Help! Add Result into JTree or JList.

Hi,
I retrived some values from one of the table from database using ResultSet. And I want to add
the result into the JList or JTree. Any help will be greatly appreciated.
Thanks in advance
Sam.
Here is the code.
void searchButton_actionPerformed(ActionEvent e) {
try{
String query = "SELECT * FROM PINFO WHERE POLICYNUMBER = '" +
searchTextfield.getText().toUpperCase() + "'";
ResultSet rs = Application1.stmt.executeQuery(query);
while(rs.next()){
pid = (rs.getInt("PID"));
System.out.println(pid);
catch(SQLException ex){
System.err.println("SQLException: " + ex.getMessage());
try{
String query = "SELECT * FROM (UNMATCH U LEFT JOIN DOCUMENTTYPE D ON U.DOCUMENTTYPE=D.DOCNUMBER) WHERE PID = '" + pid + "'";
ResultSet rs1 = Application1.stmt.executeQuery(query);
while (rs1.next()){
String documentcode = (rs1.getString("DOCUMENTCODE"));
//************** I want to add these documentcode into the Jlist or jTree.
System.out.println(documentcode);
catch(SQLException s){
System.err.println("SQLException: " + s.getMessage());
}

public class blah
Vector v;
JList j;
public blah()
v = new Vector();
j = new JList(v);
JPanel jP = new JPanel();
jP.add(j);
public getResults()
v.removeAllElements();
j.setListData(v);
String query......
Resultset rs = .....
while(rs.next())
String s = rs.getString("");
v.add(s);
j.setListData(v);

Similar Messages

  • After changing laptops, i am unable to add songs into my iPhone 4. The song appears in the library but not in the device. Help!

    I have not been able to add songs into my iPhone after switching computers. The mp3 format of these current songs are in the old laptop and i am unabe to retrieve them. In the new laptop, i am unable to add songs to my device, only to the iTunes library.

    Best route here is to focus initially solely on the iTunes Library.  Once it has all the Songs that you want, turn off iTunes Match, sign out of iTunes Store and restart the computer from cold.
    Moving to the iPhone would suggest a restore and fresh link to the library post the following steps.
    1.  Sign in to iTunes Store;
    2.  Turn on iTunes Match - allow 3-step process to run to completion;
    3.  Make secure backup of library;
    4.  Force iPhone in to restore mode - hold down 'power on/off' with 'home key' for 10 seconds
    5.  Attach iPhone via USB to computer and follow 'restore' instructions in iTunes
    6.  Once complete synchronise with library as required
    At this stage all required Songs should be on the iPhone - post iPhone back-up a good point to fully enable iTunes Match on the iPhone if required.

  • Problem to store a oracle sql result into a variable

    Hello everyone,
    I'm working on a little project that use c#, Oracle ODT and asp.net, so here is the thing, I need to save the result of a sequence (SECNUM.NEXTVAL ) into a variable, then call that value from many inserts and querys and for last make the commit. My problem is that I don't know how to convert the string result to a number and the call it from the statements. Always brings two errors, one is invalid number because Im sending a string and the another is that if I comment the line cmd.ExecuteNonQuery(); the script runs but no commit happens.
    This is my code, is attached to a button:
    C# Syntax (Toggle Plain Text)
    string oradb = "Data Source=BBDD;User Id=DEMO;Password=DEMO;";
    string cmd1 = "SELECT SECNUM.NEXTVAL FROM DUAL";
    OracleConnection conn = new OracleConnection(oradb);
    conn.Open();
    OracleParameter parm = new OracleParameter();
    parm.OracleDbType = OracleDbType.Decimal;
    OracleCommand cmd = new OracleCommand();
    cmd.Connection = conn;
    cmd.Parameters.Add(parm);
    cmd.CommandText = "INSERT INTO DEMOINCI (CODINCI, CODCLI) VALUES (('" + cmd1 +"'), 'TEST')";
    cmd.CommandText = "INSERT INTO DEMOINCILIN (CODINCI,CODLIN) VALUES (('" + cmd1 +"'),1)";
    cmd.CommandType = CommandType.Text;
    cmd.ExecuteNonQuery();
    So my problem is that the column CODINCI is a column number of (9) and not a VARCHAR and can not be changed because is already have data, so when I use the code of the example, Oracle return an error saying Invalid number (of course).
    With the help of a friend I tried to put with the cast like this cmd.CommandText = "INSERT INTO DEMOINCI (CODINCI, CODCLI) VALUES (" + "CAST(" + cmd1 + "AS NUMBER), 'TEST')"; and it works but only if I comment the line cmd.ExecuteNonQuery();, so the commit never happend and of course there is no insert in the database.
    ¿It is so difficult to store a result of an SQL into a variable and then call it back on a statement?, on Oracle Forms you create a cursor like cursor=CVAL SELECT SECNUM.NEXTVAL VAL FROM DUAL and that it you can then use the VAL result into all other queries of the same form an retrieving with the :VAL option.
    Thanks for all the help.

