Help in inbound idoc posting using bdc
Hi,
We are facing a problem during integration testing to post inbound idocs.
The scenario is :
A custom FM is written to process the inbound idocs, which does the following processes in sequence.
1. BAPI used to create Goods Receipt
2. BDC used to create Delivery using VL01N
3. BDC used to create Handling Unit using VL02N
4. BDC used to create Post Goods Issue using VL02N
The VL01N creates a deivery, and using that delivery BDC calls VL02N to create HU.
In unit testing the idocs are success, but when multiple idocs are used in integration testing, all fails either during delivery creation or HU creation.
The error message we often get when HU is failed is : "Runtime error RAISE_EXCEPTION has occured ".
We have also incorporated a commit work and wait of 5 seconds after each BDC to avoid locking problem if any.
The partner profile is set to ' trigger by background program'.
Standard program RBDAPP01 is scheduled to collect the IDocs in status 64 and then to be processed.
The package size used is 1, inorder to process idocs one by one to avoid locking.
Should any object type be given in RBDAPP01 ?
If so, is it required to maintain any record for that object type in table TBD55 to process idocs serially in RBDAPP01 ?
Any help in this regard is appreciated.
Thanks in advance
Regards
Meena George
Refer these links and see if they are useful:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a66c9507d11d18ee90000e8366fc2/content.htm
Regards,
Ravi
Similar Messages
-
Delay in the Inbound Idoc Posting Process
Dear Friends,
We have an scenario in the Inbound Idoc Posting Process, when we process the Idocs through the standard Inbound Program - RBDAPP01, we face the delay of 3hrs to 12 hrs, approx.
When we try to re-process the same through the manual process, we could successfully post the Idocs, immediately.
When the same happens, through the background job - the delay is happening.
As we see, there is no problem with the program - RBDAPP01, but can't able to trace the delay in the process.
Any suggestions / advises are welcome.
Thanks in advance.Hi Prasanna,
The update will happen only if a value already exists with the same unit of measure in the system. If the quantity is left blank in the system and if you are trying to update, the update might not happen. Even if the value is Zero in the system, provide the same unit of measure as the data used in the BAPI.
Regards,
Yogesh -
Processes in Inbound IDoc posting
Hi guys,
I'm new with IDocs, and I have an object which requires Inbound IDoc posting..
Can you give me the possible steps/processes including the tcodes on how can I solve this object?
Please also include FMs that I might possibly used during my development.
I highly appreciate all your swift responses. Thanks!Hi Mel,
You can use FM IDOC_INBOUND_WRITE_TO_DB to create an inbound IDoc.
CALL FUNCTION 'IDOC_INBOUND_WRITE_TO_DB'
EXPORTING
PI_STATUS_MESSAGE = I_EDIDS
IMPORTING
PE_IDOC_NUMBER = DOCNUM
PE_STATE_OF_PROCESSING = STPROC
PE_INBOUND_PROCESS_DATA = I_TEDE2
TABLES
T_DATA_RECORDS = I_EDIDD
CHANGING
PC_CONTROL_RECORD = I_EDIDC
EXCEPTIONS
IDOC_NOT_SAVED = 1
OTHERS = 2.
Regards,
Chandra Sekhar -
Inbound IDoc Posting Function Module
Give me an example of how to write "Inbound IDoc Posting Function Module".
In my IDOC i have 10 segments each containing 1 field.
How do i create the Inbound IDoc Posting Function Module ??
Is the following code correct ??
FUNCTION ZIDOC_INBOUND.
""Local interface:
*" IMPORTING
*" VALUE(INPUT_METHOD) LIKE BDWFAP_PAR-INPUTMETHD
*" VALUE(MASS_PROCESSING) LIKE BDWFAP_PAR-MASS_PROC
*" EXPORTING
*" VALUE(WORKFLOW_RESULT) LIKE BDWFAP_PAR-RESULT
*" VALUE(APPLICATION_VARIABLE) LIKE BDWFAP_PAR-APPL_VAR
*" VALUE(IN_UPDATE_TASK) LIKE BDWFAP_PAR-UPDATETASK
*" VALUE(CALL_TRANSACTION_DONE) LIKE BDWFAP_PAR-CALLTRANS
*" TABLES
*" IDOC_CONTRL STRUCTURE EDIDC
*" IDOC_DATA STRUCTURE EDIDD
*" IDOC_STATUS STRUCTURE BDIDOCSTAT
*" RETURN_VARIABLES STRUCTURE BDWFRETVAR
*" SERIALIZATION_INFO STRUCTURE BDI_SER
*" EXCEPTIONS
*" WRONG_FUNCTION_CALLED
*DATABASE TABLES
TABLES:LIKPUK.
