How to call an application or a execute file in trigger?

Hi,
Can I call an application or a execute file in trigger?
And how to do it?

Hi Sarah,
It would have been helpful to answer your question if your requirement was more detailed.
Anyway, I assume that you want to know how to execute or run a sql script file from a trigger and if that is the case then you can use EXECUTE IMMEDIATE stmt in your trigger as follows-
EXECUTE IMMEDIATE '@script_name';
Regards,
Murali Mohan

Similar Messages

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

How to call the application that submitted with the ipod touch 5?? is a ninja

how to call the application that submitted with the ipod touch 5?? is a ninja

You should not discuss beta software here at all.
This is a developer only question and should be posted in the developer forum

How to call external application (transaction launcher) from event method

Hi all
Can somebody tell me which program lines to put into an event handler method in a view controller to get an external application called. I intend to define the link to the external application in the Transaction Launcher. But I cannot find any instructions on how to call the Transaction Launcher from my event handler method. I do not want to launch the application from the navigation bar, ONLY via a link in a list of invoices in a table view, and I want to press the invoice number to get an external application called to display the invoice. My event handler method gets called fine enough, but I have no clue which program lines to put into the method to pass on the call to the Transaction Launcher
Best regards
Arne Thage / MarchIT / Denmark

hi,
check class CL_CRM_UI_LTX_NAVBAR_PARAM.
call method : CREATE_PARAMETER_OBJECT with parameters
IV_LINK_ID     Importing     Type     CRMT_UI_LOGICAL_LINK_ID                                                                                Logical Link ID
IV_PARAMETER     Importing     Type     CRMT_UI_LINK_PARAMETER                                                                                Link Parameter
RV_RESULT     Returning     Type Ref To     IF_BOL_BO_PROPERTY_ACCESS                                                                                BO Attribute
I think it should work but have never done myself.
Best Regards
Pankaj Kumar

How to call WD Application from another WD Appliction

Hi all,
how can we call webdynpro application from another wbdynpro application on click of a button in the same browser.
pls suggest
regards
vishal

Hi Vishal,
Just try to Embed the another WD Component into Component Controller first.
And then Create a View and map it to window as U regularly do,
then in Window- Explore the tree until that View, now open Context Menu for Embed View Option and from the scroll U get search for that WD Component U wanna Embed.
U also have to handle Plugs here, Because the result application required some parameters to be passed that U do from ur first application by passing those values through Plugs.

Help!Could someone kown how to call ArcGIS application within Labview?

For my desigh, ArcGIS must be as a application within Labview.Since I haven't found any information in this field. Could some help?
Now I have finished the two individual parts of Labview and GIS module, but the main problem is how to call for GIS module in Labview. Maybe some one can give me some suggestion.
Thank all!

Hello �
If you created a DLL out of your GIS application you could then call it from LabVIEW using a Call Library Function Node.
The best place to start understanding Call Library Function Nodes is the LabVIEW Help.
Also, you might want to take a look at this link.
Hope this helps!
S Vences
National Instruments

How to call webservice application using Browser

Hi Everybody,
Synchronous Scenario: Calling XI Server using WebServices( Sending the Customer no through Soap and from there the receiver adapter RFC is picking that no and it will send it to R/3 using BAPI and getting the Customer Details from R/3.
I followed the below two blogs and I created the complete scenario. And I deployed the ear file in WebAs in xi server.
Now the question is how to run this program using the browser. That is how to call.
Message Interface Name: CDWS_MI
Service Name : Soap_Service
Namespace : urn:xiwebservicesusingwebdynpro.com
Can you tell me how to call through the browser?
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3592---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>1
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3593---- [original link is broken] [original link is broken] [original link is broken] [original link is broken]
>2
Advance thanks,
Abdullah Shaik.

Hi,
It's not clear to me what you did. Have you exposed an XI Message Interface through a Web Service? Or have you developed a Web Service in the other way? What is the "ear" that you said? Is an webdynpro app? If it is, I think your question would be properly answered at WebDynpro forum
cheers!
roberti

How to call java application in Windows NT environment?

I have a JDBC application running against oracle database on NT server. There is another non-java application need to call my java application. The programs that non-java program can call are .exe, .dll, and .bat files. I wrote a Dos script and save it as .bat file. Every time this .bat file was called, the dos screen will be shown. Anything I can do to let Dos screen not shown, or anything I can do to wrap my java classes into an .exe file? Thanks in advance.

If your tool can run a .exe and supply arguments, why not simply invoke "javaw <jvm-args> <class> <class-args>"?

How to package an application as a JAR file?

I want to package an executed JAR file,how to do?
"jar cvf jar_name class_name"? But it can't run,:( help me.
Thanks in advance.

Suppose your main class call MyMainClass. You need to create a file called "mymanifest". In the mymanifest file, you need to include following line:
Main-Class: MyMainClass
Then you need to jar your jarfiles by:
jar cvfm classes.jar mymanifest -C foo/ .
After this, you can run your jar file by java -jar classes.jar.

