Help! Big QT importing problems!

I've been importing a lot of movie files into iMovie for ages, and I rarely have problems. I've done dozens of these without an issue. But suddenly, everything I import looks like crap on my computer screen and even worse on a TV set.
-Sorensen3-based QTs have a halo effect around anything that moves, and anything that moves breaks down into horizontal lines if it moves too quickly (I think this is some kind of interlacing problem, but I don't really understand what interlacing is).
-A QT file done in H.264 has huuuge blocky video sections (artifacts?), especially in areas that are supposed to be solid black.
-Meanwhile, video grabbed from old iDVD files using DVDxDV looks all pixelated in iMovie, even material that was grabbed using the higest capture rates.
All of this started right around the time I installed the new Tiger update. Is this a coincidence?
More importantly, what can I do to fix these video files and the way they import into iMovie? I need to use them in a presentation soon and right now, they're basically unwatchable because the visual noise onscreen is so distracting. Can anyone help me out?

Hi Dolt:
Not really sure, but which version of quicktime do you have?
http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime703.ht ml
Some say to go back to the earlier version.
Sue

Similar Messages

More Imovie help pls. Importing problem

Hi gang..
First thanks for all the help... I appreciate it.. I don't want to give up on imovie just yet.
Im on a mac pro, with 5gb, for a system so it should not be slow.
I have found after testing that the only way that I can get a final product to look good is if I start my project with a
1080i hd. Any other settings show lots of shimmering (I think this is what I have from learning
When I import 100 files, All jpegs converted to fit within 1024x1024 max and maintaining appropriate size for the type of photo it comes out nice.
but... it is so slow.. about 10 seconds to add a transition
WHY?? The system should have enough horsepower.
I think more importantly is that I can get a nice output with this process after it has gone to idvd and made the dvd and I look at it on the tv. Its acceptable.. so a WIN !!!
But at this pace its taken me over 4 hours just to add tranistions
So.. I'm thinking it must be my setup somewhere. I made a guest account, but its no different.
I have tried diff resolutions of photos down to 640x640. Importing from aperture or iphoto.. (no difference)
So why do I have to make an 1080i Movie to get nice quality on the tv?
P.S I have tried multiple tv's and dvd players.. no differnece
Scratching my head over this one.
Thanks all.. I feel like that train.. I know I can.. I know I can lol

Hi g
May be I'm totally wrong but I would have been very surprised if it didn't
work exactly as You describe it.
5Gb - way to little.
Mac OS X is really depending heavely on UNIX and virtua memory managment.
To work OK You need about 10 to (more likely) 20 % of the hard disk size free.
eg. 80Gb hd = 8 - 16 Gb free to run OK
eg. 160Gb = 16 - 32 Gb
iMovie needs to this 13 Gb free per hour of miniDV capture and about 2 to 5
times more to work with.
16x9 and HD need may be 2 to 4 times more.
Video is a hard disk space demanding labour.
Adding external disks - You need to think of two things:
- Mac OS Extended formatted - NOT UNIX or DOS
- It is on Your internal drive You need at least 20 Gb free space. So you need
to free up this by moving other documents or projects out to the external one.
Yours Bengt W

Help - HDV tape import problem - Sony HC-3 broken - Questions/Warning

My Sony HC-3 HD camcorder has just failed. I've had it just over 3 years.
I really don't enjoy video editing much, and despite maybe shooting 20-30 tapes of HD footage of my young children, I'd only got round to importing a handful over Firewire, but was lulled into a false sense of security perhaps by treating the tapes as my film negatives (new tape each time).
The camcorder behaved a bit erratically a few weeks ago when inserting a tape, then the other day it gave an error, I ejected the tape and had a constant C32:11 error flashing. Lots of user reports on the web, no idea what the real issue is, but any suggested fixes didn't work.
Essentially I cannot close the tape transport compartment with or without a tape - it won't accept a tape and return to record/play position.
Almost feels as though something isn't clicking/catching when you push the tape in.
Anyhow, I thought if worst comes to worst I'll just buy Sony's latest model - then the realisation they'd discontinued consumer HDV tape camcorders. Not a happy bunny.
I've sent camcorder to local Sony repair center and am awaiting outcome.
Now my questions are:
1 - Is there any way of simply reading the tape data using an SD camcorder if I ever needed to ? - There are programs that use them to archive data so I guess in theory it must be possible just to read the data, unless it's stored in an SD compliant file format rather than just data.
2 - is 1080i HDV (1440x1080 res) as captured by the Sony HC3 a cross-vendor format or Sony specific - (if 1 is impossible) could I if needed say pick up a Canon HDV camcorder and use that to import my video?
3 - are we to assume now that DV/HDV is dead as a consumer format despite it's better image quality compared to hard drive/memory card video codecs.
Hopefully Sony will repair my camcorder for a fixed rate charge - if they can't or won't what are my options for importing the video I've got on tape?
There are bound to be companies who'll do this for a fee if worst comes to worst, but I feel a bit annoyed with Sony for dropping support for the format after buying an expensive camcorder only a few years ago.
Even if it can be repaired, I'm not sure I'll want to continue using it if there's a risk of future failure and inability to import old tapes. Frankly I'm glad I've used the video function on my Canon 5D II a lot in the last year or so for quick video clips even if many are transiently OOF.
Yes, my fault for not importing the tapes immediately after shooting, but I'd assumed that I would be able to import the data well into the future evene if it meant a new device.
AC