*DATA DECLARATIONS
DATA: SALES_ORDER_NUM LIKE Z1VBELN.
DATA: DEL_TYPE LIKE Z1LFART.
DATA: ACTUAL_GOODS_MOVEMENT_DATE LIKE Z1WADAT_IST.
DATA: SHIPPING_POINT LIKE Z1VSTEL.
DATA: LOADING_POINT LIKE Z1LSTEL.
DATA: ROUTE_PGI LIKE Z1ROUTE.
DATA: PICK_DATA LIKE Z1KODAT.
DATA: CUST_NO LIKE Z1KUNNR.
DATA: LOCAL_DATE LIKE Z1STDAT.
DATA: TOTAL_GOOD_MOV LIKE Z1WBSTK.
*INTERNAL TABLE DECLARATION
DATA:
IT_LIKP LIKE LIKPUK OCCURS 0 WITH HEADER LINE.
INITIALIZE WORK FLOW
WORK_RESULT = C_WF_RESULT_OK.
LOOP AT IDOC_CONTRL.
MAKE SURE WE HAVE CORRECT MESSAGE TYPE PASSED.
IF IDOC_CONTRL-MESTYP NE 'Z_IDOC_PGI'.
RAISE WRONG_FUNCTION_CALLED.
ENDIF.
CLEAR APPLICATION BUFFERS BEFORE READING NEW ENTRY
CLEAR :IT_LIKP.
REFRESH IT_LIKP.
*PROCESS ALL THE DATA RECORDS IN AN IDOC AND TRANSFER THEM TO
*APPLICATION BUFFERS
INCLUDE MBDCONWF.
LOOP AT IDOC_DATA WHERE DOCNUM EQ idoc_contrl-docnum.
CASE IDOC_DATA-SEGNAM.
WHEN'Z1VBELN'.
SALES_ORDER_NUM = IDOC_DATA-SDATA.
MOVE-CORRESPONDING SALES_ORDER_NUM TO IT_LIKP.
WHEN 'Z1LFART'.
DEL_TYPE = IDOC_DATA-SDATA.
MOVE-CORRESPONDING DEL_TYPE TO IT_LIKP.
WHEN 'Z1WADAT_IST'.
ACTUAL_GOODS_MOVEMENT_DATE = IDOC_DATA-SDATA.
MOVE-CORRESPONDING ACTUAL_GOODS_MOVEMENT_DATE TO IT_LIKP.
WHEN 'Z1VSTEL'.
SHIPPING_POINT = IDOC_DATA-SDATA.
MOVE-CORRESPONDING SHIPPING_POINT TO IT_LIKP.
WHEN 'Z1LSTEL'.
LOADING_POINT = IDOC_DATA-SDATA.
MOVE-CORRESPONDING LOADING_POINT TO IT_LIKP.
WHEN 'Z1ROUTE'.
ROUTE_PGI = IDOC_DATA-SDATA.
MOVE-CORRESPONDING ROUTE_PGI TO IT_LIKP.
WHEN 'Z1KODAT'.
PICK_DATA = IDOC_DATA-SDATA.
MOVE-CORRESPONDING PICK_DATA TO IT_LIKP.
WHEN'Z1KUNNR'.
CUST_NO = IDOC_DATA-SDATA.
MOVE-CORRESPONDING CUST_NO TO IT_LIKP.
WHEN'Z1STDAT'.
LOCAL_DATE = IDOC_DATA-SDATA.
MOVE-CORRESPONDING LOCAL_DATE TO IT_LIKP.
WHEN'Z1WBSTK'.
TOTAL_GOOD_MOV = IDOC_DATA-SDATA.
MOVE-CORRESPONDING TOTAL_GOOD_MOV TO IT_LIKP.
ENDCASE.
