Help in design ace "waas"

I designing a waas solution and ace interception and i found some issues i attached simple topology for the network it has 150 branch and we will implement waas in 6 branches as start the topology has 2 6500 each with 1 ACE moduel .
1.as start i know that i shoul make 3 vlans one for server & 1 for WAEs and 1 for client i don't have problme in servers or WAEs my issue is branches connected to 6500 directly via serial so i can't make vlan for client to apply load balance service policy on it i need to apply it to serial interfaces directly
can i do that with ACE for example in case of client Vlan i was assign vlan to ACE do i need same thing for serial interfaces?
2.should i configure default gateway for core WAE on interface vlan500 of 6500(which contain WAEs).
3.I didn't configure fallover 2 ACEs that mean sepearet vlan for right WAes and one for left so will that cause any problme note that some branchs connected to each other i'm talking about asymitric routing.

Usama,
Are you configuring ACE in bridged or routed mode? I have attached 2 sample configurations, depending on which mode you are using.
Answers to your questions:
1. The service-policy is applied on the Vlan interfaces created on the ACE module, not on the Vlan interfaces created on the MSFC.
2. In the examples I attached, the default-gateway for the WAEs in the Vlan interface on ACE where the WAEs reside.
3. You need to ensure that ACE (and WAAS) see the traffic symmetrically. I would recommend configuring the ACE modules in a redundant pair.
Zach

Similar Messages

  • Help in designing a Query

    Hello Everyone,
       I want you help in designing a query that involve OACT,OJDT,JDT1,OBGT and BGT1
    Actually I want a report that shows accounts Budget quarterly and its expenditure quarterly as well..
    Like shown below
    Account Name
    Budget from Jan to March
    Budget from April to June
    Budget from July to Sept
    Budget from Oct to Dec
    Expenditure from Jan to Mar
    Expenditure from Apr to June
    Expenditure from July to Sept
    Expenditure from Oct to Dec
                     Parameters would be Fiscal Year and Date range and Account name
    Can anyone please help me out in that one
    Thanks in advance

    Looking at the test data I have in these tables, it would appear impossible to join them all in one query without using UDFs...
    They don't share any columns.

  • Helping in Designing Scenario

    Hello people!
           i need some helping in designing a solution,  i'm kinda new in the PI world, and i never made BPM stuff and so...
          Here is my situation, i have 2 Webservices that i have to consume in PI
         R/3 will send information to PI
          in PI i have to Consume the first Webservice with some information and that will Response a Token,
    then i have to Merge this Token with another XML message and send to another Webservice, the i get the Response Message of this webservice and send back to R/3
        whats the best way of doing this? is it using BPM?
    this is the two Webservices i will have to use:
    http://siatepqa.suseso.cl:8888/Siatep/WSToken?wsdl
    http://siatepqa.suseso.cl:8888/Siatep/WSIngreso?wsdl
    Can anyone help me?
    Thanks!
    Edit:
    i've already read alot of BPM topics and  i think this is the way... but i'm not sure
    i want to use abap_proxy conection in r/3 > PI and the webservice connections will use SOAP/WS
    Edited by: pitoshi on Jun 9, 2010 10:57 PM

    Liang Ji,
    thanks  very mutch for your answer, this is very helpfull,
    But in:
    "R/3 send message to PI via Outbound proxy (using XI Adapter) ---> PI receive Message and execute Mapping program --> during the mapping program, you can have SOAP lookup to call first web service to get token, then you can use lookup value in your mapping, ---> Use SOAP receiver adapter to call first web service, then PI get response from it, then pass to R/3. "
    You mean " ---> Use SOAP receiver adapter to call first web service, then PI get response from it, then pass to R/3. ""
    call the Second Webservice?
    in spite of my difficulties with BPM, is this solution is better than using BPM?
    Edit: * and if any of these processes do not respond? how I treat it? *
    anyone else have any other option or tips to this scenario?
    Edited by: pitoshi on Jun 10, 2010 12:34 AM

  • How can I turn off the pop-up "Help HP Design Products You Want"? (8600 printer)

    The pop-up window "Help HP Design the Products you want" keeps returning every 5 minutes all day long
    regardless of how I respond to it!  Can this be turned Off?
    This question was solved.
    View Solution.

    What printer are you using?
    What OS do you have?
    Does it give a program name when it pops up, or does it just give you that message and a couple of options to choose from?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Digital Publishing Suite Help | Layout design overview

    This question was posted in response to the following article: http://helpx.adobe.com/digital-publishing-suite/help/layout-design-overview.html

    Great Video.
    Can you have two 15 page docs for Horz and Vert formats marry them in folio, so that article 1 has a Horz and Vert orientation,article 2 the same and so on and so on right up to article 15?
    Right now it seems like I would have to break the two docs into 15 individual docs each to accomplish the Horz and Vert orientation.

  • I am making a Conference/Event program book.  Are there mac programs or apps that could help me design this?

    I am making a Conference/Event program book.  Are there mac programs or apps that could help me design this?

