Help: How to get this query?
I am working one a query and the analogy is like:
TABLE TEST has two columns: order_ID, amount
I'd like to get a query that will show
Amount range ---# of order ---total amount
$0 - $999
$1000 - $4,999
$5,000 - $9,999
$10,000 - $19,999
$20,000 - $49,999
$1,000,000
Please post your suggestions.
Thank you in advance.
Jimmy
Message was edited by: Jimmy
Jimmy
Hi Jimmy,
Here is an example please change the column names according to your example.
SELECT '$0 - $99' as range
, count(CASE WHEN sal BETWEEN 0 and 1000 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 0 and 1000 THEN sal END) total_amount
FROM emp
WHERE case when sal between 0 and 1000 then sal end is not null
UNION ALL
SELECT '$100 - $4999' as range
, count(CASE WHEN sal BETWEEN 1000 and 4999 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 1000 and 4999 THEN sal END) total_amount
FROM emp
WHERE case when sal between 1000 and 4999 then sal end is not null
UNION ALL
SELECT '$5000 - $9999' as range
, count(CASE WHEN sal BETWEEN 5000 and 9999 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 5000 and 9999 THEN sal END) total_amount
FROM emp
WHERE case when sal between 5000 and 9999 then sal end is not null
UNION ALL
SELECT '$10000 - $19999' as range
, count(CASE WHEN sal BETWEEN 10000 and 19999 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 10000 and 19999 THEN sal END) total_amount
FROM emp
WHERE case when sal between 10000 and 19999 then sal end is not null
UNION ALL
SELECT '$20000 - $49999' as range
, count(CASE WHEN sal BETWEEN 20000 and 49999 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 20000 and 49999 THEN sal END) total_amount
FROM emp
WHERE case when sal between 20000 and 49999 then sal end is not null
UNION ALL
SELECT '$50000 - $1000000' as range
, count(CASE WHEN sal BETWEEN 500000 and 1000000 THEN sal END) as count
, sum(CASE WHEN sal BETWEEN 500000 and 1000000 THEN sal END) total_amount
FROM emp
WHERE case when sal between 500000 and 1000000 then sal end is not null;HTH
Ghulam
Similar Messages
-
hi,
1).i want to know how to suppress duplicate rows in table.
2).i want to know how to delete last two rows in table.
help me
thanks in advance.
sai.Ans1) You can use RowId for that like if we have table like:
Table name : Emp
Column Name
1) Code
2) Name
Then we can suppress duplicate records by following Command:
Delete from Emp
where rowid not in(select max(rowid) from emp
group by name,code);
I will tell you ans 2 later.
Vidya
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by [email protected]:
hi,
1).i want to know how to suppress duplicate rows in table.
2).i want to know how to delete last two rows in table.
help me
thanks in advance.
sai.<HR></BLOCKQUOTE>
null -
Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
ThanksIf the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it: -
How to modify this query to get the desired output format
I hv written a Query to display all the parent table names and their primary key columns(relevant to this foreign key of the child table).The query is given below...
SELECT DISTINCT(TABLE_NAME) AS PARENT_TABLE,COLUMN_NAME AS PARENT_COLUMN
FROM ALL_CONS_COLUMNS
WHERE CONSTRAINT_NAME IN (SELECT AC.R_CONSTRAINT_NAME
FROM ALL_CONSTRAINTS AC
WHERE AC.TABLE_NAME=TABLE_NAME
AND AC.TABLE_NAME='&TABLE'
AND AC.R_CONSTRAINT_NAME IS NOT NULL);
This query will display all the parent tables and their primary key columns.Now my problem is that how to modify this query to also display the foreign key column name of the child table.
I want the query result in the following format.The query should display the following columns.1)child table's name,2)child table's foreign key column name,3)the corresponding parent table's name,4)the parent table's primary key column name(which is the foreign key in the child table).
For Example I want the output as follows...
TAKE THE CASE OF SCOTT.EMP(AS INPUT TO YOUR QUERY)
CHILD_TABLE CHILD_COLUMN PARENT_TABLE PARENT_COLUMN
EMP DEPTNO DEPT DEPTNO
In this result I hv used alias name for the columns.The query should display this only for the foreign keys in the child table.In the query which I sent to you earlier will give the parent table and the parent column names,But I also want to append the child table and child column names there.
