HELP!  JOB ON THE LINE-  Need to import fields from one document to another document

In a nutshell I have a set of documents and we now have a new structure for those documents. Either I have to cut and paste all the data from one to another or figure out how to import fields to another document.
I have two documents. Both are different but require the same information. Basically I need to have one file with fields import specified fields from another document. Ex., Name on document 1, I need the file to know to get the Name field on document 2 and import it into the specified field on document 1. I will have multiple fields that need to do this importing. I REALLY NEED TO FIGURE THIS OUT B/C I HAVE A TON OF DOCUMENTS THAT NEED TO BE COMPLETED.

If you are talking about the field structure, not the content that Bernd commented on, make a copy of the document with the fields. Open the file and use replace pages to replace the pages with the new document layout. After you have replaced the pages, you will have to select the field tools and move the fields to the proper location. If the form was made in Designer, I am not sure of the process. There is likely a similar process in Designer, but I don't use Designer and can't comment. You may have to go to the Designer forum in such a case, unless other Acrobat users here can help.

Similar Messages

  • Do I have to be on the internet to import library from one computer to another ?

    Do I have to be on the internet to import library from one PC to another ?

    What library? Do you mean you iTunes Library? If so, then no, you don't have to be on the Internet. You only have to copy the library to an external disk, then restore it on the other computer.
    Back up your iTunes library by copying to an external hard drive
    Also, see:
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.

  • What are the diffrent ways to copy data from one application to another?

    Hi,
    Can you guys tell me what are the different ways to copy data from one application to another application??
    I know we can do it through script logic using DESTINATION_APP.
    Is there any other way to copy data from one application to another application?
    Please help me
    Thanks,
    Charly

    You can also call a custom DTSX package in SSIS via the datamanager.
    there are at least 5 ways of transfering data in BPC between apps.
    1. Through the front end (excel etc) via evdre/evsnds
    2. Through Script logic using *Dest App
    3. Using BPC's standard export dtsx package via DM
    4. Using SSIS using BPC's custom SSIS tasks
    5. Through Script logic using stored procs.
    i am sure people will come up with more.
    remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

  • Import package from one project into another

    Hello everyone,
    I have some projects.
    An enterprise and war project created in netbeans.
    I would like to use some files from one project to another. when I import
    the package I get the error-
    'package x does not exist'
    I have added the package to the project but I still get the error.
    I have also added the project to import to my glasspath but still.
    E.g.
    set classpath
    .;c:\enterpriseA;
    My next idea is to create a war project into my enterprise project and copy the files
    from the war project into it in order to use it. But I'm sure there is a better way.
    THanking you in advance.
    eve
    Edited by: evepokua on Nov 22, 2009 1:44 PM

    One mistake I keep making is that I don't add the package to the
    Dependencies of the plugin I'm writing. You have to go to plugin.xml,
    and add the package you depend on to the Dependencies section. Maybe you
    didn't do this?
    Michael
    nasti wrote:
    > Hello everybody!
    > I am new user of osgi and eclipse. I tried to do some of Oscar examples
    > but I had some problems. Namely, the problem in import of package from
    > one project into another in Eclipse.
    > I add first project to the Build Path of the second one.
    > I add to the first project manifest line: Export-Package example2.service.
    > I add to the second project manifest line: Import-Package example2.service.
    > But when I tried to execute these bundles the
    > java.lang.NoClassDefFoundError was occurred. May be you will help me
    > with this problem.
    > Thanks....
    >
    >

  • Importing values from one spreadsheet to another

    I have created 2 Numbers spreadsheets to track my vacation expenses this year.  Is it possible to automatically import a value from one spreadsheet into another? They are both in the same workbook, one keeps track of mileage and fuel expenses, and the other keeps track of all other expenses.
    Thanks in advance for your help.
    -Nancy

