Help - How to insert onto a tape...

I know there has to be a way to do this, but... How do you insert edit a program onto a tape to a specific timecode? I've been looking through the manual, but can't seem to find anything on it.
The program is a 30-minute doc, shot in 720p-24N with the Panasonic P2 Camera. The Mac is exporting through an AJA Kona II card.
Thanks,
Tim Walton
KVIE Public Television

You black the tape with sufficient preroll (for example, 58:40:00 - which allows for approximately 10 seconds of black, 1 minute of bars and tone, 20 seconds of black and program beginning at 1 hr). The you do an Edit to Tape (which is in the file menu) making 58:50:00 (in the above example) you're in point. Generally, I prefer adding bars and tone, etc. directly in my sequence before outputting rather than letting the edit to tape tool do it. I haven't done it in a while, but if I remember correctly, it's a little tricky getting this to work. Can't remember exactly what the problem was, but it had something to do with closing certain windows and where you drag your sequence from.
This method is for using an assemble edit (so you don't have to black the entire tape). You can use insert edit with certain decks (I don't think firewire control allows this) if sufficient tape is blacked.

Similar Messages

Urgent help : how when insert new record navigation off

hi master
Sir
when i insert new record by mistake press down key and curser move to next record and my need is
When I insert new record or change any record that time my form navigation musht be off and no move to next record how I restrict to navigation please give me idea which event and what code I use
Thanking you
aamir

If u want the cursor not to move ahead from a particular field when the records are inserted or updated on that field then u can just write null to the
key-next-item trigger of that particular item.
ie IN key-next-item
null;
Hope this is what you wanted.

Help - how to insert line feed in string

Hello,
I have a servlet that reads lines from a database and I must append them to build a document. There is a field for the data nad a field to tell how many lines to skip.
// from database
data String 198
skip one character
String doc = "";
This is not working
doc = doc + data + '\n';
for (i=1; i < skip; i++) {
doc = doc + '\n';
doc ends up with no spaces between lines.
Can someone help me with this?
Thanks
Frank

not working = doc ends up with no spaces between lines.
line1
line2
line3
should be
line1
line2
line3
Thanks
Frank

How to insert record inside the internal table in below code

Hi all,
My requirement is to find the sub-total and need to insert in between the internal table.
You can see the output ....where I want the sub-total F2 when 1 & 2 combindely , 3 , 4& 5 combindely .Please check it and let me know is it possible
when i am using modification it is not creating extra row inside the table instead it is modifying one row and putting the total there.
For ex: the origianl output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
D      3          1
E      4          1
C      5          1
We want to display all the total of f2 of 1-2 , 3 , 4-5
so expcected output is
F1   F2       F3
A      1          1
B      1          1
F      2          1
     *              3 ->This is the sub-total of 1& 2 of f2
D      3          1
        *           1 ->this is the sub-total of 3
E      4          1
C      5          1
      *             2 -> this is the sub-total of 4 & 5
= space
But coming output is
A 1          1
B 1          1
*             3 -> it is modifying the F row and inserting the total .Total is comong correct but is shoule insert instead of modifying the record!!
*           1
E 4          1
*             2
Please help how to insert the row total at the end of the chage of field
Please find the below code ..Due to space problem i am attaching below
Sas

Here is the solution ....i Got the answer Thanks for your helping hands friends
REPORT YTEST_MODIFY.
DATA: BEGIN OF ITAB OCCURS 1,
TOT TYPE C,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF ITAB.
DATA: BEGIN OF JTAB OCCURS 1,
F1 TYPE C,
F2 TYPE C,
F3 TYPE I ,
END OF JTAB.
START-OF-SELECTION.
ITAB-F1 = 'A'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'B'.
ITAB-F2 = 1.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'C'.
ITAB-F2 = 5.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'D'.
ITAB-F2 = 3.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'E'.
ITAB-F2 = 4.
ITAB-F3 = 1.
APPEND ITAB.
ITAB-F1 = 'F'.
ITAB-F2 = 2.
ITAB-F3 = 1.
APPEND ITAB.
SORT ITAB BY F2.
LOOP AT ITAB.
    WRITE:/1 ITAB-F1 ,
          8 ITAB-F2 ,
          10 ITAB-F3 .
ENDLOOP.
LOOP AT ITAB.
    IF ITAB-F2 = 1 OR ITAB-F2 = 2.
      ITAB-TOT = 1.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 3.
      ITAB-TOT = 3.
      MODIFY ITAB.
    ELSEIF ITAB-F2 = 4 OR ITAB-F2 = 5.
      ITAB-TOT = 4.
      MODIFY ITAB.
    ENDIF.
ENDLOOP.
SKIP 2.
SORT ITAB BY TOT.
DATA : L_SUM(2) TYPE C,
         L_ROW(2) TYPE C.
LOOP AT ITAB.
    MOVE-CORRESPONDING ITAB TO JTAB.
    APPEND JTAB.
    L_SUM = L_SUM + ITAB-F3 .
    AT END OF TOT.
      CLEAR JTAB.
      JTAB-F3 = L_SUM .
      APPEND JTAB.
      CLEAR L_SUM.
    ENDAT.
ENDLOOP.
LOOP AT JTAB.
    WRITE:/1 JTAB-F1 ,
          8 JTAB-F2 ,
          10 JTAB-F3 .
ENDLOOP.
* DATA: a TYPE i , b .
* LOOP AT itab.
*    IF b = 0.
*      a = a + itab-f3.
*    ENDIF.
*    AT END OF tot.
*      MOVE space TO itab-f1.
*      MOVE space TO itab-f2.
*      MOVE a TO itab-f3.
*      MODIFY itab .
*      CLEAR a.
*      b = 1.
*    ENDAT.
*    b = 0.
* ENDLOOP.
* LOOP AT itab.
*    MOVE-CORRESPONDING itab TO jtab.
*    APPEND jtab.
* ENDLOOP.
* ULINE.
* LOOP AT jtab.
*    WRITE: / jtab-f1 , jtab-f2 , jtab-f3.
* ENDLOOP.