Jeremy Hansen wrote:
HDV is not dead!!! Heavens, the pros laugh at AVCHD and hard drive based cameras. When you shoot on HDV tape, you have a backup.
Sony do still manufacture HDV pro camcorders of course - it's the early adopter consumer they've left in the lurch.
One of my original reasons for using tape was this automatic backup - silly of me not to routinely import tapes to Mac of course.
To answer your questions:
1. No, you can't read it with an SD camera. you are correct that it is just 12GB of data, but no software really knows how to go back and forth, so to speak. In case you care, there was an app years ago (I forget which) that could use a Dv camera as a 12GB backup drive. But practically, no.
Shame really seeing as it's just data - I'd used the Firewire SDK kit DVHSCap app to pull off 12-13GB m2ts files in the past which I felt would be ok for computer archival, unedited direct playback on PS3 and fairly quick to convert to AIC as needed for future editing purposes using a utility.
I did wonder if DVHSCap might be able to pull the data from an SD camcorder, but maybe the tape just would not play.
2. HDV is HDV. If you had problems, pros would advise you to import with the same camera, or at least same brand. But, usually there are no problems. There shouldn't be, but occasionally there are.
I was hoping this was the case, great.
3. Image quality is NOT better with hard drive based camcorders. In fact, most use a higher rate of compression than HDV. What is the advantage? A tape-based camera takes an hour to import and hour. Hard drive cams go faster. Some look great, but there is no advantage over HDV.
Yes, the only advantage of HD/card based camcorders is simpler import faster than real time, and I'd always been concerned with HD camcorders you'd have too many eggs in one basket if the HD failed in between imports to computer.
I own an HC-3, and you have to realize it was an early camera in the high-def market. I don't use it often (except as a secondary) because of its optics.
I've always found it produced pretty acceptable results - constantly amazed that 3-4 year old products get regarded as obsolete by manufacturers who just want you to buy the latest gadget.
Here is my advice:
Get a Canon HDV camera. Use it to import your tapes, and enjoy its superior optics and color quality. Opinion? Yes, but I believe it.
I may consider that if repair fails - any model recommendations that would trounce the Sony?
Cheers
AC

Help needed re import problem

Hi,
I've mistakenly imported a batch of files from my Nikon as NEFs, rather than DNGs. Unfortunately I captioned and keyworded them before realising my mistake. To avoid re-captioning and keywording I'd prefer to change them to DNGs rather than delete all and re-import.
I've tried going to the import dialogue to copy them as DNGs, but it won't allow me to do it. Any suggestions gratefully recieved.
Regards,
Paul Thompson.

Just select them and click Library-> Convert to DNG in the menus.

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!

Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store

Hi every one can any one help i have a problem in importing java dump for

hi every one can any one help i have a problem in importing java dump for solman 4.0 mssql 2005 sr3

Hi wahed,
Please elobrate question not clear.
Regards,
Shahed iqbal

Good morning to all of you I have A mac and I did the mistake of upgrading my Lightroom 5.4 to 5.6 Now I can't import anything it says "Could not find namespace: AgCreativeCloudUtils" Could anyone help me resolve this problem? Should I uninstall the prog

Good morning to all of you
I have A mac and I did the mistake of upgrading my Lightroom 5.4 to 5.6 Now I can't import anything it says "Could not find namespace: AgCreativeCloudUtils"
Could anyone help me resolve this problem?
Should I uninstall the program and reinstall it
Thank you so much

I asked because an awful lot of people have recently been confused between downloading the Cloud and the perpetual versions of Lr - although I'm not automatically assuming your'e guilty of this - and can't understand why their serial no won't unlock their new software.
If the wrong version has been installed, then it must be uninstalled and the right one downloaded.

