have deleted but this was no use as certain files were missing or corrupt etc so that idea was scrapped.
All of the music in my library IS on my macbook located in various folders a lot are in 'downloads' folder and alot are in another folder named 'Albums from old computer'
So all of my music is on my laptop but i really dont want to have to go through 2689 songs individually to locate them.
when i tried locating one, i found the file and this song was allowed to be played etc but it also popped up with 'Would you like iTunes to use the location of 'song name whatever' to find other missing files in your library?' ..amazed that it came up with this i clicked yes,but no files were found still :S even though many of the files are in the same folder as this song ive just located.. so this option seems to make no sense?
Basically im looking for a way for iTunes to either search the whole laptop for where the song is located or anything else that would allow them to be found and played. The reason i need this to happen is because the whole library is amazingly organised now it all still looks perfect but would also sound perfect too if i could play the effing songs!
I dont know if ive explained this clearley enough or what but i would really really appreciate it if someone could get back to me on this! This is 5 days work gone down the drain!
Thanks,x

Hi, FlyBeatz.
In your iTunes music folder, is there still a file called iTunes Library which has the word "Lib" under the iTunes logo? Normally iTunes has an "iTunes folder" which contains the above and "iTunes library Extras.itbd, iTunes Library Genius [all with lib under the itunes logo] and iTunes Library.xml.
iTunes lib contains the metadata, the info that says album, artist, tracks name. the music folder just has track1, 2 etc and the track name. You need the Lib file to make iTunes display the tracks properly. If this is lost or deleted then its the hard slog.
There is also a folder called iTunes music which contains the audio tracks filed under artist, then album[s].
If the iTunes Lib file is intact then you might be able to import all the music files back into the one folder and have iTunes recognise them as before the great delete. Make sure its the same name, and file structure or 'tunes will get confused. It also puts a lot of stuff into the various artists or compilations folders when it shouldn't, so watch that if you get discrepancies.
You'll need to create a separate folder for each artist, then inside that, create a folder for each album [or track] and copy the audio files into the appropriate location. Then open iTunes and see if it recognises the library correctly.
Warning. If this doesn't work - and iTunes is not a great piece of software for this kind of repair- it could make things worse.
Another option. Do you have time machine enabled? If so, simply reset the computer to a time [say 2 days ago] just before you did the delete. If TM is running automatically, it usually backs up every 30-60 minutes automatically.
I'd also suggest running time machine before attempting my first suggestion in case that solution makes things worse, then you simply restore the machine to its current [somewhat scrambled] state.
Third option is to ring apple tech support and ask for an iTunes expert to help you.
Which you may have already done.
If none or these - or someone else's - solutions don't fix the problem then its the long hard slog.
I've had to do it with over 120G and 200G of wavs more than once thanks to iTunes stupid behaviour, so I know where your at.
Good luck with it fellow Logic Pro user.
Scorpii.

ClassFormatError when attempting to load an applet from within a JSP

Greetings everyone.
I have a problem that i seem unable to solve.
I've created a web application. I'm using Java 1.4.2_05 and Tomcat. Right now i'm trying to load an applet from a JSP and i'm getting an error that, try as i might, i can't understand why it happens.
Here is some detailed info:
The applet's code:
package smpb.myapp.controllers;
import java.applet.Applet;
import java.awt.Graphics;
public class GUIApplet extends Applet
 public void init()
 public void stop()
 public void paint(Graphics g)
 g.drawString("Hey hey hey",20,20);
 g.drawString("Hellooo World",20,40);
The JSP's code:
<%@ page language="java"
 import="java.util.*"
 session="true" %>
<%
 String name = (String) request.getSession().getAttribute("userName");
%>
<html>
 <head>
 <title>Login</title>
 </head>
 <body>
 <h1>Application</h1>
 
 Welcome <%= name %>! Thank you for logging in!
 
 <applet align="middle" code="smpb.myapp.controllers.GUIApplet.class" codebase="./" archive="MyApp_applets.jar">
 Your browser does not support this feature.
 </applet>
 
 <a href='<%=request.getContextPath() + "/LogOut"%>'>Log Out</a> 
 </body>
</html>-------------------------------------------
When i reach this JSP the applet fails to load and i get the following error message at the java console:
Loading applet ...
Initializing applet ...
Starting applet ...
Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with no proxy
Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
Last modified time and/or expiration value is not available. Jar file will not be cached.
Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with no proxy
Connecting http://127.0.0.1/MyApp/MyApp_applets.jar with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with no proxy
Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
Last modified time and/or expiration value is not available. Jar file will not be cached.
Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with no proxy
Connecting http://127.0.0.1/MyApp/smpb/myapp/controllers/GUIApplet.class with cookie "JSESSIONID=A8EECE5E39458739C760D8907762C507"
java.lang.ClassFormatError: smpb/myapp/controllers/GUIApplet (Bad magic number)
 at java.lang.ClassLoader.defineClass0(Native Method)
 at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
 at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:157)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
 at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:123)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
 at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:561)
 at sun.applet.AppletPanel.createApplet(AppletPanel.java:617)
 at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1856)
 at sun.applet.AppletPanel.runLoader(AppletPanel.java:546)
 at sun.applet.AppletPanel.run(AppletPanel.java:298)
 at java.lang.Thread.run(Thread.java:534)
Exception: java.lang.ClassFormatError: smpb/myapp/controllers/GUIApplet (Bad magic number)-------------------------------------------
The JSP is in the root directory of the web application's path right along with the jar file. The jar file itself has the following structure:
Archive: HelpDesk_applets.jar
Length Date Time Name
 0 05-17-06 12:17 META-INF/
 106 05-17-06 12:17 META-INF/MANIFEST.MF
 0 05-10-06 17:14 smpb/
 0 05-10-06 17:14 smpb/myapp/
 0 05-12-06 16:50 smpb/myapp/controllers/
 794 05-12-06 17:15 smpb/myapp/controllers/GUIApplet.class
 900 6 filesNow, i've tried loading the very same jar file that i use in the JSP through a static HTML which is virtually identical to the JSP i presented and everything works just fine. I've checked and rechecked to see if all the permissions to access the jar file were accurate, i checked to see if Tomcat had it's MIME settings correctly configured so that there was no chance that the files were being corrupted during the load (as that is a usual cause for the problem, or so i've gathered) but to no avail. I've searched the web, including these forums, and found similar problems but no conclusive solution. I can't seem to figure out, at all, what could possibly be wrong. Does anyone have any ideas? I've tried to be as thorough as i could from the start, so, any help would be deeply appreciated.

Hi mshah101,
This can happen if the applet is compiled using an higher version of java and the browser is pointing to an older version (even if minor version number is higher)

Hellooo

Similar Messages

Maybe you are looking for