Help! how to create a repository correctly of owb?

I have installed oracle11 in the directory c:\app\***\product\11.1.0\db_1 and installed owb in the directory c:\app\***\product\11.1.0\owb11gr1. When i tried to Create a Repository Using the Repository Assistant, the system gives out an error message:OWBSYS is not granted access to owb home/owb/bin/admin/rtrepos.properties:Please run UnifiedRepos/reset_owbcc_home.sql specifiying the path of the Oracle Home from which the Control Center Service is being run.
Then I run the script reset_owbcc_home.sql and put in "C:/app/***/product/11.1.0/owb11gr1" according to the prompt.
But it still can not work, it gives out another error,"there is no table or views"
Can anyone tell me how to create a repository correctly?
Thanks!

With your database 11g install OWB is already installed under the ORACLE_HOME's owb directory. You should/could have just used it.
I'd suggest a cleanout and start again, here are the steps:
1. Close any open OWB
2. from db home,
Stop runtime service - cd owb/rtp/sql sqlplus OWBSYS/OWBSYS @stop_service
3. drop your target user, design user
4. cleanout OWBSYS, recreate:
cd owb/UnifiedRepos
sqlplus using your sysdba
@clean_owbsys
@cat_owb <tablespace_of_your_choice)
Now run reposinst.bat from your database Oracle home
Cheers
David

Similar Messages

How to Create a repository in KM?

Hi All,
My Queries:
1)How to create a repository in KM(for storing images)?
2)How to Create a task in a UWL when an image is copied in the KM repository?
This is needed in my I2P(Invoice to Pay) process scenario.
Please help!
Reply soon!
Sumit

Sumit,
Are you referring to the subscription feature for KM.
You should have a mail transport created for this purpose.
Also have mailing, notification active and channel originators set up.
Pls try this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/10083f56e4d861e10000000a114084/content.htm
Regards
Vineeth

How to create a repository for data archiving?

We have a content server installed 2 months ago.
We want to store the archived data either into the content server DB (even we know it's NOT
recommended) or better into the file system on the content server.
Could you help tell how to create the repository to hold the archived data in above 2 scenarios?
Thanks a lot!

content server DB (even we know it's NOT recommended)
I have use Content Server with MaxDB in more than 1 ocation without any issues.
You need to set up the repositories in OAC0.
Read,
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/cefa3882cd8229e10000000a11402f/frameset.htm
Regards
Juan