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Help me design certificate services

    Hi  i  am planning ADCertificate Services with PKI and we are going to come up with 2 data centers. Each data center has 2 domain controllers. I would like to come up with Two-Tier CA Hierarchy. Is this the right approach if certificate services
    will be hosted on three machines, the offline Root CA wll be a physical machine in datacenter2 with one second tier CA in each data center as a virtual machine. please help me design certificates services if i am going wrong.

    first of all thnx for ur reply! actually you are some what right, but what i want is that a client comes and right like this for e.g; sqr(log(sin(n)))
    then this will first go to sqr server , then to log and at the end to the sin server which means that sin server will first return the value of the n to log and after the log is computed on the value which was return by the sin server, it will go to the log server and in the end the log server returns the log of that value to the client, as this phenomenon is called grid computing. this is the what i want...
    now, where i m stuck is that i know how to make a server and a client .. but i dont know how will i interact one server to the other and returning back the value ... pls help me with some coding of this or any tutorial if u have .. i will be vary glad if u help me in this i will really appreciate your corporation!
    thank you! waiting for ur reply
    Danish

  • Please help in designing...

    Hey Folks,
    A new bee to Flex...Want to design and develop a flexible GUI in flex..Can any one help in designing the GUI?
    Requirements
    Database
    I have four tables namely TableId, ColumnName, ColumnValue, PartyColumnValue
    TableId
    tableId int
    tableName  varchar
    eg :-
    10
    Test
    ColumnName
    columnId int
    tableId int
    columnName Varchar
    eg:-
    1001
    10
    Col1
    ColumnValue
    valueId int
    columnId int
    tableId int
    valueName Varchar
    eg:-
    100101
    1001
    10
    val1
    PartyColumnValue
    id int
    valueId int
    columnId int
    tableId int
    In the above manner I am storing the table names, column Names and column values
    Flex Requirement(GUI)
    On GUI there will be one combobox in which user has the option of selecting the table name
    Once table is selected
    1. Dynamic Table(DATAGRID in flex) should be displayed on GUI in which the columns will be the column name from the ColumnTable and each row should be the combobox in which the values will be multiple pertaining to the ColumnId and tableId.
    2. Each row should be having the option to "save" individual row means the last column will be save button, it will get persisted in the PartyColumnValue table.
    3. There should be option to save all the rows means "Save All" button to save all the rows it will get persisted in the PartyColumnValue table.
    4. Once i saved the invidual row or all rows and then again if user selects the table from the combobox he should be able to see the persisited values.
    5. There should be one "Add Column" button which will add the column by opening the popup and asking for the default values.
    Can anyone help me in acheving this functionality?
    Thanks In Advance!!!

    Can anyone help without money?

  • Help needed to create Drop down help through Design layer for attribute

    Hi All,
    Has anybody created a Dropdown help through Design layer for standard field, there we have check Box ............
    Please Help me to know this ASAP....
    Edited by: Pankaj Gupta on Feb 26, 2010 10:52 AM

    Hi,
    Here is the exampel Program, i am sending the code for a Paramter, If you want this for the Select-options, then you need to have the paramer name as PS_PARM-LOW and you need to write the smae logic again for PS_PARM-HIGH to get the List box for the select-option
    REPORT ZLIST.
    TYPE-POOLS: VRM.
    DATA: NAME  TYPE VRM_ID,
          LIST  TYPE VRM_VALUES,
          VALUE LIKE LINE OF LIST.
    PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
    AT SELECTION-SCREEN OUTPUT.
    NAME = 'PS_PARM'.
    VALUE-KEY = '1'.
    VALUE-TEXT = 'LINE 1'.
    APPEND VALUE TO LIST. VALUE-KEY = '2'.
    VALUE-TEXT = 'LINE 2'.
    APPEND VALUE TO LIST.
    CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    START-OF-SELECTION.
    WRITE: / 'PARAMETER:', PS_PARM.

  • Help in designing SQL

    Hi All,
    I need little help in designing SQL. My input and output data is given below:
    Input
    Key
    Date_1
    Date_2
    Key1
    2/14/2011 5:22:35 PM
    2/22/2011 3:05:13 PM
    Key1
    2/24/2011 1:48:07 PM
    5/24/2011 4:50:16 PM
    Key1
    2/24/2011 1:48:59 PM
    4/25/2011 3:36:19 PM
    Key1
    5/24/2011 5:18:19 PM
    6/16/2011 3:17:40 PM
    Key1
    6/16/2011 3:25:42 PM
    6/24/2011 1:33:13 PM
    Key1
    6/17/2011 1:12:54 PM
    6/25/2011 5:55:55 PM
    Output
    Key
    Date_1
    Date_2
    Key1
    2/14/2011 5:22:35 PM
    2/22/2011 3:05:13 PM
    Key1
    2/24/2011 1:48:07 PM
    5/24/2011 4:50:16 PM
    Key1
    5/24/2011 5:18:19 PM
    6/16/2011 3:17:40 PM
    Key1
    6/16/2011 3:25:42 PM
    6/25/2011 5:55:55 PM
    Here out of 2nd and third record of input, output is 2nd record of output and 5th and 6th record of input would come out as  4th record of output. Basically, if we overlapping duration between Date_1 and Date_2, we need to take min of Date_1 and max of Date_2 for that overlapping records. In case of no overlapping, we would simply output input record like  record 1 and 4 of input.
    Out of
    Key1
    2/24/2011 1:48:07 PM
    5/24/2011 4:50:16 PM
    Key1
    2/24/2011 1:48:59 PM
    4/25/2011 3:36:19 PM
    2/24/2011 1:48:07 PM was  min of above 2 and 5/24/20114:50:16 was max of above 2.
    Similarly in other overlapping scenario:
    Key1
    6/16/2011 3:25:42 PM
    6/24/2011 1:33:13 PM
    Key1
    6/17/2011 1:12:54 PM
    6/25/2011 5:55:55 PM
    6/16/2011 3:25:42 PM  was min of above 2 and 6/25/2011 5:55:55 PM was max of above 2.
    Pls help.
    Thanks.

