HELP! How to build a table with loop

Hi,
I have a problem with "loop for".
When I used one Loop For, it's ok.
I can build a tab with register but with 2 loop For, I can't. Why ?
You can see my example for understand my question.
Thank's a lot if you have a answer.
Attachments:
Help_build_tab.vi ‏47 KB

Here is the solution, I think that you are looking for.
-Jim
Attachments:
Help_build_tab.vi ‏35 KB

Similar Messages

How to build a table with two For Loop

Hi,
I have two Loop For and I want to build a table with N columm (N = a loop + b loop)
You can see my example.
Thank's a lot
Attachments:
help_table.zip ‏10 KB

I think this is the solution that you are going for.
-Jim
Attachments:
help_table.vi ‏26 KB

How to build a table with predifined? Like Huffman decoding, there are 34 predefined tables?

I am trying to use Labview for mp3 huffman decoding. there are 34 predefined tables for lookup purpose. I tried build array control, but it is so hard to assign value with size of 16. What is the better way to create predefined array? And how to do lookup table with Labview?

IMHO, the best way to have something "predefined" is to read this data from a "setup/configuration" file (if you don't want to use "default settings" LV feature). The choice of the format for all the data that you want to store in some kind of configuration file is up to you.
Also, constructing a "lookup table" in LV doesn't seems different as for any other programming language.

How can I build a table with the time values of a timer from a while loop

Hi:
I have a question concerning building a table:
Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
0msec         1V
100msec     2V
200msec     3V
300msec     4V
etc.
If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
Can I also save the table to a file or even to an Excelsheet? How can I do that?
Thanks for your help!

Hi Craig:
thank you very much. To solve the mystery : ) :
I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
Thank you very much!
Steffi
Attachments:
motor.vi ‏238 KB
sensor.vi ‏59 KB

How to automatically build a table with 2 alternated font colors for the lines ?

Hi,
I'm looking for a way to automatically build a table with alternate background color and alternate font color for the lines.
I have this particular project (a list of companies of an industrial area) and it is updated twice a year :
I managed to set an automated alternate background color of the lines so this works well (white/blue/white/blue...)
But the font color does not automatically alternates... and I do not know how to set this up...
All the companies are ordered alphabetically so when I have to insert or delete one, the whole text of the table under the modified line is messed up. Then I have unreadable white text on white background and blue text on blue background...
Does anyone have an idea on how to automatically alternate the font color ?
Thank you.
Best regards,
G.

Hi,
I know this [JS] code is awful but it works. If someone wants to correct it …!
At the beginning, you have an Excel file. You play a little with it [doing concatenations] to get, after importing it in ID:
Then, just run the .jsx:
Done!

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How to insert a table with variable rows in smart form

Hi all,
How to insert a table with variable rows in smart form?
Any help would be appreciated.
Regards,
Mahesh.

Hi,
Right click the mouse->create->table
If you want 5 columns, you need to declare 5 cells in one line type of the table
Click on Table -> Details, then do the following
Line Type 1 2 3 4 5
L1 2mm 3mm etc
Here specify the width of the columns as many as you want..
then in the header/main area of the table, click create Table Line, Rowtype is L1, automatically 5 cells will come,In each cell create a text element, display the variable to be printed there.

How to get the table with no. of records after filter in webdynpro

Dear Gurus,
How to get the table with no. of records after filter in webdynpro?
Thanks in advance.
Sankar

Hello Sankar,
Please explain your requirement clearly so that we can help you easily.
To get the table records from your context node use method get_static_attributes_table()
data lo_nd_mynode type ref to if_wd_context_node.
data lt_atrributes_table type wd_this->elements_mynode.
lo_nd_mynode = wd_context->get_child_node( name = wd_this->wdctx_mynode ).
lo_nd_mynode->get_static_attributes_table( importing table = lt_atrributes_table ).
Note: You should have already defined your context node as a Dictionary Structure.
BR,
RAM

How to fill internal table with selection screen field.

Hi all,
i am new to sap . pls tell me how to fill internal table with selection screen field.

Hi,
Please see the example below:-
I have used both select-options and parameter on the selection-screen.
Understand the same.
* type declaration
TYPES: BEGIN OF t_matnr,
        matnr TYPE matnr,
       END OF t_matnr,
       BEGIN OF t_vbeln,
         vbeln TYPE vbeln,
       END OF t_vbeln.
* internal table declaration
DATA : it_mara TYPE STANDARD TABLE OF t_matnr,
       it_vbeln TYPE STANDARD TABLE OF t_vbeln.
* workarea declaration
DATA : wa_mara TYPE t_matnr,
       wa_vbeln TYPE t_vbeln.
* selection-screen field
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS : p_matnr TYPE matnr.
SELECT-OPTIONS : s_vbeln FOR wa_vbeln-vbeln.
SELECTION-SCREEN: END OF BLOCK b1.
START-OF-SELECTION.
* I am adding parameter value to my internal table
wa_mara-matnr = p_matnr.
APPEND wa_mara TO it_mara.
* I am adding select-options value to an internal table
LOOP AT s_vbeln.
    wa_vbeln-vbeln = s_vbeln-low.
    APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
Regards,
Ankur Parab

How to have a table with table headers eventhough table is into Scrollpane?

How to have a table with table headers eventhough the table is placed in the scrollpane?
This is because when i place my jtable into the scrollpane the table headers aren't showed.
I have read that i need to override:
configureEnclosingScrollPane() from jtable.....and with:
JViewport viewport = scrollPane.getViewport();
viewport.getView()
i think that i can reach it....but i don't know how to integrate it...to reach to have my jtable into a jscrollpane wiht the same headers of my jtable......
Could somebody help me please?......
Thanks,
Mary

How to have a table with table headers eventhough the table is placed in the scrollpane?
This is because when i place my jtable into the scrollpane the table headers aren't showed.
I have read that i need to override:
configureEnclosingScrollPane() from jtable.....and with:
JViewport viewport = scrollPane.getViewport();
viewport.getView()
i think that i can reach it....but i don't know how to integrate it...to reach to have my jtable into a jscrollpane wiht the same headers of my jtable......
Could somebody help me please?......
Thanks,
Mary

How i can create table with data

How i can create table with data from dev to production?

How i can create table with data
[url=http://en.wikipedia.org/wiki/Black_Beast_of_Aa
aaarrrrrrggghhh]from dev to production?
[url=http://img2.travelblog.org/Photos/3800/14977/t
/64816-Col-Kurtz-0.jpg]The horror, the
horror.lol, you gonna scare somebody here.
Are we helping devil?

How to create a table with events in smartforms?

How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)

Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements.

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

HELP! How to build a table with loop

Similar Messages

Maybe you are looking for