How to create a repository(not just custom) using your hard drive

I don't know if many people know about this, so I am giving this a shot. There are three major articles on wiki.archlinux.org: Custom local repository,
Using a CD-ROM as a repository, and Offline Installation of Packages. These are available online through the WIKIs at archlinux.org.
I was first confused because when I was reading "Offline installation of packages", I didn't know what these ".db.tar.gz" files where. I came mainly from a Debian / Ubuntu
background (I actually tried many distros before this), so getting used to the way the repository works and no graphical install manager for it. However, I enjoyed a challenge and
I found out that these are database packages that contain descriptions and locations on where these files are located. The ones on the ftp server are already compiled. I don't know if,
however they are compiled with the most recent versions.
With all that said, I thought you had to have it all in one directory in order for this to work, but as it turns out, location is not really an issue. I decided to have a directory reside on the root.
I chose root because it's only for the install of my own packages. I could have done it as a seperate user account, such as "repos" in PCLinuxOS (another distro I tried). I didn't want to have a seperate account for this. Therefore, I created "/root/repository". Within this directory I created directories for all repository archives. I basically did a "cd /mnt/dvd" and migrated to the particular repository directories. I would copy all the "pkg.tar.gz" files into their respective directories with "cp * ~/repository/<name-of-dir>". For intance, I started with the "core" directory, because there was some things I didn't install in the core directory during installation and if the packages needed it, it was there. This follows for the rest of the directories, such as "community", "testing", and "unstable", etc.You can go to the ftp mirrors to find out what directories are available. The main point is that your files should be in the format ".pkg.tar.gz". These are package files that get converted into a sort of database format that as I mentioned, informs the system the description and where the files are located, and so on.
The command to perform this, is "tar -xvf /root/repository/core/core.db.tar.gz *.pkg.tar.gz". You can replace core with whatever repository you are adding. So, for example, "extra.db.tar.gz" would be in the "extra" directory. This information is located in the "Offline installation of packages". The command to create this database is called, "repo-add".
The format for this command is "repo-add /path/to/dir.db.tar.gz *.pkg.tar.gz". So, if it's the core packages you would "cd ~/repository/core" and "repo-add core.db.tar.gz *.pkg.tar.gz".
Then, you need to edit the "/etc/pacman.conf" configuration file for pacman. I basically would comment all out except for the repositories I need. So, for example "[core]" and "/etc/pacman.d/core" would tell where normally the servers are located for these files. This information is located int the "Custom local repository" article.using the "repo-add" command.
Furthermore, I edited each server file located in "/etc/pacman.d/<repository>" where repository is core, extra, etc. I would perform, "nano /etc/pacman.d/core" for example and comment out all servers. I then add a "local repository" by typing in "file:///root/repository/core", saved it, and then did a "pacman -Sy" to update the repository database. Now, I can do "pacman -S <package-name>" where package-name is whatever I wanted to install. Voila! Please let me know of any suggestions, questions, insights, or comments. I hope I'm not missing anything in this article. I do remember using "rm -rf * in the "/var/lib/pacman/<repository>"directories and using "tar xvf <repository>.db.tar.gz". I don't if that something to do with it, though. Be careful with the "rm -rf *" command, because you can erase your hard drive if you are not careful, for those who aren't informed.
P.S. Please note all these are done with the root user.

pressh wrote:
gradgrind wrote:
smitty wrote:pressh, I understand and appreciate your point of view... well taken! Are you implying that I should have written in steps, such as 1, 2, and 3? Also, should I have got ridden of the redundant information if it is contained in the Wiki article and / or taken out the commands on how to apply them and left only with the explanation? Is this what you imply? Sorry if I seem redundant with these questions, but I'm curious so I can improve for the future. I am new to this and open to any suggestion and comments.
Maybe you could either edit the existing wiki pages where they were not clear to you, or else add a new wiki page, or both. Certainly give the whole a clearer (visual) structure, and (if they don't already exist) add links between the connected wiki pages.
Yes that is partly what I mean. Further you could get rid of the information that is not really needed to follow the guide (for example what the command 'repo-add' does. People could if they are interested look it up in the script itself, or you could add it here and link to it).
And yes a bit of structure would be nice. You don't have to nessesarily call it 1,2,3, as long as it has some kind of structure in it (the visual point is very important here). You could take a look at existing wiki pages on the web and see how most of them (not all of them are good of course) are structured.
That's a good point, too. How do I found out what articles are more effective? I am doing research on this particular matter at the moment and came across articles that have tips on technical writing. Could this help in the long run? Or, is it better to get feedback from other users and improve that way? In other words, do first, and ask later, as one user point out?

How to create obiee repository in solaris

hi,
I am trying to create obiee repository in obiee under solaris environments. i have find out that there is no administrator tool for obiee under solaris. How can i create repository in solaris if there is no administration tool.
Kindly help
regards
Nick

here is my instanceconfig.xml file and i have changed it path
<WebConfig>
<ServerInstance>
<DSN>AnalyticsWeb</DSN>
<CatalogPath>/u02/software/OracleBIData/web/catalog/birepository</CatalogPath>
I have place the fold copied from the window in catalog but here is NQServer file out put
2009-04-09 16:23:19
[14058] Unloaded all subject areas.
2009-04-09 16:23:25
[36007] Loading repository /u02/software/OracleBI/server/Repository/samplesales.rpd.
2009-04-09 16:23:26
[14055] Loading subject area: Sample Sales ...
2009-04-09 16:23:27
[14056] Finished loading subject area: Sample Sales.
2009-04-09 16:23:27
[58002] Query Cache loaded with 0 entries from saved cache files.
2009-04-09 16:23:27
[43030] : Oracle BI Server started. Version: 10.1.3.4.0.080726.1900.
its still loading the samplesales.rpd why?
regards
Nick

Need Help: how to create url address in dynamic web (PHP)?

