Help! about insert into one table from two tables'data?

hi,all friends!
i have a question:
i have two table as like this:
table_one(id,ipaddr,col1,col2) primary key(id,ipaddr)
table_two(id,ipaddr,col1,col3,col4) primary key(id,ipaddr)
about table_one and table_two,it's columns may change execept id and ipaddr,
how can i insert the data of table_one and table_two into table_three,the columns of table_three may change with the columns of table_one and table_two
table_three may dynamic create,but it's primary key is (id,ipaddr)
thanks!
pls help!
any suggestion welcome!

insert into table_3
(id, ipaddr, col1, col2, col3, col4)
select t1.id, t1.ipaddr, t1.col1, t1.col2, t2.col3, t2.col4
from table_1 t1, table_2 t2
where t2.id = t1.id
and t2.ipaddr = t1.ipaddr;

Similar Messages

Combining Data into one Cube from two Data-sources..

Dear Experts,
I am pulling data from two data sources and trying to combine in one Info-Cube. The data are like
Data-Source 01
1. GUID --Common
2.Document No ( User Entry)
3.Dist. Channel
4.Transaction Type
5.Date and Quantity
Data-Source 02
1.GUID -- Common
2.Billing Document ( If User drill down according to Document No , Billing Document should come in the report )
3.Billing date
4.Net Value
Out of the datas , The GUID is common between the 2 data-sources. I was thinking that, tha data will take according to its place and If i select the Document No in Report, it will atomatically fetch all the data like Tran type, dist ch, Billing Document No , Billing date.. .
The problem is , in the report Tha data is not coming as I was thinking.
And Another problem is , In future I need to create a Multiprovider between the above mentioned Info-cube and One ODS. And DOCUMENT NO is common in Cube and ODS.
Please Suggest,
How can I proceed for the following requirement.
Thanks,
Sanjana

Hi Sanjana,
In your case cube will create a problem because it will have multiple records . For example :
Data-Source 01 :
1. GUID -- 101
2.Document No - 999
3.Dist. Channel - DL
4.Transaction Type - GPRO
5.Date and Quantity - 20.02.2011 & 20
Data-Source 02
1.GUID -- 101
2.Billing Document - 6000
3.Billing date - 03.03.2011
4.Net Value - 500
Your cube will have 2 records . And your requirement is to show above two records in 1 record in the report .
Why dont you make an ODS in between , where you can put GUID as the Key field and rest all the fields as data fields. Create 2 transformations to this DSO from the 2 datasources . And let it get updated one by one . Your DSO will have 1 record only . Now either you do reporting on this DSO or take the data to the cube .
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 19, 2011 1:34 PM

Fetch data from two tables and insert into one table

I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director.
Data exists only for subset of plants and a Plant may have one or both roles.
DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
The above data needs to be inserted into one table (@PlantNew) as follows:
PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
How do I achieve the above using SQL ? Thanks.

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

Select from two tables and insert into a third

I'm trying to do a select from two tables and do an insert into a third table from the two resulting columns.
I have the following....
DECLARE
tempsid number;
temphostid number;
BEGIN
select "DBSID_ID","ID" into tempsid,temphostid from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" ("SIDLOOKUP_ID", "SERVERLOOKUP_ID")
values(tempsid, temphostsid);
END;
run;
I get the error ....
ORA-06550: line 11, column 18:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
1. DECLARE
2. tempsid number;
3. temphostid number;

okay ... I tried a different way ...
DECLARE
a number;
b number;
BEGIN
select "DBSID_ID","ID" into a,b from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" (SIDLOOKUP_ID, SERVERLOOKUP_ID) values (a, b);
END;
and now it whines about ...
ORA-01422: exact fetch returns more than requested number of rows

Retrive data from two tables into one internal table.