any help on how to tackle would be appreciated.Try this query
SELECT c.table_name child_table,
c.column_name child_column,
p.table_name parent_table,
p.column_name parent_column
FROM user_constraints a,user_constraints b,user_cons_columns c,
user_cons_columns p
WHERE a.r_constraint_name=b.constraint_name and
a.constraint_name=c.constraint_name and
b.constraint_name=p.constraint_name and
c.position=p.position
ORDER BY c.constraint_name,c.position
Anwar -
How to rewrite this query without sub query please help me
Hello All Good Evening,
Could you please help me with this query, how can i write this query without sub query, or how can write this query another ways
please help me
select planno, status1, count(*) Counts from
select a.ValetNO PlanNo ,
case
when JoinCode in ('00', '01', '02') then 'Actcess'
when JoinCode in ('20', '21', '22', '23','38', '39') then
'Secured' else 'Other' end Status1 ---, COUNT (*)
from dbo.ppt a(NOLOCK) left join dbo.acts b on a.P_ID = b.P_ID and a.ValetNO = b.ValetNO
--group by a.ValetNO
a group by planno, status1
order by 2
Thank you in Advance
MilanWhats your objective here? Sorry, am not able to understand the reason for this change.
Try the below:(Not tested)
;With cte
As
select a.ValetNO PlanNo ,
case
when JoinCode in ('00', '01', '02') then 'Actcess'
when JoinCode in ('20', '21', '22', '23','38', '39') then
'Secured' else 'Other' end Status1 ---, COUNT (*)
from dbo.ppt a(NOLOCK) left join dbo.acts b on a.P_ID = b.P_ID and a.ValetNO = b.ValetNO
select planno, status1, count(*) Counts from cte
a group by planno, status1
order by 2
Even below:
select a.ValetNO PlanNo ,
case
when JoinCode in ('00', '01', '02') then 'Actcess'
when JoinCode in ('20', '21', '22', '23','38', '39') then
'Secured' else 'Other' end Status1 , COUNT (1)
from dbo.ppt a(NOLOCK) left join dbo.acts b on a.P_ID = b.P_ID and a.ValetNO = b.ValetNO
Group by a.ValetNO ,
case
when JoinCode in ('00', '01', '02') then 'Actcess'
when JoinCode in ('20', '21', '22', '23','38', '39') then
'Secured' else 'Other' end -
How to get this output using sql query?
Hi,
How to get this output using sql query?
Sno Name Age ADD Result
1 Anil 23 delhi Pass
2 Shruti 25 bangalor Pass
3 Arun 21 delhi fail
4 Sonu 23 pune Pass
5 Roji 26 hydrabad fail
6 Anil 28 delhi pass
Output
Sno Name Age ADD Result
1 Anil 23 delhi pass
28 delhi passHi Vamshi,
Your query is not pretty clear.
write the select query using Name = 'ANIL' in where condition and display the ouput using Control-break statements.
Regards,
Kannan -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
How to get select query for crystal report in c# code
In C#, (Visual Studio 2008 ) I need to use the native Crystal Reports objects to get the complete SQL statement as it appears when you view it in Crystal Reports.
In Crystal Reports 12.0, Go to "Database > Show SQL Query..." ... That is what I need to get via C# code. I can get bits and pieces of parameter info etc but I just want the whole SQL statement.
How to get this?Hi Ganesh,
It's simple to use RAS, include the assemblies and use this to open your report document:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using CrystalDecisions.ReportAppServer.ClientDoc;
using CrystalDecisions.ReportAppServer.Controllers;
using CrystalDecisions.ReportAppServer.ReportDefModel;
using CrystalDecisions.ReportAppServer.DataSetConversion;
using CrystalDecisions.ReportAppServer.DataDefModel;
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rptClientDoc;
To open the report use:
object rptName = openFileDialog.FileName;
rpt.Load(rptName.ToString());
rptClientDoc = rpt.ReportClientDocument;
Then to get the SQL set the log on info:
rptClientDoc.DatabaseController.LogonEx("10.50.212.77,1433", "xtreme", "sa", "password");
GroupPath gp = new GroupPath();
string tmp = String.Empty;
rptClientDoc.RowsetController.GetSQLStatement(gp, out tmp);
MessageBox.Show(tmp, "Data Source Set and SQL Statement", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thank you
Don -
OAF page : How to get its query performance from Oracle Apps Screen?
Hi Team,
How to get the query performance of an OAF page using Oracle Apps Screen ??
regards
sridharGo through this link
Any tools to validate performance of an OAF Page?
However do let us know as these queries performance can be check through backend also
Thanks
--Anil
http://oracleanil.blogspot.com/ -
I have (or had?) 2 alias My main account is on iCloud. I followed the instructions to go from MobileMe to iCloud. But the alias stayed on MobileMe server (?) How to get this to iCloud? Not possible to put them into icloud as alias. How to keep it working?HELP HELP because people sending me things to this email and since today no excess any more to the mobile me server? And how to move this?????
<Emails Edited by Host>Firstly, I note that your profile states that you are using OS X 10.5.8, in order to use iCloud on your computer you need OS X 10.7.2 or better.