Guys,
I need your help! I'm a newbie in web designing, I just want to ask on how to create a web (dynamic page) link/url.
e.g. http://www.mypage.com/?=home
thanks a lot.

Setup a database table and populate the fields (i.e. auto-numerical_primary_key, id, dynamic_mod_url, title, article_content, etc.) then on your page create a filtered recordset where URL parameter (id) = your database table field (primary_key). Place the bindings of the filtered recordset on the page to show dynamic values for the filtered recordset based on the URL parameter. That way when someone visits yoursite.com/page.php?id=1 it will show the content for the database table where the primary key = 1 and so on. use dynamic_mod_url in conjunction with .htaccess dynamic mod rewrite to change yoursite.com/page.php?id=1 into yoursite.com/the_name_of_dynamic_mod_url_for_primary_key_1.html

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

(Need Help) How to create Numeric text box in SVG

Hello everyone,
Can any one help me to create Numeric TextField in SVG? I'm struggling to do this please someone help me as soon as possible....
Thanks In advance,
Ulaga

To get the best answers, I think you probably need to break down your post into several different one with a separate question in each, along with the business problem you are trying to solve... but here's a few pointers for you to research...
Textbox - there's plenty of info in SDN on creating a custom control with a textbox e.g. Re: Text Editor on modulepool Screen and sample code in SAP too.
Attachments - If this is for an email, then GUI_UPLOAD might help and the BCS class is the newer way to send messages... check out Re: Offline Approval: RBBP_NOTIFICATION_OFFAPP Vs RSWUWFMLEC for example... if this is an attachment for an SAP object such as an FI Document or Purchase Order, then the Generic Object Services (GOS) could be what you want e.g. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
Jonathan

[Help] - How to create BP many times.

Dear all,
Pls help..
i created Business Partners(BP) many times (use FM: COM_BPUS_BUPA_CREATE)
This is the code:
LOOP AT lt_mstcust INTO ls_mstcust.
i FILL data cust that want to be created.
CALL FUNCTION 'COM_BPUS_BUPA_CREATE'
    EXPORTING
      IV_PARTNERCATEGORY         = partner_cat
      IV_BUSINESSPARTNERGROUP    = lv_bpgroup
      IS_CENTRALDATA             = ls_central
      IS_CENTRALDATAORGANIZATION = ls_organ
      IS_ADDRESSDATA             = ls_address
      IV_ACCEPT_ERROR            = 'X'
      IV_BUSINESSPARTNERROLE     = lv_bprole
    IMPORTING
      EV_BUSINESSPARTNER         = lv_bpnumber
    TABLES
      IT_TELEFONDATA             = lt_telephone
      IT_FAXDATA                 = lt_fax
      ET_RETURN                  = lt_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        WAIT   = ''
      IMPORTING
        RETURN = lt_return.
ENDLOOP.
end of code.
The strange problems:
Not all BP that i created saved in table BUT000, although all BP number was generated after running that FM.
So i can say after i run the LOOP, i got all bp number. BUT, some of bp numbers were not found in table BUT000. It means when i run TCODE: BP and i entered BP number that were not found in BUT000, error message (bp is not found) would be raised.
Do u have any solutions for it?
Or are there others creating BP FM that can be run in LOOP (can create BP in many times)?
Please help y..
Ur help is very important for me.
Regards.
Daniel N.