How to insert special character from Oracle form builder 10g

Dear all,
I need help. how to insert special character like 'Superscript or Subscript ' from oracle form builder 10g. I had try in Oracle form builder 6i with press ALT+ASCII code in the text item and it work, but in the oracle form builder 10g this method doesn't work... would you like to help me...somebody please...
Best Regard,
Dedy P.T.

What do you mean by insert ... from Forms Builder? Do you mean you want to add it as text in a string of pl/sql code or as part of boiler plate text (label) or a value on the Property Palette?
For special characters you would need set NLS_LANG to something that would support the characters you want to use. For the Builder to see the change, you would need to set NLS_LANG to something like:
NLS_LANG=AMERICAN_AMERICA.UTF8
This can be done in the Windows Registry or system. As I mentioned, this will only apply to the Builder and will have nothing to do with a running form. For running forms you would need to set this in default.env. As for things like super and sub scripts, these are font formats and not necessarily characters. For the most part, I don't believe these are supported in Forms.

HT201299 HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

My Ipad doesnt have the space to pin out the sim card tray...?
I think i have been gifted the Ipad which doesnt support sim card. Is it so?
My model no is- A1416....?

Hi, plz help me. i wanna store photos to sql database. so how to insert file field into insert record in dreamweaver cs3?

I dont know how to insert file field into insert record in DW. i also want to know, insert dynamic table with image field. Plz help me anyone. Ty..

ohh kk thank you bro. But How to store photos to server file. I wanna upload and display the photos in webpage. Can you send me the php code for this?

Could someone help me out how to insert a Node properly into a DOM?

I am trying to insert a Node built from a String to a DOM.
Here is how I created the Node
               Detail = "<Detail><Msg>Detail Message</Msg></Detail>";
               prolog = "<?xml version="1.0" encoding="UTF-8"?>";
               Node DetailNode = null;
               Document DetailDoc = null;
               if( Detail != null ){
                    Detail = prolog + BiometricDetail;
                    DetailDoc = xp.XML2DOM( BiometricDetail ); // transform a XML String into a DOM.
                    DetailNode = BiometricDetailDoc.getDocumentElement();
Here is how I created the DOM
               javax.xml.parsers.DocumentBuilderFactory factory = javax.xml.parsers.DocumentBuilderFactory.newInstance();
               javax.xml.parsers.DocumentBuilder builder = factory.newDocumentBuilder();
               Document document = builder.newDocument();
               Element beeE = document.createElement("BeeSets");
               Element grpE = document.createElement("Group");
               bioE.appendChild( grpE );
               // the document looks like "<BeeSets><Group></Group><BeeSets>";
               // After inserting the Node DetailNode, I want it to look like
               // "<BeeSets><Group><Detail><Msg>Detail Message</Msg></Detail></Group><BeeSets>";
Now when I tried to insert the node DetailNode to the DOM document, I tried
1) document.importNode( DetailNode, true );
No exception was thrown. But when I transformed the DOM document back to a String, I could not see the information from the newly imported Node DetailNode.
When I tried
          grpE.insertBefore( BiometricDetailNode, dataE );
I got the following exception.
     org.w3c.dom.DOMException: WRONG_DOCUMENT_ERR: A node is used in a different document than the one that created it.
     at org.apache.xerces.dom.ParentNode.internalInsertBefore(Unknown Source)
     at org.apache.xerces.dom.ParentNode.insertBefore(Unknown Source)
     at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:497)
2) document.adoptNode( DetailNode );
I got the following exception.
     java.lang.ClassCastException: org.apache.xerces.dom.DocumentImpl
     at org.apache.xerces.dom.DeferredTextImpl.synchronizeData(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ParentNode.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.ElementImpl.setOwnerDocument(Unknown Source)
     at org.apache.xerces.dom.CoreDocumentImpl.adoptNode(Unknown Source)
     at com.jadcs.bioidentity.role.base.RP.getNodes(RP.java:509)
3) detailStr = "<Detail><Msg>Detail Message</Msg></Detail>";
Element detailE = document.createElement("Detail");
detailE.setTextContent( detailStr );
grpE.appendChild( detailE );
This way gives result like "<BeeSets><Group><Detail><Detail><Flash>On</Flash></Detail></Detail></Group><BeeSets>";
The content is messed up.
Could someone help me out at how to insert a Node properly into a DOM? Thank you very much.