ENDLOOP.
selecting data from the database
select * from likp into corresponding fields of table it_likp.
add status record
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = it_likp-VBELN.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = it_likp-VBELN.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-LFART.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-LFART.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-WADAT_IST.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-WADAT_IST.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-VSTEL.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-VSTEL.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-LSTEL.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-LSTEL.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-ROUTE.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-ROUTE.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-KODAT.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-KODAT.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-KUNNR.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-KUNNR.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = SY-DATLO.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = SY-DATLO.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
IF SY-SUBRC EQ 0.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '53'.
IDOC_STATUS-MSGTY = 'I'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '004'.
IDOC_STATUS-MSGV1 = IT_LIKP-WBSTK.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
ELSE.
IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
IDOC_STATUS-STATUS = '51'.
IDOC_STATUS-MSGTY = 'E'.
IDOC_STATUS-MSGID = 'YM'.
IDOC_STATUS-MSGNO = '005'.
IDOC_STATUS-MSGV1 = IT_LIKP-WBSTK.
APPEND IDOC_STATUS.
CLEAR IDOC_STATUS.
WORKFLOW_RESULT = C_WF_RESULT_ERROR.
RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
APPEND RETURN_VARIABLES.
CLEAR RETURN_VARIABLES.
ENDIF.
endloop.
endfunction.Hi,
First goto WE20-> click on the logical system , now select the receiver LS which you are using as your partner. Now in the inbound parameters cehck what is the process code is attached.
once you get the process code then go to WE42 tcode.. there you give the process code and then double click you will get the function module IDOC_INPUT_FIDCMT.
Hopw you got my point.
Regards,
Nagaraj -
Ergent help about inbound IDoc for Goods Receipts
Dear friends
We have an ergent issue needing your help.
It is about DEVRY03.
Senarios is as following:
When we create a delivery by using VL31n, system try the IDoc and transfer to XI.
This is ok.After external warehouse system processes the IDoc,a message is sent back to SAP to post the goods receipts for the delivery.
Inbound IDoc type is DEVRY03. Is it right?
Which function module or which process ok is used for this senario?
Can anyone suggest how to do it?
MinghanHi !
Here comes some information for the INBOUND idocs....
There is a IDOC for transmitting goods movements from a legacy system.
It's message-type is: WMMBXY
IDOC-Type is: WMMBID02 (See we60 for it's pretty good docu....)
Prcoess-Code is :WMMB
The function that processes the data is: L_IDOC_INPUT_WMMBXY
Hope that helped a bit (for inbound)....
Regards
Rainer
Some points would be nice if that helped. -
How to change field values AFTER Inbound IDOC Posted successfully
Hi SAP Experts,
In my project I receive the inbound IDOC PORDCR05 from PI and posted as an Purchase Order in ECC.
I create the Z process code and Z function module (which is a copy version of IDOC_INPUT_PORDCR) and complete all the necessary configuration steps. It works perfectly.
My problem is: I have to collect some inbound idocs (that satisfied some criteria) and change the value of field EKPO-TXJCD and EKKN-KOSTL of the PO AFTER it posted successfully (means the purchase order is created and save in database).
How can I do this? I've try to put the logic code in Z function module, but it does not work, since at that time, the Inbound IDOC is not updated to the database yet.
Aprreciate your advise.
Regards,
Elaine.Hi Elaine ,
as per your cretiria pick the idocs and take created PO# from status 53 & use the BAPI (BAPI_PO_CHANGE) to change the neccessary values in the PO. We can't reprocess those idocs again.
Reddy -
I am developing a function module in ECC that will be used to post inbound IDOC for customer creation DEBMAS07
The logic is as follows -
The function receives an IDOC structure
It then invokes function module 'IDOC_INPUT_DEBITOR'
IDOC_INPUT_DEBITOR takes care of creating a new customer in table KNA1. But I was expecting IDOC_INPUT_DEBITOR to also handle the IDOC posting. This way I can go to WE02 and see a new IDOC record. What am I missing? Is there some more code I need to write after the function module call?
Thank you.