Lightroom import problem, or damaged catalogue

Hi, tried to import a large file of large raw pics directly from flash card into lightroom. the file was a bit big and it crashed.
now it wont import at all, even one pic from hard disk.
I ran the catalog optimiser. no change.
I upgraded from 2.6 to 2.7 hoping a bug fix might be there.
no better.
I removed lots of pics to reduce size (had over 8000 pics in lightroom) and re-optimised
but still no import. no error message just no importing.
any ideas anyone?

Hi , thanks John, sorry I have been away for a few days.
I am trying to get a consistent behaviour to a set of circumstances so I can give you specific details, in case it helps you spot the problem or suggest a cure.
here are details of todays experiments...
i now have 3 catalogs set up under the PC user where the problem occurs. (under the windows admin user there is no problem, only the one where the error/corruption has happened.)
the 3 catalogs are - 1. a brand new one I set up to try and see if i could recreate the importing failure
2. the original corrupted one.
3 an exported one from the original above
I have several folders of pictures copied from the flash drive onto the hard drive. the pictures are around 18 to 20 mb each taken in RAW.(pics from this camera have been processed many times before without problem)
If I take a folder with 17 pics in it - it imports fine into the new cat (number 1) but it fails after one or 2 pics in both 2 and 3.
When I import I use the following import settings :
add photos without moving, dont re-import suspected duplicates, dev settings -none, metatdata - none, keywords window - blank, Initial previews minimal.
I start the import, and loads a few pics (sorry when I repeat this sometimes it takes just one and sometimes a 2 or 3), then it stops with the import progress bar showing at top left of screen as partially imported. it hangs there and nothing happens, I come back later but no change. so I close lightroom and it says there is an import in progress do i want to quit or wait. well wait just hangs so i try quit.
When I open the same catalog again, it has the folder showing on the left but only one or 2 pics in it, so I tried the suggestion in your last post, i right clicked on the folder and selected synchronise. it syas it is waiting to import the reamining 14 or so pictures with ticks on 'import new photos', 'show dialog' and 'scan for metadata' so i try the import again. i click to show preview - all the pics show on the preview fine.
but the import tries and stops with the dialog progress bar in the top left and no activity.
I left it for ages but nothing.
As it works fine on the new small catalog and fine on different pc user catalogs, I think the problem must lie in the catalog of number 3 and exporting it (number2) also has the same problem.
So i am thinking I will just have to import all 8000+ pics into a new catalog and bin the old one however i will loose all my tagging and editing etc.
any othe ideas?

TS3634 Help, how to importing video in iMovie'11

I am using the Sony Handycam HDR-HC 9
OS X 10.8.4, MacBoo Pro early 2011
iMovie'11
I want to import the video shot with the Handycam into iMovie. The cable I am using is iLink to FireWire 800.
When I put the camera mode in to edit/play and I plug in the cable I excpected to be able to import the HDV into the iMovie.
It does not work, and I must say not any more.
About 6 months ago I did import video from the same camera to the sam iMovie Aplication on the same MacBook Pro
I could chose the import from and select the Handi cam etc. and I cpuld control from iMovie the handycam.
Recvently I wanted to import clips from the camera to my computer again and I was unableto do so.
In the iMovie app. I am unable to select the camera, in the view finder of the camera it only shows HDV in when I plug in the iLink cable.
The omly thing that has changed in the last 7 months since i last imported movie clips is OSX updates and iLive updates.
could this be the reason?
If so how can I correct this and import clips again from the camera.
Will realy appreciated if anybody can help me solve this problem.
Thank you.