    I just had to do something similar for my C# class, using SQL Server. The primary key for a "Customers" table was an auto-incrementing integer. After inserting a new customer I had to retrieve and display the primary key:
    string selectStatement = "SELECT IDENT_CURRENT('Customers') from Customers";
    SqlCommand selectCommand = new SqlCommand(selectStatement, connection);
    int customerID = Convert.ToInt32(selectCommand,ExecuteScalar());
    The ExecuteScalar() method of selectCommand returned the first column of the first row of the dataset, which in this case was the key of the new Customers record, as an object. Convert.ToInt32() converted the key to an integer.
    Once you store SECNUM.NEXTVAL as an integer, you can use it to create a Parameter for the Command object.
    HTH.

  • Tempolary add record into cookies before into database

    Hi,
    I'm developing cart system, the user can add more than 1 items (planning to use tabular form), however, the record straight away go into database. The result i wanted is after the user add item into cart, go to next process where user need to type in their personal details, then click on submit, then the record all go to database.
    So i wondering, if i can save the record in the cookies/xml before the user finish the check out.
    I been thinking, is there any other method to accomplish this?
    e.g.
    all the insert/update/delete can rollback if the user not complete the process.
    Please help. or got other way to do this?
    ~vincent.

    APEX Collections would be the recognised approach.
    There is an Online Store packaged application that you might want to look at.

  • How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

    The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
    The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
    pear to be working or at least I am not getting any indication on the inidcator.
    Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
    Attachments:
    regulation_tester_7_loops.vi ‏244 KB

    I didn't really have time to dig in and understand your program in depth,
    but I have a few tips for you that might things a bit easier:
    - You use local variables excessively which really complicates things. Try
    not to use them and it will make your life easier.
    - If you flowchart the design (very similar to a dataflow diagram, keep in
    mind!) you want to gather data, calculate a value from that data, store the
    calculation in an array, and loop while the time is in a certain range. So
    theres really not much need for a sequence as long as you get rid of the
    local variables (sequences also complicate things)
    - You loop again if timepassed+1 is still less than some constant. Rather
    than messing with locals it seems so much easier to use a shiftregister (if
    absolutely necessary) or in this case base it upon the number of iterations
    of the loop. In this case it looks like "time passed" is the same thing as
    the number of loop iterations, but I didn't check closely. There's an i
    terminal in your whileloop to read for the number of iterations.
    - After having simplified your design by eliminating unnecessary sequence
    and local variables, you should be able to draw out the labview diagram.
    Don't try to use the "insert into array" vis since theres no need. Each
    iteration of your loop calculates a number which goes into the next position
    of the array right? Pass your result outside the loop, and enable indexing
    on the terminal so Labview automatically generates the array for you. If
    your calculation is a function of previous data, then use a shift register
    to keep previous values around.
    I wish you luck. Post again if you have any questions. Without a more
    detailed understanding of your task at hand it's kind of hard to post actual
    code suggestions for you.
    -joey
    "nelsons" wrote in message
    news:[email protected]...
    > how do I create a 1d array that takes a single calculation and insert
    > the result into the first row and then the next calculation the next
    > time the loop passes that point and puts the results in thsecond row
    > and so on until the loop is exited.
    >
    > The attached file is work inprogress, with some dummy data sp that I
    > can test it out without having to connect to equipment.
    > The second tab is the one that I am having the problem with. the
    > output array from the replace element appears to be starting at the
    > index position of 1 rather than 0 but that is ok it is still show that
    > the new data is placed in incrementing element locations. However the
    > main array that I am trying to build that is suppose to take each new
    > calculation and place it in the next index(row) does not appear to be
    > working or at least I am not getting any indication on the inidcator.
    >
    > Basically what I am attempting to do is is gather some pulses from
    > adevice for a minute, place the results for a calculation, so that it
    > displays then do the same again the next minute, but put these result
    > in the next row and so on until the specifiied time has expired and
    > the loop exits. I need to have all results displayed and keep building
    > the array(display until, the end of the test)Eventually I will have to
    > include a min max section that displays the min and max values
    > calculated, but that should be easy with the min max function.Actually
    > I thought this should have been easy but, I gues I can not see the
    > forest through the trees. Can any one help to slear this up for me.

