Inserting data in a table wihout incrising column

I have three table in voucher saving .
1. header table
2. item table.
3. ac table
my problem is when any field incrises in a window(front end). I have to incrises the column in item table.
I am using procedure for insert data.
due to this mantaining very dificult and take time for saving.
any body know how to insert data without incrising column in a table ,solve this problem.
thanks in advance
regards
pravin

Like I said, it all comes down to the data model. It is almost always possible to build a data model that allows you to change the behavior of the system by modifying data rather than by issuing DDL, but as with any data modelling question, the devil is invariably in the details.
Without understanding the entities you are trying to model, the sort of flexibility you are trying to build in, the trade-offs (performance, code complexity, etc.) you are willing to make, there is no way to provide a step-by-step solution. It may require a small change to the data model, it may involve significant changes to the data model, it may involve retrofitting small amounts of code, it may involve recoding large modules.
Justin

Similar Messages

Insert data into a table without identity column

Hi,
I need to insert data into a table using data flow task. Unfortunately this table's priamry key column (integer column) is not identity column. I am looking a way to get the primary key value for the new records. Please advice. Thanks

Phil has a great post on generating surrogate keys in SSIS: http://www.ssistalk.com/2007/02/20/generating-surrogate-keys/

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Inserting Data into nested table

I am exploring the differences between OBJECT & RECORD.
As i am still in process of learning, I found that both are structures which basically groups elements of different datatypes or columns of different datatypes, one is used in SQL and other is used in PL/SQL, please correct me if I am wrong in my understanding.
Below i am trying to insert data into an table of type object but i am unsuccessful can you please help.
CREATE OR REPLACE type sam as OBJECT
v1 NUMBER,
v2 VARCHAR2(20 CHAR)
---Nested Table---
create or replace type t_sam as table of sam;
--Inserting data----
insert into table(t_sam) values(sam(10,'Dsouza'));
Error Message:
Error starting at line 22 in command:
insert into table(t_sam) values(sam(10,'Dsouza'))
Error at Command Line:22 Column:13
Error report:
SQL Error: ORA-00903: invalid table name
00903. 00000 - "invalid table name"
*Cause:
*Action:

Ariean wrote:
So only purpose of equivalent SQL types concept of nested tables is to use them as one of the data types while defining an actual table?
Sort of - you can definitely use them for more than just "defining an actual table". (I'm fairly certain you could pass a nested table into a procedure, for example - try it, though - I'm not 100% sure on that - it just "makes sense". If you can define a type, you can use it, pass it around, whatever.).
Ariean wrote:
And that nested table could be a record in SQL or an Object in PLSQL or just simple datatype(number,varchar etc)?
Nested tables are just like any other custom data type. You can create a nested table of other data types. You can create a custom data type of nested tables.
It could get stupidly .. er, stupid O_0
CREATE TYPE o_myobj1 AS object ( id1   number, cdate1 date );
CREATE TYPE t_mytype1 AS table of o_myobj1;
CREATE TYPE o_myobj2 AS object ( id2   number, dumb t_mytype1 );
CREATE TYPE t_dumber AS table of o_myobj2;
O_0
Ok, my brain's starting to hurt - I hope you get the idea
Ariean wrote:
Secondly is my understanding correct about OBJECT & RECORD?
I can't think of any benefit of describing it another way.

Need to insert data in 2 tables thro stored procedure

I need to create a stored procedure which will insert data in two tables. The procedure will get
its inputs from an Oracle Developer Form which will be inserted into the tables.
The 2 tables structure:
1.FEES_MASTER
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Primary Key
CS_ID NOT NULL NUMBER(8) -- Class Student ID; An enrolled student
REC_DATE NOT NULL DATE -- Fees receipt date
REC_AMOUNT NOT NULL NUMBER(6) -- Fees receipt amount
2.FEES_DETAIL
Name Null? Type
FEES_ID NOT NULL NUMBER(8) -- Foreign Key
MONTH NOT NULL DATE -- First of each month to identify fee month
Scenario:
A student submits fees for 3 months through Master/Detail related blocks in a Developer Form as
Under:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
I need to check each fees detail record for fees month duplication as well before inserting new records.
How can this be achieved?
Thanks in advance.