    Hi Nancy,
    To reference a cell on a different sheet or table, when you come to the point in your equatino where you need the address of the remote cell, just navigate to the remote cell and click on it, then continue typing or hit Return if that is the last item in the equation.
    Of course you can also just enter the remote address manually. The syntax is Sheetname :: Tablename :: Cell.
    If the table name is unique in the document, it is not necessary to use the sheet name.
    About the names of things in Numbers - a little different than in Excel.
    The entire document is referred to by Apple as a Spreadsheet, just to be consistent with the industry. I believe you called it a Workbook, an Excel term. Most folks here simply call it a Numbers Document.
    What you called a Worksheet is a "Sheet" in Numbers.
    Within a Sheet you can have multiple Tables, Graphics, Text Boxes, etc.
    In Numbers, Tables are treated like Named Ranges in an Excel Worksheet. They should be kept to just the size needed for the data, and it's best to isolate separate collections of data in separate tables.
    Regards,
    Jerry

  • How do I drag-and-drop my Web Bookmarks Folder to a external flash drive? I need to move them from one Mac to another Mac.

    '''Moving Firefox URL Bookmarks from one Mac to another'''
    How do I drag-and-drop my web 'Bookmarks Toolbar' folder from one Mac to an external USB zip drive. Unable to network both Macs and use the migration feature. Must do this manually. Thanks!

    Hi RMcMullen,
    You should look at the [[Backing up your information]] Knowledge Base article. It will give you all the information you need to back up everything so you won't lose a thing.
    Hopefully this helps!

  • Need to paint objects from one applet into another

    Maybe this question is more at home here; I have an applet test program which uses the timer class to make a car drive across the screen. The test works fine with the rectangle I used, but now I need to use the car created in this class:
       import java.applet.Applet;
       import java.awt.Graphics;
       import java.awt.Graphics2D;
       import java.awt.Rectangle;
       import java.awt.geom.Ellipse2D; 
       import java.awt.geom.Line2D;
       import java.awt.geom.Point2D;
         public class Car extends Applet
              public void paint(Graphics g)
                   Graphics2D g2 =(Graphics2D)g;
                   Rectangle body =new Rectangle(100, 110, 60, 10);
                   Ellipse2D.Double frontTire =new Ellipse2D.Double(110, 120, 10, 10);
                   Ellipse2D.Double rearTire =new Ellipse2D.Double(140, 120, 10, 10);
                   Point2D.Double r1 =new Point2D.Double(110, 110);
                   //the bottom of the front windshield
                   Point2D.Double r2 =new Point2D.Double(120, 100);
                   //the front of the roof
                   Point2D.Double r3 =new Point2D.Double(140, 100);
                   //the rear of the roof
                   Point2D.Double r4 =new Point2D.Double(150, 110);
                   //the bottom of the rear windshield
                   Line2D.Double frontWindshield =new Line2D.Double(r1, r2);
                   Line2D.Double roofTop =new Line2D.Double(r2, r3);
                   Line2D.Double rearWindshield =new Line2D.Double(r3, r4);
                   g2.draw(body);
                   g2.draw(frontTire);
                   g2.draw(rearTire);
                   g2.draw(frontWindshield);
                   g2.draw(roofTop);
                   g2.draw(rearWindshield);
         }The only thing I could think of was making an object of type Car in the test program and then doing something like this:
    Car c =new Car();
    g2.draw(c.paint(g));
    But it says in the test program void type not allowed here. Any tips as to what I'm doing wrong? My guess is that its a problem in the Car class and not the test program, but I didn't think I was supposed to alter Car. (Plus I tried already and couldn't get it to work.)

    what? I don't see what you are trying to do..
    You are trying to make an instance of a class which has no constructor?
    You are trying to move a Panel (an Applet is a subclass of Panel) in another Panel (in Test class?)
    Keep in mind that the Panel automatically has flow layout. In flow layout the components are sized to minimum size, and if the component is another Panel, the minimum size is 0 if there are no components in it.
    Do you need both applets open at once?
    Why not just copy this paint code into your test class?
    Also note that you CAN copy the Graphics from one component onto another, but the Graphics object cannot be null, or you will get a NullPointerException... which is what will happen if you try to copy it in the init() of your test class.
    Why not just make your car a Component (or a Panel even) and give it a constructor? (And make sure to set minimum size to something other than zero?)
    I think you have more than one problem..
    Jen

  • I have never used PS, and I am trying to edit a brochure created by someone else.  I need to move text from one column to another

    I have never used PhotoShop and do not have time at the present. Please help me to move a section of text from one column to another in a brochure.