Hi Daniel,
You can try out one of the following.
1. Call the function module "COM_BPUS_INPUTDATA_CHECK" before the function module "COM_BPUS_BUPA_CREATE"
2. Instead of calling the function module "COM_BPUS_BUPA_CREATE" Try calling "BAPI_BUPA_CREATE_FROM_DATA" and then commit and then call "COM_BPUS_BUPA_ROLE_ADD"
3. Try removing the flag IV_ACCEPT_ERROR = 'X' from the function module call.
4. In the BAPI_TRANSACTION_COMMIT pass a value 'X' to the parameter WAIT.
Let me know if this helps!
Jash.

[Seeking help] How to create a bean with annotations @ runtime?

I would like 2 create a bean, @ runtime, as below:
public class A {
@MyAnnotation(id = "ID")
private String id = "";
public String getId() { ... }
public void setId(String id) { ... }
}Can anyone tell me how 2 achieve this? I know how 2 create a bean dynamically, however with annotations it is a bit tricky ..
Cheers!
Edited by: olove66 on Aug 7, 2009 2:00 AM

@_@ I guess anyone interested in this topic can turn 2 ASM. Maybe BCEL has not got anything 2 support annotation creation yet.

How i create a simple sequence in OWB (Example)

Hi,
i want create an simple sequence in OWB. But how i make a simple sequence in the oracle data Warehouse Builder.
Until now i goes into expression Builder of the sequence.
where already written is:
*"SEQ_ACCOUNT".NEXTVAL*
so my idea was to write behind this start with 1 increment by 1
also looks it practically so
*"SEQ_ACCOUNT".NEXTVAL start with 1 increment by 1*
but this doesn´t work. But was is wrong?
Can me give anyone an concrete example for a simple sequence or show how it must write that it will be correct.
I look forward for your replies :)

I have found the solution for this problem :) To create a seqeunce goes to sequences in project explorer ---> new sequences ---> give name and bla bla bla --> right click on to created sequence and choose confiugre. Here you can under sequence parameter configure things as Increment By and Start with But how goes it into expression builder of a sequence?

[ADF Help] How to create a view for multiple tables

Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AM

Hi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon

Need Help, how to create more than one rectangle from one button in one stage of canvas

Dear Guys,
I has problem to create more than one rectangle canvas from one button. here my role to create :
1. I create input size with textfield
2. I click button called "submit query"
3. My web will create a rectangle with specific size.
My problem come when I click again the button, my old rectangle has been remove than my new rectangle has created.
My question is : how I can create more than one without delete/remove the old I was created?
Here my Code :
<head><meta http-equiv="Content-Type" content="text/html; charset=utf-8" /><link rel="stylesheet" type="text/css" media="all" href="css/style.css"><script src="kinetic-v4.7.2.min.js"></script></head> <body><label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5"><br> <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5"><br> <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5"><br> <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="5" maxlength="5"><br> <input name="submit" type="submit"> <script defer>              var stage = new Kinetic.Stage({                container: 'container',                width: 943.5,                height: 254.10              });              var layer = new Kinetic.Layer();              var rectX = stage.getWidth() / 2 - 50;              var rectY = stage.getHeight() / 2 - 50;                            var group = new Kinetic.Group({                draggable: true              });                                         var box = new Kinetic.Rect({                x: rectX,                y: rectY,                width: <?php echo ($_POST['panjang']/10)/1.3; ?>,                height: <?php echo $_POST['lebar']/10; ?>,                //fill: '#00D2FF',                stroke: 'blue',                strokeWidth: 2                //draggable: true              });               var simpleText = new Kinetic.Text({                x: Math.round(box.getWidth() / 2),                y: Math.round(box.getHeight() / 2),                text: '<?php echo $_POST['tinggi'].'/'.$_POST['nam_pac']; ?>',                fontSize: 30,                fontFamily: 'Calibri',                fill: 'blue',              });                                          // add cursor styling              box.on('mouseover', function() {                document.body.style.cursor = 'pointer';              });              box.on('mouseout', function() {                document.body.style.cursor = 'default';              });                            group.add(box);              group.add(simpleText);              layer.add(group);              stage.add(layer);            </script></body>
this is my printscreen may help you to help me :
thanks before to help me
Regards,
Prabowo.