Ok
I tried that but no go.
In the handy cam viewer as soon as I plug in the cabe it shows HDV out iLink and immediatly changes to HDV in iLink. I assume that the cable is right than.
I have no possiblety jet to check the cable but it is only 6 months old and not used much.
The port on the MacBook pro is ok I used a firewire 800 external drive and it shows up an I can browse the disk.
Regards

LR3.2 import problem on computer with Windows OS

LR3.2 import problem on Windows OS
This is a continuation of a question that I posed on August 22, 2010 in the discussion string "Cannot import CR2". I have not been able to resolve the issue of importing an image into an existing folder location. I had not been able to work on this issue for a number of weeks due to other circumstances, until today.   Note that the following people had attempted to provide answers and suggestions already: ssprengel, JayS In CT.
I use a laptop with a Windows operating system and a Macintosh desktop with Snow Leopard. I run Lightroom on both of them. The Windows laptop has Windows Vista Home service pack 2, version 6.0 [6002]. Around August 12th I upgraded from Lightroom 2 [481478], to Lightroom 3 on the laptop. I left the LR2 on the laptop as well as LR3. On September 12th I upgraded the laptop to LR3.2. No other changes have been to the laptop or its software applications that I know of.
My current attempts at resolving the issue reveal that when I created a new catalog "Test Catalog" in LR3 and saved that catalog to my desktop new folder labeled "Test Catalog" that I can import an image into LR3.2 to a new folder on the laptop's desktop. I then deleted the images via LR3.2 Folders Remove function and tried to import the images into an existing folder as presented in the LR3.2 Import dialog, but get the error message "The following files were not imported because they could not be read.".   When I import images into a new folder placed on the desktop, I can use all functions in LR3 e.g. Develop module. I cannot import images into existing folders on the laptop's hard drive - I have tried importing into the entire existing folders in the following hierarchy: c:\users\Michael\My Documents\My Pictures\2010 but always get the same error message.
LR3.2 does correctly backups upon exiting each time I quit the program, so I know that there isn't any issue of writing to that backup folder which is contained in an upper folder that contains the lightroom catalogs. I have even created a new Word file, saved it into the folder with Lightroom catalogs, opened it up, modified it, saved it, and saw that it works OK, so that tells me there is no problem with a Read-Only folder attribute.
I cannot recall if upon the upgrade from LR2.6 to LR3 that I chose to upgrade the catalog to LR3 version. Would that matter, if yes, what do I verify, how do I manual upgrade the catalog.
History of actions between August 10th that I have taken follows between the [[[[ and ]]]]:
[[[[Preference settings for Default Catalog are set to start with a specific catalog that I call "Lightroom master catalog", it is not set to the "Load most recent catalog".
All of the following were using my laptop: Previously I had no problem with LR2 for any functions. I just purchased an Epson 7000 media storage device, and in early August and practiced importing images into LR2, and those images were pulled in OK. Next, I upgraded to LR3. I discovered that the Epson's images had been placed into a wrong folder when I opened LR3. I used the remapping function in LR3 to move the images into the correct folder. Next, I used a SanDisk card reader to import images into LR3 into an existing folder of images, but the following error message appeared "the following files were not imported because they could not be read" (Import Results said 'some import operations were not performed'). I tried importing a single image, and multiple images, but had the same error. I tried switching the card reader to each of 4 different USB port on the laptop, with the same error occurring on each USB port used.
In order to try to isolate the problem. I took the SanDisk card reader with the memory card and successfully imported the images into LR3 on my Macintosh desktop computer; so to me the problem is not the card reader or the memory card. I also used the SanDisk recovery disk while using my laptop to look at the files on the memory card and I could see all the images correctly while in the recovery program, but I have not copied the images to the laptop's hard disk, and have not tried an import into the laptop's LR3. I did not import images directly from my camera to the laptop LR3 since I did not think it would help with the troubleshooting.
I then ran the Repair from the Adobe LR3 CD upgrade disk, on my laptop. Then I tried doing the import using the SanDisk reader and memory card, but the same problem occurred and same error message, that the files could not be imported (I was trying to import into a folder of existing images). I then used the Laptop's Control Panel function to remove LR3 application. Then I did a fresh upgrade of LR3 on my laptop, but the same error message and I am unable to do any import of the memory card from the card reader. I then tried to do an image import from the Epson 7000 into the laptop, and the same error message and I am unable to do any import into a folder with existing images.   I then tried doing an image import into LR2 on the laptop, and got the same problem to occur when trying to import into an existing folder of images. I have a couple of Canon EOS SLR digital cameras, and the issue occurs for any of the file types of the cameras.
Went into LR3 Preferences, General Tab, I now checked the previously unchecked box for Import Options - "Show import dialog when a memory card is detected".
Connected the Canon XTi directly with a cable to the laptop computer. Note that Canon's information said that Picture Transfer Protocol is automatically used when the XTi is directly connected to a computer, so I did not need to change anything in the camera's menu for communications choices (there is no communication menu in fact). I selected one image and copied it to the laptop desktop. Tried to import it into LR3 into a folder of existing images but got the error message "Could not copy a file to the requested location." While in LR3, I changed the location of where the file would be copied into - any of my existing folders of images; tried 5 different folders, but kept getting the same error message.
With the card reader connected via USB port on the laptop, I copied one image file to the desktop, and then tried importing into LR3 into a folder of existing images. Got the error message "Could not copy a file to the requested location."]]]]

