Help! How do I add my name to the Heilman/Jung/McWeeney/Hermann Hands-On?

In his blog here:
SDN Community Day Mentor Hands-On Workshop
Thomas says:
If you are already signed up to attend community day, then you just need to add your name to this wiki page:
https://wiki.sdn.sap.com/wiki/display/Community/SDNDayLasVegas2008
I went there and didn't see any instructions for adding my name to each of the four sessions.
Do I just edit the child page for each session and add my name at the bottom?
If not, what to do ?????????
I don't want to get shut out of these sessions, so please advise at your earliest convenience !
Thanks
djh

Thanks, Thomas.  Ed already said the same thing in Mentor Forum.
I thought "Participants" were like the folks who sit in the front - you know like discussion leaders who help out the actual presenters.
Maybe "Attendees" would be a less ambigious title.
Thanks again.
djh

Similar Messages

  • How do I add my name to the camera data file in meta data?

    When reviewing the meta data on my photos I see the camera model number, serial number, focal length, etc.  The camera owner field is blank.  How do I add my name to the camera owner field?
    I'm using Photoshop CC, on a windows 8.1 Pro platform.  Any help would be greatly appreciated.
    Caitlin

    I did add all the info on the menu section you mentioned above.  Unfortunately it does not show up as "Owner" when you view the data file in Photoshop CC for some reason. Copyright info shows properly, but not camera owner.  It's not a big problem anyway, just a pride of ownership thingy .  I downloaded the GeoSetter program, and after reviewing the meta data contained there I don't see an option for "owner" there either.  Perhaps its something that Adobe plans to implement someday, who knows. Thanks for your suggestions everyone.
    This is my first DSLR, all I have shot in the past have been film cameras and we didn't have any of this fancy info available unless we wrote it down somewhere, smile.  I was still using my old Nikomat that I purchased in 1972 when I was stationed in Japan. I was a bit stubborn when it came to switching to DSLR sorry I waited so long now.
    Oh, Trevor, sorry to learn you may be using something other than Nikon, I didn't know there was another brand other than Nikon!
    Caitlin

  • How do I add Album name to the Album field in Home Videos?

    With the new iTunes, I cannot figure out how to add the album name to the Album field.  Any suggestions?

    New problem,  New computer, I can't download iTunes with IE 11.  It thanks me for downloading, but it's not on my computer nor do I get a run save pop up?  Any suggestions.
    You're up late for the UK.

  • I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library from all of my devices?

    I would like to set up my email on the apple tv as well as have my husband's email on there so we can view both sets of photos and videos - it is already set up in his name - how do i add my name so as to view my photo library and songs from MY phone ?

    this is not a reply - i asked the question - still trying to learn how all this works - someone please HELP ME

  • How do I add place names to events in iPhoto 11

    How do I add place names to events iPhoto 11 version 9.2.1, I can do a single picture at a time but when you have a 100 or so it's going to get tedius.
    I have found messages  via google that tell me how to do it but it dos'nt work.
    I select the event I want to locate. then I  click "cmd i" to get the info screen up. Then at the bottom of the screen is a picture of the world and a box next to it where I think you should type in your location, but that just takes me to a map of the USA and I can't do anything.
    Help please, what am I doing wrong.

    Same problem here. Cannot understand why it is soooo difficult...

  • Pls help - How can I add a typekit font to muse?

    As Muse doesn't come with all typekit fonts already included in the dropdown list of webfonts, I'd like to know how I can add a typekit font to the dropdown menu so I can use it for my website. I have Adobe creative cloud membership.
    I've searched the whole of the web and can't find anything about this at all - only about adding one of the existing muse typekit fonts which I already know how to do.
    Why doesn't Adobe include all typekit fonts with Muse when you're already a full creative cloud subscriber?

    Done!
    Date: Thu, 20 Dec 2012 03:13:17 -0700
    From: [email protected]
    To: [email protected]
    Subject: Pls help - How can I add a typekit font to muse?
        Re: Pls help - How can I add a typekit font to muse?
        created by morgan_in_london in Help with using Adobe Muse - View the full discussion
    You're very welcome - can I be cheeky and ask for a "correct answer" to be noted? :^D
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4935814#4935814
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4935814#4935814
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4935814#4935814. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Itunes wi-fi sync; how do I add a name for my new computer on the ipad 4?

    RE: itunes wi-fi sync;
    How do I add a name for my new macbook pro computer on the ipad 4?

    You cannot add a name for Mac on the iPad. I assume that you mean in the WiFi sync setting - not possible.