It's work Ken, but if I modify your code into my code.
error again. they say like before (...is undefined)
May You want to check my code
<?php
include('pinambung.php');
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>GI Loading Plan Maker</title>
<meta name="viewport" content="width=device-width" />
<link rel="stylesheet" type="text/css" media="all" href="css/style_2.css">
<script src="js/kinetic-v4.7.2.min.js"></script>
<script src="js/CalendarPopup.js"></script>
<script src="js/jquery-1.10.2.js"></script>
</head>
<body>
<header class="w" id="header"> 
      <img src="images/headers.jpg" width="100%" height="100%" />
</header>
<nav class="w" id="nav">
      <?php include('top.php'); ?>
</nav>
<section class="w" id="main">
      <section id="content">
      <article>
        <h2>Customer Info</h2>
        <form id="myForm" action="insert.php" method="post">
        <label>Customer Name :</label><input name="cs_name" id="cs_name" type="text" size="25" maxlength="50">
        <br>
        <label>Date of Shipment :</label><input name="shipment_date" id="shipment_date" type="text" size="10" maxlength="12" > use format : YYYY-MM-DD
        <br />
        <label>Container Name :</label><input name="con_num" id="con_num" type="text" size="10" maxlength="12">
        <label>Revision :</label><input name="revision" id="revision" type="text" size="5" maxlength="5"><br />
        <label>Prepared by :</label><input name="prepared_by" id="prepared_by" type="text" size="25" maxlength="50">
        <button id="saveinfo">Save As DB</button>
        <button id="saveall">Save As Image</button>
        <button id="print" onclick="window.print();return false">Print</button>
        </form>
        <span id="result"></span>
        <script type="text/javascript" src="js/insert.js"></script>
      </article>
          <br /><br />
      <article>
          <h2>Packing Info</h2>
        <label>Container Type :</label>
        40' HC<input name="con_type" type="radio" id="con_type" value="40hc">
        40'<input name="con_type" type="radio" id="con_type" value="40">
        20<input name="con_type" type="radio" id="con_type" value="20"><br />
        <input name="loadstan" type="button" value="Create Container" id="isSelect">
        <button id="removecon">Remove Container</button>
        <br />
        <label>Length</label><input name="panjang" id="panjang" type="text" size="5" maxlength="5">
        <label>Width</label><input name="lebar" id="lebar" type="text" size="5" maxlength="5">
        <label>Height</label><input name="tinggi" id="tinggi" type="text" size="5" maxlength="5">
        <label>Packing Name</label><input name="nam_pac" id="nam_pac" type="text" size="20" maxlength="55">
        <input name="loadstan" id="loadstan" type="button" value="Load Standard Packing" onclick="window.open('spk.php', 'winpopup', 'toolbar=no,statusbar=no,menubar=no,resizable=yes,scrollbars=yes,width=300,height=400');">
        <input name="submit" type="submit" value="Create Box">
        <button id="remove">Remove Box</button><br />
      </article>
    </section>
    <aside id="sidebar">
      <label for="layer-to-delate">Select a layer to delete or rotate</label><br />
      <select id="layer-to-delete" size="14"></select><br />
      <input id="delete-layer-button" type="button" value="Delete layer">
      <input id="rotate-layer-button" type="button" value="Rotate box">
    </aside>
    <section id="content2">
      <div id="container">
      </div>
      <script defer>
      function radians (degrees) {return degrees * (Math.PI/180)}
      function degrees (radians) {return radians * (180/Math.PI)}
      function angle (cx, cy, px, py) {var x = cx - px; var y = cy - py; return Math.atan2 (-y, -x)}
      function distance (p1x, p1y, p2x, p2y) {return Math.sqrt (Math.pow ((p2x - p1x), 2) + Math.pow ((p2y - p1y), 2))}
        var stage = new Kinetic.Stage({
            container: 'container',
            width: 943.5,
            height: 254.10
        var layers = new Array();
       function addCont(){
           layer2 = new Kinetic.Layer();
            switch ($('input:radio[name=con_type]:checked').val()){
              case '40hc':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 HC (11900mm X 2300mm X 2550mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '40':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 1190/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 40 (11900mm X 2300mm X 2250mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