I am not clear if by 'import' you are trying to copy or move the files from a location to another or if you are adding the files to a catalog. My comments may not, therefore, be too helpful.
Firstly, with both LR2 and LR3 installed you will have both catalogs present, but if you try to open the LR2 catalog with LR3 you will be prompted to update the catalog. You will thus know which catalog you are working on.
Secondly, if you are reading direct from the camera, you should connect using the 'PC connection' mode.
Thirdly, there is an issue with reading .CR2 files directly from the early Canon DSLRs (in Europe named 300D, 350D, 400D). While they are visible with the Canon software, they can not be seen with Windows explorer nor can they be accessed with Lightroom.
I suggest that you take the CF card out of the camera and copy the files using Windows Explorer in to the destination folder. You are then sure that the files are on the PC.
If you have the right Codec installed, you can view them with Windows photo gallery; if you don't, you can use one of the Canon software packages to view the files. You are then sure that the files are not corrupted.
Then import the files to your LR catalog using the normal import routine selecting 'add without moving'. I have tried this routine successfully using my 350D using both LR1.x and LR3.x. If that doesn't work - I'm lost.
Frank

Please I really need help with this video problem.

Hi!
Please I need help with this app I am trying to make for an Android cellphone and I've been struggling with this for a couple of months.
I have a main flash file (video player.fla) that will load external swf files. This is the main screen.When I click the Sets Anteriores button I want to open another swf file called sets.swf.The app is freezing when I click Sets Anteriores button
Here is the code for this fla file.
import flash.events.MouseEvent;
preloaderBar.visible = false;
var loader:Loader = new Loader();
btHome.enabled = false;
var filme : String = "";
carregaFilme("home.swf");
function carregaFilme(filme : String ) :void
var reqMovie:URLRequest = new URLRequest(filme);
loader.load(reqMovie);
loader.contentLoaderInfo.addEventListener(Event.OPEN,comeco);
loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,progresso);
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,completo);
palco.addChild(loader);
function comeco(event:Event):void
          preloaderBar.visible = true;
          preloaderBar.barra.scaleX = 0;
function progresso(e:ProgressEvent):void
          var perc:Number = e.bytesLoaded / e.bytesTotal;
          preloaderBar.percent.text = Math.ceil(perc*100).toString();
          preloaderBar.barra.scaleX = perc;
function completo(e:Event):void
          preloaderBar.percent.text = '';
          preloaderBar.visible = false;
btHome.addEventListener(MouseEvent.MOUSE_DOWN,onHomeDown);
btHome.addEventListener(MouseEvent.MOUSE_UP,onHomeUp);
btSets.addEventListener(MouseEvent.MOUSE_DOWN,onSetsDown);
btSets.addEventListener(MouseEvent.MOUSE_UP,onSetsUp);
btVivo.addEventListener(MouseEvent.MOUSE_DOWN,onVivoDown);
btVivo.addEventListener(MouseEvent.MOUSE_UP,onVivoUp);
btHome.addEventListener(MouseEvent.CLICK,onHomeClick);
btSets.addEventListener(MouseEvent.CLICK,onSetsClick);
function onSetsClick(Event : MouseEvent) : void
          if (filme != "sets.swf")
                      filme = "sets.swf";
                      carregaFilme("sets.swf");
function onHomeClick(Event : MouseEvent) : void
          if (filme != "home.swf")
                      filme = "home.swf";
                      carregaFilme("home.swf");
function onHomeDown(Event : MouseEvent) : void
          btHome.y += 1;
function onHomeUp(Event : MouseEvent) : void
          btHome.y -= 1;
function onSetsDown(Event : MouseEvent) : void
          btSets.y += 1;
function onSetsUp(Event : MouseEvent) : void
          btSets.y -= 1;
function onVivoDown(Event : MouseEvent) : void
          btVivo.y += 1;
function onVivoUp(Event : MouseEvent) : void
          btVivo.y -= 1;
Now this is the sets.fla file:
Here is the code for sets.fla
import flash.utils.Timer;
import flash.events.TimerEvent;
var video:Video;
var nc:NetConnection;
var ns:NetStream;
var t : Timer = new Timer(1000,0);
var meta:Object = new Object();
this.addEventListener(Event.ADDED_TO_STAGE,init);
function init(e:Event):void{
video= new Video(320, 240);
addChild(video);
video.x = 80;
video.y = 100;
nc= new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatusEvent);
ns.bufferTime = 1;
ns.client = meta;
video.attachNetStream(ns);
ns.play("http://www.djchambinho.com/videos/segundaquinta.flv");
ns.pause();
t.addEventListener(TimerEvent.TIMER,timeHandler);
t.start();
function onStatusEvent(stat:Object):void
          trace(stat.info.code);
meta.onMetaData = function(meta:Object)
          trace(meta.duration);
function timeHandler(event : TimerEvent) : void
if (ns.bytesLoaded>0&&ns.bytesLoaded == ns.bytesTotal )
            ns.resume();
            t.removeEventListener(TimerEvent.TIMER,timeHandler);
            t.stop();
The problem is when I test it on my computer it works but when I upload it to my phone it freezes when I click Sets Anteriores button.
Please help me with this problem I dont know what else to do.
thank you