    Hi Frank.,
    The above logic with NVL is not working.
    My input sample is:
    Key
    Date_1
    Date_2
    Key1
    2/14/2011 5:22:35 PM
    2/22/2011 3:05:13 PM
    Key1
    2/24/2011 1:48:07 PM
    5/24/2011 4:50:16 PM
    Key1
    2/24/2011 1:48:59 PM
    Key1
    5/24/2011 5:18:19 PM
    6/16/2011 3:17:40 PM
    Key1
    6/16/2011 3:25:42 PM
    6/24/2011 1:33:13 PM
    Key1
    6/17/2011 1:12:54 PM
    6/25/2011 5:55:55 PM
    I am giving create and insert statement below for creation of above data. Please see if you can help me:
    CREATE TABLE test1
      KEY1          NUMBER     ,   
      DATE_1               DATE ,          
      date_2              DATE
    insert into test1
    values(1, TO_TIMESTAMP ('2/14/2011 5:22:35 PM', 'MM/DD/YYYY HH:MI:SS AM'),TO_TIMESTAMP ('2/22/2011 3:05:13 PM', 'MM/DD/YYYY HH:MI:SS AM')  ) ;
    values(1, TO_TIMESTAMP ('2/24/2011 1:48:07 PM', 'MM/DD/YYYY HH:MI:SS AM'),TO_TIMESTAMP ('5/24/2011 4:50:16 PM', 'MM/DD/YYYY HH:MI:SS AM')  ) ;
    values(1, TO_TIMESTAMP ('2/24/2011 1:48:59 PM', 'MM/DD/YYYY HH:MI:SS AM'), '' ) ;
    values(1, TO_TIMESTAMP ('5/24/2011 5:18:19 PM', 'MM/DD/YYYY HH:MI:SS AM'),TO_TIMESTAMP ('6/16/2011 3:17:40 PM', 'MM/DD/YYYY HH:MI:SS AM')  ) ;
    values(1, TO_TIMESTAMP ('6/16/2011 3:25:42 PM', 'MM/DD/YYYY HH:MI:SS AM'),TO_TIMESTAMP ('6/24/2011 1:33:13 PM', 'MM/DD/YYYY HH:MI:SS AM')  ) ;
    values(1, TO_TIMESTAMP ('6/17/2011 1:12:54 PM', 'MM/DD/YYYY HH:MI:SS AM'),TO_TIMESTAMP ('6/25/2011 5:55:55 PM', 'MM/DD/YYYY HH:MI:SS AM')  ) ;
    commit;
    Expected output would be:
    Output
    Key
    Date_1
    Date_2
    Key1
    2/14/2011 5:22:35 PM
    2/22/2011 3:05:13 PM
    Key1
    2/24/2011 1:48:07 PM
    Key1
    5/24/2011 5:18:19 PM
    6/16/2011 3:17:40 PM
    Key1
    6/16/2011 3:25:42 PM
    6/25/2011 5:55:55 PM
    Thanks....

  • Design help related to ACE to Switch connectivity using Port-Channel

    Hi,
    I have a Cisco ACE 4710 configured in One-Arm mode. This ACE is getting connected with 2 3750 switches. These 2 3750 switches connected in trunk mode.
    ACE is connected to these 3750 switches using Port-channel.
    ACE Config:
    ================================
    interface gigabitEthernet 1/1
      description One-arm mode port to DMZ Switch 1 port 20
      channel-group 1
      no shutdown
    interface gigabitEthernet 1/2
      description One-arm mode port to DMZ Switch 2 port 20
      channel-group 1
      no shutdown
    interface port-channel 1
      switchport access vlan 51
      port-channel load-balance src-dst-ip
      no shutdown
    interface vlan 51
      ip address 10.40.56.131 255.255.255.128
      access-group input everyone
      access-group output everyone
      nat-pool 1 10.40.56.215 10.40.56.215 netmask 255.255.255.255 pat
      service-policy input LB
      service-policy input remote-access
      no shutdown
    ===========================================================
    The problem is that 3750 switches are not stacked.
    Application is working fine. But i am getting a lot of MAC flapping messages..
    kindly suggest whether this design is OK or something needs to be done to rectify it...
    Attached a small diagram..

