Help for "insert data to variable tables"

hi, guys.
I want to make a tool to upload mass-data then insert the data to tables of SAP for integrative test.
for example, to input the object tablename "AAAA" from screen, the program willl find the information of this table then input the data to the "AAAA" tables.
But i have no idea how to define the internal table to suit various tables ( by define dynamic table? or any other ways) ,could you kindly give me some advice?
thanks a lot in advance.
Message was edited by:
huijuan zhao

hi zhao,
welcome to sdn,
for your requirement u can use bdc to upload file to internal table then u can update these internal table fileds to sap tables.
or
use gui_upload function module to upload data to internal table then u can use just insert keyword to update sap tables.
see this sample code to update the database table edpar,
report zsd_edpar_update no standard page heading.
*&Purpose:
*& program will be used to update EDAPR table on a daily basis.
*& This update will be based on Customer Sold To / Ship To partner
*& functions assignment. Ship To customer(s) will be linked to
*& the appropriate Sold To customer using the ?Acct at Cust?
*& number as a reference. Then, Ship To customer(s) will be
*& set up withthe appropriate partner function with the Sold
*& To customer.it updated the DB tabel and gives the information
*& of customer level visibility t account receivable.
*define database tables...
tables: edpar,
 knvv,
 knvp.
*define types...
types: begin of t_tab_edpar,
 mandt type mandt,
 kunnr type kunnr,
 parvw type parvw,
 expnr type edi_expnr,
 inpnr type edi_inpnr.
types: end of t_tab_edpar.
types: begin of t_tab_knvv,
 kunnr type kunnr,
 vkorg type vkorg,
 vtweg type vtweg,
 spart type spart,
 eikto type eikto.
types: end of t_tab_knvv.
types: begin of t_tab_knvp,
 kunnr type kunnr,
 vkorg type vkorg,
 vtweg type vtweg,
 spart type spart,
 parvw type parvw,
 kunn2 type kunn2.
types: end of t_tab_knvp.
type-pools: slis.
*define data statments...
data: g_tab_edpar type standard table of t_tab_edpar,
 g_wa_edpar like line of g_tab_edpar.
data: g_tab_edpar1 type standard table of t_tab_edpar,
 g_wa_edpar1 like line of g_tab_edpar1.
data: g_tab_edpar2 type standard table of t_tab_edpar,
 g_wa_edpar2 like line of g_tab_edpar2.
data: g_tab_knvv type standard table of t_tab_knvv,
 g_wa_knvv like line of g_tab_knvv.
data: g_tab_knvp type standard table of t_tab_knvp,
 g_wa_knvp like line of g_tab_knvp.
data: repid like sy-repid,
 l_tab_fieldcat type slis_t_fieldcat_alv,
 l_tab_fieldcat1 type slis_t_fieldcat_alv,
 l_tab_fieldcat2 type slis_t_fieldcat_alv,
 layout type slis_layout_alv,
 events type slis_t_event,
 events1 type slis_t_event,
 wa_events like line of events,
 l_pos type i.
*selection screen...
selection-screen begin of block b1 with frame title text-001.
select-options: s_cust for knvv-kunnr obligatory,
 s_sorg for knvv-vkorg,
 s_dcha for knvv-vtweg,
 s_divi for knvv-spart,
 s_parf for knvp-parvw.
selection-screen end of block b1.
*start-of-selection...
perform get_data.
*to update the db table edpar...
perform update_edpar.
*display alv block...
perform alv_block.
*& Form get_data
 text
--> p1 text
<-- p2 text
form get_data .
select kunnr
 vkorg
 vtweg
 spart
 parvw
 kunn2
 from knvp
 into table g_tab_knvp
 where
 kunnr in s_cust
 and
 vkorg in s_sorg
 and
 vtweg in s_dcha
 and
 spart in s_divi
 and
 parvw in s_parf.
loop at g_tab_knvp into g_wa_knvp.
 move: g_wa_knvp-kunnr to g_wa_edpar-kunnr,
 g_wa_knvp-kunn2 to g_wa_edpar-inpnr,
 g_wa_knvp-parvw to g_wa_edpar-parvw.
 append g_wa_edpar to g_tab_edpar.
endloop.
if not g_tab_knvp[] is initial.
 select kunnr
 vkorg
 vtweg
 spart
 eikto
 from knvv
 into table g_tab_knvv
 for all entries in g_tab_knvp
 where
 kunnr eq g_tab_knvp-kunnr
 and
 vkorg eq g_tab_knvp-vkorg
 and
 vtweg eq g_tab_knvp-vtweg
 and
 spart eq g_tab_knvp-spart.
 loop at g_tab_knvp into g_wa_knvp .
 sort g_tab_knvv by kunnr.
 clear g_wa_knvv-eikto.
 read table g_tab_knvv into g_wa_knvv with key kunnr = g_wa_knvp-kunnr.
 if sy-subrc eq 0.
 move: g_wa_knvv-eikto to g_wa_edpar-expnr.
 modify g_tab_edpar from g_wa_edpar transporting expnr where kunnr eq g_wa_knvp-kunnr.
 endif.
 endloop.
endif.
sort g_tab_edpar by kunnr.
delete adjacent duplicates from g_tab_edpar comparing kunnr parvw.
endform. " get_data
*& Form update_edpar
 text
--> p1 text
<-- p2 text
form update_edpar .
delete from edpar." FROM TABLE g_tab_delete.
call function 'DB_COMMIT'.
loop at g_tab_edpar into g_wa_edpar.
 insert into edpar values g_wa_edpar.
 if sy-subrc eq 0.
 move-corresponding g_wa_edpar to g_wa_edpar1.
 append g_wa_edpar1 to g_tab_edpar1.
 else.
 move-corresponding g_wa_edpar to g_wa_edpar2.
 append g_wa_edpar2 to g_tab_edpar2.
 endif.
endloop.
reward points if helpful,
regards,
seshu.