Hi SDN,
I am downloading the Assets data from two tables ANLA,ANLZ.
there is a common field ANL1in both tables and i have to retrive the data by using anl1 into the internal table.
can you please send me the SELECT Syntax for this probl.....
Thank you & Regards,
Manoj

Hi manoj,
Please see the following sample code. But kindly don't use join as it may hamper ur performance. No trouble in using two select query.
data: begin of itab occurs 0,
        BUKRS like anla-BUKRS,
        ANLN1 like anla-ANLN1,
       BDATU like anlz-BDATU,
        end of itab.
select anlabukrs anlaANLN1 anlzBDATU into corresponding fields of table itab from anla inner join anlz on anlaanl1 eq anlz~anl1 where (logexp).
Please come back for any clarification.
Thanks and Regards,
saurabh

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.

Possible solution to avoid deadlock when two inserts happen on same table from two different machines.
Below are the details from deadlock trace.
Deadlock encountered .... Printing deadlock information
Wait-for graph
NULL
Node:1
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x00000013F494A980 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:376 ECID:0 XactLockInfo: 0x000000055014F400
SPID: 376 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
NULL
Node:2
KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
Grant List 2:
Owner:0x0000000B3486A780 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:238 ECID:0 XactLockInfo: 0x0000002AA53383F0
SPID: 238 ECID: 0 Statement Type: INSERT Line #: 70
Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
Requested by:
ResType:LockOwner Stype:'OR'Xdes:0x000000055014F3C0 Mode: RangeI-N SPID:376 BatchID:0 ECID:0 TaskProxy:(0x000000080426E538) Value:0x30614e80 Cost:(0/41748)
NULL
Victim Resource Owner:
ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
deadlock-list
deadlock victim=process5daddc8
process-list
process id=process5daddc8 taskpriority=0 logused=38828 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994026815 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.347 XDES=0x2aa53383b0 lockMode=RangeI-N schedulerid=43 kpid=14156 status=suspended spid=238 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.463 lastbatchcompleted=2014-07-25T12:46:57.463 clientapp=pa hostname=pa02 hostpid=1596 loginname=myuser isolationlevel=serializable (4) xactid=2994026815 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=mydb.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1] .....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
process id=process5d84988 taskpriority=0 logused=41748 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994024748 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.320 XDES=0x55014f3c0 lockMode=RangeI-N schedulerid=39 kpid=14292 status=suspended spid=376 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.440 lastbatchcompleted=2014-07-25T12:46:57.440 clientapp=pa hostname=pa01 hostpid=1548 loginname=myuser isolationlevel=serializable (4) xactid=2994024748 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
executionStack
frame procname=pa.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
INSERT INTO [dbo].[Prod1]....
inputbuf
Proc [Database Id = 8 Object Id = 89923542]
resource-list
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5d84988 mode=RangeS-S
waiter-list
waiter id=process5daddc8 mode=RangeI-N requestType=convert
keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
owner-list
owner id=process5daddc8 mode=RangeS-S
waiter-list
waiter id=process5d84988 mode=RangeI-N requestType=convert

Don't know. Perhaps these can help. I scanned the second link but didn't see much about Ending Deadlocks. I'd say the Fourth link probably has better information than the first three links. But maybe read them all just in case the Fourth is missing something
one of the first three have.
Deadlocking
Detecting and Ending Deadlocks
Minimizing Deadlocks
Handling Deadlocks in SQL Server
Google search for "SQL Deadlock"
La vida loca

Capture from Two Tables and Apply in one Table

Hi All,
Is it possible to capture from two tables (master and child table) and apply in one table?
For example,
1. DEPT and EMP tables in source database with relation
DEPT table structure is like DEPT_ID, DEPT_NAME, LOC_NAME
EMP table structure is like EMP_ID, EMP_NAME, EMP_DOJ, EMP_SAL, DEPT_ID
2. EMP_DEPT_STAGING in destination database
EMP_DEPT_STAGING table structure is like EMP_ID, EMP_NAME, EMP_DOJ, EMP_SAL, DEPT_ID. DEPT_NAME, LOC_NAME
if there is any update in DEPT table, EMP_DEPT_STAGING should get populated with Department and its employee details. Similarly, if there is any update in EMP table EMP_DEPT_STAGING table should get populated with Employee details and along with department detail.
Is it possible to accomplish this? If yes, could you please provide me some examples?
Thanks & Regards
Thiyagu
Edited by: mt**** on Sep 4, 2011 11:22 PM