    Hello acharyr123,
    I don't think this design is ok, and it would cause mac flapping since the two indepedendent 3750 switches will learn the ace mac addresses off of two different interfaces.  The 3750s would have to be stacked so that they would act as one switch then this should work correctly.
    Thanks
    Joel Lamousnery
    TAC CSE

  • Recommended Design for WAAS in both Data center and Branch Offices

    Hi All,
    I need to purchase different appliances for WAAS, but before I decide what to purchase, I need to know exactly how I am going to put these devices so that I can know which one to purchase and how the designs will be.
    My environment is as follows:
    I have two core routers (ASR 1000 series) at Data center, two 6509 switches (expecting to insert the ACE module, and FW module) and the I have access switches which connects servers.
    At the branch offices, I am expecting to place ASR1000 series also.
    Now, I need to know the recommended designs for these WAAS appliances so that, I can know in advance what to purchase(i.e. how many WAAS CM, Core WAE, and Edge WAE).
    Any input will highly be appreciated.
    Thanks,

    If you purchase the Standard Edition, your license supports:
    One installation of Cisco Security Manager on one Windows-based server.
    The configuration or management of 5 devices (in the Standard-5 option) or 25 devices (in the Standard-25 option). This excludes Catalyst 6500 and 7600 Series devices and their associated service modules.
    If you purchase either the Standard-5 or Standard-25 license, you cannot purchase an incremental device license. Your license is fixed at either 5 or 25 devices.

  • Need Help: Query Designer

    Hi experts,
    In Query designer, is it possible to create an IF statement for "IRRATIONAL NUMBERS"?
    Lets say 10.03, 1.26, 3.1 and so on...
    The statement would be as follow:
    If Val1==N.x then 0 else Val1.
    To summary, if the value is N.x (N for rational numbers 1,2,3,... and .x for decimal values like .23, .44, .01 and so on...),
    then the value N.x will be changed or converted into "0".
    Example: If the value of FieldA on the report is 10.3, it then should be converted into Zero "0".
    another is if value is 1.03, then the report should show 0 instead of 1.03
    I arrived to a solution wherein I have to create three logic expression.
    First is to convert first the Irrational Number into Zero "0".
    Second is to create new selection in KF wherein it will pull the data containing the converted "N.x to Zero".
    And third is to create the IF statement logic that will satisfy my expected value.
    I'm having this problem on the first one as I have no idea how to convert irrational number into zero "0" value.
    the second and the last part would be fine as my main problem here is how can I convert the irrational number in to zero?
    Any suggestions?

    Hi,
    Please try the below.. Hope this will solve your issue
    Eg. of data
    Dist. Channel  -
    Value
    Dom1----100.5
    exp1----200.4
    dom2---50
    exp2---75
    Expected out put
    Dist. Channel  -
    Value
    Dom1----0
    exp1----0
    dom2---50
    exp2---75
    Steps1
    Drag and drop Dist.Channel in row and value in colum
    create a formula1 using ur kf value 
          CEIL(value)    --- which will provide us integior part with out decimal
    Steps2
    create another fomula2
    using boolean operator compare the value
    (formula2==value)*value
    this formula compare our two values and will produce a boolean value ie 1 or 0
        :  Eg 100.5  ceil(100.5) = 100  Now in our formula1 we are comparing these two values are equal or not ie 100.5 - 100 so out come will be 0 then 0100.5 = 0 always if our condition is true then 1100 = 100
    Related Links :
    Boolean Operator
    http://help.sap.com/saphelp_nw04/helpdata/EN/71/0aec3b6e011341e10000000a114084/frameset.htm
    Thanks
    BVR

  • About (not) getting help for Design Premium CS4 [very long post]