Similar Messages

Which trigger to use for insert data into db table in Forms

Hi,
My form is current having a database block with table reference. When enter data into form field and click on save button. Automatically the record is inserted into database table.
I want to make this as manual insert. I changed the data block to a non-database. Where should i write the insert statement in order to insert data into table.
Is it Key-commit trigger at form level?
Please advise.
Thanks,
Yuvaraaj.

Hi Yuvaraaj.
Insert should happen when we click on the save which is inbuilt in the form. In this case where should i write the insert statement.Forms in built save commit's the form data where block is based on database not non database.
@2nd reply
Ypu are right. The reason i chnaged the database block to non-database is Currently i have a database block with form field canvas which insert only 1 record in to >table when we click on standard save button. The requirement was to add a field called CHANNEL which should have multiple values displayed. (i created this channel >field in a seperate datablock (non database) and used the same canvas.) When we insert data in all fields (single record) and channel we should be able to selected >multiple channel (say A,B and C) when we click on save then 3 records should be inserted in to the table which looping values for each channel. This was the actual >requirement and this is the reason why iam changing the block to non-database block.You are talking about two blocks.. 1. Master block and 2. Details block name channel
You are inserting one record in master block then insert 3 record name A,B,C for that master record.
Now you want master record should insert to each A,B,C record. Means
'how are you' --master record
and you want
'A'- 'how are you'
'B'- 'how are you'
'C'- 'how are you'OR
?Ok. If you want master record save in database and then want to save non-database(channel) data into database USE Post-Insert trigger at block level and do the rest.
Hope this helps...
Hamid
Mark correct/helpful to help others to get right answer(s).*
Edited by: HamidHelal on Jan 26, 2013 1:20 AM

How to use record type for inserting data into a table

I've read through the web the following tip:
"When working with a large number of columns, using variables of type RECORD is a better approach. With this approach, you do not have to list anything in the INSERT statement, because you are inserting a variable into the table that is defined as a row from the same table."
I usually define a variable as
r_mytable     mytable%ROWTYPE;
and inside my procedure I'll set the fields I need as
r_mytable.field1 := 1;
r_mytable.field3 := 7;
and then I perform the insert as
insert into mytable
(field1,
field3)
values
(r_mytable.field1,
r_mytable.field3);
According to the tip I've copied above, how can I use the TYPE RECORD of pl/sql for achieving the same result but perhaps in a smarter way?
Thanks in advance!