  • Copy the result of Execute immediate result into a variable.

    Hi All,
    Is there any way to copy the result of execute immediate result into a variable.
    am doing following steps but am getting an error.
    varSQLstmt1:='select count(*) into'||vararch_ct||' from '||vararch_count;
    dbms_output.put_line(varSQLstmt1);
    execute immediate varSQLstmt1;
    But am getting sql statement as select count(*) into from SALES
    the variable(vararch_ct) is missing in select statement .
    please help me to solve this issue. Or is there any way to insert the count of records into any variable.
    Thanks
    Sree

    declare
    varSQLstmt1    varchar2(4000);
    v_count          number;
    begin
    varSQLstmt1:='select count(*) from '||vararch_count;
    dbms_output.put_line(varSQLstmt1);   
    execute immediate varSQLstmt1 into v_count;
    dbms_output.put_line('Coutn :: ' || v_count);
    end;

  • ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

    Hi,
    We try to install sccm 2012 serondary site in server 2012. It always failed.
    I used the rereqchek tools to check system enviroment locally. All passed.
    The primary site installed in server 2012.  Both server had granted the administrator permission.
    Anyone can help to check the below Configmgrprereq.log
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
    <01-16-2015 08:47:55> ********************************************
    <01-16-2015 08:47:55> Commandline :
    "D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
    <01-16-2015 08:47:55> Check Type: Secondary site
     Site Server: DPServer.ms.com,
     SQL Server: DPServer.ms.com,
     SQL Named Instance: ,
     Install Folder: d:\Program Files\Microsoft Configuration Manager\,
     Setup Source Folder: D:\SCCM2012\Source
    <01-16-2015 08:47:55> INFO: Executing prerequisite functions...
    <01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
    <01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
    the SQL Server and management point computers.
    <01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
    <01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
    <01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
    2008 SP2 or later.
    <01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
    <01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
    <01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
    <01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
    <01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
    <01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
    <01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
    <01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
    <01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
    <01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
    server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
    Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
    <01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
    <01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
    <01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
    <01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
    requirement.  Configuration Manager requires at least Windows Installer version 4.5.
    <01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
    <01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
    <01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
    <01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
    <01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
    <01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
    <01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
    or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
    <01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
    <01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
    site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
    <01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
    <01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
    <01-16-2015 08:49:55> INFO: SQL Server named instance <>
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
    <01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
    <01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
    <01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
    <01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
    <01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
    <01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
    <01-16-2015 08:50:05> INFO: .NET is installed
    <01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
    <01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
    <01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
    <01-16-2015 08:50:10> INFO: .NET is installed
    <01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
    <01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
    <01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
    <01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
    <01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
    <01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
    recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
    <01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
    <01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
    <01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
    <01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
    <01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
    <01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
    <01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
    <01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
    for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
    permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
    <01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
    <01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
    <01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
    <01-16-2015 08:53:44> INFO: LangID <409>
    <01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
    <01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
    <01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
    <01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
    <01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
    <01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
    <01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
    <01-16-2015 08:53:44> INFO: getaddrinfo returned success.
    <01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
    <01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
    <01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
    <01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
    <01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
    <01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
    <01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
    <01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
    Server 2008 SP2 or later.
    <01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
    <01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
    <01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
    requires IIS. Install IIS on the site system to continue setup.
    <01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
    is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
    <01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
    <01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
    not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
    if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
    <01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
    <01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
    <01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
    <01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
    <01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
    <01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
    <01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
    client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
    <01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
    <01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
    <01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
    <01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
    <01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
    Windows Server 2003 or later.
    <01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
    <01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
    <01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
    Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
    <01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
    <01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
    <01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
    <01-16-2015 08:55:57> ***************************************************
    <01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
    <01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
    <01-16-2015 08:56:09> INFO: Setting registry values
    <01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

    <01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
    on the SQL Server and management point computers.
    Actually the administrative permission had been granted.