    If what i've heard on numerous occasions is true, and I really hope it is, Adobe spends a lot time, energy, emotion and effort on their Customer support system. In an effort to provide a bit of insight "from the trenches" I've spent the last hour sifting through Adobe's website trying to find an email where I could send a bit of critique regarding the quality of Adobe's Tech Support and I've come to the conclusion that these forums are a paying customer's only outlet. As part of my job training, I take a lot of notes whenever anything gets done over the phone. This then is a full transcript of the arduous process I had to go through in order to try and fix the infamous "licence has expired" issue. I'm not necessarily looking for feedback, I just want somebody at Adobe to see this and realise how much money is being wasted on a very dysfunctional "Support Service".
    Adobe tech support notes:
    How can the ball be dropped to this extent?
    Friday, April 2nd
    10:00   Installed the suite on the office's new design computer after using the trial editions until they expired. None of the programs in the suite will run because the licence is "expired".
    11:30   Not knowing if it might somehow be related to there being leftover files from the trial editions (which I didn't uninstall) I uninstall everything and install again.
    13:10   I receive the same error message. Tech support principally led to a waste of a day due to the way that Adobe's databases seem to catalogue customers. According to Jay Lopez, our suite wasn't registered to my boss (Doc) it was registered to Ken Schoepp, who hasn't worked here in about 8 years, since he was one of the earlier names connected to this address. It took about 2 hours and 2 transfers to figure this out.
    15:30   I finally get transferred to tech support.
    15:51   TS answers.
                It takes 2 hours to assess what the problem is and suggest that I should do a full uninstall and reinstall of the suite, regardless of the fact that I did that before calling TS. 2nd installation fails to solve the problem whereby the suite won't load up (as expected).  I'm given some instructions as to what files to remove that may contain registration information and could possibly prevent the program from running. Tech support hangs up as their shift is soon over but they assure me that this thrid installation of the day should fix the problem. To speed up the installation I copy the files onto the HDD.
    17:15   For some unknown reason, Setup.exe crashes crashes at about 65% of initialisation. That's right, the installer can't even run!
    Tuesday, April 6th
    8:37     Calling TS
    8:45     Don answers
    8:51     Get informed that I was somehow routed to CS instead of TS. The case id I provided requires solutions that he can't provide,           Don will transfer the call to TS.
    8:53     Jitesh gives me a new case id before putting me on hold as he reads the case file.
    9:05     Informs me that since my call deals with an installation issue I need to be transferred to another department. In response to           my comment that I've already been misrouted twice today Jitesh says he will contact the department personally in order to           transfer me more quickly as I'm already in their service.
    9:13     Just before hanging up Jitesh mentions that there are only 12 calls ahead of me in the queue.
    9:19     Rohan Subba answers.  After reading the file he asks if I would accept sharing my desktop in order for him to look at the root             of the issue using Acrobat Pro Meeting.
    9:26     With files installed, logging in to "adobesupport.na5.acrobat.com" as guest.
                As things are not working as expected, Rohan places me on hold as he goes to look up solutions.
    9:31     Back from checking resources, try them out, still don't have access to some files due to lack of permissions.
    9:36     Comes back with instructions on how to setup the Windows7 super admin account which should give me full access to the             locked out files.
    9:42     Logged in as admin. More hair pulling as we try to configure the permissions properly.
    10:02   File sharing finally works and he downloads the installation log files. As we attempt to change permissions to access other            files I ask why it is has taken 13 hours of TS and 4 techs before someone suggests using Adobe Connect Pro Meeting since it            seems like a great way to gain access to files. Rohan's answer: Due to the solution chain, TS had to try other options           before going for the ACPM.
    Over the next hour we try various things to get rid of the files that are blocking the re-installation of Premium Suite. I'm instructed to download the "Windows Installer Cleanup Utility" and "adobeCS3cleanscript" even though I'm running CS4. The trial versions I was using were also CS4. I'm assured that the CS3script works just fine for CS4 removal. It gets run with option 1, once, and twice with option 2, rebooting between each pass.
    11:01      Realisation sets in.  "I'm sorry, I cannot resolve this issue and I will escalate your call to Tier 2 TS". Initially he asks           if Thursday is good for the follow-up call but I inform that I will not be there on that day and that I am the only one at the office           who can handle these types of technical calls.
    11:05     Comes back on the line and informs me that T2 TS will contact me on Friday.
    Spent the remainder of the day reading online, chasing possible solutions.  Found out about a hidden option 3 for Cleanscript, run it twice, still no improvement. Having been shown the location of the installation log I sift through it and research 1) where each of the offending registry key is, 2)  how to change permissions to the offending keys so I can delete them. Thanks to google and other people who've had the same issues I'm having and followed by blogging about it.
    In total, 22 registry keys blocked the installation. Because each key would cause the installer to lock up and quit It took 6 hours to run the installer 22 times until it crashed in order to find and eliminate each one. When they were all taken care of, only 4 Premium suite modules wouldn't install: Flash, Flash Player, Acrobat and Air.
    Progress at last.
    Thursday, April 8th
    Mesum, a resolution specialist, calls work asking to speak to Doc about our case. According to him there is no mention of a contact person (me) or a date for a call back. When asked probing questions about these discrepencies Mesum says that seeing as how Adobe TS are trained to exacting standards and that note taking is a very important part of the job there is no way that this break down happened on their end. If the information my boss is referring to is "not in the file" then it MUST be false. The obvious answer, according to Mesum, is that whoever made the appointment with Adobe didn't take down good notes. As a T2 specialist he "...makes it a point to always return the call at the arranged time".  I don't have the notes regarding everything that was said that day but from talking to Doc on the following day I gather that Mesum made other comments to bring into doubt the quality of Aararat's (the company I work for) training, their note taking skills and the quality of their employees. Not once did he take any hint of responsibility for the communication screw-up. Mesum will be calling me back on the Friday (as was originally written down in our file) and provides a new case id before hanging up.
    Friday, April 9th
    12:01     Mesum call and wastes no time in trying to resolve the issue. I inform of the progress I made yesterday (independently).
    12:08     Error :2 shows up again.  Instructs me to clear the temp folder, the cache and to verify that the print spooler           service is enabled. It is.