Hi,
Are you looking for this?
SQL> create table table1 (id number, descr varchar2(30));
Table created
SQL>
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 1;
5   my_rec.descr := 'TEST';
6   insert into table1 values my_rec;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    1 TESTWorks with UPDATE too :
SQL> DECLARE
2   my_rec table1%rowtype;
3 BEGIN
4   my_rec.id := 2;
5   my_rec.descr := 'TEST2';
6   update table1 set row = my_rec where id = 1;
7 END;
8 /
PL/SQL procedure successfully completed
SQL> select * from table1;
   ID DESCR
    2 TEST2

Using variables to insert data in the table

I want to insert datas in the table. I use constants,
all the constants are stored properly in the table. But,
when I use variables I get the error message
"Too few parameters. expected 6".
(I declared all the fields of the table as text only.)
My program is "newt.jsp"
<%@ page language="java" import="java.sql.*" %>
<html>
<head>
<title>storing customer information in the database</title>
</head>
<body>
<%
String cno1 = request.getParameter("cno");
String n1 = request.getParameter("n");
String add11 = request.getParameter("add1");
String add21 = request.getParameter("add2");
String phone1 = request.getParameter("phone");
String email1 = request.getParameter("email");
Connection con = null;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:customer"," "," ");
Statement statement1 = con.createStatement();
Statement statement2 = con.createStatement();
statement2.executeUpdate("create table cust1 (cno varchar(20),n varchar(20),add1 varchar(20),add2 varchar(20),phone varchar(20),email varchar(20))");
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values(cno1,n1,add11,add21,phone1,email1)");
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
catch(ClassNotFoundException cnfe) {
System.err.println(cnfe.getMessage());
catch(Exception e) {
System.err.println(e.getMessage());
finally {
 try {
 if(con!=null) {
 con.close();
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
%>
 
Mr./Ms. <%=n1 %> 
Your datas have been stored. 
</body>
</html>
Those who know answer please reply.
My thanks in advance.

I would expect your insert statement to be this:
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values('"+cno1+"','"+n1+"','"+add11+"','"+add21+"','"+phone1+"','"+email1+"')");
If you just create a string, it's not going to fill in variables into the string by magic.

Insert data from a table

Hi,
 
I would
like to insert data in a table. The data are selected by a query. I wrote this
code but there is an error :
 


PROCEDURE 
GLMASTER_SAVE 
IS


BEGIN


 INSERT 
INTO 
GLMASTER_SAVE


 
 
(COMPANY,
ACCT_UNIT, ACCOUNT,
SUB_ACCOUNT,
ACTIVE_STATUS)


 
VALUES


 
 
(SELECT
COMPANY,
ACCT_UNIT,
ACCOUNT,
SUB_ACCOUNT,
ACTIVE_STATUS

 
 
 
 FROM
GLMASTER

 
 ORDER
BY 
COMPANY,
ACCT_UNIT,
ACCOUNT,
SUB_ACCOUNT);


 
COMMIT;


END;

 
Do you
know why ?
 
Thank you
for your help.
 

Patrick

try this:
INSERT INTO GLMASTER_SAVE
 (COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT, ACTIVE_STATUS)
SELECT COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT, ACTIVE_STATUS
 FROM GLMASTER
 ORDER BY COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT;you need not to include the VALUES
Message was edited by:
Warren Tolentino
sorry ps while posting this you had already posted your solution.