Said another way, importNode actually only makes and returns a copy of the node you gave it (it will be a deep copy only if you pased true as the second parameter), but where the new dom you called import on is owner.
So what you need to do is more like this:
Node tempNode = domYouAreAddingTheNodeTo.importNode(node2copy,true); //true if you want a deep copy
domYouAreAddingTheNodeTo.appendNode(tempNode);You can also traverse to any point in the DOM and insert the node there with the same method, but you always have to import first so that the DOM has a copy of the node that it owns.

Can someone tell me step by step how to record from audio tape to mac book with the help of xitel import deluxe

Can someone tell me step by step how to record from audio tape to mac book with the help of xitel inport deluxe system. Somebody had mentioned that we do not have to download the software - so I did not, but the computer does not recognize the connection. How can I know it is connected - can someone please tell me step by step as teaching a layman. Thanks.

It seems this question is best posed to the makers of "xitel".
I looked up A product and it is out for Windows but does not mention Mac OS X:
http://www.xitel.com/USA/prod_inportpro.htm

Help me, How to insert Rectangle which fill color to image picture

How to insert Rectangle which fill color to image picture and then It is saved file JPG

> Is it possible to get the data from CSV files.
Have you tried searching this forum?

Using pages how to insert pdf files on ipad?

using pages how to insert pdf files on ipad?
Anybody have any idea, have pdf files in ibook do not see where to insert pdf's.
Also trying to get word files onto ipad using drop box, do these word files need to be saved in another format?
Also for pages.
thnx

No - the Word files do not need to be saved in any other format if you have Pages on your iPad. There are other apps that provide better compatibility than Pages but it will work for you. You have to have DropBox on your PC and the free DropBox app on the iPad to use DropBox to transfer files.
To send the file using DropBox - make sure DropBox is running on your computer. Then place the file in one of the folders that you have set in your DropBox folder on your PC. Launch DropBox on your iPad and find the folder that you placed the file into and tap on that folder. Find the document and tap on it. It will open in the window on the right. Tap the arrow icon in the upper right corner and select Open in Pages.
If you have pdf files in iBooks that you want to put into Pages you have to email them to yourself and use the Open In feature when you open the email. You cannot send a file from iBooks other than to email it - at least I am not aware of any other way.

How to Insert Image in a Column of a table

Hi
I have read several documentations but still could not find any relevant one that can help me in inserting a image in a BLOB column of a table.I have read about DBMS_LOB but still not clear how to insert an image in the table.
I followed following steps :
create table Emp_Identity(Id Number,Photo BLOB);
Insert Into Emp_Identity(1,'d:\vishal.bmp');
Please tell me steps to be followed.
Regards
Vishal Chaudhry
null

I am using Developer 2000 Forms 6i as Front End (Oracle 8.1.6)
My table structure is:
SQL> desc test_lob
Name Data Type
ID NUMBER
NAME VARCHAR2(100)
PHOTO BLOB
SOUND BINARY FILE LOB
IS there any way to display the BFILE contents on the frontend.....?
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by vishal chaudhry ([email protected]):
Hi,
I could actually insert an image in a BLOB type column from the backend(Sql plus) not directly but by using BFILE and see that image on the frontend (Forms 6i Developer 2000,Item type is Image as there is nothing like BLOB/BFILE in front end) using the following procedure :
IS there any way I can insert an image directly in a BLOB column from the backend rather than using BFILE?
CREATE OR REPLACE PROCEDURE loadLOBFromBFILE_proc IS
Dest_loc BLOB;
Src_loc BFILE := BFILENAME('SOUND_DIR', '123w.bmp');
** SOUND_DIR is a logical directory created by giving path of the server
** Create Directory SOUND_DIR as 'd:\u020\o816\ctx\test'
** d:\u020\o816\ctx is the physical path of the server \\pslndb\ctx$
** test is the dummy testing directory created on the server
** 123w.bmp is lying in the test directory
Amount INTEGER ;
BEGIN
Amount := DBMS_LOB.GETLENGTH(Src_loc);
SELECT photo INTO Dest_loc FROM test_lob
WHERE ID = 1
FOR UPDATE;
/* Opening the source BFILE is mandatory: */
DBMS_LOB.OPEN(Src_loc, DBMS_LOB.LOB_READONLY);
/* Opening the LOB is optional: */
DBMS_LOB.OPEN(Dest_loc, DBMS_LOB.LOB_READWRITE);
DBMS_LOB.LOADFROMFILE(Dest_loc, Src_loc, Amount);
/* Closing the LOB is mandatory if you have opened it: */
DBMS_LOB.CLOSE(Dest_loc);
DBMS_LOB.CLOSE(Src_loc);
COMMIT;
END;
<HR></BLOCKQUOTE>
null