  • TS3999 I am unable to load iCloud Outlook add-in into Outlook 10 on a Vista PC

    I am unable to load the "iCloud Outlook Add-In" into Outlook 10 on a Vista PC.  I periodicall get a note that the add-in will cause Outlook to crash.  There is however an add-in loaded that is "iTunes Outlook Add-In".  When I first installed iCloud everything updated just fine but as I have add contact and calendar items to either the ios device or the PC nothing has updated.  Can someone help me get my iCloud working?

    Hey rjgravely!
    Here is an article that will help you accomplish this stated goal:
    iCloud: Set up iCloud Mail on your devices
    http://support.apple.com/kb/ph2621
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Why are some of my pictures blank green screens when I try to add them into a montage??

    Why are some of my pictures from my iphone showing up as blank green screen when I try to add them into imovie?

    Look under "More like this" on the right of this page, specifically "Re: no photo selected"; the discussion there may be of help.

  • How to add TickMark into dropdownlist?

    Hello,
    i am looking for dropdownlist with multiple selection.
    Is there a DropDownList widget allows more than one menu item to be selected at a time?
    i got ans from forum
    http://forums.adobe.com/message/3319311#3319311
    they said we can add tickmark into dropdownlist.so that we can select more than one item.But How to add Tickmark into dropdownlist? OR can we custmize dropdownlist?
    please, give some hint.
    If Anybody knows the solution , please help me.

    I think there are two ways:
    1) Use a specific control with text tokenization, like a Telerik's one  RadAutoCompleteBox (user1's text is a token, and user2's text is an editable
    text area);
    2) Use CSR (client-side rendering; JSLink field of a list EditForm's web part) to make the original field (input tag) read only and dynamically add second text
    box for user2's editable text. Then on form submit you can combine the two values: read only one and dynamically edited. You may do so via overriding the PreSaveAction() JavaScript function in your JSLink file.
    v

  • In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

    in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

    Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

  • How to add data into JTable

    How can I add data into JTable, for instance ("Mike", "Gooler", 21).

    How can I add data into JTable, for instance ("Mike",
    "Gooler", 21).You will have very good results if you segregate out the table model as a seperate user class and provide a method to add a row there. In fact, if you use the table to reflect a database table you can add the row inplace using the existing cursor. I believe it's TableExample2 in the jdk\demo\jfc\TableExamples that has a very good example of this.
    Walt

  • Add node into XML Model

    Hi all,
    i would like to add datas into my xml model but i don't manage to do it.
    Here is the context :
    -I have an xml file which represents a tree
    -When the xml model is loaded, i bound it to a tree
    -Then i add nodes to my tree ( aNode.addNode(new Node ) )
    When adding a node, i would like the node to be represented to my model;
    e.g : before adding a node
    <node name="node1">
         <node name="node1_1"/>
         <node name="node1_2"/>
    </node>
    after the node is added :
    <node name="node1">
         <node name="node1_1"/>
         <node name="node1_2"/>
         <node name="new node"/>
    </node>
    I have tried  xml setProperty:
    oModel.setProperty(myPath,data);
    oModel.setProperty(myPath,data,oContext);
    Can somebody help me to achieve this?
    Thanks,
    best regards,
    Marc