    12:21      While the system is rebooting, Mesum mentions that the "very detailed conversation" he had the previous day and asks if           I have been briefed about it. I explain that I have been briefed (neglecting to mention that I am the one who made the              appointment and took copious notes about all my TS conversations, including this one) and that I hoping to get this issue           resolved once and for all.  Mesum makes a grandstanding comment about how "he makes it a point to always return the call at           the arranged time as these calls are very important and it is crucial that they get resolved". He then goes on about the           lenghts Adobe has gone to in order to create a support chain to make sure that if an issue is unresolved on either end of the           chain, that this lack of resolution can be tracked down.
    Error:2 indicates that we are still having registry blockage issues. In response to my question whether there might be a full list of the registry keys that Adobe Premium suite injects during an installation Mesum responds that techs have been given very strict and specific instructions about tampering with the   windows registry (which is odd considering 3 days prior a tech dove right into     registry editing) he proposes that I instead uninstall Flash, Flash player and Adobe Air.
    13:07   Since the uninstaller won't run for just the 3 modules, Mesum asks that I   uninstall everything once again. I am then to only           start by installing Acrobat first, and only Acrobat, before installing the rest of the suite. Because this process will take a long           time and Mesum has other calls to make he leaves me to this numberless installation being fairly certain that this will solve the           issue. He adds that such problems are very frequent with Acrobat. Should his proposed course of action not solve the issue I           can type up a follow-up response by going to www.adobe.com/go/supportportal. I am to expect a follow-up call on Monday.
    13:22   Because I was really not looking forward to going through another round of uninstalling and reinstalling, I attempt to run flash             one last time prior to starting the cycle. Run into error:5
                reboot
    13:29   Error:5 again.  Time to uninstall once more.
    13:35   Error while uninstalling. Nothing to do but click continue and see how it goes.
    13:53   Uninstall finished with problems, running it again. Adobe Sing is still showing as   an installed component.
    13:55   Uninstall with errors. Flash Plug-in will not uninstall. Running Uninstaller again.
    13:59   Uninstaller fails again.  Decide to go and manually delete files and folders inspecting each one by one.
    Spent the rest of the afternoon going through the install logs like I did on April 6th, unlocking ownership and deleting corrupted keys one at a time.
    18:08   The whole Suite finally installs except for Flash and Indesign.
    18:47   After hunting down more keys, the installer completes with errors but at least all the programs are installed.  Acrobat, Air, Flash plug-in are still not installed properly.
    Monday, April 12th
    8:20     Call tech support
    While on hold I try to find my ticket on the support portal using the case id's I've been given. None of them show up on the system. Basically, I'm stuck to using phone support.
    9:23     TS answers. Sanjay
    9:28     After Sanjay has verified the case id, I provide him with an update to the file regarding what I've done since I hung up on Friday, describing the new issues.
    9:34     Placed on hold
    9:42     Comes back and explains that this issue will require more consultation with his seniors. To make sure that he looks up the            right issue I repeat the exact problem I would like him to research. Three times he repeats the information back to me just a           little differently. Finally on the 4th repetition of the problem I'd like addressed he "gets it" and thanks me for "providing that           pertinent information". 
    What I don't understand is that I repeated the same information that he repeated back to me 4 times before he seemed to understand what his notes told him he should be researching. From the heaviness of his accent I suspect that their was a bit of language barrier here.
    9:48     Places me on hold
    9:59     Comes back with a possible solution.
    10:08   As his solution requires me to delete files I don't have access to due to lack of permissions, his solution can't be applied. He places me on hold.
    10:11   Comes back, with another possible solution.
    10:17   Still not working. I ask how I can change administrator settings for specific files    and he needs to go check articles again.           Shouldn't this type of knowledge just come off the top of his head if he's in TS? Sanjay just walks away at this point,           not asking to put me on hold nor placing the call on hold. I can hear conversations in the background the whole time.
    10:24   Comes back, thanking for staying on hold (even though I wasn't). This time he asks me to look for specific adobe folders. I           can't delete them because I'm supposedly not an administrator, even though I'm logged in using the enabled super-admin           account. He tells me I need to type a very specific command at the command prompt to reset the admin account. I thought           that's what he was going to research the last time he left so I ask what I have to type at the command line to do this. Sanjay           doesn't and asks if he can put me on hold again. I politely and calmly answer that no, I don't want to be put on hold. Every time           I've asked him a question he's had to go in order to talk to his seniors (as he calls them). If possible, why not escalate my call           and put me in touch with one of these seniors or a manager in order to minimise the amount of time I will be placed on hold. He           puts me on hold.
    10:34   Ashima comes on the line. Unlike Sanjay, she sounds confident and authorative.
    10:44   After discussing what I'm trying to do she informs that not being able to delete files and folders is a Windows issue, not an           Adobe issue. Even after I mention that a previous tech had helped me solve a similar problem in the previous week and try to           reason that since it's Adobe uninstaller that caused this issue she sticks to her claim that it's a Windows issue and that she           cannot help me resolve the issue. I am to contact Microsoft tech support in order to get help with this issue.
    12:17   Call Microsoft technical support
    12:23   Jacqueline answers. I describe the problem I'm having with managing permissions in Windows 7 and that I've been told that I           resetting the admin account should solve this problem. She seems to agree and asks for my Windows serial number before we           can start working on the issue. Upon finding out that I have an OEM version of Windows, Jacqueline informs me that I have 2           options: look online or pay 59$ per call on credit card for support as free support is not provided to OEM licences since they are           typically only installed by resellers and   assumed to be serviced by them. Sadly, this is not my case.
    12:31   Having repeated my options back to Jacqueline to make sure I understood her correctly I inform her that I will terminate the           call since I will not be paying for paying and therefore will go online for help. She sounds surprised at how quickly I made           my decision, wishes me good luck and the call is ended.
    13:30     Started researching a solution. I find what I need to know and apply it, managing to reclaim ownership of the files and           folders. Run the installer again and everything installs now except for the Acrobat, Air and Flash plug-in.
    Tuesday, April 13
    15:30   Since I haven't received a call back from Mesum I try to find our case information on the Adobe Support Portal. I figure that           Mesum probably needed me to contact him prior to today in order to confirm whether the solution worked or not. Logging in           with the email address we used to register our software and log our support calls is unsuccessful. Either the password is wrong           or the email is not active. Seeing as we have 2 other office emails with which Adobe products have been registered over the           years I log on with them to see if we have pending cases on either of them. negative. Just to test something out I attempt           logging in to the original email from another computer.  While I can't log in I no longer get the message that the email isn't           related to an active customer account, just that the password is wrong. Resetting password. Still can't login.