Secondly, I have asked for your email address to be edited out. Post your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
Finally, are you sure that these additional addresses are aliases and not sub accounts on a family pack, aliases from MobileMe should transfer to an iCloud when you migrate. -
hi,
i have a product table like
product month1 month2 month3 .................
soap 1200 1256 1895 ............
i want use a query where i can select column name with a parameter.
like
select month||:num from product;
in num variable it cud be 1 to 10 of value that is dependent on my program.
so how to make this query .
thxsHi,
Here is an example that i am helpful.
In the example , I am using a table 'table_name' which contains columns like
assign_attribute1
assign_attribute2
assign_attribute15
Now I will pass any number from 1 to 15 to the function.
create or replace procedure pass_col_number(v_number varchar2) as
v_sql varchar2(2000);
v_assign_attribute1 varchar2(150);
begin
v_sql := 'select assign_attribute'||v_number||' from table_name where person_id = 1345';
execute immediate v_sql into v_assign_attribute1;
dbms_output.put_line('v_assign_attribute1='||v_assign_attribute1);
end;Edited by: Sreekanth Munagala on Dec 18, 2008 1:18 AM -
How to combine this query so that i can display the ouput together
I have no idea how to combine this query together.Someone please help.I want the ouput to display oni 1 result combining all together.
select facility, route, operation, script_id
from F_ROUTEOPER
where facility = 'A01' and operation in ('6910','7976') AND src_erase_date is null
and (script_id not in ('PHQ-LOTCHKRV','PHQ-LOTCHK') or script_id is null)
AND (route NOT LIKE '9EL%' AND route NOT LIKE '9TB%'AND route NOT LIKE 'BLB%' AND route NOT LIKE 'BWR%' AND route NOT LIKE 'CRL%')
select facility, route, operation, script_id
from F_ROUTEOPER
where facility = 'A01' and operation in ('6912','7976') AND src_erase_date is null
and (script_id not in ('PHQ-LOTCHKRV','PHQ-LOTCHK') or script_id is null)
AND (route NOT LIKE '9EL%' AND route NOT LIKE '9TB%'AND route NOT LIKE 'BLB%' AND route NOT LIKE 'BWR%' AND route NOT LIKE 'CRL%')
select facility, route, operation, script_id
from F_ROUTEOPER
where facility = 'A01' and operation in ('7344','7976') AND src_erase_date is null
and (script_id not in ('PHQ-LOTCHKRV','PHQ-LOTCHK') or script_id is null)
AND (route NOT LIKE '9EL%' AND route NOT LIKE '9TB%'AND route NOT LIKE 'BLB%' AND route NOT LIKE 'BWR%' AND route NOT LIKE 'CRL%')
select facility, route, operation, script_id
from F_ROUTEOPER
where facility = 'A01' and operation in ('8344','7976') AND src_erase_date is null
and (script_id not in ('PHQ-LOTCHKRV','PHQ-LOTCHK') or script_id is null)
AND (route NOT LIKE '9EL%' AND route NOT LIKE '9TB%'AND route NOT LIKE 'BLB%' AND route NOT LIKE 'BWR%' AND route NOT LIKE 'CRL%')
Edited by: 965547 on Nov 5, 2012 12:55 AMThe only difference which i am seeing in your queries is the Operation ('6910', '6912','7344','8344')
Then why don't you put all values in One like this
Select facility, route, operation, script_id
from F_ROUTEOPER
where facility = 'A01' and operation in *('6910', '6912','7344','8344','7976')* AND src_erase_date is null
and (script_id not in ('PHQ-LOTCHKRV','PHQ-LOTCHK') or script_id is null)
AND (route NOT LIKE '9EL%' AND route NOT LIKE '9TB%'AND route NOT LIKE 'BLB%' AND route NOT LIKE 'BWR%' AND route NOT LIKE 'CRL%')
Hope this will resolve your problem.
Oracle-911 -
How to write this query to filter combination of few values
Hi,
I have a table CHIMM which is a transaction table and contains information of the vaccines given to a child.
columns are: child_id, vacc_id, vacc_given_dt. I have to query for remaining vaccines.
HEXA is a vaccine_id which is composite vaccine of DPT1,POL1,HBV1 & HIB1 (vaccine ids).
I want to write to query if any of DPT1,POL1,HBV1 & HIB1 given then HEXA should not be displayed in the result.
OR
if HEXA is given then of course any of DPT1,POL1,HBV1 & HIB1 should not be displayed in the result.
How to write this query?