    Here are 3 options for future reference:
    1. With the setup you've described, apply a Match Move behavior to  the text and make the rectangle the source. Change the Transform parameter to Mimic source.  This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
    2. Use a group to do the animation.  Put both your rectangle and text in the same group and animate the group's postion.
    3. Use the Link behavior.
    Each of these has it's advantages depending on what you need.

  • IPhoto 7.0 -importing photos from one Mac to another

    My wife and I recently went on vacation and took many photos that we down-
    loaded to her MacBook. Now that we are home, I want to download a portion of these photos to my iMac. Is it possible to import these vacation photos from her MacBook directly to my iMac, or do I need to 'Burn' several disks on the MacBook first then download these to the iMac? Harv66

    Harv66
    Welcome to the Apple Discussions.
    are those pics in iPhoto on her machine? If so, network the two machines together and use iPhoto Library Manager to move them from one library to another.
    Regards
    TD

  • HOW TO GET THE SELECTED VALUE IN A ROW FROM ONE VIEW TO ANOTHER VIEW?

    hi all,
    I  have a small issue.
    i have created two views.In the table of the first view i'm selecting a row and pressing the button it will move to next view.
    i am adding some fields manually in the table of the second view and pressing the save button.Here all the values should get updated corresponding to the field which i have selected in the first view.
    I want to know how to get the particular field in the selected row from one view to another view.
    Kindly help me.

    Hi,
            Any data sharing accross views can be achiveved by defining CONTEXT data in COMPONENT CONTROLLER and mapping it to the CONTEXT of all the views. Follow the below steps.
    1. Define a CONTEXT NODE in component controller
    2. Define same CONTEXT NODE in all the views where this has to be accessed & changed.
    3. Go to CONTEXT NODE of each view, right click on the node and choose DEFINE MAPPING.
    This is how you map CONTEXT NODE and same can be accessed/changed from any VIEW or even from COMPONENT CONTROLLER. Any change happens at one VIEW will be automatically available in others.
    Check the below link for more info regarding same.
    [http://help.sap.com/saphelp_nw04s/helpdata/EN/48/444941db42f423e10000000a155106/content.htm]
    Regards,
    Manne.

  • What is the best practice to migrate files from one profile to another?

    I am increasing having to move from one created local profile machine to an active directory joined mobile account.  What is the best way to migrate the files from one profile to another?

    Some answers below:
    1. Yes, you should use snapshots (right click on t he object and select create snapshot or on the project menu, select Change Manager for a centralized snapshot management).
    2. See above.
    3. Usually you will export the (test/development) design repository to an mdl file, and import it into the other (production) design directory. Then you will deploy the code from the other design directory into the production target (runtime).
    2.1 From 9.2 on, you will have to deploy to file and then use OWB scripting (OMBPlus) to deploy the generated file outside of the deployment manager.
    2.2 Not sure what is asked in this question - can you rephrase?
    2.3 No, but the creation and use of thes will not be managed and audited by OWB (Runtime Audit Browser)
    3.(bis) The target owner.
    Regards:
    Igor

  • Need to move music from one computer to another

    Wondering how to move my music from one computer to another. My laptop is being replaced and need to move all my iTunes items from here to a desktop. What is the best/most cost effective way to do this? TY

    It is very easy. First get something to transfer your itunes file to the laptop (network$, thumb drive$$ (depending the size), external hard drive$$$ with cost of drive and plus a case it can be costly). Those are in order of slowness! After all those files are on the desktop download itunes. DO NOT download itunes first you will be begging for trouble. Open itunes and it will take a few seconds and it should find the file on it's own. Now all you need to do is sign into itunes agree to all the fun stuff and there you go. I did mine with an external Sata hard drive via esata and it could not of been easier. To find the file you need go into music/my music and find the big file named itunes. just copy and past and let er rip.
    Good luck

  • Can't View the Imported Reports From one machince to another one

    Hi,
    Thanks in advance.
    I have installed the OracleBam in two different machines in different domains.
    i have exported the reports the from one machine and imported that reports into another machine, But the imported reports are not shown in the active studio and the active viewer.
    Awaiting for the Reply......