* IDOC structures for using ALE
data lc_no_display type bdwfap_par-inputmethd value ' '.
data lt_idoc_control type standard table of edidc.
data ls_idoc_control type edidc.
data lt_idoc_data type standard table of edidd.
data lt_idoc_data_knvi type standard table of edidd.
data lt_idoc_status type standard table of bdidocstat.
data ls_idoc_status type bdidocstat.
data lt_return_variables type standard table of bdwfretvar.
data lt_serialization_info type standard table of bdi_ser.
data lv_workflow_result type bdwf_param-result.
data pi_idoctyp type edi_iapi00-idoctyp.
data pt_segments type standard table of edi_iapi11.
data lw_segments type edi_iapi11.
data ls_idoc_data type edidd.
data ls_e1kna1m type zdebmas07_e1kna1m.
data e1kna1m type e1kna1m.
*** CONTROL DATA
ls_idoc_control-mandt = input-idoc-edi_dc40-mandt.
ls_idoc_control-status = input-idoc-edi_dc40-status.
ls_idoc_control-doctyp = input-idoc-edi_dc40-idoctyp.
ls_idoc_control-direct = input-idoc-edi_dc40-outmod.
ls_idoc_control-rcvprt = input-idoc-edi_dc40-rcvprt.
ls_idoc_control-rcvprn = input-idoc-edi_dc40-rcvprn.
ls_idoc_control-stdmes = input-idoc-edi_dc40-stdmes.
ls_idoc_control-outmod = input-idoc-edi_dc40-outmod.
ls_idoc_control-sndpor = input-idoc-edi_dc40-sndpor.
ls_idoc_control-sndprt = input-idoc-edi_dc40-sndprt.
ls_idoc_control-sndprn = input-idoc-edi_dc40-sndprn.
ls_idoc_control-mestyp = input-idoc-edi_dc40-mestyp.
ls_idoc_control-idoctp = input-idoc-edi_dc40-idoctyp.
append ls_idoc_control to lt_idoc_control.
*** READ SEGMENTS
pi_idoctyp = ls_idoc_control-idoctp.
call function 'IDOCTYPE_READ_COMPLETE'
exporting
pi_idoctyp = pi_idoctyp
tables
pt_segments = pt_segments
exceptions
object_unknown = 1
segment_unknown = 2
relation_not_found = 3
others = 4.
loop at pt_segments into lw_segments.
case lw_segments-segmenttyp.
when 'E1KNA1M'.
ls_idoc_data-segnam = 'E1KNA1M'.
ls_idoc_data-mandt = sy-mandt.
ls_idoc_data-segnum = lw_segments-nr.
ls_idoc_data-psgnum = lw_segments-parpno.
ls_e1kna1m = input-idoc-e1kna1m.
move-corresponding ls_e1kna1m to e1kna1m.
move e1kna1m to ls_idoc_data-sdata.
append ls_idoc_data to lt_idoc_data.
exit.
endcase.
endloop.
*** IDOC INPUT CALL FUNCTION
data: response type zsi_create_customer_is_res_tab.
data: response_lwa type zsi_create_customer_is_respons.
data: lwa_error_message type string.
call function 'IDOC_INPUT_DEBITOR'
exporting
input_method = lc_no_display
mass_processing = space
importing
workflow_result = lv_workflow_result
tables
idoc_contrl = lt_idoc_control
idoc_data = lt_idoc_data
idoc_status = lt_idoc_status
return_variables = lt_return_variables
serialization_info = lt_serialization_info
exceptions
wrong_function_called = 1
others = 2.Hello Megan,
Check with the function modules
EDI_DATA_INCOMING
IDOC_WRITE_AND_START_INBOUND
Program:
RBDAPP01
I guess this would answer your query.
Regards,
TP -
Inbound idoc posting directly even with 'Trigger by background' option
We have inbound idocs coming into ECC from Siebel via PI. The partner profile is setup for "Trigger by background program' .So that we can run the job RBDAPP01 to sweep these status 64 idocs. But we don't get a chance as the idocs are getting posted directly(its already in status 51 or 53) as if we used the 'Trigger Immediately' option. Where could the problem lie ? Is there a possibility of some RFC call from PI overriding the Partner Profile config ? Any advice or useful tip is welcome!
thanks,
SHi,
I guess you can still check in the control record for EDIDC-EXPRSS - Overriding in inbound processing, the documentation of the Data Element EDI_EXPRSS is as below
Short Text
Overriding in inbound processing
General
This field determines for ALE whether a time schedule is to be deactivated for inbound processing and replaced by immediate processing.