Inserting Data into nested table

I am exploring the differences between OBJECT & RECORD.
As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
CREATE OR REPLACE type sam as OBJECT
v1 NUMBER,
v2 VARCHAR2(20 CHAR)
---Nested Table---
create or replace type t_sam as table of sam;
--Inserting data----
insert into table(t_sam) values(sam(10,'Dsouza'));
Error Message:
Error starting at line 22 in command:
insert into table(t_sam) values(sam(10,'Dsouza'))
Error at Command Line:22 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
*Cause:
*Action:

Ariean wrote:
So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
Ariean wrote:
And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
It could get stupidly .. er, stupid O_0
CREATE TYPE o_myobj1 AS object ( id1   number, cdate1 date );
CREATE TYPE t_mytype1 AS table of o_myobj1;
CREATE TYPE o_myobj2 AS object ( id2   number, dumb t_mytype1 );
CREATE TYPE t_dumber AS table of o_myobj2;
O_0
Ok, my brain's starting to hurt - I hope you get the idea
Ariean wrote:
Secondly is my understanding correct about OBJECT & RECORD?
I can't think of any benefit of describing it another way.

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

Insert data into linked table

Problem when you try to insert data into linked table.
I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
"Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
Error Unable to process update.
Is it bug too?

Hi,
Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
The following book contains an excellent introduction to this topic.
"Oracle PL/SQL for Dummies"
written by Rosenblum and Dorsey
published by Wiley Publishing Inc.
The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
"Oracle PL/SQL programming
written by Steven Feuerstein
published by O'Reilly
Hope this helps.
Cheers,
Patrick Cimolini

How to insert data in database table

Hi experts,
How to insert data into database table using internal table from function module.

Hi,
As per my understanding are you looking for the complete API feature of data insertion into the database using the Locking Mechanism? If yes, then you need to create a Lock Object using the Primary keys of the Primary Table and Secondary Tables. You need to call the lock object first and then you need to make the entry into the table. This principle is based on 'All or None Concept'.
For the insert Statement Key word you can have a look at the following link:
http://help.sap.com/abapdocu/en/ABAPINSERT_SOURCE.htm
Hope this helps.
Thanks,
Samantak.

Inserting data into multiple tables in jdbc

I am doing on file to jdbc. Now I got a requirement to insert data into multiple tables on the receiver side. How can I do this ?

Hi,
you are going to insert data into 4 tables in a sequence one after another , I see three options.
1) Stored procedure and 2) creating 4 statement data structure (one for each table)
The third option is writing a SQL with join for the 4 tables and use action command = SQL_DML. Example as follows....
Write SQL code and place it in access tag. Pass values for the columns using key tag...
<stmt>
 <Customers action="SQL_DML">
 <access> UPDATE Customers SET CompanyName=u2019$NAME$u2019, Address=u2019$ADDRESS$' WHERE CustomerID='$KEYFIELD$u2019
 </access>
 <key>
 <NAME>name</NAME>
 <ADDRESS>add </ADDRESS>
 <KEYFIELD>1</KEYFIELD>
 </key>
 </Customers>
</stmt>
Refer this http://help.sap.com/saphelp_nwpi71/helpdata/en/44/7b7855fde93673e10000000a114a6b/content.htm
Hope this helps ....

How to insert data from a table to database

Hi all,
My problem statement is that:
I have jsp page, which has a table with some columns editable for inserting data. I am using MySql database.
Now when I insert the data in the table and click submit button , the data entered must get stored in the database.
If its a single data I can do it , but how to do for mulitple rows or columns.
Please suggest me a solution
Regards,
Suraj

i did one program similar to this requirement. when the rows and columns are fixed then what is the problem.
use java script and capture all the values into an array and pass this to servlet and there call a method which will set
the bean objects. or else no need to pick the array directly pass all the parameters and set the beans by retrieving these
parameters(request.getParameter()).
Diablo

