Help!Could someone kown how to call ArcGIS application within Labview?

For my desigh, ArcGIS must be as a application within Labview.Since I haven't found any information in this field. Could some help?
Now I have finished the two individual parts of Labview and GIS module, but the main problem is how to call for GIS module in Labview. Maybe some one can give me some suggestion.
Thank all!

Hello �
If you created a DLL out of your GIS application you could then call it from LabVIEW using a Call Library Function Node.
The best place to start understanding Call Library Function Nodes is the LabVIEW Help.
Also, you might want to take a look at this link.
Hope this helps!
S Vences
National Instruments

Similar Messages

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

How do i fix bootcamp Assistant I didn't even install anything yet I tried installing windows but before I did anything it wouldn't open I went to Utilites in finder and it still wouldn't open Could someone suggest how to fix the problem

How do i fix bootcamp Assistant I didn't even install anything yet I tried installing windows but before I did anything it wouldn't open I went to Utilites in finder and it still wouldn't open COuld someone suggest how to fix the problem

You can try to update to the current Firefox 28 release.
*Help > About Firefox
You can find the full version of the current Firefox 28.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
It is possible that the cookies.sqlite file that stores the cookies is corrupted if clearing cookies doesn't work.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookies files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

How to call the application that submitted with the ipod touch 5?? is a ninja

how to call the application that submitted with the ipod touch 5?? is a ninja

You should not discuss beta software here at all.
This is a developer only question and should be posted in the developer forum

How to deploy APEX Application within EBS module

Hi Guruz,
How to deploy APEX Application within EBS module, for example I have developed APEX application by using EBS Tables like OA Framework Development in jDeveloper. or anyone can clear my understanding regarding jDeveloper and APEX differences and both are same in relation with EBS Development.
Regards,

Hello,
First of all you can delete delete the development environment, by executing apxdevrm.sql script.
You can also wrap your packages.
Regards

Calling struts application within a portlet

Can anyone explain step wise procedure to call struts application within a portlet.or refer any tutorial for this.

Amir,
this might be because you are using the plain struts taglibs. you should use the pdk-struts taglibs. more specifically, you should use the pdk-struts-html taglib instead of the struts-html lib, as the latter renders URLs for a struts application whereas you need portal-enabled urls, which are provided by the pdk-struts-html lib.
You can either change the taglib reference in your web.xml file to map the plain sruts-html.tld to the pdk-struts-html.tld (don't forget to include it and its jarfile in your deployment file), or you can add the library to every jsp page and replace the <html:whatever> tags by <pdk-html:whatever> tags. (or your other favourite prefix).
Regards,
Benjamin

How build stand alone application without labview

I have main vi and contain the sub vi i need build stand alone application without labview
how build stand alone application without labview?
thank and regard

I assume that the poster means to run this on a computer without the development environment installed. That is what the app builder is for. Review Altenbach's post. This being said, there will need to be a runtime engine installed on the target PC. You can 'bundle' that with your build application and install it together, although I usually prefer Not to do that, and make that a seperate step because it is rather large, and if the target already has it, then it is wasted space. Speaking of run time engine, I have seen negative reactions to it by my customers, but after sitting down and explaining that, with few exceptions, every application requires a run time engine. It is just that some are bundled with windows, or installed through windows update. Once explained, it usually quiets the opposition. [Paul steps off soap box now]
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

How to call fn form within a procedure? - pl help

Hello
I have a procedure which has a set of statements that is called repeatedly.i would like to put them inside a function, passing an IN parameter as well. How to do that? and how do u call the fn from within the procedure?
Pl help.
rgds

SQL> create or replace package calls is
2      procedure proc ;
3 end ;
4 /
Package created.
SQL> create or replace package body calls is
2      function func(p_param in number) return number is
3      begin
4          dbms_output.put_line('param is:'||p_param) ;
5          return(p_param * 2) ;
6      end ;
7      procedure proc is
8          ret_val number ;
9      begin
10          ret_val := func(100) ;
11          dbms_output.put_line('ret_val='||ret_val) ;
12      end ;
13 end ;
14 /
Package body created.
SQL> exec calls.proc ;
param is:100
ret_val=200
PL/SQL procedure successfully completed.
SQL>Message was edited by:
Kamal Kishore

Could someone explain how to use of the object Thermometer?