Regards,
Chen -
Error in Accounting document Posting using - BDC
While creatind document in FB01 using BDC
PERFORM fill_dynpro_fields1 USING:
co_true co_program '0100' lit_bdcdata,
space 'BKPF-BLDAT' it_bkpf-bldat lit_bdcdata,
space 'BKPF-BUDAT' it_bkpf-budat lit_bdcdata,
space 'BKPF-BLART' tp_type1 lit_bdcdata,
space 'BKPF-BUKRS' it_bkpf-bukrs lit_bdcdata,
space 'BKPF-WAERS' it_bkpf-waers lit_bdcdata,
space 'BKPF-XBLNR' it_bkpf-xblnr lit_bdcdata,
space 'RF05A-NEWBS' lco_postkey lit_bdcdata,
space 'RF05A-NEWKO' it_bseg-kunnr lit_bdcdata,
space 'BDC_OKCODE' co_intro lit_bdcdata,
co_true co_program '0301' lit_bdcdata,
space 'BSEG-WRBTR' it_bseg-wrbtr lit_bdcdata,
space 'BSEG-ZTERM' it_bseg-zterm lit_bdcdata,
space 'BSEG-SGTXT' it_bseg-sgtxt lit_bdcdata,
space 'RF05A-NEWBS' lco_postkey1 lit_bdcdata,
space 'RF05A-NEWKO' it_bseg-kunnr lit_bdcdata,
space 'BDC_OKCODE' co_intro lit_bdcdata,
co_true co_program '0301' lit_bdcdata,
space 'BSEG-WRBTR' it_bseg-wrbtr lit_bdcdata,
space 'BSEG-ZTERM' it_bseg-zterm lit_bdcdata,
space 'BSEG-SGTXT' it_bseg-sgtxt lit_bdcdata,
space 'BDC_OKCODE' co_intro lit_bdcdata.
I am getting message like bseg-wrbtr input value is longer than screen field. but i have declare it as same type as above space 'BSEG-WRBTR' it_bseg-wrbtr lit_bdcdata,
Can you help me.
Always use proper subject lineHi Vijay ,
I have one more problem regarding same please help me.
In the program i am calling the transaction FB01 twice and two different document is created of SA and DA type.
After the program is executed i can only see the DA document created log message. But the SA document(message) is getting suppressed but the document is getting created .
How can i get the both document no at a time once i run the program. -
Inbound idoc processing using custom FM to cancel sales orders
hello all,
I have a scenario where i need to create a customized function module which is assigned to custom message type. and this function module is triggered when inbound idoc comes, which will process idoc data for cancellation of sales orders. If an errror occurs than the error during cancellation has to be reflected back in the idoc status.
can anyone tell me how exactly i can log the status and reflect it back, how exactly can i do this
And what are all the objects i need to create to succusfully execute this scenario, i have created message type, function module, i am using orders05 do i need to create process code also.
Thanks,
krishnam raju.Hi Krishna,
Hope you are done with the Inbound function module creation. But, just creation of function module would not be enough, what u said that is like creation of Process code should also be done.
WE42 is the transaction code for inbound process code.
And while creation of the process code, we need to do few things like:
We need to create an entry of the inbound function module in BD51 transaction or so. And coming to updating of the status, open any of the inbound function module, you will observe that there is a standard subroutine which will update the IDOC_STATUS record. You can implement the same logic whenever you want to update an error message.
Thanks,
Adithya K -
Transaction VRRE not able to post using BDC
am doing a BDC for returns delivery for RMA and the OK-CODE shows up for the first screen of transaction VRRE i.e. SAPMV45A screen 130 but when i go to the next screen i.e SAPMV50A screen 200 the OK-CODE box does not show up on this screen. If I type the OK-CODE in the command field it works but it does not show up automatically as it has to in a BDC. Even by recording this transaction and playing it again I have the same problem of the OK-CODE not showing up on this particular screen.
I get the error message 'No Batch I/P data for screen SAPMV50A 200'.
Please let me know if anyone has done a BDC for VRRE or what is the alternative to post this transaction.You already opened another post for the same requirement? Please continue to use the same one and do not duplicate the effort.
Please close one of the posts.