<BLOCKQUOTE>quote:<HR>Originally posted by Fan Liu ([email protected]):
create primary key in the detail table. i think it's FEES_ID + MONTH. then mark the columns in Forms as primary key property true, then call check_record_uniqueness built-in in on-check-unique trigger.<HR></BLOCKQUOTE>
Thanks very much. But what I need is to ensure transaction integrity thro stored procedure. The system allows a certain CS_ID (i.e. Class Student ID, which is assigned a new one to every student annually) to submit fees for 12 months only, because a student stays in a class for a year. The 2 columns in the FEES_DETAIL table are composite primary key which only ensures that a certain FEES_ID will not be repeated for the same month. But suppose:
1)this data already exist in the tables:
Fees Master
Fees ID : 11002
Class Student ID : 356
Receipt Date : 06-JAN-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11002 01-JAN-2001
11002 01-FEB-2001
11002 01-MAR-2001
2)And this data is currently being inserted:
Fees Master
Fees ID : 11300
Class Student ID : 356
Receipt Date : 04-FEB-2001
Receipt Amount : 1500
Fees Detail
Fees ID Fees Month
11300 01-JAN-2001
11300 01-FEB-2001
11300 01-MAR-2001
The data in the 2nd condition is perfectly valid but the application can't allow a student to submit fees for a month which he has already submitted. Now only a stored procedure can make sure after checking that the same student doesn't pay fees for duplicate months. Another reason for my emphasis on stored procedure is that what if a user tries to insert data thro an SQL* Plus session instead of the Form.
PROBLEM: Now the problem I am having is I don't know how the procedure will take input for multiple records from the FEES_DETAIL block in the Form.
Please assist in this regard. Thanks.

Insert data into multiple tables

Hi all,
I've a requirement where i need to insert data into multiple tables using PL/SQL procedure
Procedure should have two parameters
1. Table Name (parameter1)
2. Data (parameter2)
Based on these two parameters i need to insert data into table (parameter1) using data (parameter2)
ex:
Procedure insert_data (p_table IN VARCHAR2
,p_data IN -- what should be the datatype?
IS
l_statement VARCHAR2(2000);
BEGIN
-- insert data into tables
INSERT INTO p_table
values (....);
END insert_data;Thanks in advance!!

BEDE wrote:
Amen to that!
So, I believe a better approach would be the following...
Suppose you have N datafiles with the same structure, and you wish to insert into the database the data from all those files.
For that, you should have a single table, named, say incoming_file_data, which should be structured more or less like below:
create table incoming_file_data (
filename varchar2(250) not null -- name of the file inserted from
,file_time timestamp -- timestamp when the data was inserted
,... -- the columns of meaningful data contained in the lines of those files
);And you will insert the data from all those files in this table, having normally one transaction for each file processed, for otherwise, when shit happens, some file may only get to be partially inserted into the table...
Maybe one good approach would be to create dynamically an external table for the file to be loaded, and then execute dynamically insert select into the table I said, so that you will have only one insert select for one file instead of using utl_file... RTM on that.If the file structures are the same, and it's just the filename that's changing, I would have a single external table definition, and use the alter table ... location ... statement (through execute immediate) to change the filename(s) as appropriate before querying the data. Of course that's not scalable if there are multiple users intenting to use this, but generally when we talk about importing multiple files, it's a one-user/one-off/once-a-day type of scenario, so multi-user isn't a consideration.

Insert data into nested tables

Hi,
Can someone please advice how can I insert data into nested tables using APEX.
I have a table "employee" and a column addresses of type address_table_type object which has address1, address2, address3 columns. I want to create form in APEX that will collect address1, address2, address3. I wonder how to do this? should the item be based in database item? if yes then how can I point to the column of address_table_type
Thanks
--Aali

Can you post your tabB type, sample data, and your exact insert statement?
Is it overwriting or not commiting the inserts?
Have you traced your session to see what is happening?

Insert data into fact table from source database tables

here i try to insert data into fact table from source database tables here is the query
ALTER procedure [dbo].[facttable]
as
insert into [pp dw].dbo.Dimfact(Prod_ID,Production_ID,Material_ID,Equip_ID,WC_ID,Recipe_ID,Quantity,costprice)
select Products.[Product ID],[Production ID],Materials.[Material ID],[Equipment ID],[Work Centre ID],[Recipy ID],Quantity,[cost price]
from
[PRODUCTION PLANNING 2].dbo.[Products],
[PRODUCTION PLANNING 2].dbo.[Production Detail],
[PRODUCTION PLANNING 2].dbo.[Material category],
[PRODUCTION PLANNING 2].dbo.[Materials],
[PRODUCTION PLANNING 2].dbo.[Equipment],
[PRODUCTION PLANNING 2].dbo.[Working Centre] ,
[PRODUCTION PLANNING 2].dbo.[Recipies]
where
Products.[Product ID] in (13, 14, 15, 16, 17) and
[Production Detail].[Production ID] in (1, 2, 3) and
[Materials].[Material ID] in (1, 2, 3, 4, 5) and
[Equipment].[Equipment ID] in (1, 2, 3, 4) and
[Working Centre].[Work Centre ID] in (1, 2, 3) and
[Recipies].[Recipy ID] in (1, 2, 3) and
[Material category].[Category ID] in (8, 9, 10, 11, 12, 13)
and when i execute query it shows me error
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Dimfact_Dimproduct". The conflict occurred in database "pp dw", table "dbo.Dimproduct", column 'Prod_ID'.
ERD IS
HOW TO SOLVE THIS PROBLEM?