How To Insert Data into a Access Database from a PDF File

Hi All,
Could anyone help me to insert PDF form data to an MS Access database.I am new to this and I would appreciate if anyone can help me at the earliest.
Thanks,
Deepti

You can submit your PDF to a server-side script (ASP/PHP), and store the new record in a MS Access database.
For more information on how to store your PDF submission in a database, please visit:
http://www.fdftoolkit.net

How to insert a picture into excel file using ALE AUTOMATION

Hi every body,
I have to write report that export data from abap to exel the data contain a logo but I don't know how to insert picture to excel using ALE AUTOMATION.
Please help me!
Thank you!

Hi,
you have to join into SAP Code Exchange and download this zip:
[ABAP2XLSX_daily.nugg.zip|http://code.sdn.sap.com/spaces/abap2xlsx/documents/btFzHQ3vKr36tCeJe7bhNc/download/btFzHQ3vKr36tCeJe7bhNc]
Regards,
Ivan

How to insert a number using ADO or OLEDB by oracle provider

I create a talbe .
Create Table A
(id number(7));
I use ADO to access the table a;
_ConnectionPtr pConn=NULL;
pConn.CreateInstance(__uuidof(Connection));
_RecordsetPtr pRst=NULL;
pRst.CreateInstance(__uuidof(Recordset));
pConn->Provider="OraOLEDB.Oracle.1";
try
     pConn->Open("","ISVISION","ISVISION",NULL);
     pRst->CursorLocation=adUseClient;
     pRst->Open("A",pConn.GetInterfacePtr(),adOpenStatic,adLockOptimistic,adCmdTable);
     pRst->AddNew();
     pRst->Fields->Item[0L]->Value=100L;
//It raise a exception,why?
//If I convert the datetype of "ID" to CHAR(7)
//and pRst->Fields->Item[0L]->Value=L"100",it is ok.
     pRst->Update();
     pRst->Close();
     pConn->Close();
catch (_com_error& e)
     MessageBox(e.Description(),"error",MB_OK|MB_ICONWARNING);
     return ;
if (pConn)
pConn.Release();
if (pRst)
pRst.Release();
I create a table Aã
create table A
     ID number(7)
Now ,I use OLE DB to access the table A;
struct CIsA
     CIsA()
          memset(this, 0, sizeof(*this));
public:
     DB_NUMERIC m_ID;
     BEGIN_COLUMN_MAP(CIsA)
          COLUMN_ENTRY_PS(1, 7, 0, m_ID)
     END_COLUMN_MAP()
DEFINE_COMMAND(CIsA, _T("SELECT ID FROM A"))
CDataSource DataSource;
HRESULT hrt=DataSource.Open(_T("OraOLEDB.Oracle.1"),NULL,_T("ISVISION"),_T("ISVISION"));
CSession Session;
hrt=Session.Open(DataSource);
CDBPropSet propset(DBPROPSET_ROWSET);
propset.AddProperty(DBPROP_IRowsetChange, true);
propset.AddProperty(DBPROP_UPDATABILITY,
     DBPROPVAL_UP_INSERT | DBPROPVAL_UP_CHANGE | DBPROPVAL_UP_DELETE);
CCommand<CAccessor<CIsA> > Command;
Command.Open(Session,NULL,&propset);
tcscpy((TCHAR*)Command.mID.val,_T("1245"));
Command.m_ID.sign=1;
hrt=Command.Insert();//It is wrong,why?
Command.Close();
Session.Close();
DataSource.Close();
In Fact,the two problems is the same. The key of problem is how to insert a number into oracle.
help me! thank you.

hi
create a table something like this.
create table image(
Image_Id number(5),
Image    blob);create a form with the same table and use the following code.
when-button-pressed trigger.
read_image_file('c:\image_name.jpg' , 'jpg' , 'image.image');if its correct/helpful please mark it thanks.
sarah

Help - How to insert onto a tape...

Similar Messages

Maybe you are looking for