                 case '20':
                 var box_con = new Kinetic.Rect({
                      x: 10,
                      y: 10,
                      width: 580/1.3,
                      height: 2300/10,
                      stroke: 'black',
                      strokeWidth: 2
                  var TextCon = new Kinetic.Text({
                      x: 10,
                      y: 240,
                      text: 'Container Size 20 (5800mm X 2300mm X 2250 mm)',
                      fontSize: 12,
                      fontFamily: 'Calibri',
                      fill: 'green',
                  layer2.add(box_con);
                  layer2.add(TextCon);
                  stage.add(layer2);
                  break;
        function addRect() {
            layer = new Kinetic.Layer();
            var box = new Kinetic.Rect({
                x: 10,
                y: 10,
                width: +(($("#panjang").val()/10)/1.3),
                height: +($("#lebar").val()/10),
                stroke: 'blue',
                strokeWidth: 2
            var group = new Kinetic.Group({
                        draggable: true,
                        snap : true
            var boxLabel = $("#nam_pac").val() + "/H : " + $("#tinggi").val();
            if (($("#panjang").val() && $("#lebar").val()) != 0) {
            var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: boxLabel,
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            } else {
                var simpleText = new Kinetic.Text({
                x: 10,
                y: 10,
                text: '',
                fontSize: 12,
                fontFamily: 'Calibri',
                fill: 'red',
            group.add(box);
            group.add(simpleText);
            layer.add(group);
            stage.add(layer);
            layers.push(layer);
            $("#layer-to-delete").append("<option>Layer " + boxLabel + "</option>");
        function deleteRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers.splice(i,1)[0].destroy();
            $("#layer-to-delete > option").eq(i).remove();
        function rotateRect() {
            if($("#layer-to-delete > option").length < 1) return;
            var i = $("#layer-to-delete").prop("selectedIndex");
            layers[i].rotateDeg(30);
            layers[i].draw();
        $("#delete-layer-button").click(function(e) {
              deleteRect();
        $("#rotate-layer-button").click(function(e) {
            rotateRect();
        $("input[type=submit]").click(function(e) {
            addRect();
        $("#isSelect").click(function () {
              addCont();
        $("#removecon").click(function () {
              layer2.destroy();
        $(window).keypress(function(e) {
            if(!$(document.activeElement).is("label")) {
                if((e.keyCode || e.which) == 46) {
                    layer.destroy();
            if((e.keyCode || e.which) == 35) {
                    layer2.destroy();
        document.getElementById('saveall').addEventListener('click', function() {
          stage.toDataURL({
            callback: function(dataUrl) {
                  window.open(dataUrl);
        }, false);
      </script>
    </section>
</section>
<footer class="w" id="footer">
    Copyright <a href="login.php" target="_new">©</a> 2013, <a href="http://omhanggar.com" target="_new">created</a><a href="http://intranet.guentner-asia.com" target="_new"> by PT. Güntner Indonesia </a>
</footer>
</body>
</html>
thanks again before,
Prabowo

How to create new repository in Oracle 6i

In a completely new Oracle 6i (R6.) installation there seems to be now way to create a new repository. All the help and documentation existing connections, expect a pre-existing database to exist, or a directory
ORACLE_HOME\ADMIN\user\
to exist with a config file in it.
None of these conditions is true upon a clean, default installation.
Is there a short list of command line Repository Admin commands that one can begin with?
(signed, confused newbie just starting Oracle courses ;-)

Hi,
You need to install an Oracle database instance. The Repository Administration Utility (RAU) is then used to install the Repository schema into the database.
Follow the installation guide that comes with Oracle 8i to install the database first.
Brian

Help! how to create a repository correctly of owb?

Similar Messages

Maybe you are looking for