My first guess is you're simply generating an error. You'll always want to load this on your device in quick debugging over USB so you can see any errors you're generating.
Outside that, if you plan on accessing anything inside the SWF you should be loading the SWF into the correct context. Relevant sample code:
var context:LoaderContext = new LoaderContext();
context.securityDomain = SecurityDomain.currentDomain;
context.applicationDomain = ApplicationDomain.currentDomain;
var urlReq:URLRequest = new URLRequest("http://www.[your_domain_here].com/library.swf");
var ldr:Loader = new Loader();
ldr.load(urlReq, context);
More information:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7de0.html
If you're doing this on iOS you'll need to stripped SWFs if you plan on using any coding (ABC) inside the files. You mentioned iOS so I won't get into that here, but just incase, here's info on stripping external SWFs:
http://blogs.adobe.com/airodynamics/2013/03/08/external-hosting-of-secondary-swfs-for-air- apps-on-ios/

Automatic import problem

Can someone tell me what I may be doing wrong. When I place a CD in my CD player it boots it to iTunes, names the songs and checks the songs. Howeverl, to import the songs I have to import the songs individually from the CD. Is there any way that I can place the CD in the CD player and automatically do the entire importing?

no problem!
(i found this saves so much time during the first big CD-importing sessions with itunes, although i switched back to "show songs" once i'd finished with that.)
love, b

Export and import problems

i have 2 major problems importing my application from htmldb.oracle.com to my serevr at home.
1.
i export my application and thems from htmldb.oracle.com.
when i opened the sql export file i saw that all hebrew chracters was "jibrish".
how can i export my application with hebrew fonts ?
2. i tried to export and import xml data (my tables data).
the export xml file showing me the hewbrew data but when i import it to my tables it gets ????????? instead of hebrew.
i think it's the nls lang but i don't know what nls land i need and where to change it
(database ,enviroment....)
can someone help me with this problems ?
thanks
p.s
my db is 10.1.0.3
red hat linux as 4 on vmware 4.5
my nls parameters:
nls_language: american
nls_territory: america
nls_characterset: we8iso8859p1
nls_nchar_charcterset: al16utf16
thanks

Zvika,
I have two options that may work for you. First, define the fields that have Hebrew characters using the CHAR qualifier. Example, varchar2(30 char). That allows you to store double byte characters from other languages, and overrides the nls_length_semantics (byte default) parameter.
Or, you could set the nls_length_semantics to default to char. It definitely uses more space when the char qualifier is used, so it's probably best to override the byte default only when necessary.
Hope that helps!
Also, I posted the 'Blogging Tool for HTMLDB' question with the username 'aufan89', which I had to change because my email changed.
So my new username is now 'aufan1989'. I look forward to your email when you get your app fixed and posted onto HTMLDB Studio!
Thanks!

Help! Big QT importing problems!

Similar Messages

Maybe you are looking for