I cant see any join conditions in your query posted. Whats the purpose of the query above. It will just bring you a cartesian product (cross join) of tables involved subjected to filters. Are you sure this is the correct query?
The error you're getting may be because you've not yet populated DimProduct or may be because of logic you used in popultaing DimProduct causing it to miss some records which is what query is referring to in above case.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Insert data into linked table

Problem when you try to insert data into linked table.
I made the view with all linked table columns (field1 is PK, field2, field3......) plus new primary key field "field1_PK" for tabular form wizard primary key field definition. After submit data on tabular form appears:
"Error in mru internal routine:ORA-2001:Error in MRU: row=1,ORA-00957: duplicate column name ORA-02063:preciding line from "SHEMA_NAME", insert into "field1","field1_PK","field3",........) values (:b1,:b2,:b3.........)
Error Unable to process update.
Is it bug too?

Hi,
Have you tried to do your updates using an INSTEAD OF TRIGGER on your view? An INSTEAD OF TRIGGER allows you to update a non-updateable view.
The following book contains an excellent introduction to this topic.
"Oracle PL/SQL for Dummies"
written by Rosenblum and Dorsey
published by Wiley Publishing Inc.
The following book is also excellant reference that deals with INSTEAD OF TRIGGERS.
"Oracle PL/SQL programming
written by Steven Feuerstein
published by O'Reilly
Hope this helps.
Cheers,
Patrick Cimolini

Inserting data into multiple tables in jdbc

I am doing on file to jdbc. Now I got a requirement to insert data into multiple tables on the receiver side. How can I do this ?

Hi,
you are going to insert data into 4 tables in a sequence one after another , I see three options.
1) Stored procedure and 2) creating 4 statement data structure (one for each table)
The third option is writing a SQL with join for the 4 tables and use action command = SQL_DML. Example as follows....
Write SQL code and place it in access tag. Pass values for the columns using key tag...
<stmt>
 <Customers action="SQL_DML">
 <access> UPDATE Customers SET CompanyName=u2019$NAME$u2019, Address=u2019$ADDRESS$' WHERE CustomerID='$KEYFIELD$u2019
 </access>
 <key>
 <NAME>name</NAME>
 <ADDRESS>add </ADDRESS>
 <KEYFIELD>1</KEYFIELD>
 </key>
 </Customers>
</stmt>
Refer this http://help.sap.com/saphelp_nwpi71/helpdata/en/44/7b7855fde93673e10000000a114a6b/content.htm
Hope this helps ....

How to insert data into two tables linke with foreign key..

I have two tables
1)EMP(emp_ID,username,emp_type_code)
emp_ID is primary key, emp_type_code is a foreign key references emptype table.
2)emptype(emp_type_code,emp_type_descripton)
emp_type_code is primary key
Could anyone help me ..how to insert data into EMP table. How to insert data into two tables linke with foreign key..

CREATE TABLE "CATDB"."DWDIMUSER"
"USER_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_ID" NUMBER(10,0),
"FULLNAME" VARCHAR2(20 BYTE),
"FNAME" VARCHAR2(20 BYTE),
"LNAME" VARCHAR2(20 BYTE),
"USER_SUBTYPE" VARCHAR2(20 BYTE),
CONSTRAINT "DIMUSER_PK" PRIMARY KEY ("USER_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE,
CONSTRAINT "DIMUSER_DIMSPECIALTY_FK" FOREIGN KEY ("SPECIALTY_ID") REFERENCES "CATDB"."DWDIMSPECIALTY" ("SPECIALTY_ID") DISABLE
CREATE TABLE "CATDB"."DIMSPECIALTY"
"SPECIALTY_ID" NUMBER(10,0) NOT NULL ENABLE,
"SPECIALTY_NAME" VARCHAR2(100 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("SPECIALTY_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
INSERT INTO DIMUSER (FullName, FNAME, LNAME, USER_TYPE, USER_SUBTYPE)
SELECT DISTINCT
Engineer AS FullName,
regexp_substr(Engineer , '[^,| ]+', 1, 1) as FName,
regexp_substr(Engineer , '[^,| ]+', 1, 2) as LName ,
'Engineer'
FROM EMPLOYEELOOKUP;
INSERT INTO DIMSPECIALTY (SPECIALTY_NAME)
SELECT DISTINCT SPECIALITY
FROM EMPLOYEELOOKUP;
COMMIT;
CREATE TABLE employeelookup ...IS A TABLE THAT HAS ALL THE DATA NEDED TO BE FILLED IN BOTHE TABLES...
CREATE TABLE "CATDB"."EMPLOYEELOOKUP"
"EMPLOYEELOOKUP_ID" NUMBER(10,0) NOT NULL ENABLE,
"ENGINEER" VARCHAR2(25 BYTE),
"SPECIALTY" VARCHAR2(20 BYTE),
CONSTRAINT "DIMSPECIALTY_PK" PRIMARY KEY ("EMPLOYEELOOKUP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "CATDB" ENABLE
DATA IN EMPLOYEELOOKUP
Engineer, Specialty,
John, Dow, Electronis,
Dow, Jons, Technician
Stan Smithers Sales
Mark, Richards Marketing
Jenny, Lane Marketing
John, Lee Sales
I NEED TO LOAD THE FOREIGN KEY IN DIMUSER FROM THE DIMSPECIALTY TABLE?
BY USING THE LOOKUP TABLE TO MARCH THE NAMES UNDER THE Engineer COLUMN, SPECIALTY COLUMNE DISTICTIVLY BY JOINING THE DIMSPECILTY TO RISTIVE THE PRIMARY KEY AND FILL IT IN THE DIMUSER TABLE AS A FOREIGNE KEY.