Hi to all,
please, could someone write a real example explaining how to use the thermometer in order to indicate the progress of a process like to submit a document?
I need to do it exactly to indicate this process in Adobe Reader.
Thanks.
Dan

Sorry but I surely have explained my problem badly. I understand how to use the object thermometer perfectly.
I need to use this object in order to determine the progress of the document's transference when I submit a PDF form from Adobe Reader.
I'm having problems when I try to do this, and I would like to know if there exists some way to do it.
b I have tried the following:
var t = app.thermometer;
t.duration = 1000;
// How can I know this value?
t.begin();
t.text = "Please wait";
// Is this a madness?
while( event.target.submitForm( { cURL: [...], cSubmitAs: [...] } ) )
t.value++;
t.end();
Thank you for your time
Dan

How to call an application or a execute file in trigger?

Hi,
Can I call an application or a execute file in trigger?
And how to do it?

Hi Sarah,
It would have been helpful to answer your question if your requirement was more detailed.
Anyway, I assume that you want to know how to execute or run a sql script file from a trigger and if that is the case then you can use EXECUTE IMMEDIATE stmt in your trigger as follows-
EXECUTE IMMEDIATE '@script_name';
Regards,
Murali Mohan

How to call methods from within run()

Seems like this must be a common question, but I cannot for the life of me, find the appropriate topic. So apologies ahead of time if this is a repeat.
I have code like the following:
public class MainClass implements Runnable {
public static void main(String args[]) {
Thread t = new Thread(new MainClass());
t.start();
public void run() {
if (condition)
doSomethingIntensive();
else
doSomethingElseIntensive();
System.out.println("I want this to print ONLY AFTER the method call finishes, but I'm printed before either 'Intensive' method call completes.");
private void doSomethingIntensive() {
System.out.println("I'm never printed because run() ends before execution gets here.");
return;
private void doSomethingElseIntensive() {
System.out.println("I'm never printed because run() ends before execution gets here.");
return;
}Question: how do you call methods from within run() and still have it be sequential execution? It seems that a method call within run() creates a new thread just for the method. BUT, this isn't true, because the Thread.currentThread().getName() names are the same instead run() and the "intensive" methods. So, it's not like I can pause one until the method completes because they're the same thread! (I've tried this.)
So, moral of the story, is there no breaking down a thread's execution into methods? Does all your thread code have to be within the run() method, even if it's 1000 lines? Seems like this wouldn't be the case, but can't get it to work otherwise.
Thanks all!!!

I (think I) understand the basics.. what I'm confused
about is whether the methods are synced on the class
type or a class instance?The short answer is; the instance for non-static methods, and the class for static methods, although it would be more accurate to say against the instance of the Class for static methods.
The locking associated with the "sychronized" keyword is all based around an entity called a "monitor". Whenever a thread wants to enter a synchronized method or block, if it doesn't already "own" the monitor, it will try to take it. If the monitor is owned by another thread, then the current thread will block until the other thread releases the monitor. Once the synchronized block is complete, the monitor is released by the thread that owns it.
So your question boils down to; where does this monitor come from? Every instance of every Object has a monitor associated with it, and any synchronized method or synchonized block is going to take the monitor associated with the instance. The following:
synchronized void myMethod() {...is equivalent to:
void myMethod() {
    synchronized(this) {
...Keep in mind, though, that every Class has an instance too. You can call "this.getClass()" to get that instance, or you can get the instance for a specific class, say String, with "String.class". Whenever you declare a static method as synchronized, or put a synchronized block inside a static method, the monitor taken will be the one associated with the instance of the class in which the method was declared. In other words this:
public class Foo {
    synchronized static void myMethod() {...is equivalent to:
public class Foo{
    static void myMethod() {
      synchronized(Foo.class) {...The problem here is that the instance of the Foo class is being locked. If we declare a subclass of Foo, and then declare a synchronized static method in the subclass, it will lock on the subclass and not on Foo. This is OK, but you have to be aware of it. If you try to declare a static resource of some sort inside Foo, it's best to make it private instead of protected, because subclasses can't really lock on the parent class (well, at least, not without doing something ugly like "synchronized(Foo.class)", which isn't terribly maintainable).
Doing something like "synchronized(this.getClass())" is a really bad idea. Each subclass is going to take a different monitor, so you can have as many threads in your synchronized block as you have subclasses, and I can't think of a time I'd want that.
There's also another, equivalent aproach you can take, if this makes more sense to you:
static final Object lock = new Object();
void myMethod() {
    synchronized(lock) {
      // Stuff in here is synchronized against the lock's monitor
}This will take the monitor of the instance referenced by "lock". Since lock is a static variable, only one thread at a time will be able to get into myMethod(), even if the threads are calling into different instances.