RegardsHi,
I'm still not sure what the output you want from that sample data is. Do you just want the child_ids, like this
CHILD_ID
3
4? If so, here's one way to get them:
WITH all_vacc_ids AS
SELECT c.child_id
, c.vacc_id AS child_vacc_id
, v.vacc_id
, COUNT ( CASE
WHEN c.vacc_id = 'HEXA'
THEN 1
END
) OVER ( PARTITION BY c.child_id
) AS hexa_itself
FROM vacc v
LEFT OUTER JOIN chimm c PARTITION BY (c.child_id)
ON c.vacc_id = v.vacc_id
WHERE v.vacc_desc = 'HEXA' -- See note below
SELECT child_id
FROM all_vacc_ids
WHERE child_vacc_id IS NULL
AND vacc_id != 'HEXA'
AND hexa_itself = 0
GROUP BY child_id
rha2 wrote:there are alot of vaccines, i just put 3 for example. this query gives error: invalid relational operatorAre you saying that the vacc table contains other rows, but those other rows are not needed for this problem? It would be good if you included an example in the sample data. The query above considers only the rows in vacc where vacc_desc='HEXA'. You can have other rows in the vacc table, but they won't affect the output of this query. The query above makes no assumptions about the number of rows that have vacc_desc='HEXA'; it will report all child_ids who are missing any of them, regardless of the number (assuming the child does not have the 'HEXA' vacc_id itself, like child_id=1).
You still haven't said which version of Oracle you're using. The query above will work in Oracle 10 (and higher). -
how to write this query ?
list the emp name who is working for the highest avg sal department.
I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?
the row_number version is like this
select emp.* from emp ,
select deptno, row_number() over (order by avg(sal) desc) r from emp
group by deptno
)e
where e.r = 1
and emp.deptno = e.deptnoHi,
806540 wrote:
how to write this query ?
list the emp name who is working for the highest avg sal department.
I can use row_number over to get correct result. If we don't use this row_number function, just plain sql, how to do it ?ROW_NUMBER is just plain SQL, and has been since Oracle 8.1.
ROW_NUMBER (or its close relative, RANK) is the simplest and most efficient way to solve this problem. Why not do this the right way?
the row_number version is like this
select emp.* from emp ,
select deptno, row_number() over (order by avg(sal) desc) r from emp
group by deptno
)e
where e.r = 1
and emp.deptno = e.deptno
If there happens to be a tie (that is, two or more departments have the same average sal, and it is the highest), then the query above will only arbitrarily treat one of them (no telling which one) as the highest. Change ROW_NUMBER to RANK to get all departments with a claim to having the highest average sal.
You could use the ROWNUM pseudo-column instead of ROW_NUMBER, if all you want to do is avoid ROW_NUMBER.
Without using ROW_NUMBER or RANK, there are lots of ways involving other analytic functions, such as AVG and MAX.
If you really, really don't want to use analytic functions at all, you can do this:
SELECT *
FROM scott.emp
WHERE deptno IN (
SELECT deptno
FROM scott.emp
GROUP BY deptno
HAVING AVG (sal) = (
SELECT MAX (AVG (sal))
FROM scott.emp
GROUP BY deptno
; -
SqlServer 2008 Database Status Showing(Recovery pending)..How to get this database in online?
SqlServer 2008 Database Status Showing(Recovery pending)
How to get this database in online?
This is SharePoint Content database.
BadriSqlServer 2008 Database Status Showing(Recovery pending)
How to get this database in online?
This is SharePoint Content database.
Badri
Hi,
Please try running below in master database
restore database db_name with recovery
Chances are that this command would not succeed because I guess there was corruption in database and you restarted SQL Server service. Or can you please tell how your database went into recovery pending state.
Please check SQL Server errorlog you would find information regarding this change. Please post relevant log information here. Please check event viewer as well
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles
Maybe you are looking for
-
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone? Thank you in advance,
-
Syncing my iPod classic with Itunes on Windows 8
Hello, I completed an itunes update a few days ago. Since that time; I have been unable to sync my iPod classic with my library or even manage it. I have been searching and see that this has become an issue for many people who use Windows 8. Is there
-
Upload Multiple documents in SharePoint document Library not working
Hi All, I have folder on my desktop which consists of nested folders and files(Total 11 files) .And when I select "Upload multiple files" option to upload documents and drag the folder from the desktop in pop-up window . The sharepoi
-
Installer Adobe Acrobat 7 Standard
Dear, I need help. I have looked at the site and tried to contact via e-mail but without success. I have a license for Adobe Acrobat 7.0 Standard, but do not have the installer. I wonder where I can download the installer.
-
I was doing some work in Aperture (most uptodate for Mountain Lion) when the app froze. But not only did the app freeze, the whole system locked-up. Upon forced restarting I tried relaunching Aperture and got this warning message: "There was an error