Using variables to insert data in the table

I want to insert datas in the table. I use constants,
all the constants are stored properly in the table. But,
when I use variables I get the error message
"Too few parameters. expected 6".
(I declared all the fields of the table as text only.)
My program is "newt.jsp"
<%@ page language="java" import="java.sql.*" %>
<html>
<head>
<title>storing customer information in the database</title>
</head>
<body>
<%
String cno1 = request.getParameter("cno");
String n1 = request.getParameter("n");
String add11 = request.getParameter("add1");
String add21 = request.getParameter("add2");
String phone1 = request.getParameter("phone");
String email1 = request.getParameter("email");
Connection con = null;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection("jdbc:odbc:customer"," "," ");
Statement statement1 = con.createStatement();
Statement statement2 = con.createStatement();
statement2.executeUpdate("create table cust1 (cno varchar(20),n varchar(20),add1 varchar(20),add2 varchar(20),phone varchar(20),email varchar(20))");
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values(cno1,n1,add11,add21,phone1,email1)");
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
catch(ClassNotFoundException cnfe) {
System.err.println(cnfe.getMessage());
catch(Exception e) {
System.err.println(e.getMessage());
finally {
 try {
 if(con!=null) {
 con.close();
catch(SQLException sqle) {
System.err.println(sqle.getMessage());
%>
 
Mr./Ms. <%=n1 %> 
Your datas have been stored. 
</body>
</html>
Those who know answer please reply.
My thanks in advance.

I would expect your insert statement to be this:
statement1.executeUpdate("insert into cust1 (cno,n,add1,add2,phone,email) values('"+cno1+"','"+n1+"','"+add11+"','"+add21+"','"+phone1+"','"+email1+"')");
If you just create a string, it's not going to fill in variables into the string by magic.

How to insert data into a table from an xml document

using the XmlSql Utility, how do I insert data into a table from an xml document, using the sqlplus prompt.
if i use the xmlgen.insertXML(....)
requires a CLOB file, which i dont have, only the xml doc.
Cant i insert directly from the doc to the table?
the xmlgen examples I have seen first convert a table to a CLOB xmlString and then insert it into another table.
Isnt there any other way?

Your question is little perplexing.
If you're using XML SQL Utility from
the commandline, just use putXML.
java OracleXML putXML
null

In ADF how can i insert data in multiple table if they have foreign key

I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
Thnak you very much.

Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please?

Insert data from a table

Hi,
 
I would
like to insert data in a table. The data are selected by a query. I wrote this
code but there is an error :
 


PROCEDURE 
GLMASTER_SAVE 
IS


BEGIN


 INSERT 
INTO 
GLMASTER_SAVE


 
 
(COMPANY,
ACCT_UNIT, ACCOUNT,
SUB_ACCOUNT,
ACTIVE_STATUS)


 
VALUES


 
 
(SELECT
COMPANY,
ACCT_UNIT,
ACCOUNT,
SUB_ACCOUNT,
ACTIVE_STATUS

 
 
 
 FROM
GLMASTER

 
 ORDER
BY 
COMPANY,
ACCT_UNIT,
ACCOUNT,
SUB_ACCOUNT);


 
COMMIT;


END;

 
Do you
know why ?
 
Thank you
for your help.
 

Patrick

try this:
INSERT INTO GLMASTER_SAVE
 (COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT, ACTIVE_STATUS)
SELECT COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT, ACTIVE_STATUS
 FROM GLMASTER
 ORDER BY COMPANY, ACCT_UNIT, ACCOUNT, SUB_ACCOUNT;you need not to include the VALUES
Message was edited by:
Warren Tolentino
sorry ps while posting this you had already posted your solution.

Inserting data in a table wihout incrising column

Similar Messages

Maybe you are looking for