How to call webservice application using Browser

Hi Everybody,
Synchronous Scenario: Calling XI Server using WebServices( Sending the Customer no through Soap and from there the receiver adapter RFC is picking that no and it will send it to R/3 using BAPI and getting the Customer Details from R/3.
I followed the below two blogs and I created the complete scenario. And I deployed the ear file in WebAs in xi server.
Now the question is how to run this program using the browser. That is how to call.
Message Interface Name: CDWS_MI
Service Name : Soap_Service
Namespace : urn:xiwebservicesusingwebdynpro.com
Can you tell me how to call through the browser?
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3592---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>1
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3593---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>2
Advance thanks,
Abdullah Shaik.

Hi,
It's not clear to me what you did. Have you exposed an XI Message Interface through a Web Service? Or have you developed a Web Service in the other way? What is the "ear" that you said? Is an webdynpro app? If it is, I think your question would be properly answered at WebDynpro forum
cheers!
roberti

How to call another program from LabVIEW?

Hi!
Is there anyone that can answer my question? I have found a similar thread where the user needed to call labVIEW from some program but I want to do the opposite.
I made a program in labVIEW that communicates via COM-ports (serial communication) with the processor I use at the job (Ubicom´s IP2022).
Now I want to add more funcionality to this program. I want to be able to program re-program IP2022 through this LabVIEW application.
The programming is done via an Ethernet-dongle. I start a program called IP2kProg, I write the ip-address of the dongle and the program-file (.elf) downloads at this address. But how can I do this from
LabVIEW, do I need to open IP2kProg or can I send some values to it via LabViEW?
Ant suggestions?
Thanks, Amir

Amir,
There are couple of options:
1. If your IP2kProg program has a command-line interface, you can use LabVIEW's System Exec.vi and send the commands and parameters to it.
2. If the IP2kProg has an API / exported functions, you can call them from LabVIEW using the Call Library Function Node.
Hope this gives you some ideas.
-Khalid

How to call external application (transaction launcher) from event method

Hi all
Can somebody tell me which program lines to put into an event handler method in a view controller to get an external application called. I intend to define the link to the external application in the Transaction Launcher. But I cannot find any instructions on how to call the Transaction Launcher from my event handler method. I do not want to launch the application from the navigation bar, ONLY via a link in a list of invoices in a table view, and I want to press the invoice number to get an external application called to display the invoice. My event handler method gets called fine enough, but I have no clue which program lines to put into the method to pass on the call to the Transaction Launcher
Best regards
Arne Thage / MarchIT / Denmark

hi,
check class CL_CRM_UI_LTX_NAVBAR_PARAM.
call method : CREATE_PARAMETER_OBJECT with parameters
IV_LINK_ID     Importing     Type     CRMT_UI_LOGICAL_LINK_ID                                                                                Logical Link ID
IV_PARAMETER     Importing     Type     CRMT_UI_LINK_PARAMETER                                                                                Link Parameter
RV_RESULT     Returning     Type Ref To     IF_BOL_BO_PROPERTY_ACCESS                                                                                BO Attribute
I think it should work but have never done myself.
Best Regards
Pankaj Kumar

Help!Could someone kown how to call ArcGIS application within Labview?

Similar Messages

Maybe you are looking for