    16:06   Starting LiveChat with Adobe to see if they can help. On hold.
    16:12   Connected. explain the situation.
    16:19   Says the password is reset from their side. Try it and doesn't work.
    16:22   I tell Live Chat the reset didn't work, and wait for response.
    16:29   He assures me it's been reset and that I should try again.
    16:30   Try it to connect via two other computers. Fail. Inform him again. Wait.
    16:36   Informs me I will need to call Phone Support. I ask if he can connect me.
    16:38   No, he cannot connect me. There is no Live Chat Tech Support. Due to the amount of lag between responses I ask if how many           chat sessions he works on at the same time.
    16:41   Answer: three at a time.
    16:45   Finish typing comment and suggestion about possibly reducing that number because the amount of lag time for simple           requests is just too much.
    16:46   Final response and goodbye.
    16:47   Call Phone Support
    16:50   Jerry in the Philippines.  I explain the issues I've been having with our account and the failure to reset the password. Jerry puts a note in the file and that he'll look into it.
    16:58   Puts me on hold as he goes to explore.
    17:01   Comes back, can't see any issues. Asks me for permission to logon to the client account by using our email and password. I           accept. He logs on and sees that there are in fact no pending cases that show up in our client account, even though we have           multiple concurrent case id's showing on his side. He says he'll look into it.
    17:07   Client login issue is unresolved but at least I'm getting transferred to TS.
    17:23   Panpaj answers. I explain the situation and provide case id.
    17:38   He provides a new case id. I have to describe the whole case history.
    17:46   On hold.
    17:52   Turns out I was transferred to the Acrobat specific TS. Seeing as how my installation problems aren't dealing specifically           with Acrobat he can't help me. He will   transfer me to general TS.
    18:16   Animesh answers. explain the situation and provide case id.
    18:20   Puts me on hold as he reads the file.
    18:22   Repeats the problem as described according to the file.
    18:30   Puts me on hold as he goes to find articles.
    18:36   Asks me to share the desktop. Connecting to connectteam.acrobat.com
    18:44   Upload of log file complete, reading over it.
    18:48   Sharing screen caps of installation error messages.  I've been thoroughly documenting each and every single one. Instructs me           to download and AdobeCS4cleanscript. When I explain that I've already used the CS3 version I'm informed that the CS3 version           should never be used to try and clean up a CS4 installation since it won't work.
    18:56   I'm informed that TS closes at 19:00 and that he won't be able to finish this call.   However, if I read article kb 401401 I should           find some steps that will solve the issues that I'm experiencing.
    19:01   While looking for the article I inform him that I can't access my TS updates on the           Support Portal and that in a previous call Phone Support was not able to explain          why. Might he have any idea why? He says he'll check it out.
    19:05   "That's odd.  I'll add this complaint to the file."
                Animesh adds that If this knowledge base article does not resolve the issue, I should make sure to call back. He's added a note in the file to automatically escalate my call to Tier3 TS.
                "What? There's a T3?" I ask. "Why has it taken 2 weeks to get this call escalated to tier 3?"
                He apologizes if this taken so long to be escalated but there are definite checks and procedures that need to be followed before a call can be escalated to Tier 3.
    April 15th
    11:10   Starting new uninstall of CS4
    11:20   Uninstaller error with InDesign.
    11:31   Running CS4cleanscript, all options.
    11:49   Completed running CS4cleanscript followed by a manual clean-up of remaining   folders.  Starting a new install.
    12:04   Install error with Flash 10 ActiveX.
    12:06   Install error with Flash 10 plug-in.
    12:37   Installer finished, with errors.
    12:53   Test launched every application in the Suite and they seem to be working in spite of the errors. So be it, I'm never calling Adobe TS again.
    Questions and suggestions to Adobe
    In spite of not having my issue corrected I must say that the politeness of every representative was exemplary.
    While I realise software piracy is a big issue, why is it that pirates don't struggle with your DRM system yet legal users do? Either scrap your current DRM and replace it with something that will not cripple a system if an installation goes wrong or change your installers.
    Software suites are convenient yes but there are now so many modules that come bundled with the suite that seem utterly pointless because the documentation for them is sorely lacking an "at a glance" explanation of features, benefits and purpose. Adobe Air, Sing, Version Cue and Bridge come to mind. Don't you think cutting down on module bloat would make interoperability an easier thing to manage and maintain?
    As a user who has multiple hard drives in his system (one each for the OS, applications and project data) I don't like installers that place files all over my system without my consent. If an installer asks for a destination folder, ALL programs should go into that folder. Files and programs that are shared across the suite for added functionality or registration purposes should ask for a user-specified shared folder (in case there is one) rather than just go into the (assumed) default.
    Why is the Support DB's search function so useless? I've tried (and tried, and tried, and tried...) to find useful solution articles but something is just plain wrong with your search algorithms. I've tested this. Pick an article at random, then do a search for it's title. Too often the search engine won't even find it. The only time searches work is if one has the precise number of the article, such as KB 401401.
    The amount of checks and procedures required for service escalation needs to be streamlined in order to speed up the process. It took too long to get to the right Tier. By the time I was finally escalated to Tier 3 your support services had eroded all of their credibility.
    Practices and procedures (P&P) need to be more uniform. I have one tech telling me to use one version of clean script and claiming it's fine whereas another claims that only the CS4 script would work to resolve my issue. Why is this? What does this reveal about levels of training? There is also large gaps in the knowledge of individual representatives. As should be expected, some representatives knew exactly what to do and how to do it without having to resort to articles every 3 minutes.  Others, such as Sanjay, either need to be retrained or let go. His lack of knowledge was thoroughly exasperating.
    The case id system needs to be reworded. Over these 2 weeks I was given 4 case id's, none of which ended up showing up in the support portal for follow-up.  Furthermore, note taking seems to be a problem because there was a lot of information that just never seemed to make it "in the file".
    Why do calls get transferred to the wrong department so often?
    In Closing
    Due to having more pressing matters to attend to at work and seeing as how I could not afford to spend any more time fixing the harm that was brought on by carrying out the suggested "solutions" I have not called back since April 15th. The suite runs "with quirks" and will stay that way until I rebuild the system because it seems that the only solution that remains regarding the installation woes is to wipe the drive and start from scratch.
    Thank you for reading this whole transcript. I hope it helps you improve your customer service experience.
    Marc-Andre Renaud