    Thanks for this fast reply, i try it and i come back to you
    Edit :
    Here is my xml file :
    <?xml version="1.0" encoding="utf-8"?>
    <objectSet version="1.2.3.4">
        <aRoot code="testCode" reference="0123456789" description="TestDescription"
            owner="Tester">
            <component name="MyCompo1" type="MyCompo1Type">
                <component name="MyCompo2" type="MyCompo2Type">
                    <property name="myProperty2-1" type="string" value="null" />
                    <property name="myProperty2-2" type="string" value="null" />
                    <property name="myProperty2-3" type="string" value="null" />
                </component>
                <component name="MyCompo3" type="MyCompo3Type">
                    <property name="myProperty3-1" type="string" value="null" />
                </component>
            </component>
        </aRoot>
    </objectSet>
    I made a button with the fellowing function attached :
    aTestFunction: function(oEvent){
            console.log("Test");
            var tree = this.byId("myTree");
            var oModel = tree.getModel();
            var pty = oModel.getProperty("/aRoot/MyCompo1"); // Empty; path is not good
            var pty1 = oModel.getProperty("/aRoot/component");//something but only whitespaces when printing
            console.log(pty);//empty
            console.log(pty1);// a lot of whitespaces (9lines of different sizes)
            pty1.push("node");//Error, pty1.push is not a function
            oModel.setProperty("/aRoot/component",pty1);
    The argument of pty1.push is not good, but the function cannot be even called.
    Another try?

  • Why I can't continue add photos into my iPod ???

    I don't know why I can't continue add photos into my iPod. For example, I already had some photos in my iPod and I can see the folder that contains all the photos in my iPod with a mark on it. But one think that I don't know is when I want to add more photos into my iPod, iTune will sync my iPod for a very long moment and there's no processing indication, it's like there was a message 'Syncing iPod' that show in the top of the iTune screen, but there was no 'processing bar' under it. I don't know why this happen. Do I have to erase all the photos that were currently in my iPod and the iPod Photo Cache located in My Photos to re-upload the new photos into my iPod? But in this situation, I couldn't leave the 'old photos'in my iPod. I just want to make a hudge photos library, COULD ANY GENIUS HELP ME ?

    i don't know if this will help but this is how i manage my photos:
    1. create a folder (mine is called 'ipod photos')
    2. put all the photos you want on your ipod in that folder
    3. open itunes, plug in your ipod.
    4. on the overview screen, click the photos tab
    5. check the, 'sync photos from' box.
    6. browse to the folder you want to sync with
    7. hit sync
    then when i want to add new photos, i just add them to that folder and hit sync again.

  • Not able to add user into Dataset Group  for RACF

    Hi,
    I am trying to add a RACF user to a dataset.I am getting following error message in log file. Pls. help
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: maoErrors:Cannot schedule a task for child table change, schedule item save failed
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: Error occurred while validating password policy '
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.APIS] Class/Method: tcFormInstanceOperationsBean/addProcessFormChildData encounter some problems: Cannot schedule a task for child table change, schedule item save failed
    Thor.API.Exceptions.tcAPIException: Cannot schedule a task for child table change, schedule item save failed
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
         at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
         at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
         at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
         at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
         at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
         at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
         at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
         at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
         at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
         at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
         at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
         at org.jboss.ejb.Container.invoke(Container.java:960)
         at sun.reflect.GeneratedMethodAccessor123.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
         at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
         at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
         at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
         at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
         at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
         at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
         at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
         at $Proxy758.addProcessFormChildData(Unknown Source)
         at Thor.API.Operations.tcFormInstanceOperationsClient.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy804.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.webclient.actions.UserDefinedFormAction.addChildFormData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.CSRFFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
         at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
         at java.lang.Thread.run(Thread.java:619)
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/eventPreInsert entered.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/tcDataBase left.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/eventPreInsert entered.
    2011-05-27 03:15:04,740 DEBUG (http-0.0.0.0-8080-7) [XELLERATE.SERVER] Class/Method: tcDataBase/tcDataBase left.
    2011-05-27 03:15:04,740 ERROR (http-0.0.0.0-8080-7) [XELLERATE.WEBAPP] Class/Method: UserDefinedFormAction/addChildFormData encounter some problems: Cannot schedule a task for child table change, schedule item save failed
    Thor.API.Exceptions.tcAPIException: Cannot schedule a task for child table change, schedule item save failed
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.addProcessFormChildData(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.addProcessFormChildData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)     
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
    Edited by: JRS on May 27, 2011 2:19 AM

    Follow:
    OIM: Getting an error when trying to add entry into child table
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=1066123&tstart=1365

Maybe you are looking for