  • I need help, How could I add Aliases to Local Administrator account via terminal commands???

    I need help, How could I add Aliases to Local Administrator account via terminal commands???
    I want to use commands to add alias for existing administrator account remotly by using ARD.
    Thanks.

    Hi,
    a Windows Domain Controller does not have any local user or groups. So you might add the user to the admin group at Domain level.
    B RGDS,
    Gregor
    Edited by: Gregor Gasper on Jan 9, 2009 1:44 PM

  • How do you add Authors name in iBooks?

    When I save my iBook to iTunes it shows as Author Unknown. I can't seem to find where you would add a name.

    Onnie - The place to add Author is in iTunes Producer during the publish phase.
    In iTunes Producer go to Book then click on the Authors button along the bottom.
    This is were Authors and many other types of producers may be entered.
    - Fabe

  • How do I add a contact from the same company to my address book?

    How do I add a contact from the same company to my address book? I do not want to re-type all of the information. Thanks for your help.

    Any card in your address book can be duplicated. Select the card within the Name column, and use the Edit > Copy menu item followed by the Edit > Paste menu item. Then you can update the card copy and only change the name/email/phone fields as needed.

  • How do we add trap-recipients to the acl file?

    How do we add trap-recipients to the acl file?
    Any examples.

    Here's some documentation I am working on for my place of work - hope this helps:
    There are two Sun-provided configuration files of note that must be maintained and provided to the SNMP agent program as command line arguments when it runs. They are:
    X.acl (subagent access control file, where X is your agent name)
    X.reg (subagent registration file, where X is your agent name)
    Note: For more information on either of these files, read the Solstice Enterprise Agents User Guide found on the Sun website, but don't expect too much.
    The reg file specifies the subagent name and OID tree it is responsible for, among other things.
    The acl file contains a list of communities that will be sent traps. This file will need to be periodically updated with the IP addresses of any entity that wants to receive traps from the X subagent. The file looks in part like this:
    acl = {
    communities = public, private
    access = read-write
    managers = dv, localhost
    trap = {                                                             
    trap-community = SNMP-trap
    hosts = dv, localhost
    enterprise="Xenterprise"
    trap-num = 1-5
    Where "dv" and "localhost" are configured in the /etc/hosts file as IP addresses to send traps to and "Xenterprise" is an enterprise that must be registered EXACTLY as is shown in the /etc/snmp/conf/enterprises.oid file. (Note: Some of the enterprises in this file have spaces within their name. This WILL NOT WORK. So if for some reason, an enterprise you were going to use is "MY Enterprise" you must changes this file because your MIB will not compile with an enterprise with spaces in the TRAP-TYPE declaration.
    So, to add a new community, add an argument to the "managers" and "hosts" line in the .acl file and ensure that this reference has its IP address listed in the /etc/hosts file.
    Furthermore, in /etc/snmp/conf/snmpdx.acl a comparable entry needs to be added as well. The snmpdx executable is the master agent that the subagent communicates with. It also has an entry in its .acl file as follows:
    trap = {                                                            
    trap-community = SNMP-trap
    hosts = dv, localhost
    enterprise="Xenterprise"
    trap-num = 1-5

  • How do I add web part in the event receiver after the site is provisioned in SP 2010?

    How do I add web part in the event receiver after the site is provisioned in SP 2010?

    You try the below steps:
    1. Use long operation to provision the site, so that it does not time out in process.
    2. After provisioning, you can add a page or add the web part directly to landing page of site.
    For each of the above steps you can find the sample code pieces.
    if you couldn't get that, let me know. I will share with you.
    Thanks, Ashish If my response has helped you, please mark as answer.

  • How do I add a signature to the bottom of a photo?

    How do I add a signature to the bottom of the photo?
    I have created a signature, but it centers in the photo and I need to just professionally sign my photos with small area to the bottom right of my pictures.   HELP!!

    Hello, wecome to the forums! the easiest is to use the watermark panel that Russell Brown made: scroll down or search for Watermark on http://www.russellbrown.com/scripts.html
    You will find a script, and a video that explains how to use it.
    If you want to do it yourself, crate an action where you will use the layer>align>... Menu entries to place your signature where you want it.
    Hope this helps!

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • How can I add a contact on the calendar for an event

    How can I add a contact on the calendar for an event

    It is between Repeat and Alert on my iPhone 5 with iOS 6.0.1
    I used the + on the top right to add the event and when you look vertically starting with the name, followed by location and then time the rest of the default things includ Invitees, among other items. 

Maybe you are looking for