    Thank you for the sympathy and the information about the Adobe.com forum Michael.
    I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
    As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
    What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines.  Turns out being honest once again penalised a legal customer.
    If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch.  It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
    Marc

  • Help with design of this home network setup

    Hello all
    My friend's home has internet through Comcast and their modem is an RCA DHG535-2. This modem is currently functional in their office within the home. Their problem is the wireless signal is very weak in their basement. They have purchased a TC and have placed it in their office and wired to their iMac through ethernet. Is their a better way to design this setup so the Time Capsule can provide a broader and better range throughout their home?
    For example,
    1) Can the physical location of the TC change in order to broaden and evenly provide wireless range throughout the home? I would think not since the TC needs to be wired connected to the modem.
    2) Would an Airport Express help out?
    If you can provide a step by step to set this up, I would greatly appreciate this
    Many thanks
    RezF

    Rezf, welcome to the discussion area!
    1) Can the physical location of the TC change in order to broaden and evenly provide wireless range throughout the home? I would think not since the TC needs to be wired connected to the modem.
    Since you mention that the TC is connected to the iMac with an ethernet cable, it sounds like the location options of the TC are going to be somewhat limited. Technically, you could locate the TC anywhere as long it was connected to the modem with an ethernet cable.
    If the office is located in a central area of the home, that would be a good location for the TC
    2) Would an Airport Express help out?
    Possibly. The usual location for an AirPort Express is a point that is approximately 1/2 to 2/3 the distance from the main router (the TC) to the area that needs more coverage. If you have a laptop handy, move it to the proposed location of the AirPort Express and see if you can get a good, stable internet connection at that location. If you can, the AirPort Express should provide improved wireless coverage to the basement.
    If your friends can pull an ethernet cable from the TC to the area in the basement that needs more wireless coverage and connect an AirPort Express to the ethernet cable, that will provide the strongest wireless signal to the specific area.

Maybe you are looking for

  • Canon MP500 connected to AirPort Extreme won't communicate with my desktop

    My Canon Pixma MP500 (which we really like) is connected to my new AirPort Extreme Base station via the USB port. My PC is attached via network cable to the base station. I have a MacBook. When printing to my printer from my PC, the printer doesn't c

  • Date timestamp in a query filter

    Hi, I have date filter in WebI report.  when ever i apply/choose  the dates it's adding time stamp to the query. But that date object doesn't have time stamp at DB table level. still it gives us the correct data irrespective of the time stamp part? T

  • Don,t be fooled into replacing your back light (display) by people who did.

    I found a few webpages on changing the light for pismo,s dimming display and got really excited because I am really handy as long as you can take it apart. I went through the whole deal and and got to my display out of the frame (top cover of laptop

  • How do I "turn off auto renew in Itunes for Magazine subscriptions?

    I need to unsubscribe from three magazine subscriptons.  It says to loginto the Apple store, view my account, manage.  I have done this but dont see an option to "turn off auto renew"  Any help would be appreciated. Thank you. Doug

  • HP touch smart won't fully turn on

    Can't get computer past the welcome loading screen. Can't even get into safe mode. I've tried everything. Unplugging it, ran status thing. I don't want to lose what I have on computer and can't afford to take it in. Computer is a HP touch smart model