Need to insert data in 2 tables thro stored procedure

I need to create a stored procedure which will insert data in two tables. The procedure will get
its inputs from an Oracle Developer Form which will be inserted into the tables.
The 2 tables structure:
1.FEES_MASTER
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Primary Key
CS_ID NOT NULL NUMBER(8) -- Class Student ID; An enrolled student
REC_DATE NOT NULL DATE -- Fees receipt date
REC_AMOUNT NOT NULL NUMBER(6) -- Fees receipt amount
2.FEES_DETAIL
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Foreign Key
MONTH NOT NULL DATE -- First of each month to identify fee month
Scenario:
A student submits fees for 3 months through Master/Detail related blocks in a Developer Form as
Under:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
I need to check each fees detail record for fees month duplication as well before inserting new records.
How can this be achieved?
Thanks in advance.

<BLOCKQUOTE>quote:<HR>Originally posted by Fan Liu ([email protected]):
create primary key in the detail table. i think it's FEES_ID + MONTH. then mark the columns in Forms as primary key property true, then call check_record_uniqueness built-in in on-check-unique trigger.<HR></BLOCKQUOTE>
Thanks very much. But what I need is to ensure transaction integrity thro stored procedure. The system allows a certain CS_ID (i.e. Class Student ID, which is assigned a new one to every student annually) to submit fees for 12 months only, because a student stays in a class for a year. The 2 columns in the FEES_DETAIL table are composite primary key which only ensures that a certain FEES_ID will not be repeated for the same month. But suppose:
1)this data already exist in the tables:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
2)And this data is currently being inserted:
Fees Master
Fees ID : 11300
Class Student ID : 356
Receipt Date : 04-FEB-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11300 01-JAN-2001
11300 01-FEB-2001
11300 01-MAR-2001
The data in the 2nd condition is perfectly valid but the application can't allow a student to submit fees for a month which he has already submitted. Now only a stored procedure can make sure after checking that the same student doesn't pay fees for duplicate months. Another reason for my emphasis on stored procedure is that what if a user tries to insert data thro an SQL* Plus session instead of the Form.
PROBLEM: Now the problem I am having is I don't know how the procedure will take input for multiple records from the FEES_DETAIL block in the Form.
Please assist in this regard. Thanks.

Inserting data in a table wihout incrising column

I have three table in voucher saving .
1. header table
2. item table.
3. ac table
my problem is when any field incrises in a window(front end). I have to incrises the column in item table.
I am using procedure for insert data.
due to this mantaining very dificult and take time for saving.
any body know how to insert data without incrising column in a table ,solve this problem.
thanks in advance
regards
pravin

Like I said, it all comes down to the data model. It is almost always possible to build a data model that allows you to change the behavior of the system by modifying data rather than by issuing DDL, but as with any data modelling question, the devil is invariably in the details.
Without understanding the entities you are trying to model, the sort of flexibility you are trying to build in, the trade-offs (performance, code complexity, etc.) you are willing to make, there is no way to provide a step-by-step solution. It may require a small change to the data model, it may involve significant changes to the data model, it may involve retrofitting small amounts of code, it may involve recoding large modules.
Justin

Access issues while inserting data in a table in same schema

Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
Thanks in advance

Sonika wrote:
Hi All.
I have a script that at first creates and then populates a table. My script used to run fine in production environment till few hours back. But all of a sudden, it is popping up error while inserting data into the table .
Error message - "Insufficient Previlages".
Please suggest me what may be the reasons for this kind of error.
1) something changed
2) you are hitting a bug

Error while inserting data into a table.

Hi All,
I created a table.While inserting data into the table i am getting an error.Its telling "Create data Processing Function Module".Can any one help me regarding this?
Thanx in advance
anirudh

Hi Anirudh,
Seems there is already an entry in the Table with the same Primary Key.
INSERT Statement will give short dump if you try to insert data with same key.
Why dont you use MODIFY statement to achieve the same.
Reward points if this Helps.
Manish

Help for "insert data to variable tables"

Similar Messages

Maybe you are looking for