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

To Select the data from two table one is transp table and onther is cluster

Hi All,
I want to select the data from two tables
Here i am giving with an example.
Fileds: kunnr belnr from bseg. table bseg
fields: adrnr from kna1     table: kna1.
Know i want to put these into one internal table based on kunnr and belnr.
Thanks in advance.
Ramesh

Hi,
   U cant use joins on cluster table and BSEG is a cluster table so use FOR ALL ENTRIES for taht
refer this code
*&      Form sub_read_bsak
      text
--> p1        text
<-- p2        text
FORM sub_read_bsak.
*--Select data from BSAK Table
SELECT lifnr
         augdt
         augbl
         gjahr
         belnr
         xblnr
         blart
         dmbtr
         mwskz
         mwsts
         sgtxt
         FROM bsak
         INTO CORRESPONDING FIELDS OF TABLE it_bsak
         WHERE belnr IN s_belnr
         AND   augdt IN s_augdt.
IF sy-subrc EQ 0.
*--Sort table by accounting document and vendor number
    SORT it_bsak BY belnr lifnr.
ENDIF.
ENDFORM.                    " sub_read_bsak
*&      Form sub_read_bseg
      text
--> p1        text
<-- p2        text
FORM sub_read_bseg.
IF NOT it_bsak[] IS INITIAL.
*--Select data from BSEG table
    SELECT belnr
           gjahr
           shkzg
           kostl
           hkont
           ebeln
           ebelp
           FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_bseg
           FOR ALL ENTRIES IN it_bsak
           WHERE belnr EQ it_bsak-belnr
           AND   gjahr EQ it_bsak-gjahr
           AND   shkzg EQ 'S'.
    IF sy-subrc EQ 0.
*--Sort table by accounting document
      SORT it_bseg BY belnr.
    ENDIF.
ENDIF.
ENDFORM.                    " sub_read_bseg

Insertion into local table from remote table with contains clause

Hi all,
We are tasked to insert some rows into our database from another database. We tried to use DBLinks to link the 2 databases and were able to use Select statements to filter out the data that we need to insert into our database.
These statements take the form of: Select * from RemoteTable where contains@RemoteLink(IndexColumn, 'car')>0;
where RemoteLink is the DBLink that we have created.
However Oracle gave us an error (ORA-00949: illegal reference to remote table) when we tried to insert the dataset from the above statement into our local table. We used the following statement in doing so: Insert Into LocalTable (Select * from RemoteTable where contains@RemoteLink(IndexColumn, 'car')>0);
Even if we use Create Table, Oracle gave us the same error when we tried to push the data from the Select Statement into the new table.
Could anyone advise us whether it is possible to insert such data into a local table? And if som what is the proper way of doing it?
Many thanks to any advises.

Hi,
there is document 261741.1 on Metalink. This states explicitly that it is not possible to invoke remote user-defined operators, and contains is such. The solution given in the article is to create a wrapper function on the remote site and this one calling in stead of contains.
Herald ten Dam
htendam.wordpress.com

Insert Multiple rows into the table from that table data

Hi All,
I have a requirement like to insert mulitple rows into the table from that table data only(I need to replicate the data).
In this table primary key is composite primary key with all foreign keys.primary key also including the Date foreign key.I need to change that date at the of insertion.
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
VALUES
(SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510
But it is giving the error like missing Expression.
Could anyone please help to me.
Thanks and Regards
Swetha.

You can have either VALUES or SELECT not both
INSERT
INTO myschema.Fact_page_performance
time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available ,
date_sk
SELECT time_sk ,
batch_id ,
delta_msec ,
delta_user_msec,
error_code_sk ,
content_errs ,
element_count ,
page_bytes ,
Available
FROM myschema.FACT_PAGE_PERFORMANCE_BACKUP
WHERE date_sk=20090509,20090510;

How to bring the more than one rows from the table into the script

Hi
I have to bring more than one rows from the table into the Main windows of the script. so plz help me out.
Thanks in Advance
Ananya