    Hi, I encountered this problem in one of my BAM installtion, the reason was the user names of BAM. They should be identical (small / capital letter) in both systems.
    Hope this help you
    Ciao
    hz

  • How do I Import Bookmarks from one profile to another ? I have tried searching online but I can find no "bookmarksbackups" folder and no "places.sqlite" Thanks

    Hi,
    I was wondering how to Import Bookmarks from an old firefox profile to a new one ? My laptop stopped working but I managed to copy my firefox data from the mozilla appdata folder. I want to now copy my old bookmarks to my new firefox profile on my new laptop. I have tried searching online for guidance but most methods mention a "bookmarksbackups" folder and a "places.sqlite" file. However, I can find no "bookmarksbackups" folder and no "places.sqlite" file. Among the files in profile I am trying to import FROM are a "bookmarks" html file(which seems to only contain the default firefox bookmarks) as well as "places.sqlite-shm" and "places.sqlite-wal" files. Although, the NEW profile on my new laptop I am trying to import TO DOES have a "bookmarksbackups" folder and a "places.sqlite" file.
    I would be most grateful for any help received. Many thanks in advance for your help and for your time

    ''the-edmeister [[#answer-668475|said]]''
    <blockquote>
    f458italia,
    Per your screenshot - you don't have the /bookmarksbackup/ folder nor the places.sqlite file - your bookmarks don't exist in that old Profile. ''cor-el mentioned another file that is missing, so that Profile wouldn't have been operational.''
    Are you sure that you don't have another Profile for that user account?
    beemarco,
    Sorry that we missed your question over here:
    https://support.mozilla.org/en-US/questions/1036975
    I'll provide an answer for you in that thread.
    </blockquote>
    '''Thank you for your reply. If my bookmarks etc. were to unknowingly be saved in another profile how could I find/access this profile? Many thanks in advance '''

  • Import JSPs from one project to another (depends on or ??)

    I'd like to solve the large product problem: Broke up into several projects.
    The problem is most evident in unit testing with the internal container. Any jsp includes
    or forwards to JSP's in other projects just is not supported with local testing.
    I'd be very happy to live with the same solution I'm using for classes from other projects.
    I.E. a Project library that points to the output path of another project.
    The deployment config for project B who depends on project A's classes, includes the classes
    from A into the projB.ear.
    I can live with this. It supports use of Tester and Local running of JSPs.
    I'd like the same solution for JSPs too.
    I'm happy to forgo the URL distinction that's possible by deploying all modules to an
    external container. I'd be willing to live with all JSP's in proj A accessed as if they
    where local to proj B.
    Anybody have a solution?
    At present I'm living in HELL, with JSP src in both places. As the project grows into
    more modules, replication from A to B-->E just won't work. Plus, as JDev and SCM go,
    someone always screws up and adds these copied files to SCM and the project.
    It's currently a mess!
    Thanks, curt

    Although classes have the notion of a classpath, the HTML Root directories from several projects cannot be strung together like that. The OC4J server does not support multiple document roots for a single web module.
    There are a few possibilities for you though:
    1) Change the settings of each project so that they all point to the same HTML Root directory. In this configuration, a WAR profile in any one of the projects will deploy the entire contents of the HTML Root directory.
    2) If you can't put all the JSPs in the same HTML Root directory, formalize the boundaries between the web modules by defining a "J2EE Web Context Root" for each project according to your exact need. Then when JSPs include or forward to each other, use URIs that contain the context root as part of the URI.
    3) Keep everything in one project, but separate the JSPs into different directories. Then to get a filtered view of your JSPs in the JDev navigator. switch the navigator into "Category view" (Project | Show Categories). You can then selectively drill into a specific directory. If you select the project and then choose View | Display in New Navigator, you can get a separate navigator whose scope is narrowed onto your specific project.
    Hope that helps. If you have any specific suggestions on enhancements that would improve your productivity in this area, please let us know.

Maybe you are looking for