How can I run a Local PC executable file from Enterprise Portal?

I want to run local PC executable files from inside the portal. To be more specific I want to be able to open the Outlook and some powerbuilder executable applications.
How can I do it?

If you absolutely want to do it, you can use vbscript for it (though there are a lot of security contstraints)
See Re: Displaying office programs

How to include LabVIEW Run-Time in executable file ?

Hello folks,
I have an application that need the user to simply calling executable file without setting up LabVIEW run-time because my executable file will be posted in LAN and anyone can run it remotely. What should I do? Any help very appreciate...
Thanks so much

You have to have labVIEW run-time installed on your computer in order to run a LabVIEW programs (vi or exe). What you can do when you distribute an exe file is to create an installer which lets you install LabVIEW run-time and create a menu item (in Windows) in the Start>>Programs menus. Then you can distribute the whole package and after running the installer, LabVIEW run time as well as the exe is installed.
You can do this in the installer settings of the Application builder (when you create the .exe file). Go to the "Advanced" section. There you can add the LabVIEW run-time Engine to the installer.
One other possibility you can do if several people want to use the programm over Lan is to use the LabVIEW webserver. You can run a programm somewhere on the
network and other people can open the front panel in their Webbrowser. But maybe that's not exactly what you want. ??

How to call translation template from bursting control file.

Hi All,
Greetings!!!!!!!!!!!!!
Need help on calling translation template from the bursting control file.
While calling the translation template from bursting control file it ends in error. Following is the error
[063010_063059160][][EXCEPTION] The URL ( xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true ) is invalid.
But same control file is working for standard tempalte.
Here is the sample control file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !=''and POH_ORG_ID = 54]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Please let me know how to call a translation template from bursting.
Thanks
Rajesh

Got the solution...
This is how we have to call a translation template from bursting file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL.fr.CA" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161 and CLANGUAGE2 = 'fr']"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 54 or POH_ORG_ID = 56 or (POH_ORG_ID = 161 and CLANGUAGE2 = 'en')]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
where
XXX - Application shortname
XXXPOXPRPOL - Template Code
Hope this helps!!!!!!!!!!!!!!!!!!!!!
Regards
Rajesh

How to call a database controller in backing file

Hello,
First of all, I'd like to apologize if this question is posted by someone else before. But because I haven't been to find the answer so I just post this question here with hope that someone will have the answer for me.
I am using weblogic 8.1 SP3. I am trying to build a web portal which requires users to login and logout. Based on the tutorials from BEA and the documents that I read in this forum, I decided to use backing file to check for the username and password. I am using MySQL database and I have a page flow controller which is based on the database control. How can I call that control in the backing file? Or is there anyway to compare the username and password that the user enters to the ones in the MySQL tables? I don't want to create a database connection in that backing file since the page flow controller can do that for me already.
Any help is appreciated
Thanks in advance
TL

select ename from emp@dblink
...lose the double quotes.
Scott

How to change File Kind (not "how to assign an application to open a file?)

I build the toc.ncx file (part of the ePub setup) automatically, based on user input and source file content. It's fine, except that the file Kind (as shown in Finder Preview, for example) is Plain Text.
The Kind should be Unix Executable File (the actual description is "zmedia-type="application/x-dtbncx+xml") in order for the file to function correctly with the rest of the ePub generation.
I could set the file Kind in the program (I think!), except that I do not know what the code for such a Kind is.
Can you help?
Message was edited by: David Neale1
Message was edited by: David Neale1

To make the file a Unix executable can be done as follows:
Open the Terminal application in the Utilities folder and enter the following:
sudo chmod 755 /pathto/filename
Press RETURN. Enter your admin password at the prompt; it will not be echoed. Alternatively put a space after "755" then drag the file's icon into the Terminal window.
If you want the Unix icon simply set the file's default application to Terminal by selecting the file then Press COMMAND-I to open the Get Info window. Change the default application in the Open With section. If you want all .ncx files the same way then click on the Change All button.

How to package Java application in a setup file?

I wish to package my application in a setup file. On double clicking the icon of setup file, the installation of the application may begin. I like to include modified JVM, Acrobat Reader along with class files of the application (packaged in a JAR file) in the setup file, i.e., I want to spare users from the headach of downloading before installing the JVM or Acrobat Reader, etc.
Things like this have been done in commercial products such as Dreamweaver.
I have no idea right now how this can be done, but I have to work on this. Any hint, suggestion, direction, advise would be highly appreciated.

This is a simple free program which will allow you to package your JVM etc with all your other files and it'll give you a small exe file which will invoke the VM and start your app. It only works on windows btw.
http://www.rolemaker.dk/nonRoleMaker/javalauncher/marner_java_launcher.htm
After you've set up the program all you need to do is download one the many shareware install programs from download.com. They're normally really easy to use, you just tell them the dir/s you want to package, which files, usually the exe, to add a shortcut to. It will then build a setup exe file for you.

How to call an application or a execute file in trigger?

Similar Messages

Maybe you are looking for