Hi Ananya,
   Bring more than one row into main window of script.
   For this you need to do some changes for data which you pass to main window.At a time you need to pass more than one row,so for this you need to define one structure.See below code.
Types:begin of ty_rows,
     include structure (your row_structure),
     include structure (your row_sturcture),
Types:end of ty_rows.
for example....
If i need to pass 2 vendor details at a time to main window then the structure should be like this.
Types:begin of ty_rows,
       vendor1 like lfa1-lifnr,
       vendor1_name like lfa1-name1,
       vendor2 like lfa1-lifnr,
       vendor2_name like lfa1-name1,
      end of ty_rows.
Data:i_main type standard table of ty_rows,
     wa_main type ty_rows.
Based on condition you can pass more than one rows of your actual internal table data to i_main internal table.
Then you can pass i_main internal table to your main window.
    I think this will help you.
Cheers,
Bujji

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

Selecting from two tables but making it just one selection

Is there a way to select from two tables and just have one selection appear?
Specifically I have a fact_install_unit, and a fact_install_arch table.
Sometimes the value exists in fact_install_unit.factory_timestamp, and sometimes when fact_install_unit.factory_timestamp is null I need to pull it from the fact_install_arch.factory_timestamp.
sort of like:
(select fact_install_unit.factory_timestamp
from fact_install_unit, fact_install_arch
where fact_install_unit.fl_unit_sak = fact_install_arch.fl_unit_sak
and where fact_install_unit.factory_timestamp is null then display fact_install_arch.factory_timestamp)

> I was just stating that I do not have sufficient priveleges to create views in this database.
>
nm means "no more" than that
And how are we supposed to know that? You seem to have changed the thread subject to "unfortunately I only have read-only and insufficient priveleges", which is not even a question.
nm means "New Mexico":
http://www.myshortpencil.com/schooltalk/messages/85/515.html?971794944

Delete from two tables in one statement

Hi,
Is there a way to delete from two tables in one statement?
Actually I have two tables:
1. Base table (id, name, age)
2. Person table (id, city, street)
The id in both tables is identical.
I would like to delete using something like a join:
Delete from base, person where id=2;
Thanks
dyahav

Hi,
If you want to delete records both at a time them your table must use ON DELETE CASCADE. See the below example.
CREATE TABLE supplier
( supplier_id numeric(10) not null,
supplier_name varchar2(50) not null,
contact_name varchar2(50),
CONSTRAINT supplier_pk PRIMARY KEY (supplier_id)
CREATE TABLE products
( product_id numeric(10) not null,
supplier_id numeric(10) not null,
CONSTRAINT fk_supplier
FOREIGN KEY (supplier_id)
REFERENCES supplier(supplier_id)
ON DELETE CASCADE
In this example, we've created a primary key on the supplier table called supplier_pk. It consists of only one field - the supplier_id field. Then we've created a foreign key called fk_supplier on the products table that references the supplier table based on the supplier_id field.
Because of the cascade delete, when a record in the supplier table is deleted, all records in the products table will also be deleted that have the same supplier_id value.
Thank you.

Comparing data from two tables

My PL/SQL is very limited, however, I need to write some code that compares data stored in two different Oracle tables and then writes the differences to a third table. Both tables have primary keys that I will use to ensure I am comparing like for like. These tables could be large.
Any help on the best way to do this, or any code examples would be very appreciated.

One fairly efficient way of doing this is with set operators. The following code is untested - but looks right ;). It also assumes you want to know the provenance of the rows; if not, just zap the literal from each SELECT statement.
INSERT INTO diff_tab SELECT * FROM
( (SELECT 'tab1nottab2' AS provenance, t1.col1, t1.col2 FROM tab1 t1
     MINUS
     SELECT 'tab1nottab2', t2.col_a, t2.col_b FROM tab2 t2)
     UNION ALL
     (SELECT 'tab2nottab1', t2.col_a, t2.col_b FROM tab2 t2
      MINUS
      SELECT 'tab2nottab1', t1.col1, t1.col2 FROM tab1 t1)
/Cheers, APC

Help! about insert into one table from two tables'data?

Similar Messages

Maybe you are looking for