What okcode are you passing for the initial screen 130? Also please post your BDC code for the first two screens(130 and 200).
Thanks,
Srinivas -
Need help in INBOUND idoc generation function module!
Can anyone send me the inbound idoc function module !
i have the outbound code but i need the inbound codeMight be a constant C_WF_RESULT_OK is assigned to
variable WORK_RESULT .
Please check if they are declared in the function module .. -
Collecting or time based inbound idoc posting
Dear All,
We have need of posting idoc's in a specific time interval in SAP ECC system. Please help us.
requirement is We are pushing idocs to ECC , but the idoc should get process only between 3 Pm to 6 PM.
Kindly help us.
Regards
Pradeep P Nhello pradeep,
Schedule a Background job whenever you get the IDOC in to SAP .Run the Job at specific time.
We had a similar scenario where we had to post it after 24 hours.
sample code ......
start_time = "when ever you want".
WRITE docnum TO name.
SHIFT name LEFT DELETING LEADING '0'.
CONCATENATE 'POST_IDOC_' name INTO name.
CONDENSE name.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
Fill idoc number
r_docnum-low = docnum.
r_docnum-sign = 'I'.
r_docnum-option = 'EQ'.
APPEND r_docnum.
Fille message type
r_mestyp-low = mestyp.
r_mestyp-sign = 'I'.
r_mestyp-option = 'EQ'.
APPEND r_mestyp.
Manual processing of IDOCS
SUBMIT rbdmani2 WITH so_docnu IN r_docnum
WITH so_mesty IN r_mestyp
WITH p_output = ''
WITH p_wodial = 'X'
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
sdlstrtdt = start_date
sdlstrttm = start_time
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " POST_IDOC_DAYS_LATER
Thanks,
Pradeep. -
Pls help me to create SO using BDC for multiple line items (VA01)
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
Pls help me this is urgent requirement.
[email protected]
Thanks & Regards,
J.LokeshIf u want to add Items data, u have to handle the Table control by writing the complete code.
U have to write code for 2 items, when u press enter u will get new row to enter new record one by one.
Narendra -
Enhancement for inbound idoc posting(idoc_input_ordrsp)
hi,
please find solution for the below.
business senario: when the vendor send purchase order confirmation through idoc a automated acknowledgement has to be send.
technical: when vendor send idoc (orders05) it updates with FM (idoc_input_ordrsp) our system.
but in the idoc a segment E1EDP19 will have the field IDNLF which has to be filled to send a acknowledgement .
in my case:
the user some times will fill the segment so to get automated acknowledgement we have to write an enhacement to populate the segment in inbound FM.
i have written code in EXIT_SAPLEINM_007. and populated the data in internal table. but the changed data in internal table is not reflecting in processed idoc(in we02 direction 2).idoc_data is the intenal table which hold all the segment data in run time.
now i fetched matnr from ekpo table populated E1EDP19
and modified the internal table by adding idoc_data-sdata when idoc_data-segnam is E1EDP19 .
ultimately the sdata is reflecting in the idoc_data-sdata for the segment.
but when we check in we02 for the processed idoc the changes are reflecting.
give me a solution for the data to reflect in processed idoc.
Maybe you are looking for
-
I keep getting a "Blocked Plug-in" message whenever I try to play a video clip from YouTube or Facebook. I have tried downloading the latest updates from Adobe and they appear in my Downloads list, but I still can't open the videos. I checked my Pre
-
Hi! I have some general questions about jsp and servlets. I develop an internetbased portfoliosystem which uses ejb to extract data from an oracle database. q1: How can I create a controlling servlet for page direction? q2: How can my jsp file connec
-
Expired subscription clean up job failing
the history message from the step: Date 19/11/2014 08:41:11 Log Job History (Expired subscription clean up) Step ID 1 Server TV-SQL1 Job Name Expired subscription clean up Step Name Run agent. Duration 00:00:01 Sql Severity 16 Sql Message ID 1934 Ope
-
Adobe Application Manager - Instllation Failed - Adobe Acrobat XI Pro
Error message is as follows: Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Paylo
-
Hi, I have a for loop and an array outside the for loop. In each iteration some values are sent to the array. For example, after first loop, I send following data to array: 2 3 4 5 4 5 6 7 after the second loop, other data send to array again and wil